WBPWD/EE/HED/NIQ-205 (2nd Call) of 2023-2024

Amount

SITC of automatic lift (as per manufacturer design and as per detailed spec below conforming to IS) and putting into operation after final testing in the existing lift shaft complete with all accessories and repairing the damage wall/floor if any etc to complete as req.

Make: Category 1-OTIS/KONE/SCHINDLER

Type-Passenger lift

Load:10 passengers 680 kg

Contol-Microprocessor based with AC variable voltage and variable frequency(VVVF)

Machine-Energy efficient machine .gearless, without machine room (MRL)

Speed-1m/s

Floor served-G+2

Landing-03(three) all on same side

Total rise- 7 M

Operation-Microproccesor based simplex full collective with or without attendant

Signals-Digital car position indicator,car travels direction indicator in car & at all landing with call registration indicator.Buttons-all buttons on car and landing shall be luminous & encoded with braille

Levelling accuracy-+-5mm micro levelling arrangement

Car inside- As per Manufacturer Standard.

Car Entrance-Clear opening 800 mm protected with car door

Car enclosure-Stainless steel sheet (20 SWG) with hairline finish & hand rail

Car Ceiling and lighting-Stainless steel with hairline finish and LED lighting& fan

Car Ventilation-Pressure fan with anodized aluminium grill.

Car flooring-Decorative garanaite flooring ar per direction of EIC

Car door-Stainless steel central opening (COPD) automatic door provided with V3F controlled door drive system

Landing door-Stainless steel central opening door operated synchronizing with car door

Door opening-Automatic power operated door with full length photocell assembly light curtain sensor

Protective Device and other accessories

ARD-Automatic rescue device complete with dry maintenance free batteries as required for automatic evacuation to the nearest floor in case of power failure/single phasing and othres

Overload Protection-Fully loaded with overload protection on overloading the lift car will not start with door opening & give audio and display indication

Emergency lighting in car-Battery operated emergency lighting in the car

Intercom system-Battery operated intercom system in Lift car,machine room and control room

Emergency alarm-Battery operated alarm bell system in lift car

Fireman Switch-Fireman switch at main landing terminal

Voice synthesier-Voice announcement system in the car to announce the position of lift in the hoistway as the car passes or stops at floor served by elevator

Main belt/wire rope-As per manufactures standard conforming to IS

Dimension of shaft and power supply

Electric power supply AC 415 v, 3 PHASE, 50 hz terminated in machine room as per IS

The agency must procure all the materails from manufature /OEM or from their authorised sale channel so that the standard warranty becomes applicable to the products to be delivered and install by them

Documents that authenticates such procurement from the manufacturer/OEM/or their authorised dealer and standard warranty support should be sent from the e mail of the manufacturer to the email of Engineer-in-charge and hard copy of it to be submitted during execution of work /submission of bill.

If any refurbished material is supplied and installed penal action will be taken as per existing rules

Rate should include all taxes, other charges & L.W.C (if any). Work should be completed as and when required and as per the direction of the administration

Otis Elevator Company(India)Limited