REPAIRS TO STEEL/WOODEN FURNITURE INCLUDING POLISHING/PAINTING TO FURNITURE AND RENEWAL UNDER BSO GE (AF) THOISE

Amount

Almirah Medium Steel with Shelves (FD- 1032)

Removing unserviceable shelves of Steel Almirah, Medium, and replacing of new shelves made out of 1.0mm thick MS Sheet, shelves shall be fixed with welding/ screws and cleats including painting, complete all as per drawing and as specified and directed by Engineer-in-Charge.

Removing unserviceable locks of Steel Almirah, Medium, and replacing with new locks, 4 lever of brass, complete all as per drawing and as specified and directed by Engineer-in-Charge. Make : Godrej/Harrison or equivalent as approved by GE.

Removing unserviceable locking system of Steel Almirah, Medium, and replacing with new locking system, 3 way locking device, complete all as per drawing and as specified and directed by Engineer-in-Charge. Make : Godrej/Harrison or equivalent as approved by GE.

Removing of unserviceable handle CP of Steel Almirah, Medium, and replacing with new handle CP, complete all as per drawing and as specified and directed by Engineer-in-Charge.

Removing unserviceable foot rest of Steel Almirah, Medium, and replacing with new foot rest made out of 1.0mm thick MS sheet and painting including welding, complete all as per drawing and as specified and directed by Engineer-in-Charge.

M&L for denting and painting to Steel Almirah, Medium, with synthetic enamel paint including applying putty wherever required and one coat of primer complete all as per drawing and as specified and directed by Engineer-in-Charge. Make : Asian/Nerolac/Luxol/Borolac/Shalimar.

Almirah Steel Large with Shelves (FD-1031)

Removing unserviceable shelves of Steel Almirah, Large, and replacing of new shelves made out of 1.0mm thick MS Sheet, shelves shall be fixed with welding/ screws and cleats including painting, complete all as per drawing and as specified and directed by Engineer-in-Charge.

Removing unserviceable locks of Steel Almirah, Large, and replacing of new locks 7 lever brass , complete all as per drawing and as specified and directed by Engineer-in-Charge. Make : Godrej/Harrison or equivalent as approved by GE.

Removing unserviceable locking system of Steel Almirah, Large, and replacing of new locking system, complete all as per drawing and as specified and directed by Engineer-in-Charge.

Removing unserviceable handle CP of Steel Almirah, Large, and replacing of new handle CP complete all as per drawing and as specified and directed by Engineer-in-Charge.

Removing unserviceable foot rest of Steel Almirah, Large, and replacing with new foot rest made out of 1.0mm thick MS sheet and painting including welding, complete all as per drawing and as specified and directed by Engineer-in-Charge.

M&L for denting and painting to Steel Almirah, Large, with synthetic enamel paint including applying putty wherever required and one coat of primer, complete all as per drawing and as specified and directed by Engineer-in-Charge. Make : Asian/Nerolac/ Luxol/ Borolac/Shalimar.

Table Office Officer Steel (FD-1003)

Removing of unserviceable top of Officer’s Steel Office Table and fixing new top made out of 18/19mm thick both side prelaminated particle board (Exterior grade) teak face with PVC edging provided all around. Top size (1680 x 870mm) complete all as per drawing and as specified and directed by Engineer-in-Charge.

Repair/replacement of drawer of Officer’s Steel Office Table, made out of 1.0mm thick MS sheet (3 Nos for each table along with unserviceable locks and replacing of new locks 4 lever of ISI marked for each drawer/shutter and fixed with PVC handle including painting complete all as per drawing and as specified and directed by Engineer-in-Charge.

Table Office Clerk Steel (FD-1004)

Removing of unserviceable top of Clerk’s Steel Office Table, and fixing new top made out of 18/19 mm thick both side prelaminated particle board (Exterior grade) teak face with PVC edging provided all around, Top size (1200 x 610 mm) complete all as per drawing and as specified and directed by Engineer-in-Charge.

Repair/Replacement of drawer of Clerk’s Steel Office Table, made out of 1.0mm thick MS sheet (3 Nos for each table along with unserviceable locks and replacing of new locks 4 lever of ISI marked for each drawer/shutter and fixed with PVC handle including painting complete all as per drawing and as specified and directed by Engineer-in-Charge.

Locker Bed Side Steel (FD-1027)

Removing unserviceable shelves of Bed Side Steel Locker and replacing of new shelves with welding including painting complete all as per drawing and as specified and directed by Engineer-in-Charge.

Removing unserviceable hasp and staple of Bed Side Steel Locker and fixing new hasp and staple CP 75mm size, complete all as per drawing and as specified and directed by Engineer-in-Charge.

Removing unserviceable handle of Bed Side Steel Locker and fixing new handle CP 100mm size, complete all as per drawing and as specified and directed by Engineer-in-Charge.

Removing unserviceable foot rest of Bed Side Steel Locker and replacing new foot rest with welding including painting, complete all as per drawing and as specified and directed by Engineer-in-Charge.

M&L for denting and painting to Bed Side Steel Locker with synthetic enamel paint OG Colour/Smoke grey including applying putty wherever required and one coat of red oxide primer, complete all as per drawing and as specified and directed by Engineer-in-Charge. Make of paint: Asian/Nerolac/Luxo/Borolac/Shalimar

Table Dining for Six Person (FD-273)

Removing unserviceable legs of Dining Table for Six Person and fixing new legs made out of well seasoned teak wood along with 50mm round plastic shoes including polishing, complete all as per drawing and as specified and directed by Engineer-in-Charge.

Removing of unserviceable top of Dining Table for Six Person and fixing new top made out of 18/19mm thick both side pre-laminated particle board (Exterior grade) teak face with wooden beeding provided all around of size 1800x900mm, complete all as per drawing and as specified and directed by Engineer-in-Charge.

Repair/Replacing of stiffener for Dining Table for Six Person, complete all as per drawing and as specified and directed by Engineer-in-Charge.

Teapoy Sunmica Top (FD-278)

Removing unserviceable legs of Teapoy and fixing new legs made out of well seasoned teak wood alongwith 40mm round plastic shoe including polishing, complete all as per drawing and as specified and directed by Engineer-in-Charge.

Removing of unserviceable top of Teapoy and fixing new top made out of 18/19mm thick both side pre-laminated particle board (Exterior grade) teak face with wooden beeding provided all around, complete all as per drawing and as specified and directed by Engineer-in-Charge.

Repair/Replacing of stiffener of Teapoy, complete all as per drawing and as specified and directed by Engineer-in-Charge.

Repair/Replacing of new frame (long rail and short rail) of Teapoy, complete all as per drawing and as specified and directed by Engineer-in-Charge.

M&L for Polishing the Teapoy after rubbing the surface with emery paper and applying french polish of best quality, complete all as per drawing and as specified and directed by Engineer-in-Charge.

Charpoy GI Pipe with Plywood Top w/o FMN Set (FD-220)

Removing of unserviceable 3 way elbow 32mm dia from existing GI pipe charpoy and replacing with new elbow, three way GI pipe, medium grade ISI marked for 32mm bore GI pipe complete all as per drawing and as specified and directed by Engineer-in-Charge.

Removing unserviceable long rail and supply and fixing new long rail made out of 32mm bore GI pipe, medium grade, ISI marked complete all as per drawing and as specified and directed by Engineer-in-Charge.

Removing unserviceable short rail and fixing new short rail out of 32mm bore GI pipe extracted from long rail as obtained from Srl items No 8.02 above including necessary cutting and threading complete all as per drawing and as specified and directed by Engineer-in-Charge.

Removing unserviceable legs and fixing of new legs made out of 32mm bore GI pipe medium grade extracted from short rail as obtained from Srl item No. 8.03 above including necessary cutting and threading and provision of shoe complete all as per drawing and as specified and directed by Engineer-in-Charge.

Removing unserviceable plywood top from Charpoy GI Pipe and tightening the frame and S&F of new plywood commercial 12mm thick of size 1980x900mm commercial type ISI marked of best quality with 65mm nut and bolt fixed to the frame including welding of broken stiffener, complete all as per drawing and as specified and directed by Engineer-in-Charge. Make of Plywood : Kitply/National/Greenply/Century

Removing unserviceable check nuts of 32mm dia and supply and fixing new check nuts, medium grade, ISI marked, complete all as per drawing and as specified and directed by Engineer-in-Charge.

Bed Ply Wood Top w/o FMN Set (FD-247)

Removing unserviceable long rail of bed and fixing of new long rail made out of well seasoned teak wood including polishing complete all as per drawing and as specified and directed by Engineer-in-Charge.

Removing unserviceable short rail of bed and fixing of new short rail made out of well seasoned teak wood including polishing complete all as per drawing and as specified and directed by Engineer-in-Charge.

Removing unserviceable plywood and fixing of new plywood 12mm thick commercial type ISI marked of size 1980x900mm, complete all as per drawing and as specified and directed by Engineer-in-Charge. Make of Plywood : Kitply/National/Greenply/Century

Repairing head rest side including legs and polishing, complete all as per drawing and as specified and directed by Engineer-in-Charge.

Repairing leg rest side including legs and polishing, complete all as per drawing and as specified and directed by Engineer-in-Charge.

Repair/Replacing of stiffener of bed, complete all as per drawing and as specified and directed by Engineer-in-Charge.

M&L for polishing the bed after rubbing the surface with emery paper and applying french polish of best quality, complete all as per drawing and as specified and directed by Engineer-in-Charge.

Chair Easy (FD-229)

Removing unserviceable front legs and fixing new front legs made out of well seasoned teak wood alongwith 25mm round plastic shoe including polishing, complete all as per drawing and as specified and directed by Engineer-in-Charge.

Removing unserviceable rear legs and fixing new rear legs made out of well seasoned teak wood alongwith 25mm round plastic shoe including polishing, complete all as per drawing and as specified and directed by Engineer-in-Charge.

Repairing seat frame, complete all as per drawing and as specified and directed by Engineer-in-Charge.

Repairing of back frame, complete all as per drawing and as specified and directed by Engineer-in-Charge.

Taking out old torn canning from seat and back of Chair Easy and recaning the same with 2mm thick cane and bordering with 4mm thick good quality cane plastic of shah brand or equivalent as approved by GE, complete all as per drawing and as specified and directed by Engineer-in-Charge.

M&L for polishing the chair easy after rubbing the surface with emery paper and applying French polish of best quality, complete all as per drawing and as specified and directed by Engineer-in-Charge.

Chair Dining (FD-279)

Removing unserviceable front legs of dining chair and fixing new front legs made out of well seasoned teak wood alongwith 25mm round plastic shoe including polishing, complete all as per drawing and as specified and directed by Engineer-in-Charge.

Removing unserviceable rear legs of dining chair and fixing new rear legs made out of well seasoned teak wood alongwith 25mm round plastic shoe including polishing, complete all as per drawing and as specified and directed by Engineer-in-Charge.

Repair/Replacing of stiffener of dining chair, complete all as per drawing and as specified and directed by Engineer-in-Charge.

Repair/Replacing of side rail of dining chair, complete all as per drawing and as specified and directed by Engineer-in-Charge.

Taking out old torn canning from seat of Chair Dining and recaning the same with 2mm thick cane and bordering with 4mm thick good quality cane plastic of shah brand or equivalent as approved by GE, complete all as per drawing and as specified and directed by Engineer-in-Charge.

M&L for Polishing the Chair Dining after rubbing the surface with emery paper and applying French polish of best quality, complete all as per drawing and as specified and directed by Engineer-in-Charge.

Table Writing Medium (FD-275)

Removing unserviceable top of Writing Table, Medium, and fixing new top made out of 18/19mm thick both side pre-laminated particle board (Exterior Grade) teak face with wooden beeding provided all around, complete all as per drawing and as specified and directed by Engineer-in-Charge.

Removing unserviceable legs of Writing Table, Medium, and fixing new legs made out of well seasoned teak wood alongwith 50mm round plastic shoe including polishing, complete all as per drawing and as specified and directed by Engineer-in-Charge.

Repair/Replacing of Stiffener of Writing Table, Medium, complete all as per drawing and as specified and directed by Engineer-in-Charge.

Repair/Replacing of side rail long of Writing Table, Medium, complete all as per drawing and as specified and directed by Engineer-in-Charge.

Repair/Replacing of side rail Short of Writing Table, Medium, complete all as per drawing and as specified and directed by Engineer-in-Charge.

M&L for Polishing of Writing Table, Medium, after rubbing the surface with emery paper and applying French polish of best quality complete all as per drawing and as specified and directed by Engineer-in-Charge.

Almirah Steel Small (FD-1032)

Removing unserviceable shelves of Steel Almirah, small, and replacing of new shelves made out of 1.0mm thick MS Sheet, shelves shall be fixed with welding/screw, cleats including painting, complete all as per drawing and as specified and directed by Engineer-in-Charge.

Removing unserviceable locks of Steel Almirah, small, and replacing with new locks 4 lever of brass, complete all as per drawing and as specified and directed by Engineer-in-Charge. Make : Godrej/Harrison or equivalent as approved by GE.

Removing unserviceable locking system of Steel Almirah, small, and replacing with new locking system, 3 way locking device, complete all as per drawing and as specified and directed by Engineer-in-Charge.

Removing of unserviceable handle CP of Steel Almirah, small, and replacing with new handle CP, complete all as per drawing and as specified and directed by Engineer-in-Charge.

Removing unserviceable foot rest of Steel Almirah, small, and replacing with new foot rest made out of 1.0mm thick MS sheet and painting including welding, complete all as per drawing and as specified and directed by Engineer-in-Charge.

M&L for denting and painting to Almirah Steel Small with synthetic enamel paint including applying putty wherever required and one coat of primer, complete all as per drawing and as specified and directed by Engineer-in-Charge. Make : Asian/Nerolac/Luxol/Borolac/Shalimar.

Chair Tubular Steel with Arms (FD-75(M)

Removing unserviceable arms rest of Tubular Steel Chair and S&F new arms rest made out of well seasoned 2nd class hard wood including painting with two coats of synthetic enamel black paint of best quality complete all as per drawing and as specified and directed by Engineer-in-Charge. Make of Paint : Asian/Nerolac/Luxol/Borolac/Shalimar.

Removing unserviceable seat of Tubular Steel Chair and S/F new seat made out of well seasoned 2nd class hard wood duly caned with 2mm wide plastic cane as per Godrej pattern, including fixing the seat frame to the chair with 65 mm machine screw with nuts and washers complete all as per drawing and as specified and directed by Engineer-in-Charge.

Providing new 2 Nos 10mm MS rod support duly welded between the seat and back portion of leg of the chair including 2 coats of synthetic enamel paint (Olive Green colour) over a coat of red oxide primer complete all as per drawing and as specified and directed by Engineer-in-Charge.

Removing unserviceable back of Tubular Steel Chair and S&F new back made out of well seasoned 2nd class hard wood duly caned with 2mm wide plastic cane as per Godrej pattern, including fixing the back frame to the chair with 65 mm machine screw with nuts and washers, complete all as per drawing and as specified and directed by Engineer-in-Charge.

Painting of Steel frame of Chair CB with arm with one coat of synthetic enamel paint olive green colour duly scraping out old dirt stains complete all as per drawing and as specified and directed by Engineer-in-Charge.

Table Dressing Gents with Mirror (FD-230)

Removing of broken damaged knobs of table dressing Gents & S&F new chromium plated 35mm round knob of approved quality complete all as per drawing and as specified and directed by Engineer-in-Charge.

Removing of damaged mirror of table dressing Gents & S&F new mirror of size 380mmx760mmx5.5mm thick complete all as per drawing and as specified and directed by Engineer-in-Charge. (Make : Swastik/Gold Fish/Saint Gobain/Modi Guard)

Removing of Broken Damaged back plywood of mirror of table dressing Gents & S&F new plywood BWR Grade 6mm thick including fixing of two Nos of Keys plate complete all as per drawing and as specified and directed by Engineer-in-Charge.

Sofa Chair with Arms (FD-281)

Removing of old broken damaged hand rest of Sofa Chair with Arms & S&F new hand rest made out of 1st class teak wood well seasoned, complete all as per drawing and as specified and directed by Engineer-in-Charge.

Removing of Old foam cushion of Sofa Chair with Arms & supply & fixing of new polyurethane foam cushion of 40 density duly covered with upholsty fabric/tapesty cloth of approved shade/texture complete all as per drawing and as specified and directed by Engineer-in-Charge. (Make of Cushion : SSF/Kuber/Kurlon/Sleepwell)

Removing of Old broken damaged legs of Sofa Chair with Arms & S&F new legs made out of 65mmx65mmx150mm well seasoned teak wood, complete all as per drawing and as specified and directed by Engineer-in-Charge.

Table Centre (FD-274)

Removing unserviceable top of centre table and fixing new top made out of 18/19mm thick both side pre-laminated particle board (Exterior Grade) teak face, provided with wooden beeding all around, complete all as per drawing and as specified and directed by Engineer-in-Charge.

Removing unserviceable legs of centre table and fixing new legs made out of well seasoned teak wood alongwith 25mm round plastic shoes including polishing, complete all as per drawing and as specified and directed by Engineer-in-Charge.

Repair/Replacing of Stiffener of centre table, complete all as per drawing and as specified and directed by Engineer-in-Charge.

Repair/Replacing of side rail long of centre table, complete all as per drawing and as specified and directed by Engineer-in-Charge.

Repair/Replacing of side rail short of centre table, complete all as per drawing and as specified and directed by Engineer-in-Charge.

M&L for Polishing of table center after rubbing the surface with emery paper and applying French polish of best quality, complete all as per drawing and as specified and directed by Engineer-in-Charge.

Double Bunk Bed Steel (TP) Removing Old Ply from Charpoy Double Bunk Steel and tightening the frame and S&F new Plywood commercial type 12mm thick of size 1980x900mm ISI marked with 10 Nos 65mm nut and bolt to the frame and including welding of 02 Nos of Stiffener made out of flat iron 40mm x 6mm thick including drilling holes etc, complete all as per drawing and as specified and directed by Engineer-in-Charge. (Make of plywood : Kitply/National/Greenply/Century)

Chair Revolving Steel with Arms (High/Medium/Low Back)

M&L for removing the existing broken leg portion consisting wheel of chair revolving steel and welding the broken prolonged legs and replacing the broken wheels by welding/screwing and fixing the legs duly black painted, Greasing of all moveable parts shall be done, complete all as per drawing and as specified and directed by Engineer-in-Charge.

Removing of old Hydraulic system from Chair Revolving Steel and supply and fixing new Hydraulic system, complete all as per drawing and as specified and directed by Engineer-in-Charge.

Repair/Replacing new back of chair revolving Steel made out of high density cool foam of size 50mm thick including all back portion covered with tepestry cloth , complete all as per drawing and as specified and directed by Engineer-in-Charge.

Repair/Replacing new seat of Chair Revolving Steel made out of high density cooled foam of size 75 mm thick including all seat portion covered with tepestry cloth, complete all as per drawing and as specified and directed by Engineer-in-Charge.

S&F in repair new handle of chair Revolving Steel made out fibre, complete all as per drawing and as specified and directed by Engineer-in-Charge.

Locker Wooden (FD-222)

M&L for removal of the existing damaged handles and hasps and staples of locker complete and replacing the same with new pair of bow handles aluminium anodised 100mm long and aluminium anodised 75mm long hasps and staples duly fixed to the shutters complete all as per drawing and as specified and directed by Engineer-in-Charge.

M&L for replacing old top with new Top of Locker Wooden made of 12mm thick plywood both faces commercial BWR type including two coats of natural French polish over one coat of wood filler with glossy finish matching to all components and complete all as per drawing and as specified and directed by Engineer-in-Charge. (Make of plywood: Greenply/Kitply/Century/National ISI mark)

M&L for replacing old bottom portion with new bottom of Locker Wooden made of 12mm plywood both faces commercial BWR type including two coats of natural French polish over one coat of wood filler with glossy finish to all components complete all as per drawing and as specified and directed by Engineer-in-Charge. (Make of plywood: Greenply/Kitply/Natural/Century ISI Mark)

M&L for replacing old shutter with new shutter of Locker Wooden made of 6mm plywood both faces commercial BWR type with hinges both brass 50mm long including two coats of natural French polish over one coat of wood filler with glossy finish to all components complete all as per drawing and as specified and directed by Engineer-in-Charge. (Make of plywood: Greenply/Kitply/Natural/Century ISI Mark)

M&L for replacing old side portion with new side portion of Locker Wooden made of 6mm plywood both faces commercial BWR type including two coats of natural french polish over one coat of wood filler with glossy finish to all components complete all as per drawing and as specified and directed by Engineer-in-Charge. (Make of plywood: Greenply/Kitply/Natural/Century ISI Mark)

M&L for removal of broken base including all the four legs of locker and replacing the base with 4 legs made of first class hard wood (Teak) with 40 x 25 stiffener on all 4 sides fixed below the bottom portion of the locker 610 mm long on both wider portions and 450 mm on the deeper portions with 4 legs also made of 1st class hard wood (Teak), each measuring 75mm long 50 x 50 mm at top tapering to 40 x 40mm at bottom and French polishing all exposed surfaces and fixed at the base complete all as per drawing and as specified and directed by Engineer-in-Charge.

M&L for Polishing the Locker Wooden after rubbing the surface with emery paper and applying one coat of French polish of best quality, complete all as per drawing and as specified and directed by Engineer-in-Charge.

Peg Table (FD-277)

M&L for removal of the existing damaged top of peg table and replacing the same with new top 18/19mm thick pre-laminated particle board 450 x 300 mm size with one side decorative teak finish including 18mm wide, 4 mm thick teak wood edging on all sides including French polishing teak wood edging complete all as per drawing and as specified and directed by Engineer-in-Charge.

M&L for removal of the existing damaged any one leg of peg table and replacing the same with new leg 362 mm long x 30mm x 50mm first class hard wood (Teak), and all exposed surfaces French polished and fixed complete all as per drawing and as specified and directed by Engineer-in-Charge.

M&L for Polishing the Peg Table after rubbing the surface with emery paper and applying one coat of French polish of best quality, complete all as per drawing and as specified and directed by Engineer-in-Charge.

Rack Steel Open Large Six Shelves (FD-1038)

Removing unserviceable shelves and replacing of new shelves of Rack Steel Open Large made out of 1.0mm thick MS Sheet. Shelves shall be fixed with welding/nut & bolt including painting, complete all as per drawing and as specified and directed by Engineer-in-Charge.

M&L for denting and painting to Rack Steel Open Large six Shelves with synthetic enamel paint olive green and including one coat of primer, complete all as per drawing and as specified and directed by Engineer-in-Charge. Make : Asian/Nerolac/Luxol/Borolac/Shlimar.

Sofa Set Five Seater with Cushion

M&L for Repairing Old worn out/unserviceable Tapestry Cloth, Cushion, Hession Cloth, coir fiber copper spring 100/150mm, timber (2nd class hard wood), repair/replacing with new materials including tapestry cloth of not less than Rs. 250/- (duly approved by Engineer-in-Charge), cushion of 32mm density and 2nd class hard wood, complete all as per drawing and as specified and directed by Engineer-in-Charge.

Supply only new Table Centre two tier Size 900x450x400mm (FD-274) complete all as per drawing and as specified and directed by Engineer-in-Charge.

Supply only new Almirah Medium Steel with Shelves (FD-1032) complete all as per drawing and as specified and directed by Engineer-in-Charge.

Supply only new Sofa Set 5 Seater with Cushion, complete all as specified and directed by Engineer-in-Charge. Make : Antique Model No A-138 (TP)

Supply only new Table Bed Side (FD-ED/MAP/15(R)) complete all as per drawing and as specified and directed by Engineer-in-Charge.

Supply only new Almirah Steel Small with Shelves (FD-1034) complete all as per drawing and as specified and directed by Engineer-in-Charge.

Supply only new Table Office Officer (TP) complete all as specified and directed by Engineer-in-Charge. Make- Godrej, Model- Mayfair (FUMFTBLXWBXP0SET)

Supply only new Locker Bed Side Steel (FD-1027/257) complete all as per drawing and as specified and directed by Engineer-in-Charge.

Supply only new Table Dining 6 Persons (1500x900x760mm) (FD-273/1115) complete all as per drawing and as specified and directed by Engineer-in-Charge.

Supply only new Chair Visitor Cushioned, complete all as specified and directed by Engineer-in-Charge. Make- Godrej, Model- FU-1004 (TP)

M/S Behl Sons