85806SPECIAL REPAIRS TO BITUMIN ROAD AT LIVING AREA OF 641 EME BN, INTERNAL ROAD OF RECEIVER STATION (WR) OF SOUTHERN COMMAND SIGNAL REGT AND ROAD OF EME WORK SHOP UNDER GE (SOUTH) PUNE.

Amount

M&L for repairs to pot holes exceeding 30 mm depth and not exceeding 1.00 sqm each including sweeping free from dust and mud or water, scouring sunken surfaces in roads, paths etc., cutting around edges to at least 25 mm in depth, making good by applying a tack coat with bitumen primer(VG-10) @ 5 Kg per 10 Sqm, putting in premixed bitumenous semidense concrete (design mix), 25 mm thick (consolidated thickness) with 5.5 % paving bitumen of grade VG-30, binder content by weight of total mix, laid with mechanical paver, rolled & compacted in required gradient and camber with 8 to 12 ton power roller complete all as specified and as directed

All as per item No 01 here- in- above but excluding premixed sand seal coat complete all as specified and as directed.

Scarifying and picking gravelled macadam or bituminous macadam surfaces in area not exceeding 400 Sqm and in exc 50 mm and n exc 100 mm in depth and removing the same to a distance n exc 50m and staking complete all as specified and as directed.

M&L for Water Bound Macadam (WBM) 75 mm (consolidated thickness) with coarse aggregate of grading (63 to 40 mm size) spread, rolled and consolidated to gradient and camber required with granite trap or basalt type aggregate 8 to 12 ton power roller complete all as specified and as directed.

All as per item No 04 here- in- above but except material complete all as specified and as directed.

M&L for Water Bound Macadam (WBM) 150 mm (consolidated thickness) in two layer of 75 mm thick with coarse aggregate of grading 2 (63 to 40 mm size) spread, rolled and consolidated to gradient and camber required with granite trap or basalt type aggregate 8 to 12 ton power roller complete all as specified and as directed.

All as per item No 06 here- in- above but except material complete all as specified and as directed.

M&L for 75 mm or less thick (Compacted thickness) average, Premixed bituminous macadam with paving bitumen of grade VG-30 @ 4 % by total mix weight, laid/ rolled and compacted to required gradient and camber complete all as specified and as directed.

M&L for preparing of unsurfaced water bound macadam /scarifying surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. and applying evenly a priming / tack coat using paving bituminous primer VG-30 at 10 kg per 10 Sqm and providing bituminous premix asphaltic semi-dense concrete using paving bitumen (VG-30 grade) , 40 mm thick (consolidated thickness) using binder content @ 5.5% by weight of total mix (Job mix) using mechanical paver rolled with 8 to 12 tonne power roller and compacted to required camber and gradient to an uniform smooth surfaces complete all as specified and directed.(Note : Quantity of bitumen shall be provided as per design mix approved by GE.)

M&L for Preparing existing black top surfaces of road with wire brushing for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny Bags to remove all loose dirt etc applying evenly a priming tack coat with bitumen primer of bitumen grade VG-10 @ 5.0 kg per 10 sqm and providing and laying bituminous premixed semi-dense asphaltic concrete 30 mm thick (consolidated thickness) with 5.5 % paving bitumen of grade VG-30, binder content by weight of total mix, rolled and compacted to required gradieent & camber using 8 to 12 tonne power roller complete all as specified and directed. Note :- Contractor shall submit the authenticated weigh batch receipt as per load material in site duly marked vehicle No

M&L for Preparing WBM surfaces of road with wire brushing for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny Bags to remove all loose dirt etc applying evenly a priming tack coat with bitumen primer of bitumen grade VG-10 @ 5.0 kg per 10 sqm and providing and laying bituminous premixed semi-dense asphaltic concrete 30 mm thick (consolidated thickness) with 5.5 % paving bitumen of grade VG-30, binder content by weight of total mix, rolled and compacted to required gradient & camber using 8 to 12 tonne power roller complete all as specified and as directed. Note :- Contractor shall submit the authenticated weigh batch receipt as per load material in site duly marked vehicle No

M&L for Preparing existing black top surfaces of road with wire brushing for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny Bags to remove all loose dirt etc applying evenly a priming tack coat with bitumen primer of bitumen grade VG-10 @ 5.0 kg per 10 sqm and providing and laying bituminous premixed semi-dense asphaltic concrete 40 mm thick (consolidated thickness) with 5.5 % paving bitumen of grade VG-30, binder content by weight of total mix, rolled and compacted to required gradient & camber using 8 to 12 tonne power roller complete all as specified and directed. Note :- Contractor shall submit the authenticated weigh batch receipt as per load material in site duly marked vehicle No

S&F in repairs providing precast kerb stone,using PCC type B0 (1:2:4) (12.5 mm graded stone aggregate ) factory made size 450 mm x 300 mm x150 mm thick set in CM (1:3) complete including necessary excavation ,tamping ground and removal of surplus soil to a distance not exceeding 50 m complete all as specified and as directed.

M&L for moorum or red bajri (spread thickness 75 mm thick) spread, rolled, watered and consolidated to gradient and camber required as in side berms complete all as specified and as directed.

S&F in repair, plastic Glass Beads Reflectors Cat Eyes made of body materials ABC plastic size 117 mm x 117 mm x 23 mm reflector 19 or 20 BI glass elements on each side with compressive strength upto 35 tonnes, yellow colour body with reflector fixing by epoxy complete all as specified and as directed.

M&L for preparation of black top surfaces of road and applying 2.5 mm thick retro-reflective thermoplastic road marking paint, as lines, dashes, arrows, letters etc on roads, pavements and the like exc 10 cm width, by mechanical machine, white or golden yellow complete all as specified and as directed.

MOHANLAL MATHRANI CONS. PVT. LTD.

Sunshine Ventures

SUBHADRA ENGINEERING AND FABRICATOR