SPECIAL REPAIR TO ROADS AT FD WKSP AREA, MT AREA AND MES YARD AT UDAIPUR MIL STATION UNDER AGE (I) UDAIPUR

Amount

Scarifying or picking graveled, macadam or bituminous macadam surface in area not exceeding 400sqm, exceeding 50mm deep and not exceeding 100mm deep and removing where directed by Engr-In-Charge complete all as specified and directed

M&L for preparing black top surfaces of roads by brushing with wire brush for removing cracked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc and applying evenly a tack coat with paving bitumen 80/100 (VG-10) grade at the rate of 5.0Kg per 10Sqm on black top surfaces complete all as specified and directed.

M&L for laying premixed bituminous macadam (using binder not less than 4% by weight of total mix) rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) using VG-30 paving bitumen, complete all as specified and as directed. Note: No extra payment will be made if binder is more than 4%.

M&L for preparing old bitumen rough surface by brushing with wire brushes for removing cracked mud etc., sweeping with booms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applying evenly a tack coat with bituminous primer at 5Kgs/10sqm and laying 40mm consolidated thick bituminous premix semi dense asphaltic concrete with 5.5% binder content by weight of total mix using VG-30 paving bitumen and laying with mechanical paver, mixed in hot mix plant, rolled and compacted to required camber or gradient using 8 to 12 ton power roller or Vibratory roller complete all as directed and specified. Note:- VG-30 paving bitumen content beyond 5.5% if required on account of design mix shall not be paid and shall be deemed to be included in unit quoted rate.

Repair to potholes not exceeding 1 .0sqm each, any depth exceeding 30mm, including sweeping free from dust & mud or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25mm in depth, making good by applying tack coat at 5.0kg per 10sqm. putting in premixed bituminous macadam, well rammed & sealed with binder 9.8kg per 10sqm, blinded with 0.09cum of stone chippings, 6.3mm size & again will rammed (including supply or premixed macadam, binder & chippings) complete all as specified and directed.

M&L for preparing black top surfaces by brushing with wire brushes for removing cracked mud etc., sweeping with booms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applying evenly a tack coat with bituminous primer at 5Kgs/10sqm and laying 30mm consolidated thick bituminous premix semi dense asphaltic concrete with 5.5% binder content by weight of total mix using VG-30 paving bitumen and laying with mechanical paver, mixed in hot mix plant, rolled and compacted to required camber or gradient using 8 to 12 ton power roller or Vibratory roller complete all as directed and specified. Note:- VG-30 paving bitumen content beyond 5.5% if required on account of design mix shall not be paid and shall be deemed to be included in unit quoted rate.

M&L for painting lines, dashes, arrows, letters etc on roads, pavements and the like exceeding 10cm wide with retro reflective Thermoplastic road marking Paint (white or golden yellow colour) by hot mixing method as per IS specifications, heating with gas, to achieve minimum uniform thickness 1.5mm using painting materials @ 6.50kg/sqm and glass beads @250gm/sqm complete all as specified and directed.

S&F in repair duel (62 beads minimum) cat eye alluminium casted body of size 100mm x 100mm x 20mm having ABS plastic strips containing 62 mini retro reflective glass beads of colour white/red/yellow on both sides (minimum 31 beads on each side) fixed with steel zinc plated nails/studs of 12mm dia 120mm long complete all as specified and directed

S&F in repair solar cat eyes (studs) made of aluminum dicasted body, 100% water proofing design according to 65, both side reflectors of size 125mm x 125mm x 25mm (shank not less than 66mm), of high efficiency mono crystalline solar panel 2.5V/ 0.3 watt one Ni-Mh or Ni-ed rechargeable battery (1.2V/ 1600MA) consisting of six super bright LED with 10,000 to 18,000 mcd, view distance upto 1000 meters and flush road bearing capacity 10 MT, fixed in road by drilling hole and epoxy hardener etc, as per manufactures instructions complete all as specified and directed

S&F in repair road safety poly carbonate convex traffic Mirror 100cm mm dia encased in ABS materials, orange colour for outdoor installations including 3.0m long and 75mm dia MS pipe as stand, fixed to ABS frame with proper fixing arrangements, stand painted with two coats of synthetic enamel paint over one coat of red oxide primer fixed in ground with 45cm x45cm x50 cm PCC block with cement concrete 1:2:4 type B1 using 20mm graded stone aggregate and including necessary form work, earth work excavation, removal of excess soil to a distance not exceeding 50m etc., complete all as specified and directed.

S&F in repair rubber speed bump 50mm height made of high quality rubber materials load resistance, pre coloured (Black and yellow), bump studded with reflectors on either side 350x250mm fixed with epoxy and bolts by drilling 6mm x75mm dia fasteners, bottom of bumps to be filled with cement concrete 1:1.5:3 type A1 using 12.5mm graded stone aggregate and cured, complete all as per manufacturer's instructions, specified and directed.

S&F in repair Warning/Mandatory sign board, Triangular of area not less than 0.05 Sqm, mounted on MS angle iron of size 65x65x6mm and 3.0m long poles with high strength bolts and nuts including necessary excavation, PCC 1;2;4 type B1 using 20mm graded stone aggregate foundation filling and removing soil etc complete all as specified and directed.

S&F in repair metal tubular delineator made out of ABS round body fitted with 2 Nos of 100mm dia highly reflective reflectors made of PMMA and mounted on 50mm dia MS Pipe medium weight of 600mm height, duly powdered coated and thermoplastic clastomer 3 bands of green, red and yellow reflector, radium tape of 25mm wide strips with anti theft metal net for reflector protection, including embedded in PCC 1:2:4, type B1 using 20mm graded stone aggregate foundation of size 150 x 150 x 300mm complete all as specified and directed

shree nathji trading corporation

Punjab Traders