Construction of 62 Senior Resident Doctor Hostel in Pt. JLNMC and Hospital Chamba at Sarol in Distt. Chamba (SH Const. of Building portion, WS and SI, rain water harvesting , Site development work, boundary wall

Excavation work /cutting by mechanical means (Hydraulic excavator)/ manual means in all heights and depths and in all kinds of soil including saturated soils comprising of pick work, jumper work, pick jumper work, blasting work both in soft and hard rock, chiseling / wedging out of rock (Where blasting is prohibited) and their intermediate classification of soil setting out true to the required lines, grade, width, cutting and trimming of side slopes as shown in the drawing and if water is met within the excavation due to springs, seepage, rain and other causes it shall be removed by the suitable diversion pumping or bailing out and excavation shall be kept dry wherever so required by the contractor at his own cost as directed by the Engineer-in-charge and disposal of all surplus excavated soil in acquired width or at an approved dumping site including its stacking leveling dressing including all leads and lifts by head-load, mechanical transportation or by any other mode of transportation with all cost of labours, machineries and other incidentals to complete the work as per HPPWD specification. Any loss to the public and private property during the course of execution and disposal of unserviceable material shall be absolute responsibility of the contractor which shall have to be compensated by him in all cases.The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Excavation in foundation and trenches in all heights and depths and in all kinds of soil including saturated soils comprising of pick work, jumper work, pick jumper work, blasting work both in soft and hard rock, chiseling / wedging out of rock (Where blasting is prohibited) and their intermediate classification of soil setting out true to the required lines, grade, width, cutting and trimming of side slopes as shown in the drawing and if water is met within the excavation due to springs, seepage, rain and other causes it shall be removed by the suitable diversion pumping or bailing out and excavation shall be kept dry wherever so required by the contractor at his own cost as directed by the Engineer-in-charge and disposal of all surplus excavated soil in acquired width or at an approved dumping side including its stacking leveling dressing including all leads and lifts by head-load, mechanical transportation or by any other mode of transportation with all cost of labours, machineries and other incidentals to complete the work as per HPPWD specification. Any loss to the public and private property during the course of execution and disposal of unserviceable material shall be absolute responsibility of the contractor which shall have to be compensated by him in all cases.The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in foundation, footing, basis of columns etcetra and mass concrete including carriage of material within all leads and lifts and as per the direction of the engineer-in -charge and other incidentals.The rate is including the octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centering and shuttering with steel plate including strutting, propping etcetera and removal of form work for retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etcetera as per the directions of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals and further as per specification, approved Drawing & Design.The rate is including the octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Columns, pillars, posts and struts square rectangular or polygonal in plan including carriage of material within all leads and lifts and as per the direction of the engineer-in -charge and other incidentals. The rate is including the octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Beams, cantilever, girders and lintels. Sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels upto all depth and in all heights from floor including carriage of material within all leads and lifts and as per the direction of the engineer-in -charge and other incidentals. The rate is including the octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Flat surfaces such as soffits of suspended floors, roofs, landings and the like floor etcetra upto any thickness including carriage of material within all leads and lifts and as per the direction of the engineer-in -charge and other incidentals. The rate is including the octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Stair cases with sloping or stepped soffits excluding landing including carriage of material within all leads and lifts and as per the direction of the engineer-in -charge and other incidentals. The rate is including the octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling upto any heights and removal of the same for insitu-reinforced concrete and plain concrete work in Edges of slabs and breaks in floors and walls upto all width and heights including carriage of material and other incidentals within all leads and lifts and as per the direction of the Engineer-in-charge. The rate is including the octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, , GST and any other taxes imposed by the Government.

Providing and laying cement concrete 1:2:4 (One cement isto two sand isto four graded stone aggregate)20mm (twenty millimetre) nominal size and curing complete excluding cost of form work in foundation and plinth complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated plain cement concrete 1:4:8 (one cement isto four sand isto eight graded crushed stone agreegate 40 mm (forty millimetre) nominal size) including curing complete excluding the cost of form work in all work up to plinth level including carriage of material, within all leads, lifts and other incidentals as per the direction of the Engineer-in-charge and as per specification, approved Drawing & Design complete. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated plain cement concrete 1:5:10 (one cement isto five sand isto ten graded crushed stone agreegate 40 mm (forty millimetre) nominal size) including curing complete excluding the cost of form work in all work up to plinth level including carriage of material within all leads, lifts and other incidentals as per the direction of the engineer-in -charge.The rate is including the octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated plain cement concrete 1:4:8 ( One cement is to four sand is to eight graded crushed stone aggregate 40mm (forty millimetre) nominal size on ground or under water including pumping or bailing out water( surface and sub soil water), dewatering for all heights /depths and any quantum of water including removal of slush which may arise at the time of laying concrete for all heights/ depths, including the cost of form work and curing for 14 ( fourteen) days complete in Retaining walls and Breast walls etcetera as per drawings and MORD technical specification section 800, 900 and 1200 and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing 100mm (Hundred millimeter) diametre PVC pipe Weep holes in brick masonry/stone masonry, plain/reinforced concrete abutments, wing walls return walls and retaining /breast walls etcetra, extending through the full width of the structure with slope of 1 (V) : 20 (H) (one vertical is to twenty horizontal ) towards drawing face complete as per drawings and MORD technical specifications section 700 & 1200 or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including the octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and laying in position machine batched and machine mixed cement concrete work of grade M-25 (twenty five) design mix to obtain the compressive strength of 25N/mm square ( twenty five newton per square millimetre ) for reinforced cement concrete work, in all work up to plinth level using minimum cement content not less than 360 KG/Cum (Three hundred sixty kilogram per cubic metre) or as per approved design mix to give a smooth surface mechanically mixed and vibrated including curing complete and pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability for reinforced concrete work including carriage of material within all lead ,lift and other incedental as per specification approved drawing design and as per direction of Engineer-in-charge.The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government .

Providing and laying in position machine batched and machine mixed cement concrete work of grade M-25 (twenty five) design mix to obtain the compressive strenght of 25N/mm square ( twenty five newton per square millimetre ) for reinforced cement concrete work up to floor all level using minimum cement content not less than 360 KG/Cum (Three hundred sixty kilogram per cubic metre) or as per approved design mix to give a smooth surface mechanically mixed and vibrated including curing complete and pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability for reinforced concrete work including carriage of material within all lead ,lift and other incedental as per specification approved drawing design and as per direction of Engineer-in-charge.The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government .

Providing tor steel reinforcement of Tata / Sail of thermo mechanically treated bars of grade Fe-500 D(Fe- five hundred )or more for Reinforced Cement Concrete work including straightening, cutting, bending, placing in position and binding all including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, , GST and any other taxes imposed by the Government.

Random rubble masonry/polygonal rubble masonry (uncoursed / brought to courses ) with hard stones of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (one cement isto six sand isto twelve graded stone aggregate 20mm (twenty millimetre) nominal size) at plinth level in cement mortar 1:6 (one cement isto six sand) as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.The rate is including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and Filling with hard stone of approved quality under floor including watering, ramming, consolidating and dressing complete including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, , GST and any other taxes imposed by the Government.

Providing and laying Damp Proof Course 100mm (One Hundred millimetres) thick with cement concrete 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate) 12.5mm (Twelve decimal five millimetres nominal size) and curing complete, as required at site including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, , GST and any other taxes imposed by the Government.

Providing & applying a coat of residual petroleum bitumen of grade of VG-10 (Viscosity grade-Ten) of approved quality using 1.7 kg/Sqm (One point seven kilogram) per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil etcetera complete including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, , GST and any other taxes imposed by the Government.

Second class brick masonry work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (Seven point Five) in super structure in Cement mortar 1:6 (One cement isto Six coarse sand) complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Half brick masonry work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (Seven point Five) in super structure in Cement mortar 1:4 (One cement isto Four coarse sand) complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing 40 cm (forty centimetre) thick cavity wall with Second class common burnt clay building bricks with 5.5 cm (five point Five centimetre) in wide cavity and consisting 11.5 cm ( Eleven decimal five centimetre) thick innerwall in CM 1:4(one cement isto four sand) and outer wall 23 cm (twenty three centimetre) thick laid in cement mortar 1:6 ( one sand isto six sand) and strength with hoop iron and bituminious coated cross ties including making weep hole and vent pipe complete 2 Nos. (two numbers ) 6/8 ( six / eight )width brass in Z- shape crossing each other shall be provided at the interval 90-100 cm ( ninety - hundred centimetre) length horizontal and vertical in cavity wall and curing complete (The mesurement of wall faces only one side will be considered for payment), complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, , GST or any other taxes imposed by the Government

Providing 28 cm (twenty eight centimetre) thick cavity wall using Second class common burnt clay building bricks with 5cm ( Five centimetre) in wide cavity and consisting 11.5 cm ( Eleven decimal five centimetre) thick inner and outer wall 11.5 cm (eleven decimal five centimetre) laid in cemnet mortar 1:4 ( one sand isto four sand) and strength with hoop iron and bituminious coated cross ties including making weep hole and vent pipe complete 2 Nos. (two numbers ) 6/8 ( six / eight )width brass in Z- shape crossing each other shall be provided at the interval 90-100 cm ( ninety - hundred centimetre) length horizontal and vertical in cavity wall and curing complete ) The mesurement of wall faces only one side will be considered for payment) complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, , GST or any other taxes imposed by the Government

Providing and fixing coloured anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868. Minimum anodic coating of grade AC 15 ( fifteen) sub and glazed partitions frame work for door,windows and ventilators of section(No.14081) 4524 & 4526 of Jindal/Hindalco with extruded built up standard tubular sectionsr fixed with dash fastener of required dia and size (Dash fastener to be paid for separately)as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government

Providing and fixing coloured coated/ anodised aluminium work for shutters of doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of Jindal /Hindalco approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etcetera Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) complete as per architectural drawings specifications, design and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkhana, Toll tax, , GST and any other taxes imposed by the Government.

Providing and fixing fly proof stainless steel grade 304 wire gauge with 0.5mm (zero decimal five millimetre) diametre wire and 1.4mm (one decimal four millimetre) wide aperture with for aluminium door, window, ventilator shutters and partitions etcetra with EPDM rubber / neoprene gasket etcetra complete as per the architectural drawings and the directions of Engineer- In-Charge. (Cost of aluminium snap beading shall be paid in basic item) complete including entire carriage of material within all leads, lifts and other incidentals,as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, , GST and any other taxes imposed by the Government.

Providing and fixing 8mm (Eight milimetres) thick anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm (Two hundred millimetre) centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening complete including entire carriage of materials within all leads, lifts and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, , GST and any other taxes imposed by the Government.

Providing and fixing 12mm (Twelve milimetres) thick phenol bonded (both Side) prelaminated BWP grade water proof MDF partical board of(exterior grade) in matt finish flat pressed three layer conforming to IS: 12823 of Acion Tesa/Greenlam/Merinolam/Vista/Kilon approved shade Grade l Type ll, in panelling fixed in aluminium doors, window shutter and partitions frame with CPbrass/stainless screws etcetra complete (aluminium work to be paid dor seprately as per architectural drawings and directions of Engineer-in-Charge including entire carriage of materials within all leads, lifts and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, , GST and any other taxes imposed by the Government.

Providing and fixing 6 mm ( six millimetre) thickness weight not less than 15.00 kg/ sqm (fifteen kilogram per square metre) of Modiguard/Saint Gobain Glass panes in door, window, ventilator shutters and partitions etcetera with EPDM rubber / neoprene gasket etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, , GST and any other taxes imposed by the Government.

Providing and fixing to existing door frames 30mm (Thirty millimetre) thick factory made Prelaminated PVC door shutter consisting of frame made out of M.S. tubes of 19 (Nineteen) gauge thickness and size of 19x19mm (Nineteen into nineteen millimetre) for styles and 15x15mm (Fifteen into fifteen millimetre) for top & bottom rails, (Code no 9.120 ) of Rajshri M.S. frame shall have a coat of steel primers of approved make and manufacture M.S. frame covered with 5mm thick heat moulded PVC "C" channel of size 30mm (Thirty millimetre) thickness, 70mm (Seventy millimetre) width out of which 50mm (Fifty millimetre) shall be flat and 20mm (Twenty millimetre) shall be tappred in 45 (Forty five) degree angle on either side forming style and 5mm (Five millimetre) thick, 95mm (Ninety five millimetre) wide, PVC sheet out of which 75mm shall be flat and 20mm (Twenty millimetre) shall be tapered in 45o (Forty five degree) on the inner side to form top and bottom rail and 115mm (One hundred fifteen millimetre) wide PVC sheet out of which 75mm (Seventy five millmetre) shall be flat and 20mm (Twenty millimetre) shall be tapered on both side to form lock rail, top, bottom and lock rail shall be provided either side of the panel 10mm (Ten millimetre) thick, 20mm (Twenty millimetre) wide cross PVC sheet be provided as gap insert for top rail and bottom rail paneling of 5mm thick both side PVC Sheet to be fitted in the M.S. frame welded/sealed to the style & rails, joints mitred and jointed with solvent cement adhesive includingfixing of PVC shutter with existing frame with M.S. butt hinges 100x50x1.90mm (One hundred into fifty into One point nine zero millimetre) size with necessary screws etcetera complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, , GST and any other taxes imposed by the Government.

Providing and fixing Glazing with glass panes 4mm (Four milimetre) thick weight not less than 10.00Kg/M2 (Ten Kilogramme per square metre) of Modiguard / Saint Gobain for shutters with EPDM rubber/neoprene gasket etcetra complete, as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, , GST and any other taxes imposed by the Government.

Providing & Fixing complete box of cupboard of 25 mm (twenty five millimetre) thick water proof termite resistant Ply board in shutters ISI marked IS- 1659 of Uniply/Green ply/Century ply/Kit ply/Dura ply/ Marino (ISI marked) shutter and all shelves with 19 mm (nineteen millimetre) thick water proof commercial antitermite resistant ply borad including vertical portion and shelves. The back side of cupboard/cabinet work shall have 6 mm (six millimetre) thick water proof ply and all cut portion shall be finished with 6/12 mm ( six obliqe twelve milimetre) thick hard wood edging/lipping including all wood work of cupboard and the shutter from inside and out side shall be finished with 1 mm ( one millimetre) thick lamination of century/ Action tesa/Gereenlam/ Merinolam and painting in side of synthetic enamel paint of approved shade and sample etcetera complete (The measurement for payment shall be of front face only) and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality,Malkana,toll tax, GST or other taxes imposed by the Government.

Providing & Fixing cupboard shutters of 19 mm (nineteen millimetre) thick water proof commercial board of ISI marked of Uniply/Green ply/Century ply/Kit ply/ Dura ply /Marino (ISI marked) having inside and out side shall be finished with 1 mm ( one millimetre) thick lamination of century/ Action tesa/Gereenlam/ Merinolam and painting in side of synthetic enamel paint of approved shade and sample etcetera complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality,Malkana,toll tax, GST or other taxes imposed by the Government.

Providing and fixing everest fiber cement board ceiling 600 x 600 x 6 mm (six hundred into six hundred into six millimetre) including prepainted GI channel @ 600 mm C/C (at the rate of six hundred millimetre centre to centre) as per detail design, drawing and specification and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality,Malkana,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 100mm ( one hundred millimetre) brass mortice latch & locks with 6 (six) livers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etcetra complete. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 300x16mm (Three hundred into Sixteen millimetres) nominal size aluminium sliding door bolts ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with nuts and screws etcetera complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 250x16mm (Two hundred fifty millimetres) nominal size aluminium sliding door bolts ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with nuts and screws etcetera complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 250x10mm (two hundred fifty into Ten millimetres) nominal size aluminiumTower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with nuts and screws etcetera. complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, , GST and any other taxes imposed by the Government.

Providing and fixing 150x10mm (one hundred fifty into Ten millimetres) nominal size aluminium Tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with nuts and screws etcetera. complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, , GST and any other taxes imposed by the Government.

Providing and fixing brass 100x10mm (one hundred into Ten millimetres) nominal size Tower bolts, ISI marked,with nuts and screws etcetera complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, , GST and any other taxes imposed by the Government.

Providing and fixing 75 mm (Seventy five millimetre) bright finished brass handles with necessary screws etcetera complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing magnetic catcher for cup board shutter with necessary screws etcetra complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, , GST and any other taxes imposed by the Government.

Providing and fixing 150 mm ( one hundred fifty millimetre) ISI marked oxidised M.S. single acting spring hinges with necessary screws etcetera complete as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, , GST and any other taxes imposed by the Government.

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etcetera including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete including fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etcetera of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etcetera )including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, , GST and any other taxes imposed by the Government.

Providing and laying 18 mm (eighteen millimetre) thick cheema pink Granite stone flooring with combination of black granite and Lakha red in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings over 20 mm ( twenty millimetre) (average) thick base of cement mortar 1:4 (one cement isto four coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing ,curing and polishing etcetera all complete including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, , GST and any other taxes imposed by the Government.

Providing and laying 19 mm( nineteen millimetre) thick Cheema pink granite single slab with double round nosing/edging stone flooring in required design and patterns, in stair case etcetera all complete as per the architectural drawings with over 20 mm ( twenty millimetre) (average) thick base of cement mortar 1:4 (one cement isto four coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etcetera all complete including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, , GST and any other taxes imposed by the Government.

Providing and laying anti skid full body Vitrified tiles of size 600 x 600 mm/600 x1200 mm ( six hundred into six hundred millimetre oblique six hundred into twelve hundred millimetre) of Restile/Rak/Simpolo/ Kajaria/ AGL/Johnson /Orient&Bell/Somany/Nitco of approved shade and design, in flooring etcetera laid on a bed of 20mm (twenty millimetre) thick cement mortar 1:4 (One cement isto four sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing and laying full body Vitrified tiles of size 600 x 600 mm/600 x1200 mm ( six hundred into six hundred millimetre oblique six hundred into twelve hundred millimetre) of Restile/Rak/ Simpolo/Kajaria/AGL/ Johnson/Orient & Bell/ Somany/ Nitco of approved shade and design, in flooring etcetera laid on a bed of 20mm (twenty millimetre) thick cement mortar 1:4 (One cement isto four sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing and laying Matt finish Vitrified tiles of size 600 x 600 ( six hundred into six hundred millimetre) of Restile/ Rak/ Simpolo/ Kajaria/AGL/ Johnson/Orient&Bell/Somany/Nitco of approved shade and design, in flooring etcetera laid on a bed of 20mm (twenty millimetre) thick cement mortar 1:4 (One cement isto four sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing and laying Terrace floor tiles of size 300x300 mm /400x400 ( Three hundred into three hundred millimetre oblique four hundred into four hundred millimetre ) (thickness to be specified by the manufacturer), of Restile/Rak/Simpolo/Kajaria/AGL/Johnson/Orient&Bell/Somany/Nitco as per approved shade laid on 20 mm ( twenty millimetre) thick bed of cement mortar 1:4 ( one Cement isto four Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm ( three point three kilogram per square metre) including pointing the joints with white cement and matching pigments etcetra, complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing & laying 300 x 300 x 25 mm ( three hundred into three hundred into twenty five millimetre) labrador design (Rainbow series) of NTC/Unistone/Atlantic in ramp over 20 mm ( twenty millimetre) (average) thick base of cement mortar 1:5 ( one cement isto five coarse sand) with joints 3 mm ( three millimetre) thick, side buttered with cement mortar 1:2 (one cement is to two stone dust) admixed with pigment to match the shade of stone and pointing with same mortar complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and laying antiskid Ceramic glazed floor tiles of size 300x300 mm ( Three hundred into three hundred millimetre) (thickness to be specified by the manufacturer), of premium quality of Restile/Rak/Simpolo/Kajaria/ AGL/Johnson/Orient&Bell/Somany/Nitco as per approved shade laid on 20 mm ( twenty millimetre) thick bed of cement mortar 1:4 ( one Cement isto four Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm ( three point three kilogram per square metre) including pointing the joints with white cement and matching pigments etcetra, complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and laying ceramic glazed tiles of Restile/Rak/Simpolo/Kajaria/AGL/ Johnson/ Orient&Bell/Somany/Nitco in skirting, risers of steps and dados of size 300 x 450 mm ( three hundred into four hundred fifty millimetre) conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in cladding over 12 mm (twelve millimetre) thick bed of cement Mortar 1:3 (One cement isto three coarse sand) and jointing with grey cement slurry @ 3.3kg/Sqm (Three point three kilogram per square metre) including pointing in white cement mixed with pigment of matching shade complete including carriage of materials and all leads lifts and other incidentials.The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 12mm (Twelve millimetre) thick Unistone /NTC/Atlantic stone cladding on Reinforced Cement Concrete / brick wall surface side as on faces of Arch masonry walls etcetera on 12mm (Twleve millimetre) thick cement plaster 1:3 (One cement isto Three sand) and jointed with cement slurry including scaffolding upto floor all level complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete interlocking block 80mm ( eighty millimetre) thick (M40) Made with vibration technology PVC / Fibre moulds per polished of NTC/ Unistone / Atlantic ISI marked IS No 15659 as per approved shade & sample including border or kurb block grey or coloured 50 mm ( fifty millimetre) thick average thickness bed of course sand , filling the joints with fine sand etcetra complete complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing water proofing treatment shall be done in two coats apply First coat of Dr. Fixit Torch SHIELD (P-3160-3mm) to the clean and saturated surface maintaining a coverage 0.60 sqm (Zero point six zero squate meter) per kilogram to achieve 1mm (one millimeter) thickness this coating shall also be executed upto 300mm (Three hundred millimetre) vertically. The second coat shall be applied in opposite direction after 4 to 6 (Four to six) hours of application of 1st coat then sprinkle sand on top surface of applied Dr. Fixit Fast flex white still tacky and the second coat. Then apply cement mortar 1:4 (one cement ist four sand) and mixed with Pidiproof LW at the rate 200ml (two hundred millilitre) per 50 (Fifty kilogram) of cement over the floor with suitable gradient towords drain water pipe while the second coat of Dr. Fixit is still tacky complete as per drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 0.60 mm (zero point six zero millimetre ) thick prepainted steel sheel sheet of TATA Durashine /Sail/ Reliance /Jindal steels in roofing over steel trusses with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 (twenty ) micron over 5 (five ) micron primer coating and back coat of polyster 5(five) micron or 5 (five )micron primer coating including fixing with prepainted iron J & L hooks , bolt and nuts 6 mm (six millimetre) diametre with prepainted limpet washers complete with in all accessories as required including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing factory made ridges or hips having proper gola shape 60 cm (Sixty centimetres) overall with 0.60 mm (Zero point sixty millimetres) thick prepainted steel sheets of Tata / Sail /Reliance / Jindal steels in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 (Twenty) microns over 5 (five) microns primer coating + back coat of polyster of 5 (five) microns over 5 (five) microns primer coating fixing with prepainted iron J or L hooks, bolts & nuts 6 mm (Six millimetres) diametre and prepainted G.I. limpet and bitumen washers complete including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing valley 90cm (Ninety centimetres) overall 0.60mm (Zero point sixty millimetres) thick prepainted steel sheet of Tata Durashine / Sail /Reliance / Jindals steels in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 (five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six millimetres) dia with prepainted G.I. limpet and bitumen washers complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, , GST and any other taxes imposed by the Government.

Providing and fixing flashing 38cm ( thirty eight centimetre) overall with 0.60mm ( point six zero milimetre) thick prepainted sheet of Tata Durashine/Sail/Reliance/Jindal steels in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 microns ( twenty microns) over 5 (five) microns primer coating + back coat of polyster of 5 (five) microns over 5 ( five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia meter & prepainted G.I. limpet & bitumen washers complete with all accessories as per specification, approved drawings, design as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing minimum 30cm (Thirty centimeters) wide 30cm (Thirty centimeters) deep of 0.63mm (Zero decimal six three milimetres) thick plain G.I. sheet gutter of TATA/ Sail/Reliance / Jindal with iron brackets 40x3mm (Forty into Three milimetre) size dome shape grating shall be provided which shall be M.S. plate 25x5/ 6mm (Twenty five into five/six millimetre) square round shape with 6mm (Six millimetres) diametre bars in dome including bolts and nuts and washers and including making necessary connections with rain water pipe complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 110 mm (One hundred ten millimetre) diametre on wall face unplasticised Rigid PVC (D-Plast) rain water pipes single socketed conforming to IS : 13592 Type A ISI marked of Finolex/Relpipe (Reliance)/ Vectus working pressure not less than 4/6 kg/cm2 (Four/Six kilogram per centimetre sqaure), including jointing with seal ring conforming to IS : 5382 including jointing with seal ring leaving 10mm (Ten millimetre) gap for thermal expansion including filling the joints with approved adhesive complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 110mm (One hundred fifty millimetre) Plain Bend on wall face PVC acessories for rain water pipes working pressure 4/6 kg/cm2 (Four/Six kilogram per centimetre sqaure) ISI marked of Finolex/Relpipe (Reliance)/ Vectus including priming coat, painting and welding etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 110 mm ( one hundred ten millimetre) dia unplasticised -PVC pipe clips of approved design to unplasticised PVC rain water pipes ISI marked of Finolex/Relpipe (Reliance)/ Vectus by means of 50x50x50 mm ( fifty into fifty into fifty millimetre) hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (one cement isto four coarse sand) and making good the wall etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing M.S. B.P. sheet 2.0mm (Two point zero millimetre) thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured and paid separately) including fixing complete as per architectural drawings including carriage of material, within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including of octroi, royality, malkana, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing M.S. B.P. sheet 2.0mm (Two point zero millimetre) thick in eaves board/facia/soffits/ceiling with 19x19 mm (ninety into ninety millimetre) hollow pipe @15 cm (at the rate of fifteen centimetre centre to centre) including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge including fixing complete as per architectural drawings including carriage of material, within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including of octroi, royality, malkana, Toll tax, GST and any other taxes imposed by the Government.

Structural steel work of Tata / Sail riveted, bolted or welded in built up sections in trusses and framed work trussed purlins in building including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer complete in all respect as per architectural drawing including carriage of material within all leads, lifts as per specification as per the direction of the Engineer-in-charge and other incidentals. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Structural steel work of Tata / Sail riveted, bolted or welded in built up sections, gratings, frames, guard bar, ladder, railings, brackets, gates and similar works, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, , GST and any other taxes imposed by the Government.

Providing 6mm (Six millimetre) thick cement plaster to ceiling in cement mortar 1:3 (One cement isto Three sand) upto all floor levels complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing 15mm (Fifteen millimetre) thick cement plasters in single coat on rough side of brick/concrete/stone walls for interior plastering up to 10 (ten) metre height including making groove or drip course, arises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty millimetres) in girth and finished even and smooth with cement mortar 1:6 (One cement isto six sand) complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, , GST and any other taxes imposed by the Government.

Providing 15mm (Fifteen millimetre) thick cement plasters in single coat on rough side of brick/concrete/stone walls for interior plastering above 10 (ten) metre height including making groove or drip course, arises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty millimetres) in girth and finished even and smooth with cement mortar 1:6 (One cement isto six sand) complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, , GST and any other taxes imposed by the Government.

Providing 20mm (twenty millimetre) thick cement plaster with grooves in single coat on fair side of brick/concrete/stone walls for exterior plastering including making groove or drip course, arises, internal rounded angles, chamfers or rounded angles not exceeding 80mm (Eighty millimetres) in girth and finished even and smooth with cement mortar 1:5 (One cement isto five sand) above plinth level to floor all levels complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing 15mm (Fifteen millimetre) thick cement plasters in single coat on fair side of brick/concrete/stone walls for interior plastering up to 10(ten) metre height including making groove or drip course, arises, internal rounded angles, chamfers or rounded angles not exceeding 80mm (Eighty millimetres) in girth and finished even and smooth with cement mortar 1:6 (One cement isto six sand) complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing 15mm (Fifteen millimetre) thick cement plasters in single coat on fair side of brick/concrete/stone walls for interior plastering above 10(ten) metre height including making groove or drip course, arises, internal rounded angles, chamfers or rounded angles not exceeding 80mm (Eighty millimetres) in girth and finished even and smooth with cement mortar 1:6 (One cement isto six sand) complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

15mm (fifteen millimetre) thick cement plaster in single coat on fair side of brick / concrete / stone walls for interior plastering upto floor all levels including arises, internal rounded angles, chamfers and / or rounded angles not exceeding 80mm (eighty millimetre) in girth and finished even and smooth with cement mortar 1:3 (one cement isto three sand)as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

15mm (fifteen millimetre) thick cement plaster in single coat on fair side of brick / concrete / stone walls for interior plastering upto floor all levels including arises, internal rounded angles, chamfers and / or rounded angles not exceeding 80mm (eighty millimetre) in girth and finished even and smooth with cement mortar 1:5 (one cement isto five sand)as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Applying Birla / J.K. white wall care putty over plaster surface after thoroughly brushing the surface free from mortar dropings, dust, loose material and other foreign matters, sand papered smooth to give final matt finish to the surface upto floor all level complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Applying priming coat on new wood and wood based surface with enamel paint of Asian paints/Nerolac paints/ Burger paints/Dulux paints give an even shade including cleaning the surface of dirt, dust and other foreign matter, sand papering & stopping including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including of octroi, royality, malkana, Toll tax, GST and any other taxes imposed by the Government.

Painting two or more coats (including priming coat) on new steel and other metal surfaces with enamel paint of Asian paints/Nerolac paints/ Burger paints/Dulux paints of approved shade brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax or any taxes GST imposed by the Government.

Wall painting (two or more coats) with acrylic washable emulsion of Asian paints/Nerolac paints/ Burger paints/Dulux paints of approved shade for interior painting with brushes plain smooth finish composed of acrylic polymere in emulsion inorganic,/special pigment siliceous aggregate anti fungicides anti-rusting & foaming in two coat including necessary putty to give smooth even surface, sand papered smooth complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Finishing walls with (two or more coats) with premium emulsion of Asian paints/Nerolac paints/ Burger paints/Dulux paints of approved shade for interior painting with brushes plain smooth finish composed of acrylic polymere in emulsion inorganic,/special pigment siliceous aggregate anti fungicides anti-rusting & foaming in two coat including necessary putty to give smooth even surface, sand papered smooth complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing and applying fineDune/Dune finish of NCL Alltek /Spectrum textured wall finish natural grit of Heritage having coating thickness of 1.50 mm (one point fifty millimetre) with one coat of Birla white/JK wall care putty of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing plinth protection with 60 mm ( sixty millimetre) thick interlocking paver block of NTC / unistone /Atlantic with 23 cm ( twenty three centimetre) diametre half rounded RCC pipe for drainage purpose fixed over 10 cm ( ten cenetimetre) thick cement concrete 1:4:8 ( one cement isto to four course sand and eight isto stone aggregate) bedding and haunching of pipe as per architectural drawing, design and specifications complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 1216 (20 mm OD pipe) (Twenty millimetre outer diametre) Polyethelene-Aluminium-Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 1545 ,2004 of Kitec U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all specialfittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etcetra , with clamps at 1.00 (one) metre spacing. This includes testing of joints complete for consealed work , including cutting chases and making good the wall etcetra as per direction of the Engineer-incharge including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 20mm (twenty millimetre) nominal bore G.I. pipe complete with G.I. fitting including trenching and refilling etcetera complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing 20mm (twenty millimetre) nominal bore G.I. pipe complete with G.I. fitting and clamps including cutting and making good the walls etcetera complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing 15mm ( fifteen millimetre) nominal bore ball valve (brass) of approved quality High or low pressure with plastic floats complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and fixing PVC connection pipe ISI marked 45cm (forty five centimeters) long and 15mm (fifteen millimeters) nominal bore with brass unions complete including carriage of material with in all leads, lifts and other incidentals . The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimeters) diameters C.P. brass bib tap of continental series of Jaquar/countess plus series of Hindware/Ocean series of Cera /vintage series of Kerovite/Hindon series of Jal and french collection / signature series of Somany ISI marked of approved quality (superior or heavy type) and colour of prayag polynets syonet complete including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimeter) dia CP brass stop cock (concealed) of heavy duty) of continental series of Jaquar/countess plus series of Hindware/Ocean series of Cera /vintage series of Kerovite/Hindon series of Jal and french collection / signature series of Somany complete including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millmeters) C.P. brass angle valve of continental series of Jaquar/countess plus series of Hindware/Ocean series of Cera /vintage series of Kerovite/Hindon series of Jal and french collection / signature series of Somany without nuts and pipe including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimeters) nominal bore brass full way valve with wheel complete of continental series of Jaquar/countess plus series of Hindware/Ocean series of Cera /vintage series of Kerovite/Hindon series of Jal and french collection / signature series of Somany including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing water closet squatting pan (Indian type W.C. pan )White Vitreous china Orissa pattern W.C. pan no 20090 of size 53 x 41cm (fifty three into forty one centimetre )with integral type foot rests with 100 mm (one hundred millimetre) sand cast Iron P or S trap, 10 (ten ) litre low level P.V.C. flushing cistern,of Cera/Hindware/Jaquar of snow white/star white shade and as shown in the drawing / as per details including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required complete carriage of material with in all leads, lifts and other incidentals . The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing vitreous China wash down water closet (European type W.C. pan) Universal Pan of Star S No. 20087 (S-10) (ten) of size 57 x 35x 39 Cm (fifty seven into thirty five into thirty nine centimetre )with 10 (ten) litre low level PVC flushing cistern (Sleek plus) having dual flush system of Cera/Hindware/Jaquar of snow white/star white shade with th fitting and brackets, 40 mm(forty millimetre ) flush bend, 20 mm (twenty milimetre )over flow pipe, with seat & lid fixed with C.P. brass hinges and rubber buffers, with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and and fixed with jet pressure and intergal P or S trap including jointing the trap and soil pipe with adhesive of approved brand complete as per directions of Engineer-in Charge including carriage of material with in all leads, lifts and other incidentals . The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing floor mounted, white vitreous china WC Pan -edge cat No. 92562 one piece closet of size 63.5 x37.5 x 75.5 cm ( sixty three point five into thirty seven point five into seventy five point five centimetre) in white shade of Hindware/Perryware/Essco by Jaquar/Cera including integrated white vitreous china cistern of capacity 10 (ten) litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etcetra including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in Charge including carriage of material with in all leads, lifts and other incidentals . The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing White vitreous China wash basin Neptune No. 10072 No. of size 55x 48x86 cm ( fifty five into forty eight into eighty six) with pillar tap with out pedestal of Hindware/Cera/Jaquar of star white /snow white shade with a single hole with CI bracket including 15mm ( fifteen millimetre) diametre CP brass pillar tap, 32mm ( thirty two millimetre) CP brass waste of heavy duty make of ISI standard pattern fitting including painting of fitting and brackets, cutting and making good the walls wherever required complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing Stainless Steel round type wash basin of size 405x355 mm ( four hundred five into three hundred fifty five millimetre) with C.I. brackets including 15 mm (fifteen millimetre) diametre C.P. brass pillar taps, 32 mm (thirty two millimetre) C.P. brass waste of standard pattern, including painting of fitting, sand brackets, cutting and making good the walls wherever required complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing Hindware/Cera/Jaquar of star white /snow white shade white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 57x45x22 cm ( fifty seven into forty five into twenty two centimetre) stainless steel kitchen sink of AMC/Unik/Diamond approved standard ISI make with drain board and C.P. waste with C.I. or M.S. Brackets painted white including cutting holes and making good the same but excluding fitting complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 8 mm (eight millimetre diametre ) dia C.P. / S.S. Jet of continental series of Jaquar/countess plus series of Hindware/Ocean series of Cera /vintage series of Kerovite/Hindon series of Jal and french collection / signature series of Somany with flexible tube upto 1 (one) metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing white vitreous china flat back half stall urinal Large flat back no 60002 of size 39x 37.5x59 ( thirty nine into thirty seven point five into fifty nine centimetre) with white PVC automatic flushing cistern of Cera /Hindware/Jaquar of snow white/star white shade and as shown in the drawing / as per details with fittings, standard size C.P. brass flushpipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I.trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cuttingand making good the walls and floors wherever required :Range of two half stall urinals with 10 litre (ten litre) P.V.C. automatic flushing cistern complete as per the direction of Engineer -in-Charge including carriage of material with in all leads, lifts and other incidentals . The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 32mm (thirty two millimeters) nominal diameters C.P brass waste of continental series of Jaquar/countess plus series of Hindware/Ocean series of Cera /vintage series of Kerovite/Hindon series of Jal and french collection / signature series of Somany for wash basin or sink complete including carriage of material with in all leads, lifts and other incidentals . The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government. .

Providing and fixing 600x450mm (Six hundred into four hundred fifty millimeters) bevelled edge mirror of continental series of Jaquar/countess plus series of Hindware/Ocean series of Cera/vintage series of Kerovite/Hindon series of Jal and french collection / signature series of Somany of superior glass mounted on 6mm (Six millimeters) thick A.C. sheet or plywood sheet and fixed to wooden plugs with C.P. brass screws and washers complete including carriage of material with in all leads, lifts and other incidentals . The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government. .

Providing and fixing C.P. brass shower rose with 15 (fifteen) or 20 mm (twenty millimetre) inlet of continental series of Jaquar/countess plus series of Hindware/Ocean series of Cera/vintage series of Kerovite/Hindon series of Jal and french collection / signature series of Somany as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government. .

Providing and fixing C.P. brass towel rail 600X20 mm (six hundred into twenty millimetre )of continental series of Jaquar/countess plus series of Hindware/Ocean series of Cera/vintage series of Kerovite/Hindon series of Jal and french collection / signature series of Somany complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour complete including carriage of material with in all leads, lifts and other incidentals . The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing CP brass towel ring trapezoidal shape 215 mm (two hundred fifteen millimetre ) long, 200 mm( two hundred millimtre)wide of continental series of Jaquar/countess plus series of Hindware/Ocean series of Cera/vintage series of Kerovite/Hindon series of Jal and french collection / signature series of Somany with minimum distances of 37 mm ( thirty seven) from wall face with concealed fittings arrangement of approved quality complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government. .

Providing and fixing 150mm ( one hundred fifty millimetre) diametre rigid high pressure PVC spigot and socketed soil waste and ventilating pipes of Finolex/ Relpipe(Reliance /Vectus conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 110mm ( one hundred ten millimetre) diametre rigid high pressure PVC spigot and socketed soil waste and ventilating pipes of Finolex/ Relpipe(Reliance /Vectus conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 75 mm ( seventy five millimetre) diametre rigid high pressure PVC spigot and socketed soil waste and ventilating pipes of Finolex/ Relpipe(Reliance /Vectus conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 150mm ( one hundred sixty millimetre ) nominal bore/diameters P.V.C. plain bend of Finolex/ Relpipe(Reliance /Vectus Confirming to IS No.-14735-99 including filling the joints with approved adhesive etcetra complete carriage of material with in all leads, lifts and other incidentals . The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 110mm ( one hundred ten millimetre ) nominal bore/diameters P.V.C. plain bend of Finolex/ Relpipe(Reliance /Vectus Confirming to IS No.-14735-99 including filling the joints with approved adhesive etcetra complete carriage of material with in all leads, lifts and other incidentals . The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 75mm (Seventy millimetre ) nominal bore/diameters P.V.C. plain bend of Finolex/ Relpipe(Reliance /Vectus Confirming to IS No.-14735-99 including filling the joints with approved adhesive etc complete carriage of material with in all leads, lifts and other incidentals . The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 150mm (one hundred sixty millimeter ) diametre P.V.C single equal branch with oval access door, of Finolex / Relpipe (Relience) / Vectus insertion rubber washer 3mm (three millimeter) thick bolts and nuts ISI marked including finishing with approved adhesive including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 75mm ( Seventy five millimeter ) diametre P.V.C single equal branch with oval access door, of Finolex / Relpipe (Relience) / Vectus insertion rubber washer 3mm (three millimeter) thick bolts and nuts ISI marked including finishing with approved adhesive including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 110x90mm (One hundred ten millimeter into ninety milimeter) ISI marked P.V.C floor trap of Finolex / Relpipe (Relience) / Vectus of self cleaning design complete including fixing with approved adhesive cost of cutting and making good the walls and floors etc.complete carriage of material with in all leads, lifts and other incidentals . The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 100mm (One hundred millimetre) dia chromium plated grating of continental series of Jaquar/countess plus series of Hindware/Ocean series of Cera /vintage series of Kerovite/Hindon series of Jal and french collection / signature series of Somany superior quality for floor, gully or nahani trap complete including carriage of material with in all leads, lifts and other incidentals . The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government. .

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (one cement isto four coarse sand) C.I. cover with frame (light duty) 455x610 mm (four hundred fifty five into six hundred ten )internal dimensions, total weight of cover with frame to be not less than 38 kg(thirty eight ) (weight of cover 23 kg(twenty three kilogram) and weight of frame 15 kg (fifteen kilogram), R.C.C. top slab with 1:1.5:3 mix (one cement isto one decimal five Fine sand isto three graded stone aggregate 20 mm (twenty millimetre ) nominal size), foundation concrete 1:5:10 (one cement isto five fine sand isto ten graded stone aggregate 40 mm (forty millimetre) nominal size), inside plastering 12 mm (twenty millimetre )thick with cement mortar 1:3 (one cement isto three coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etcetra. complete as per standard design Inside dimensions 455x610 mm(four hundred ffifty five into six hundred ten ) and 45 cm (forty five centimetre )deep for single pipe line : 19.30.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5( seven point five ) including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank 1000 (one thousand litre ) capacity of Finolex /Relpipe (Relience) / Vectus having tripple layer IS : 12701 marked,with cover and suitable locking arrangement and making necessary holes for inlet, outlet andoverflow pipes but without fittings and the base support for tank complete including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing of water lifting pump of 2.00 HP (two point zero horse power) of Kirloskar/Crompton including all necessary fittings complete in all respect including entire carriage of materials within all leads lifts and other incidentals, and as per specification and as per directed by the Engineer-Incharge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.