Renovation of Adhi Arunachaleswarar Tirukkoil

Amount

Providing Scaffolding for Vimanam,RajaGopuram with Casurina Post non Flameable where ever necessesary for Main Form Work and byProviding Coconut Keeth as covering the Areas and Platform for Inspection etc all complete.

a.) Gopuram Height Upto 75"-0"

b.)Height upto 15"-0"

C.) Height Upto 25"-0"

Dismantling,Clearing One Course of Pressed Tile Roof and Weathering Course Labour charges only etc complete -W- 0037

Dismantling,Clearing and removing away carefully the damaged Cement Concrete labour charges etc complete -W-0034

Dismantling,Clearing and Removing away carefully the Doors and Windows including removal of frames, hinges and fastening etc complete -W-0029

Earth work excation and depositing on bank with initial lead and lift in all classes of soil such as Hard Gravelly soil,murram stoney earth etc complete.

Cement Concrete 1:4:8 mix using 40mm hbg metal including ,cost,conveyance of all materiales and labour charges etc complete.

Cement Concrete 1:2:4 mix using 20mm hbg metal includingcost,conveyance of all materiales and labour charges etc complete.

Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the cutstone slab in a single layer of required slope and finished by beating the lime concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers.

Finishing the top of roof with 50 % New Tiles One course of Machine Pressed tiles of size 230mm x 230mm x 20mm of approved qualityand 50 % Old Pressed Tiles set in Lime mortar 1:1.5 (One Lime, One and Half of Five Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers

Scraping the Old Plastering Surface of Vimanams carefully including Isolated Bricks or Brick Work without damaging the Vari Vargams, racking out the joints ,Cleaning the Surfaces with Water including all working Heights ,Hire charges for Special Tools, Brushes etc complete.

Restoration by Providing Herbal Water Wash ( Combination of Venthayam Poder 20% ,Siyakai Powder 10%,Arapu Powder 5%, Boonthi Kottai Powder 50% ,Arugampul Powder 3%,Naanari Ver Powder 3% ,Vetti Ver Poder 3% ,Korai Kizhangu Powder 3% and Sembarathui Leaf Powder ,Total 100 % ) are used for removal of Lime wash on Stone and Oil Smudge ) and approrimats methodology to restore the Originalities of the exiting Granite Structure inclusive of Hire charges,Scaffolding arrangements ,conveyance charges for tools and Plants and machinaries to the worksite and cleaning te site after completion of work etc complete.

Pointing the Stone Joints with Lime Mortar 1:1.5 ( One Pollachi Lime and One and Half Sand ) including cost and conveyance of all materiales and labour charges etc complete.

Painting with Panchavarnam by using Best Quality of Exterior Emulsion for Vimanams,Gopuram including cost and conveyance of all materiales and labour charges such as Artist Painter ,Workingin Heights, Lifting of materiales,cost of Brushes etc complete

a.)Upto 50"-0"

b.)Upto 25"-0"

c.) Upto 15"-0"

Painting Two Coats over Old Wood work including cost of all materiales and labour charges etc complete

Painting Two Coats over Old Iron work including cost of all materiales and labour charges etc complete

Painting Two Coats over New Iron work including cost of all materiales and labour charges etc complete

Applying Stone Pre Servative using Varnish including cost of all materiales and labour charges etc complete.

Painting Two coats with Exterior Emulsion with one Primer coat including cost of all materiales and labour charges etc complete.

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire)

Providing Pre Caste Concrete Cover Slab using M20 Gr Concrete of the following sizes including cost of all materiales but excluding cost of Steel and Fabrication) and labour cvharges etc complete.

Supply and fixing of Grill Gate of the following size including cost conveyance of all materiales and labour charges etc complete.

Providing and fixing of S.S.grating 300x200 mm size with S.S.Flats of 25x10mm of outer frames, 20x10 mm of inner braces with mild steel grating and fixing them in position

GeoPhysical Investigation Charges for carrying out New Bore Well etc,complete - L- 0092

Drilling of 150mm Dia Bore Well in Hard Rock Area using DTH Rig including cost ,transportation charges for rig and other supporting vechicle etc complete .

a.) Supply and Delivery of 160mm Casing Pipe to site etc complete.WD -M0027

b) 160mm End Cap WD-M0115

Labour Charges for Inserting the Casing Pipe including cost and conveyance of all materiales and labour charges etc complete.

Supply of Submersible Motor for 150 dia Bore well without Panel Board 125 lpm x 125 m Head WD -M1654

Supply and Delivery of Three Phase Panel Board with Two Level Guard and Auto Starter for 7.50 HP WD-M1915

Supply and Delivery of 2.50 Sq mm PVC .insulated and sheathed Three Core Flat Type Copper Gable confirming to IS 694/1990 with ISI mark .WD-M1974

Supply and Delivery of KIOSK of size 0.75m x 0.45m x 0.75m made up of MS Angle of size 50mm x 50mm x 4mm alround covered with 16 Gauge MS Sheet and kiosk Door made up of MS Plates of size 25 mm x 3 mm including cutting ,welding,Grinding,Locking arrangements and labour charges etc .WD-M1471

Painting with Panchavarnam by using Best Quality of Exterior Emulsion for Vimanams,Gopuram including cost and conveyance of all materiales and labour charges such as Artist Painter ,Workingin Heights, Lifting of materiales,cost of Brushes etc complete

a.) 50 mm GM Non Return Valve -WD M0619

b.) 50 mm GM Gate Valve L-0092

c.) 50mm Flange Set WD-M0597

d.) 50mm Dia GI Pipe WD-MD489

e.) 50mm Dia UPVC Column Pipe for Downward Extention of Pump -WD-M0051

f.) 50 mm GI Coupling -WD- M0596

g.) 50 mm GI Bend .WD-M0602

h.) 50mm GI Union WD-M0603

i.) 50 mm MS Clamp set .WD-M0617

j.) 32 AmpsPorcelean Fuse Unit(500 V ) M-1392

Labou Charges for Errection of Supplied Submersible Pump Set in Deep Bore Well including connection of Submerssible gable and allother necessary materiales etc complete.

Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling and switch drop portion PVC rigid pipe concealed in wall with PVC accessories with Module GI switch box in flush wall with 6A one way module switch with module front plate with painting of Suitable colour for Open PVC Light point / fan point (for electronic regulator) ( 5 points / Coil) Higher End (Data-A1)SD-276

Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling and switch drop portion PVC rigid pipe concealed in wall with PVC accessories with Module GI switch box in flush wall with 6A one way module switch with module front plate with painting of Suitable colour for Open PVC Light point / fan point (for electronic regulator) ( 6 points / Coil) Higher End (Data A2)SD-278

Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC Rigid pipe on wall and ceiling and switch drop portion PVC rigid pipe concealed in wall with PVC accessories with suitable Module GI switch box in flush with wall with 1 no. 6A one way module switch and 1 no. 6A 3/2 pin module socket with module front plate with painting of Suitable colour with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire for Open PVC conduit Plug point ( 8 points / Coil) Higher End (SD311)

Supply and fixing of 4' 20W LED fitting with LED on wall or ceiling with PVC unsheathed copper leads from terminals to the fitting (Higher end) (Data A 3)

supply and fixing of 1200mm (48") sweep AC ceiling fan complete ( Higher end) with 2 module 100W fan step regulator (Higher end) with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18")(SD106)

Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade insuitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 14 SWG TC wire with painting ofsuitable colour (SD 59)

Supply and fixing of 3nos.6A two module 5 pin socket , 3 nos. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End( SD 389)

Supply and fixing of 50W LED flood warm white light fitting on ceiling with PVC unsheathed copper leads from terminals to the fitting (Higer End) (Data A4)on Service 32mmm GI Pipe

Supply and fixing of 120 W LED Flood Warm White lLght Fitting on ceiling with PVC unsheathed copper leads from terminals to the fitting (Higer End) (Data A 5) SD -451

Supply and fixing of 450mm (18") sweep (light duty) AC dxhaust fan complete without provision of hole in the wall) (Sd 119)

Supply and fixing of 1 no.6/16A two Module Socket , 1 no. 16A one Module Switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End(SD 401)

Supply and fixing of 32A DP MCB with sheet steel enclosure in flush wall with earth connection (Higher end) (Data A 7 )

Supply and fixing of 12 way Single Pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 10 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End (SD 526)

Supply and fixing of 6 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB switch as incoming and 3 nos 32A 3P MCB,9Nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End (Data A 8)

Supply and clarnping of 4 x 10 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps(SD 198)

Supply and fixing of Brass GAble Gland for 4 x 10 sq.mm. PVC LTUG armoured cable with earth connection (SD 163)

Supply and providing cable end termination of 4 x 10 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete(SD 213)

Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection (SD 371.)

Earthing as per PWD standard with an earth electrode of 2 metre Class 'B' GI pipe of dia not less than 32mm complete with necessary masonry work(SD 212)

supply and installation of 32 watts Wall Mounted Speaker ( Higher end) with suitable supports with connections (Data A 9)

Supply and Installation of 500W PA Mixer Amplifier (Higher end)(Data A 10)( 16 Channel )

Supply and Installation of 12U Wall Rack(Higher End)(Data A11)

Supply and Installation of Cordless Mic UHF(Higher End) (M 2156)

Supply and Run of 2 core 1.5 sq.mm shielded copper speaker wire in sutiable PVC rigid pipe on wall or on ceiling with connection. (Data A 12)

Supply and fixing of Louvers Shutters Arangements for 450mm (18") Sweep (light duty) AC Exhaust fan (SD 123)

supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no.32 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting .(SD 448)

supply and fixing of 24W LED 2x2 square type Recessed fitting with LED (Higher end) on false Ceiling with suitable hanging support from ceiling with PVC unsheathed copper leads from terminals to the fitting (SD 439)

supply and fixing of 18W LED square type Recessed fitting with LED (Higher end) on false Ceiling with suitable hanging support from ceiling with PVC unsheathed copper leads from terminals to the fitting.(SD 441 )

Supply and fixing of WT bulk head fitting with guard suitable for 15 W LED Bulb (Sd 83)

Supply and fixing of 40W Glass LED fitting with LED on wall or ceiling with PVC unsheathed copper leads from terminals to the fitting (Higher end) (Data A 80)

Supply and fixing of 15W LED tyrack fitting with LED on wall or ceiling with PVC unsheathed copper leads from terminals to the fitting (Higher end) (Data A 15)

Supply and fixing of 7.5W LED Gate light on existing pole top with PVC unsheathed copper leads from terminals to the fitting (Higher end) (Data A 16)

Design, Supply , Testing and commissioning of 10 Meters Mini mast lighting unit Bajaj Philips make of ISI equivalent complete with hot dip galvinized and suitable for 45 Met/sec wind Velocily and above. The Mini mast structure should have hend hence. Single ring and provided with galvanized lantern carriage suitable for and with 6 Nos of 150W LED Luminaries with manual ladder arrangement with safety Rung &feeder pillar Box with Automatic timer system including wiring etc, complete as specified in the relevant ISS. (Approved by PWD) (Data- A17)

Erection of the High Mast by providing Concreting 1:2:4 Mix R.C.C masonary foundation pedestal. The RCC pedestal projection should be 30 cms above the ground level. The feeder pillar box should also be mounted in RCC pedestal with projection of 30 cms above the ground level & foundation suitable to the safe bearing capacity of the soil at 12T /M2 at 1.5m depth of below ground level and necessary galvanized foundation bolts nuts washers and Anchor plate & Tmeplate etc. complete as per standard specification of IS -875-1987. (Approved by PWD)

S J INFRA (BID ID -1230563)