REPAIR/ REPLACEMENT TO CGI SHEET AND OTHER MISC WORKS IN NOE AND CLEANING/ REPAIR OF WATER TANKS, GI/ CI INCLUDING OTHER CONNECTED B/R ITEMS FOR ZONE B UNDER AGE B/R-II AT BB CANTT SRINAGAR

Amount

Dismantling of plain or corrugated steel sheeting, any gauge thickness , including nanital or similar pattern roof covering complete all as specified and directed.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet (any pattern) 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F 0.63 mm thick galvanised, corrugated mild steel sheeting with two corrugation side lap, fixed with L type or J type or cranked hook bolt, in roof, wall etc with grade of zinc coating 275 complete all as specified and directed.

S&F 0.63 mm thick plain galvanised, mild steel sheeting in ridge, hips, valley gutters, drip and straight flashings (lengh and girth fixed) with grade of zink coating 275 complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed.

Taking down chowkat or frames with shutter (without taking off shutters from the frames) not exc 1.5 sqm each including cutting holes for taking out hold fasts or dismantling brick work/stone work (holes cut and any other damage to jambs walls for taking out hold fast shall be finished identical to existing finish without any extra cost to the govt) complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified and directed.

S&F 75mm Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed.

S&F 100 mm size extruded aluminium handles fabricated type, anodised all as specified and directed.

S&F 150 mm size aluminium anodised barrel tower bolts of extruded sections all as specified and directed.

Dismantling of timber scantlings 40 sq. cm and over in section, in any position unframed work complete all as specified and directed.

M&L for 2nd class hard wood clean sawn timber fixed in scantling complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified.

S&F 10-12 mm thick 1st class soft wood Australian wooden panelling fixed with toughened and grouted as wall panelling including fillets/cornices & 9 mm ply fixing on walls and applying two coast varnishing, polishing and preparation with sneezing, complete all as specified and directed.

S&F in repairs for wooden laminated flooring in strips of size 120 cm long and 20 cm wide and 6-8 mm thick, fixed with PVC sheet and cushion including fillets/cornices, laid over 12mm thick BWR plywood complete all as per manufracturer's instruction all as specified and directed.

S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre with hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified complete, all as specified and directed.

S&F for Gypsum board 12mm thickin ceiling fixed with screw as per manufacturers instructions complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails as in cupboard, drawers, showcase, cupboard shutters, wooden shelves, Partition, wooden flooring etc complete all as specified and directed.

S&F insulated PVC wall panels consisting of 5 mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site laid over suitable frame including necessary fillet/cornices etc. complete all as specified and directed. Note :(i) Disconnecting of electrical connections from main DB and removing all switch socket, sheet metal enclosures of all E/M nature (Fitting & Fixure). (ii) Connecting and refixing of all electrical connections from main DB and fixing of switch accessories such as switch socket,sheet metal enclosure of all E/M nature (Fitting &Fixture).

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles etc complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, straight or curved on plan exceeding 6 mtr mean radius, built in cement mortar 1:4 complete all as specified and directed.

Taking down cement plaster of any description, on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as directed.

M&L for rendering 15mm thick cement plaster in CM (1:4) on brick work or concrete surfaces finished even and fair complete all as specified and directed.

Dismantling PVC water tanks exc 250 litres and not exc 500 litres capacity etc complete all as specified and directed.

S&F 500 litres capacity rotational moulded polye-thylene water storage tanks, three layer, (cylindrical vertical with closed top) hoisted and fixed in position including brass float valve all as specified in SSR Part I complete all as specified and directed.

S&F in repair ball valve brass 20mm dia high pressure with polythene float and flynut, screwed for iron pipe or brass ferrule complete all as specified and directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs cleaning etc and hoisting if required reconnecting and refixing in position after cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc complete (capacity of tanks exc 250 ltr and n exc 500 ltrs) including writing " date of cleaning " and next due date in bold capital letters Exc 4 cm in height complete all as specified and directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs cleaning etc and hoisting if required reconnecting and refixing in position after cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc complete (capacity of tanks exc 500 ltr and n exc 1000 ltrs) including writing " date of cleaning " and next due date in bold capital letters Exc 4 cm in height complete all as specified and directed.

S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples etc complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and directed.

S&F sheet glass 4.00mm thick, ordinary quality and glazing with oil puitty, in square not exc 0.5 sqm in each pane completed, all as specified and directed.

Taking up or down 15mm dia steel tubing and connection, including cleaning for re-fixing or removal to store complete all as specified and directed.

Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, shelves, lintels, etc, and cutting chases for concealed water tubings or conduit wiring, etc and making good, cutting not exceeding 10cm girth complete all as specified and directed.

S&F 3-layer PP-R Polypropylne random copolymer concealed pipes of outer dia 20mm SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polyproplene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified and directed.

S&F in repairs 15mm bore stop valves or angle valve, fancy type chromium plated, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions etc complete all as specified and directed.

S&F in repairs bib tap cast copper alloy chromium plated fancy type long body with crutch or butterfly handle, screwed for iron pipe or for brass ferrule of bore 15mm complete all as specified and directed.

S&F in repair Vitreous china wash hand basin, white, flat back, of size 550 x 400mm with pedestal including 32mm dia CP brass waste coupling, 32mm dia PVC waste pipe, cast iron brackets and making good disturbed surfaces in cement mortar 1:3 or PCC 1:2:4 complete all as specied and directed.

S & F in repairs stainless steel sinks with drainage board made of stainles steel sheet 1.0 mm thick kitchin or laboratory with plugs washers and waste pipes, including bedding in cement mortor to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mmx 460mm bowl size 410mm x 330mm x 160mm. complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc. complete all as specified and directed.

M&L PVC (SWR) floor trap 75mm dia plain with grating including jointing with solvent cement complete all specified and directed.

S&F 75mm dia PVC (SWR) pipes including necessary fittings, single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F 110 mm dia PVC (SWR) pipes including necessary fittings, single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F in repair Toilet paper holder, chromium plated, heavy duty, fixed to wall with brass screw complete all as specified and as directed.

S&F in repairs 15mm bore Brass wall mixer with CP telephonic shower for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repairs 15mm bore Brass CP mixer for mixing hot & cold water (for WHB/Sink) screwed down for iron pipe and fixed complete all as specified and directed.

S&F brass tubular towel rail (finish Glossy), 20mm dia, D type, 60cm long between flanges fixed in repair, complete all as specified and as directed.

S&F in repairs three tier Corner Glass shelf of size 300 x 300 mm (Big) , 225 x 225 mm (medium) & 150 x 150 mm (small), complete all as specified and as directed.

S&F in repairs glass shelf assembly consisting of glass shelf, 60cm long and 12 cm wide with CP bracket and guard railing fixed in repair complete all as specified and directed.

S&F in repair PVC connections 450 mm long and 15mm dia with PTMT nuts and PVC washers on both ends, complete all as specified and as directed.

S&F in repair PVC connections 600 mm long and 15mm dia with PTMT nuts and PVC washers on both ends, complete all as specified and as directed.

S&F in repair Telephonic Shower rose, brass, chromium plated, 125mm dia with or without swivel joint, with & including CP brass arm and wall flange, fixing to steel pipe or union as in repair complete all as specified and directed.

S&F in repairs CP Soap dish, any type fixed to plug with chromium plated brass screws complete all as specified and as directed.

S&F in repair CP grating suitable for 75/100 mm bore floor trap and fixed with white cement, complete all as specified and directed.

S & F in repairs one piece Vitreous China wash down water closet pan with flush compact and PVC seat cover (closed pattern), connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, health faucet, jet spray etc complete all as specified and directed.

Demolition of cement concrete in ground floors and paving (unreinforeced) not exc 15cm thickness (below or above ground level) complete including removing the debris exc 1.5 km and nexc 5 km all as specified and as directed.

M&L for 60mm thick machine pressed precast concrete interlocking paver block any shape and size confirming to IS-15658-2006, M-35 with grey cement and pigment, filling the joints with sand complete all as specified and directed.

M&L for Sand cushing for laying interlocking paver blocks on footpath iincluding watering and consolidation completre all as specified and directed.

M&L for 50mm thick PCC (1:4:8), Type D-2 (using 40mm graded crushed stone aggregates) as in sub base or floors etc. complete all as specified and directed.

M&L for 40 mm thick PCC 1:2:4 type B-1(using 20 mm graded crushed stone aggregate) as in floor finished even and smooth with out using extra cement complete all as specified and directed.

S&F chequered cement concrete tiles with grey cement and pigment , rubber moulded with laquer polish for extra shine, size 300 mm x 300 mm x 22-25 mm thick, ISI marked, coloured, set jointed and pointed in neat cement slurry fixed over and including 20 mm thick screed bed in CM (1:6), complete all as specified and directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. Laid bedded in any mortar complete all as specified and directed.

M&L for 18-20mm thick Granite (of any type) in steps, jambs, pillars, window- cills, cooking platforms and like including 15mm thick in cement mortar (1:6) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite all as specified & directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) etc complete all as specified and directed.

M&L for Virified Ceramic tiles 10 mm thick (square/ rectangular) light shade, polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match fixed over and including 15mm thick screed bed in CM 1:6 complete all specified and directed.

M&L for Vitrifired ceramic tiles light shade 10mm thick, polished, in pieces of required width cut out of 600mm x 600mm size, in dado/skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including10 mm thick Screeding layer in cement mortar 1:4 complete aal as specified and directed.

M&L for coloured glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match fixed over and including 10mm thick backing coat in CM 1:4 complete all as specified and directed.

M&L for coloured non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match fixed over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

S&F in repair 20 mm dia decorative powder coated aluminium anodised drapry curtain rods of with bright finish,including decorative side domes, brackets and a minimum of 8 Nos curtain rings in per RM of length complete all as specified and directed.

M&L for Prepration of new plaster surfaces of wall nd applying two coats of cement based paint on wall surfaces complete all as specified and directed.

M&L for preparation of new steel surface exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M&L for preparation new wooden surface of any description not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc complete (capacity of tanks exc 250 ltr and n exc 500 ltrs) including writing " date of cleaning " and next due date in bold capital letters Exc 4 cm in height including dismantling of existing roof sheets and refixing the same after cleaning water tanks complete all as specified and directed.

Ditto all as per item No. 79.00 described here-in-before but capacity of tanks exc 500 ltr and n exc 1000 ltrs.

Dismantling PVC water tanks exc 500 litres and not exc 1000 litres capacity etc complete all as specified and directed.

S&F 1000 litres capacity rotational moulded polye-thylene water storage tanks, three layer, (cylindrical vertical with closed top) hoisted and fixed in position including brass float valve all as specified in SSR Part I complete all as specified and directed.

Removing old spun yarn lagging material from GI tubing any size including plaster of paris and removing away to a distance of 50m away from the bldgs complete all as specified and directed.

Lagging to pipes internal dia 15mm used in internal water supply or plumbing all round with, 25min thick bonded mineral wool preformed ‘SNAP ON ’pipe sections of density 144Kg/cum conforming to IS9842, provided with chicken mesh wire netting 25 gauge, 20mm mesh and POP on top surace including removing old legging complete all as specified and as directed.

Lagging to pipes internal dia 20mm used in internal water supply or plumbing all round with, 25min thick bonded mineral wool preformed ‘SNAP ON ’pipe sections of density 144Kg/cum conforming to IS9842, provided with chicken mesh wire netting 25 gauge, 20mm mesh and POP on top surace including removing old legging complete all as specified and as directed.

Taking up or down 20mm dia steel tubing and connection, including cleaning for re-fixing or removal to store complete all as specified and directed.

S&F 15 mm bore dia Tubes, 'medium grade' galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors, complete all as specified and directed.

S&F 20 mm bore dia Tubes, 'medium grade' galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors, complete all as specified and directed.

S&F 3-layer PP-R Polypropylne random copolymer concealed pipes of outer dia 16mm SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polyproplene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified and directed.

Demolition of cement concrete (unreinforeced) of any description and in any position not otherwise specifically provided for complete including removing the debris exc 1.5 km and nexc 5 km all as specified and as directed.

M&L for cement concrete (1:2:4) type B1 (using 20mm graded crushed stone aggregate) as in foundation filling and mass concrete, etc complete all as specified and as directed.

S&F 2mm thick linoleum sheet, plain coloured, laid dry in floors including stretching, cutting and fitting complete all as specified and as directed.

M&L for coloured non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match fixed over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

Dismantling of cast iron or reinforced concrete drain pipes, any size and any dia jointed in cement mortar and taking out of trenches, if required complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes including necessary fittings, single socketed in any length with rubber ring joints laid in trenches or laid in floor complete all as specified and directed.

S&F 75mm dia PVC (SWR) pipes including necessary fittings, single socketed in any length with rubber ring joints laid in trenches or laid in floor complete all as specified and directed.

S&F 110mm dia PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed.

S&F 75mm dia PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed.

S&F 110mm dia PVC (SWR) bends any radius complete all as specified and directed.

S&F 75mm dia PVC (SWR) bends any radius complete all as specified and directed.

S&F in repair Wash Hand Basin (Vanity) long patern type of 78 cm x 48 cm including all fittings with decorative cabinet with Door/ Shutter and 02 No drawers complete all as specified and directed.

S&F in repair Vitreous China wash down water closet one piece pan (Pedestal pattern), white/ coloured (including all fittings, fixing bolts, flushing cistern, jet spray and flush pipe) complete all as specified and directed. Make : Jaquar Cat part No - Lys-Wht-38851S300UFSMN or tecnocommercially equivalent in Kohler/ Neycer / Roca.

S&F in repais vitreous chine wash down water closet (pedestal pattern) white, complete including connection to drain pipe and to flushing pipe, anti-syphonage pipe etc, complete all as specified and directed.

S&F in repairs vitreous china squatting pan, Orissa pattern of size 580mm x 440mm white with including foot rests and including CI 'P' trap but excluding flushing cistern and flush pipe, including provision of PCC (1:4:8) type D2 bedding, complete all as specified and directed.

S&F in repairs PVC low level flushing cistern 10 Ltrs capacity, valveless, syphonic action type, white with inlet, ball valve, float and handle including brackets, PVC 32mm dia flushing pipe etc., complete all as specified and directed.

M&L for 75mm thick PCC (1:3:6) type C1 (using 20mm graded crushed stone aggregate) as in plinth protection, laid in panels of area not exceeding 2.00 sqm with 6mm wide joints filled with mastic (using bitumen and sand mixture applied hot in the ratio of 1:3 by weight) formed at the end of each panel and change in direction of plinth protection/ PCC path and pavings and finishing the top surface even and smooth without using extra cement complete all specified and as directed.

S&F in repair 15mm bore bib tap, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe, complete all as specified and directed.

S&F in replair 15mm bore stop valve, cast copper alloy, chromium plated, fancy type, without shank and cup concealed type, screwed both ends for iron pipe or for union, complete all as specified and directed.

M&L for 75mm thick PCC (1:4:8), type D2 (using 40mm graded crushed stone aggregate) as in sub base finished even and fair complete all as specified and directed.

M&L for Endura coloured tiles 300mm x 300mm x 10mm thick confirming to IS, laid in floors etc, set & jointed in neat cement mixed with pigment to match the shade of tiles over and including 20mm thick screed bed in cement mortar (1:4) complete all as specified and directed.

M/S PARVEZ AHMAD LONE

M/S SHIMAR STAR GLACIER

M/S NORTHERN ELECTRICAL WORKS

M/S BASHIR AHMAD MIR