Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹28.8 LAccepted-AOC S NO 211 BEHIND SANE GURUJI HOSPITAL VIDHYA VIHAR HSG SOC HADAPSAR PUNE 411 029 | 411029 | 1 | Accepted-AOC L1 bidder | |
| 2 | 2₹31.8 L+₹2.6 L (8.87%)Rejected-Finance 54 10 SHANTI NAGAR NEAR SHINDE CHATRI WANAVADI PUNE 411040 | PUNE | MAHARASHTRA | 411040 | 2 | Rejected-Finance Not lowest bidder | |
| 3 | 3₹41.4 L+₹12.2 L (41.6%)Rejected-Finance 10 MAKHAN LAL SADHUKHAN LANE PO PS BARRACKPORE KOLKATA 700120 W B | KOLKATA | NORTH 24 PARGANAS | WEST BENGAL | 700120 | 3 | Rejected-Finance Not lowest bidder |
Tender Value
₹46.5 L
EMD Value
₹93,000
Closing Date
12 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE SOUTH PUNE
NO 1 GENERAL BHAGAT MARG PUNE 411040
8425 WELCOME MAINT / PERIODICAL SERVICES AND CERTAIN BR REPAIRS AT MINTSD MD / OTM ACCN UNDER AGE BR-II SOUTH PUNE
2023_MES_595769_1
8425 GE SOUTH PUNE
Open Tender
Civil Works
Item Rate
273 days
GE SOUTH PUNE
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE SOUTH PUNE
₹93,000
1 Jul 2023
16 May 2023
14 Jun 2023
16 May 2023
12 Jun 2023
31 May 2023
Amount
M&L for preparation of old decorated surfaces of walls by brooming down and scrapping whereever necessary and applying one coat of white wash complete all as specified and directed
M&L for complete removal of existing treatment on wall and applying two coat of white wash on wall complete all as speficied and directed.
M&L for preparation of old decorated surfaces of ceiling by brooming down and scrapping whereever necessary and applying one coat of white wash complete all as specified and directed
M&L for preparation of old decorated surfaces of walls by brooming down and scrapping whereever necessary and applying one coat of oil bound distemper white or tinted complete all as specified and directed.
M&L for complete removal of existing treatment on wall and applying two coat of oil bound distemper over a coat of alkali resistence primer, white or tinted on wall complete all as speficied and directed.
M&L for preparation of new plastered surfaces of walls by brooming down and scrapping whereever necessary and applying two coats of oil bound distemper white or tinted complete all as specified and directed.
M&L for complete removel of existing treatment of walls by scrapping, cleaning by water jet, soffits / facia of chajja / roof slab etc and applying two coats of Apex Ultima Weather shield paint of approved colour over a coat of primer etc. complete all as specified and directed. (Note : Contractor has to give 3 Years Guarantee Certificate, if within guarantee period Apex removes/ washout, contractor has to re-paint with Apex at his own cost)
M & L for preparation of surface of any description (plastered and old decorated) over 10cm width or girth and applying one coat of Apex Ultima Weather shield paint complete all as specified and directed.
M&L for cleaning of Manglore tile roof by scrapping, cleaning by water jet etc and applying two coat of Apex Ultima Weather shield paint or tinted over a coat of primer etc complete all as specified and directed. (Note : Contractor has to give 3 Years Guarantee Certificate, if within guarantee period Apex removes/washout, contractor has to re-paint with Apex at his own cost.)
M&L for preparation of old painted wooden surfaces exc. 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.
M&L for preparation of old painted wooden surfaces exc. 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.
M&L for preparation of old painted steel surfaces of any description exc. 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for french polishing on surfaces of any description, width or girth including cleaning and preparation of surfaces including a coat of wood filler on old work with one or more coats complete all as specified and directed.
M&L for preparing old painted wooden surfaces of any description, n.exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for preparing old painted steel surfaces of any description, n.exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for preparing old painted concrete or plastered surfaces exc. 10 cm width or girth and applying one coat of plastic emulsion paint on walls, complete all as specified and directed.
M&L for preparing old painted concrete or plastered surfaces exc. 10 cm width or girth and applying two coats of plastic emulsion paint on walls, complete all as specified and directed.
M&L for one coat of oil bound distemper on ceiling including preperation of old plaster surface complete all as specified and directed.
M& L for two coats of wall care putty, level and smoothen the surface and cure the first coat lightly once it dries and applying second coat of 0.5-1 mm thickness once the first coat is fully dried & set. The thickness of each coat should not exceed 1mm and total thickness of putty should not be more than 2mm ,complete all as specified and directed.
M& L for One coat of wall care putty, level and smoothen the surface, apply the putty of 0.5-1 mm thickness complete all as specified and directed.
M&L for cleaning of random rubble masonary walls with ample of water and racking out the worn out or loose pointing and filling the same with sand, cement and SBR thick paste (1:5:0.1) followed by two liberal coats solvent based silicon coating to make the walls water repellent and leakage free from rain beating make Pidilite, Buildcore chemicals Chemistik or equalent, complete all as specified and directed.
M&L for preparation of old decorated surfaces of walls by brooming down and scrapping whereever necessary and applying one coat of cement base paint complete all as specified and directed
M&L for preparation of new plastered surfaces of walls by brooming down and scrapping whereever necessary and applying two coats of cement base paint complete all as specified and directed
M&L for preparation of old decorated surfaces of walls by brooming down and scrapping whereever necessary and applying two coats of cement base paint complete all as specified and directed
M&L for writing letters on PVC coloured sheet of size 450mm x 200mm x 6mm thick, writing letters / numerical as directed by Engineer-in-Charge and fixing to building with screws 4 Nos. each, any height of Building upto 12m height, size of letter 80 x 125mm with max of 4 letters complete all as specified and as directed.
All as per serial item no. 25.00 above but on Circular plate of 450 mm Dia (Qtr No) complete all as specified and as directed.
M&L for applying Asian paints Smart Care Damp proof Ultra on the wall, chajja, roof suface. The application method shall be followed with and including as appended below:- a) In the existing surface, the substrate must be checked for its soundness, damaged portions & hollow areas must be repaired with Polymer modified mortar. b) Small cracks 3mm or less should be open out, cleaned & filled with AP smart care Crack Seal & wider cracks should be filled with Polymer modified mortar. All corners and joints of drain pipes, channels etc. must be treated with polymer modified mortar prior to coating application. Ensure that the coating is applied at least 6 inch inside the drain pipe. c) Apply self-priming coat (3 Part Asian paints Smart Care Damp proof Ultra and 1 Part Water) and Allow to dry for at least 3-4 hrs prior to application of subsequent coat. d) Apply two coats of Apex Ultima Weather shield paint.
S&F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws including dismantling of old unserviceable AC sheet (corrugated or semi corrugated)/ PVC sheet in roofing including ridges etc complete all as specified & directed.
S&F pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strengh of 550 mpa as of roof covering/ridges fixed with self tapping screws including dismantling of old unserviceable sheet complete all as specified & directed.
S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates including Dismantling wrought iron or mild steel iron of any description not otherwise provide for, complete all as specified & directed.
Taking down chowkhat or frames exc. 1.5 sqm but n. exc. 4 sqm each with shutter without taking off shutter from the frame complete all as specified and directed.
Taking down chowkhat or frames wooden / steel n. exc. 1.5 sqm each with shutter without taking off shutter from the frame complete all as specified and directed.
Taking down shutters of any description n. exc. 1 Sqm each, complete all as specified and directed.
Taking down shutters of any description exc. 1 Sqm each and n. exc. 2 Sqm each, complete all as specified and directed.
S & F pressed steel frames for doors with one & more rebates including necessary fixing lugs, hinges, lock strike plate etc complete as specified size of frame 105 x 60mm with and including MS hold fast - 3 Nos., MS cold rolld 100mm size butt hinges - 03 Nos., welding to existing MS frame, PCC bed block 1:2:4 type B1 for embadding hold fasts and plain cement concrete 1:3:6 type C1 (12.5mm graded stone aggregate) for filling in MS frame, complete all as specified & directed.
S & F pressed steel frames for doors with one & more rebates including necessary fixing lugs, hinges, lock strike plate etc complete as specified size of frame 125 x 60mm with and including MS hold fast - 6 Nos., MS cold rolld 100mm size butt hinges - 06 Nos., welding to existing MS frame, PCC bed block 1:2:4 type B1 for embadding hold fasts and plain cement concrete 1:3:6 type C1 (12.5mm graded stone aggregate) for filling in MS frame, complete all as specified & directed.
S&F IInd class hard wood 35mm thick factory made, panelled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneer particle board with commercial veneering on both faces. The size of the rail as per IS 1003 (Part-I) Kiln seasoned and chemically pressure treated, complete all as specified and directed.
S&F IInd class hard wood 35mm thick factory made, glazed and skeleton shutter open rebated and prepared to receive glass gauge etc edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc. The size of the rail and stile as per IS 1003 (Part-I), Kiln seasoned and chemically pressure treated complete all as specified and directed.
S & F Solid PVC door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with MS tube, suppling and fixing in opening complete all as per specification and as directed by Engr-in-Charge, complete all as specified and directed.
S&F factory made solid panel PVC door shutter 30mm thick (stiles) consisting of frame made out of M.S tubes for top & bottom rails; M.S frame shall be covered with heat moulded plain colour PVC ‘C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification and drawing as per product drawing given on relevant page of SSR Part-II 2020 Refer item No. 8080 as specified and directed by Engr-in-charge.
S&F stainless steel butt hinges medium weight 100mm size complete all as specified and directed.
S&F aluminium anodised barrel tower bolt 200mm legth of excluded section and fixed, complete all as specified and directed.
S&F 300mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and directed.
S&F Aluminium handle cast type, anodised 150mm size, complete all as specified and directed.
S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.
S&F in repair stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.
M&L for prepration of new or previously untreated wooden surface and apply two coats synthetic enamelled paint over one coat of pink primer of any descriptiion, not otherwise described over 10cm width or girth, complete all as specified and directed.
M&L for prepration of new or prreviously untreated steel surface and apply two coats synthetic enamelled paint over one coat of red oxide primer of any descriptiion, not otherwise described over 10cm width or girth, complete all as specified and directed.
S&F three track sliding window with two or more shutter witth 4 mm thick tinted glass , one shutter of stainless steel wire cloth 0.36 mm nominal dia & 1.18 mm width aperture for mosquito proofing with good quality bearing, handle lock, rubber beading and glazing clips etc using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified directed by Engr-in-Charge. (a) Bottom frame 20620 (b) Top frame & Verrtical 20621 (c) Handle (side) 20606 (d) Shutter inter lock 20724 (e) Shutter top & Bottom 20844 (f) Glazing Clip 19352
S&F aluminium powder coated two track sliding window with two shutters of 4mm thick tinted glass of modigaurd including good quality of bearing handle, locks, PVC rubber lining etc complete all as specified and directed :- Two track bottom – 20957, two track top/vertical – 20958, Handle – 20606, Interlocking – 20605, Top and bottom – 20604.
S&F aluminium powder coated ventilator with moveable louvers including 100mm wide pinheaded glass strip using following sections of `Jindal Aluminum Ltd ' or equivalent in Ajit India Pvt Ltd or Crystal Bombay, as approved all as directed by Engineer-in-Charge (a) Frame - 20048 (b) Glazing clip - 19352
S&F sheet glass ordinary quality, 4 mm thick and glazing with oil putty in square n.exc. 0.50 sqm in each pane including hacking out old broken glass (any thickness, size , quality or description) from metal frames , glazed with putty of fixed with beads as specified and directed by Engineer- in-charge.
S & F frosted/figured glass pin head type, 4 mm thick and glazing with oil putty in square n.exc. 0.50 Sqcm in each pane including hacking out old broken glass (any thickness, size , quality or description) from metal frames , glazed with putty of fixed with beads as specified and directed by Engineer- in-charge.
S & F aluminium anodised powder coated of ivory/brown colour frame / shutters for windows / doors / Ventilator with one or more rebates including joining cleat, glazing clips, anodised aluminium snap beading for fixing, screws, anodised aluminium fittings such as peg stays, handle etc complete all as specified and directed.
S&F aluminium powder coated single leaf door on pivots alongwith hydraulic door closer door lock , handle, 5mm thick plane glass fixed with rubber beading in top panel and glazing clips MS clamps and 12mm thick laminated particle board as bottom pannel both side laminated using following sections as given in 'JINDAL' catelogue complete all as specified and as directed:- (a) Rectangular tube - 14005 (b) Vertical rail - 19501 (c) Top rail -19503 (d) Middle rail -20060 (e) Bottom rail- 19511
S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing poivet made of brass, other parts made of brass, other part made of mild steel heavy duty and fixed, complete all as specified and directed.
M & L for water proofing treatment to sunken slab, walls, etc. shall be carried out as specified below and as directed by Engineer-in-Charge:- (a) Dismantling & remove the existing lean concrete completely and clean the sunken portion of toilet / Baths / WCs / Kitchen thoroughly remove laitance, dirt, dust etc. (b) Form angle fillet of size 40 mm x 40 mm along the junction of wall and floor by using polymer modified mortar (“ Dr fixit” Pidicrete URP” or equivalent). (c) Sanitary pipes entering through walls and floor shall be sealed with “Dr Fixit Bathseal Tape” and the gaps to be grouted with non-shrink cementitous grout “Dr Fixit Bathseal Grout” or equivalent. Nahani traps etc to be fitted securely and the gaps around it to be grouted in the same manner. (d) Apply one coat of a Bitumen-modified polymer coating “Dr Fixit Bathseal Plus” or equivalent on all angle fillets by brush and cover it with 100mm open woven mesh when it is still wet and applying second coat of the same coating on the angle fillets and allow it to dry completely. (e) In the remaining area, in dry substrate condition brush apply first coat of the same coating and further apply second coat when first is dry. Extend the coating upto 150mm above the FFI. Above FFI, another cementitious waterproofing waterproof coating “Dr Fixit Pidifin 2 K” or equivalent to be further applied right upto 2.1 m to waterproof the shower area also, if it is a bathroom or bath cubicles of a sanitary annex and apply second coat after 6-8 hoours and allow to dry completely. (f) After 2 to 3 days, sunken portion must be overlaid with a 50 mm thick concrete screed M 15 type B0 mixed with integral WPC (Liquid) laid to stope 1:60 towards outer face of wall. Provide 40 mm OD UPVC pipe at the lowest point with 300 mm projection beyond the outer face of the wall. Then fill up the sunken portion with lean concrete 1:5:10 type E2. (g) After completing plumbing work in the toilet/WC/Bath/Kitchen, floor, tiling work (floor and dado) to be carried out by using suitable Tile Adhesives and ready to make tile grouts of approved makes such as Dr Fixit, FOSROC SIKA, MC BUCHEMIE, ROFF, etc. Note: Lean concrete 1:5:10 type E-2 shall be measured and paid separately under respective item of BOQ.
M&L for PCC 1:5:10 type E-2 using 40 mm graded brick aggregate as in filling sunken portion, complete all as specified and directed.
M&L for PCC 1:2:4 type B0 (using 12.5 mm graded brick aggregate) as in coving rounded, chamfered etc on sunken floor, complete all as specified and directed.
M & L for non skid joint free ceramic coloured (dark shade) tiles or size 300mm x 300mm x 7 to 8mm thick in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in CM (1:6) including demolition of stone slabs and tiles of any description or thickness laid bedded and pointed in any mortar etc complete all as specified and directed by Engineer-in-Charge.
M&L for Polished Vitrified Ceramic tiles 10 mm thick of size 600 x 1200mm as in floors/ skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 15mm thick screed bed in CM (1:6) including demolition of stone slabs and tiles of any description or thickness laid bedded and pointed in any mortar etc complete all as specified and as directed.
M&L for glazed colour ceramic tiles of size 300mm x600mm x 7 to 8mm thick in wall laid over and including 10 mm thick CM 1:4 backing coat , set and jointed in neat cement slurry and pointed in coloured cement to match with colour tiles including demolition of stone slabs and tiles of any description or thickness laid bedded and pointed in any mortar etc complete all as specified and directed.
M&L for 25 mm thick concrete type B0 1:2:4 using 12.50 mm graded stone aggregate as in floor leveling course etc. including demolition of existing cement concrete, complete all as specified and directed.
M & L for granite 18-20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, Door cills ,cooking platforms and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite including dismantling of existing old unserviceable stone slabs and tiles of any description or thickness, complete all as specified and directed.
Rounding to edges of stone slab one edge, such as in steps, cooking platform and other similar situations, complete all as specified and directed.
M&L for machine cut cuddappa stone 20 to 22 mm thick both side polished bedded & jointed in CM (1 : 3) including dismantling of old unserviceable stone slabs and tiles of any description or thickness, complete all as specified and directed.
Demolition of cement concrete in ground floor and pavings not exc. 15 cm thickness (below or above GL), complete all as specified and directed.
M&L for 75 mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate ) as in pavement, sub base and flooring etc. complete all as specified and as directed.
M&L for chequrred cement concrete tiles 30cm x 30cm x 20mm thick glossy finish, set jointed and pointed in neat cement slurry in floor with grey cement and pigment laid over and including 20mm thick screed bed in CM 1:4 including dismantling of old unserviceable stone slabs and tiles of any description or thickness in floors, aprons laid, bedded and pointed in any mortar, complete all as specified and directed.
M&L for coloured precast cement concrete interlocking paver block of glossy finish any shape and size confirming to IS-15658-2006, 60mm thick, M-35 grade with grey cement and no pigment laid over & including 30mm thick stone dust / grit including dismantling of old unserviceable stone slabs and tiles of any description or thickness in floors, aprons laid, bedded and pointed in any mortar, complete all as specified and directed.
M&L for providing cement concrete type C- 1, 1: 3:6 (using 20mm graded stone aggregate) 75 mm thick as in plinth protection finishing even and smooth using extra cement also provive 6mm wide joints throughout the thickness of plinth protection, complete all as specified and directed.
M & L Mirror polished kota stone slab flooring 20-25 mm thick, over 20 mm thick cement screed base in cement mortar 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shed of slab including rubbing and polishing complete including dismantling of old stone slabs and tiles of any description or thickness in floors, aprons laid, bedded and pointed in any mortar, complete all as specified and directed.
Ditto all as per item No. 73 above but as in riser of steps, skirting, dado and pillars etc., complete all as specified and directed.
M&L for PCC 1:2:4 type B1 using 20mm graded stone aggregate as in coping including weathering and throating including necessary form work etc., complete all as specified and directed.
Taking down cement plaster from old brick / stone masonry walls etc. including racking out joints, hacking for keys and scrubbing down with water complete all as specified and directed.
M&L for rendering 10mm thick in cement mortar 1:6 on fair faces of brick / concrete surfaces with sagol finish, complete all as specified and directed.
M&L for rendering 15 mm thick in CM(1:4) on fair faces of brick/concrete, surfaces sponge finish, complete all as specified and directed.
Demolition of brick work or stone / boulder masonary, built in cement mortar including all quoins, arches, pillars etc., complete all as specified and directed.
M & L for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6), complete all as specified and directed.
Taking up or down GI water tubing and connections including cleaning for refixing or removal to store complete all as specified and directed for following size of pipe :-
15mm bore.
20mm bore
25mm bore
Supplying, fixing, jointing and testing galvanised iron tubing medium grade with all fitting such as bends, elbow, socket, reducer etc and fixed to wall, ceiling or laid in floor complete all as specified and as directed for the following sizes:-
15mm bore.
20mm bore
25mm bore
M&L for 15 mm bore two way bib tap, chromium plated cast copper alloy long body with wall flange, complete all as specified and directed.
Supply and fix in repairs, stainless steel plate rack of size 36inch x 31inch x 10inch, made out of 0.63mm thick stainless steel sheet (Grade AISI 304 18/8), S S screws and round pipe, fixed to wall with screws complete all as specified and as directed. Make – Blue Star Silver Shine Cat No.KPR-315 or equivalent make as mentioned here-in-after, complete all as specified and as directed.
S&F in repair single lever basin mixer without popup waste with 450mm long braided houses complete all as specified and directed. (Make : Jaquar Product code ARI-CHR-39001B or equivalent model in Kohler as approved.)
S&F in repairs vitreous china wash down water closet pan, 'Pedestal' coloured, including fixing bolts etc including PVC seat cover white with flat bottom including MS, CP or aluminium anodised hinges devices including PVC low level flushing cistern 10 Ltr capacity with all internal fitting, inlet, outlet pipe connections etc. complete all as specified and directed.
S&F in repairs vitreous china, squatting pan, 'Orissa' pattern, size 580 x 440mm white, with integral foot rest, including concrete bedding and PVC flushing cistern 10 Ltr capacity including all internal fitting, inlet, outlet pipe connections etc. complete all as specified and directed.
S&F high density 40mm bore polythylene pipes (HDPE) of pressure rating 6 kg/cm2 fixed complete to wall or laid under floors with necessary socket, elbo & bend etc complete fixed to wall or in floors etc, complete all as specified and as directed.
S&F in repair PVC low level flushing cistern 10 ltrs capacity make ISI or equivalent incl all internal fitting, pair of bracket, including inlet/outlet PVC pipe connections etc, complete all as specified and as directed.
S&F aluminium powder coated fancy type curtain rod 25 mm bore, medium weight, complete all as specified and as directed.
S&F aluminium powder coated fancy type decorative brackets suitable for 25 mm dia curtain rod (minimum projection from wall 75 mm ) fixed to wall including drilling, rawl plug, screws etc complete all as specified and as directed.
S&F PVC (SWR), 75mm dia outlet floor trap, plain with grating including jointing with solvent cement, fixed to cement concrete type B1 1:2:4, complete all as specified and directed.
S&F in repairs roof tiles mangalore pattern inter locking at side joints laid dry etc , complete all as specified and directed.
S&F in repairs ridge tile or hip tiles suitable for mangalore pattern of roofing tiles bedded and jointed in CM (1:6) etc, complete all as specified and directed.
S & F vitreous china urinal flat back, size of 465 x 355 x 265 mm white (minimum) with grating and union for discharge pipe etc., complete all as specified and directed.
M&L for vitreous china urinals URS-WHT-132530 of Jaquar with fixing accessories complete including providing and fixing plus, bedding urinal against wall in cement mortar 1:2 securing urinal to plus with and including 60mm long brass screws, pointing around urinal back in cement; fixing auto closing concealed urinal flush valve PRS-CHR-073 of Jaquar, flush pipe, grating and Union for discharge pipe complete all as specified and as directed.
S&F 150x150mm size salt glazed stone ware gully trap, square or round mounthed, 'P' type, including jointing to waste pipe, fixed to cement concrete type B1 1:2:4, compleete all as specified and directed.
M&L for gypsum ceiling board for ceiling pre-painted, perforated finish, 600 x 600 x 9 to 9.5mm thick in size of approved brand/make, laid over and including grid work of size 600 x 600mm, made out of 0.5mm thick G.I. tee 32 x 24 mm for main, 25x24mm for cross tee and 20 x 20mm angle fixed on wall, powder coated finish on exposed faces of tee and angle. hung from ceiling using 2 mm thick G.I. Suspension wires spaced at 1200 mm on main runners including making niches for fans/light etc, incl taking down boarding/ceiling of any description, fixed in any position etc with nails, complete all as specified and directed.
S&F in repair 200mm dia PVC half round rain water gutter incl fittings such as end drop, running drop etc, omplete all as specified and as directed.
M/s.BAJRANG CONSTRUCTION
R k construction
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .