SPECIAL REPAIR TO PORTA CABIN NO. T-18/1 (PC), T-18/2 (PC) AND T-18/3(PC) AT AF STATION UNDER GE BRICHGUNJ

Amount

Dismantling for corrugated steel sheeting, any gauge, thickness,including Removing L-type or J-type bolts in Roof Covering.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Taking down chowkats with shutters not exceeding 1.5 Sqm each (without taking off shutters from the frames) complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing the rubbish off the premises complete all as specified and directed.

Demolition of PCC Block walling built in CM 1:6 complete all as specified and directed.

Dismantling of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets Including frame of any description and any thickness, fixed in any position .

S&F steel work in tubular for columns,roof truss,purlins,rafters and battens etc incl special shaped washer etc complete using ERW or induction but welded tube conforming to IS : 1161-1979 Gde St-240 completely providing in any curvature and as of any shape etc complete all as specified and as directed.

M&L for Plates (Plain or Chequered) channels, square or notched (Ordinary and counter sunk) forming holes, without any attachment of Fe 290 (Gde E-165) completely all as specified and as directed by Engineer in Charge.

M&L precast cement concrete block masonry with PCC solid blocks in 1:3:6 type C1 using 20mm graded stone aggregates, exc. 10cm in width and set in CM 1:4 complete all as specified and directed.

M&L for Rendering 10mm thick in cement mortar 1: 6 on faces of brick work or concrete surfaces, finished fair, even and smooth without using extra cement complete all as specified and directed.

M&L 25mm thk PCC 1:2:4 type B-0 using 12.5 mm graded agg as in flooring finished fair and even without using extra cement complete all as specified and directed.

M&L for 75mm thick Cement concrete in C1 type (1:3:6) using 20mm graded stone aggregate as in plinth protection and finished even and smooth with using extra cement.

M&L non skid ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm and not exceeding 0.38 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles over 15mm thick screed bed in CM 1:4 complete all as specified and directed.

All as per item No 15.0 above but on vertical surfaces incl 10mm thick CM 1:3 as in baking coat of dado/skirting complete all as specified and directed

S & F Aluminium anodised (minimum anodisation is 15 microns) Door / window / Ventilator/partition frames and shutters (02 Nos glazed & gauzed), side hung type, without sash bars, standard aluminium grills, necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handles, locking arrangement etc, complete with standard aluminium sections, complete all as specified and as directed. (Aluminium section shall be of make Jindal/Hindalco/ Indalco). (Note:- Weight of various Aluminium sections shall only be considered for measurement for payment. However cost of rubber packing given in the item shall be deemed to be included in the rate quoted. Glass panels, prelaminated particle boards, aluminium wire cloth as applicable will be measured and paid separately as supplied only).

Supply only 4.0mm thick Sheet glass ordinary quality and glazing with oil putty in Square n.exc 0.5sqm in each pane complete all as specified and as directed.

Supply only 4.0mm thick Sheet glass ordinary quality and glazing with oil putty in Square exc 0.5sqm in each pane complete all as specified and as directed.

Supply only 12 mm thick pre-laminated particle board, exterior grade, pre-laminated on both side with decorative choice lamination fixed with aluminium beeding as in door panel complete all as specified and as directed.

S&F aluminium fly proof mesh 0.45mm nominal dia of wire and average width of aperture 1.4mm and fiexed with aluminium straps complete incl taking down.

S&F Aluminium Die cast Body Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed

S&F Butt hinges, 100mm length extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type B-21, complete all as specified and directed.

S&F Aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) 300 mm long and fixing clips of sheet cast or extruded sections and fixing bolt or cast aluminium alloy& fixed complete all as specified and directed.

S&F Aluminium anodised barrel tower bolt of extruded section of size 150mm long complete all as specified and directed.

S&F 150mm long extruded aluminium alloy anodised handles fabricated type, anodised complete all as specified and directed.

M&L for oil bound distempering two coats including complete removal of old decorated, plastered or unplastered surfaces of wall complete all as specified and directed.

M& L for two coat of whether proof exterior acrylic emulsion paint with anti fungal property over a coat of primer including complete removal of old/ new decorated, plastered or unplastered surfaces of wall complete all as specified and directed.

M&L for preparation of new steel surface exc 10cm width or girth and applying one coat of red oxide primer and two coat of synthetic enamel paint glossy complete all as specified and directed.

Preparation of old painted steel surfaces of any description over 10 cm width or girth and applying Two coat of synthetic enamel paint complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated/semicorrugated sheet 0.50mm thick as per approved profile, coloured, having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in ridges to wall, fixed with self tapping screws complete all as specified and directed.

Material and labour for false ceiling with aluminum grid work (Size of grid 600x600 mm) with 35 x 25 x 1.5 mm main tee and 25 x 25 x 1.4 mm cross tee and wall angle and suspended with 2mm dia GI wire hooked to roof with needful adjustement bolts at an interval of 1.20 m centre to centre staggered and board with Eco board decorative type size 600 x 600 x 4 mm thick finished with two coats of oil bound distemper over a coat of primer on exposed surfaces complete all as specified and directed.

M&L for providing 100mm thick cement concrete 1:4:8 type D2 using 40mm graded stonne aggregate as in sub base of flooring complete all as specified and directed.

M & L Chequered cement concrete tiles, with grey cement and pigment 30cm x30cm x20mm thick set, jointed and pointed in neat cement slurrry in floors including 15mm thick screed bed in Cm 1:4 complete all as specified and directed.

Material and labour Point wiring complete with FRLS stranded copper conductor 1.5 Sqmm (nominal area) PVC insulated unsheathed cable up to 1100 V grade conforming to IS - 694 multistranded drawn through and including rigid 20mm dia PVC medium grade Casing and caping with accessories on walls etc., , with sunk / surface type pressed steel terminal boxes made out of 1.6 mm MS sheet duly painted with two coats of red oxide zinc chrome primer with 2.8 mm thick laminated hylam sheet covers for mounting of switches, regulators and also including one run of 1.5 Sqmm FRLS PVC insulated unsheathed cable up to 1100 V grade conforming to IS - 694 multistranded with copper conductor as earth wire and connecting to common earth dolly for the following :-

(a) One light point controlled by one switch

(b) One fan point controlled by one switch

(c)One bell point controlled by one bell push.

(d) One 3 pin socket outlet 5amps point controlled by one switch on independent board

(e) One 3 pin socket outlet 5amps point controlled by one switch on same board

Material and labour Point wiring complete with stranded copper conductor 2.5Sqmm (nominal area) FRLS PVC insulated unsheathed cable up to 1100 V grade conforming to IS - 694 multistranded drawn through and including rigid 20mm dia PVC medium grade Casing and Caping on walls etc., with sunk / surface type pressed steel terminal boxes made out of 1.6 mm MS sheet duly painted with two coats of red oxide zinc chrome primer with 2.8 mm thick laminated hylam sheet covers for mounting of switches, regulators and also including one run of 2.5Sqmm FRLS PVC insulated unsheathed cable up to 1100 V grade conforming to IS - 694 multistranded with copper conductor as earth wire and connecting to common earth dolly for 15 Amps independent sockets points

Supply and fix switch flush type single pole, one way 5 amp.

Supply and fix ceiling rose 63x30mm three terminal,polycorbonate body complete.

Supply and fix Switch socket combination 2 in 1, 5 Amps flush type.

Supply and fix Switch socket combination 5 in 1, 5/15 Amps flush type.

Supply and fix bell push, flush type,5 Amp 240 volt.

Supply and fix ding dong AC 240 volts, single pole complete.

Supply and fix hum free electronic 3 step fan regulator 120/280 Volts of 100 watt capacity, socket type including connecting up complete all as specified and directed.

Supply and fix lamp holder polycorbonate type body suitable for batten fitting complete all as specified and directed.

Supply and fix Regal Batten for LED Tube light fitting 1x22 Watts 240 volts, including all accessories pre-wired complete all as specified as directed.Cat.No: LUMILINEPLUSBS22WLED865SPCS of Havells or equivalent philips/wipro.

Supply and fix surface mounted Environmental friendly ultra modern energy saving hexagon LED decorative bulkhead of 1x10 watts with IP66 [protection complete all as specified and directed. Cat. No.HEXAFT10WLED857SSYMBOPC of Havells or equivaent in Philips/Wipro

Supply and fix Metalica MCB SPN distribution board single pole and neutral 8 ways 240 volts with suitable bus bar with double door complete all as specified and directed.

S&F MCBs SPN of 40Amps,240 Volts, breaking capacity 10KA , C-series complete all as specified and directed..

S&F MCB SP 6 TO 32 Amps , 240volts, breaking capacity 10 KA, C-series complete all as specified and directed.

Supply and fix adore 3Star rated LED B22 Type Lamps of 15w complete all as specified and directed.

Supply laying and testing cable XLPE insulated screened PVC bedded galvanised steel strip or wire armored electric power cables (heavy duty) 1100 V grade with stranded aluminum conductor of size 25 Sqmm 2Core complete all as specified and directed. (From existing panel to proposed DB)

Excavation in trenches not exceeding 1.50m wide and n.exc 1.5m depth for foundation, laying of UG cables / pipeline etc or for shafts, wells, cesspits, manholes, pier holes etc not excluding 10 Sqm on plan in hard/dense soil and getting out complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers n.exc. 25cm in any type of soil complete all as specified and directed.

Removing surplus soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

Supply and filling pulverized stone dust to the full width of trenches for protection of cables including spreading and punning down including watering consolidation complete all as specified and directed. Note : Thickness of stone dust will be paid after cushioning after punning.

Supplying and laying unreinforced Precast Cement Concrete Cable Covers, Class LV, Type - 1, Flat, size 250mm X 150mm X 40mm in trenches for cable protection, embossed with "ELECTRIC" on the top surface incl taking down old cover complete all as specified and as directed.

Taking downold U/S copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls and floors complete all as specified and directed.

Disconnecting & taking out old U/S defective LT UG cable with Al conductor of an size/type/from trenches/walls/poles/pipes complete all as specified and directed.

Taking down fan, after disconnecting cable end, dismanthling blades and removing fan &blades and deposit to MES store and Refixing to same after completion of electrical wiring complete all as specified and directed.

Taking down old U/S DBs from wall after disconnecting cable complete all as specified and directed.

Supply and lay light grade GI tubing for cable protection of size 50mm complete all as specified and directed

M/S R R ENTERPRISES

M/s G K Enterprises

S V S Construction Co

M/s S U Enterprises

RS ENGINEERING WORK

B.R. ENTERPRISES