Design and Beautification work of Saraswati garden in Sector-16B, Greater Noida.

Civil work: Excavation in foundation in ordinary soil (Loam clay or sand) including lift upto 1.50 M and lead upto 30.00M and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the engineer incharge upto a distance of 30m from the foundation trenches (where machine con not reach/move) (SOR/251 (A)/4.1.1)

Sand filling in plinth including supply of necessary quantitiy of sand from a distance not exceeding 8Kms from the site of work and including watering, dressing etc. labour and T & P etc. (SOR-20/255)

Cement concrete with 4cm gauge Approved stone ballast coarse sand & cement in the proportion of 8:4:1 including supply of all materials labour tools & Plants etc required for proper completion of the work

8:4:1 (1 Cement 4: Coarse sand :8 graded stone aggregate 40mm nominal size) (SOR-20/281/5.08)

Steel reinforcement for RCC work including straightening cutting bending placing in position and binding all complete upto plinth level

Thermo Mechanically treated bars of grade Fe-500D or more. (SAIL Steel) (DSR-18/5.22.6/AR)

Plain/Reinforced Cement concrete in open foundation complete as per Drawing and Technical Specifications. (MORTH-20/9.06/E/Case-II)

RCC Grade M-25 using batching plant transit mixture and manual placing (MORTH-20/9.06/E/Case-II)

M-150 brick work in 1:6 cement & fine sand 1.25 FM mortar in foundation and plinth including supply of all material labour and T&P etc required for proper completion of the work. (SOR-20/303) same as item no 303 but in 1:4 one cement & four fine sand of 1.25 F.M. mortar. (SOR-20/305) Same as item no 305 but in 1:4 one cement & four coarse sand of 2.20 F.M. mortar. (SOR-20/305(A))

12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) (DSR-18/13.4.2)

40 mm thick rubbed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) with joints 3 mm thick, side buttered with cement mortar 1:2 (1 cement : 2 stone dust) admixed with pigment to match the shade of stone and pointing with same mortar. (DSR-18/11.30)

Red sand stone (DSR-18/11.30.1)

White sand stone (DSR-18/11.30.2)

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : (DSR-18/11.55)

Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. (DSR-18/11.55.1)

Extra for pre finished nosing to treads of steps of marble stone. (DSR-18/11.24)

Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab. (DSR-18/11.31)

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. (DSR-18/10.16)

Hot finished seamless type tubes (DSR-18/10.16.2)

Providing and fixing CNC cut perforated Corten steelsheet (1.6 mm thick) for canopy roofing including cutting, hoisting, fixing in position, including welding and bolted with special shaped washers etc. complete (AR/GNIDA)

Providing and fixing lotus sculpture of size (8m dia, 6m height) in corten steelsheet (2.0 mm thick) at canopy roof top including art work, cutting, hoisting, fixing in position, including welding and bolted etc. complete (AR/GNIDA)

Providing Materials: Corten steel sheet (2.0mm thick) (AR/GNIDA)

JOB work: Artist and artistic team, Fabrication, cutting, forming, assembling, welding, erection, equipments (Labour, crane/welding, machine/generator/cutter etc) Generate lotus floral shape. (AR/GNIDA)

Providing and fixing structural steel frame (for dry cladding with 30 mm thick gang saw cut with machine cut edges sand stone) on walls at all heights using M.S. square/ rectangular tube in the required pattern as per architectural drawing, including cost of cutting, bending, welding etc. The frame work shall be fixed to the wall with the help of M.S. brackets/ lugs of angle iron/ flats etc. which shall be welded to the frame and embedded in brick wall with cement concrete block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) of size 300x230x300 mm, including cost of necessary centring and shuttering and with approved expansion hold fasteners on CC/RCC surface, including drilling necessary holes. Approved cramps/ pins etc. shall be welded to the frame work to support stone cladding, the steel work will be given a priming coat of Zinc primer as approved by Engineer-in- charge and painted with two or more coats of epoxy paint (Shop drawings shall be submitted by the contractor to the Engineer-in-charge for approval before execution). The frame work shall be fixed in true horizontal & vertical lines/planes. (Only structural steel frame work shall be measured for the purpose of payment, stainless steel cramps shall be paid for separately and nothing extra shall be paid). (DSR-18/8.21)

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc. complete. (DSR-18/13.52)

Providing and Applying clear coat on corten steel sheet after naturally gain suitable color & shade: (AR/GNIDA)

Providing and fixing mild steel round holding down bolts with nuts and washer plates complete. (DSR-18/10.19)

Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 25 meter height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia M.S. tube, placed 1.5 meter center to center, horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S. tube challis, M.S. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc., wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of Engineer-in-charge. (DSR-18/24.2)

Design, supply, fabrication and installation of an artistic Veena-shaped sculpture (concept from "maa Sarasvati" veena) of approximate size 6.5m (length), comprising a mild steel framework made of hollow sections/plates with proper welding, grinding and stiffeners, externally clad with corten steel sheets of 2.0mm thickness, including ornamental detailing such as strings, frets, tuning knobs and decorative engravings as per approved design with complete anti-rust treatment of internal MS framework and application of protective coating on exposed surfaces, finishing with golden decorative paint wherever required, installation with base plates and anchor bolts (excluding RCC foundation/pedestal and main truss structure) and including transportation, labour, tools and all other accessories required for proper completion complete in all respects as per drawing and direction of Engineer-in-charge (AR/GNIDA)

Design and supply of Artistic book-themed bench 1500mm length for outdoor sitting, metallic framed internal support structure, GRC/FRP base shaped like book pages, wooden planks for seating and backrest, finishing etc. complete as per design in the direction of Architect. as per design (AR/GNIDA)

Providing Dustbin set of 3 capacity 80 Liters, size- 400X400 top : 300X300, Bottom : 900MM HT with MS powder coated stand size 4.5X1.5X750mm. Disposing debris (AR/GNIDA)

Electrical work: Supply laying of aluminium conductor PVC insulated armoured served sheated cables 1100 Volts grade at a depth of 750mm thick sand all around and protected with burnt bricks on ss and on top. On surface the cable run shall ixed on M.S. clamps etc. of suitable size or as directed by the Engineer-incharge, comple all respect. The rmouring of the cable shall be properly Connected wthhuctor by clamps etc. (SOR-18/501)

16Sq. mm 4 core (SOR-18/501(i))

35sq. Mm 3-1/2 core (SOR-18/501(k))

Supply and fixing of plain or pin type copper tin plated cable socket (lug) to the cable leads, insulating with tape and making connection etc. completion in all respect as per direction of the Engineer-incharge

35sq.mm (SOR-18/504/d)

16sq.mm (SOR-18/504/f)

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. (DSR-18/1.14)

2 X 4 sq. mm + 1 X 4 sq. mm earth wire (DSR-18/1.14.3)

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. (DSR-18/5.2)

Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required. (DSR-18/5.11)

Supplying,installation,testing and commissioning of Astronomical time switch of following configuration to be mounted in feeder pillars / Lighting DBs for automatic switching On & OFF of street lights at sun set & sun rise or twilight(Auto ON, Auto OFF, Auto modes) with manual override facility with 12/24 hour display format with suitable battery and indication for relay status i/c programming at site complete as required.(DSR-15/15.4)

2 output per phase and suitable for single phase supply (DSR-18/15.4.2)

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. (DSR-18/1.10)

Single pole and neutral (DSR-18/2.10.2)

Supplying and fixing different types of light fixtures at different locations.

Spike light 18 watt (AR/GNIDA)

Foot light 3 watt (AR/GNIDA)

Labour cess and GST will be paid extra as per Govt. orders.