Electrical Provision for Providing Fire NOC for Old Age Home at Kanti Nagar, Delhi.

Supplying, installation, testing and commissioning of Electric driven Main Fire Pump suitable for automatic operation and consisting of following, complete in all respects, as required : a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. b) Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. c) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. d) Suitable cement concrete foundation duly plastered with anti vibration pads. 2280 lpm at 56 m Head

Supplying, installation, testing and commissioning of Diesel engine driven main fire pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Diesel Driven Pump) Horizontal type, multistage, centrifugal pump of cast of iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust pipe extended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required. M.S fabricated, common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered and with anti vibration pads. 2280 lpm at 56 m Head

Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump) Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS : 1520. Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS : 325. M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered and with anti vibration pads. 180 lpm at 56 m Head

Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :

25 mm dia

32 mm dia

40 mm dia

50 mm dia

80 mm dia

100 mm dia

150 mm dia

200 mm dia (wall thickness 6.3 mm)

Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/Class -II of IS: 3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required.

150 mm. Dia

Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia instantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal/Stainless Steel cap and chain as required :

Single headed Stainless steel

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :

80 mm dia

100 mm dia

150 mm dia

Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/ gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required.

150mm dia

Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange

150mm dia

100 mm dia

Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :

100mm dia

150 mm dia

Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required.

Providing fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories :

Pendent Sprinkler

Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required.

Providing & fixing flow switch in following sizes M.S. pipe including connection etc. as required. 100mm dia

Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required: Stainless Steel (Grade 304)

Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. (a) 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 (b) 20 mm nominal internal dia gun metal globe valve & nozzle. (c) Drum and brackets for fixing the equipmets on wall. (d) Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket. a) 30 M

Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required.

Stainless Steel (Grade 304)

Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg /cm2 complete as required.

Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required: 4 way - 150 mm dia M.S. Pipe

Providing and fixing weather proof lockable cabinet of size not less than size 750mm x 600mm x 250mm made out of MS sheet of 1.6 mm thickness having central opening and 4 mm thick glazed glass doors (Two nos.) suitably marked on the outside with the letters "FIRE HOSE" including necessary locking arrangement and shall be painted with duly painted with one coat of primer and 2 coats of synthetic enamel paint of post office red externally and white internally.The cabinet shall be suitable to accommodate 2 nos. 15 mtr long Hose pipe & 1 No branch pipe nozzle etc. complete as required.

Providing and fixing of photoluminescent signages of various matters/sizes in Aluminium sheet of 3mm thick with super extra glow based AUTOGLOW in-dark rigid sheet with high intensity luminous properties in a weatherproof UV stabilized coated aluminium sheet with UV screen printed by imported inks. Thickness 3 mm (+/-10%) service temp. -40c to +120c, visible up to more than 24hrs in total dark fungistatic, non-radioactive, contain no lead or phosphorous, no health or environmental problem, non-flammable, fixed on wall/ suspended with SS chain link complete as required. (matters & size as approved by Engineer-in-charge).

Single Sided

Double Sided

Providing and supplying arrow type signage/name board made of ACP (Aluminium Composite Panel) 3 mm thick sheet of approved colour and make, cut to required shape and size i/c surface preparation and application of self-adhesive vinyl /printed sticker lettering in English of approved colour and make etc. complete and all as per direction of Engineer-in-Charge.

Supplying & making end termination with brass compression gland and aluminium lugs for following sizes PVC Insulated & PVC sheathed XLPE aluminium conductor cable of 1.1 KV grade as required.

3 x 10 sq. mm (22 mm)

3 x 35 sq. mm (28mm)

3.5 x 25 sq. mm (28mm)

3.5 x 50 sq. mm (32mm)

Supplying & laying of following sizes XLPE (cross linked polyethylene) insulated PVC sheathed, armoured with galvanised steel strip/galvanized round steel wire U.G. Cable with suitable for rated voltage of 1.1 KV grade and conforming to IS:7098 (Part-1) & having ISI marking as required.

3 x 35 sq.mm (Aluminium) on surface

6 x 2.5 sq. mm (copper) on surface

3 x 6 sq. mm (Aluminium) on surface

4 x 6 sq. mm (copper) on cable tray

Providing & fixing of 0.5 HP Priming Pump including connection & testing etc complete as required.

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 Meter long etc. with charcoal/ coke and salt as required.

Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required.

Supplying & laying of 2x1.5 sqmm fire survival armoured cable, 600/1000V rated with annealed copper conductor having glass mica fire barrier tape covered by an extruded layer of Cross Linkable Ethylene Propylene Rubber (EPR) insulation and LSZH inner bedding, steel wire armouring & LSZH outer sheath complete as required.

LIFT PRESSURITATION SYSTEM

Supply, installation, testing & commissioning of Tube Axial fan confirming to IS-3588 (revised) complete with tube casing in MS/GI standard construction epoxy painted, impeller with adjustable blade angles, bird screen, gravity louvers, fire retardent double fold moisture and fire proof with flame retardent fabric confirming to IS-206 (revised) fire retardent flexible connection, necessary nut bolts and directly coupled TEFC Sq. cage induction motor (F-class insulation & B-class Temp. rise) suitable for 415V±10%, 50 Hz, 3 Phase electric supply complete with required hardware, suitable starter panel with cabling between panel and fans etc. Static Pressure: 50 – 75 Pa Fan Type: Axial pressurization fan Power Supply: 415V, 3 Phase, 50 Hz Motor Protection: IP55 / F Class Motor Protection: IP55 / F Class Noise Level: ≤ 75 dB at 3 mtr. distance Airflow: 9000-10000 CFM RPM 1440 (or lower depending on capacity) (AMCA certified for air and sound performance)

Supply and installation of 22Gauge GI ducting from fan to lift shaft including supports.

Supply and installation of Vibration isolators /spring mounts for fan.

Supply and Installation of Electrical panel Electrical Panels for Smoke Evacuation System with Potential free contacts for Fire signal and complete with A meter, Volt meter etc. as per Electrical Specifications. As per drawings and design supplied by architect and instruction given by authority and E.I.C Incoming- 100 Amp Outgoing 5 KW X 02 Nos. Starters for Exhaust fan (all Working in case of Fire on receipt of Fire Signal through potential free contact). Exhaust air fan and feeder for PLC Panel complete with protection MCB's and other required accessories etc. as reqd.

Supply & laying of XLPE armoured copper conductor twisted shielded control cables 3C X 1.5 Sq.mm twisted shielded cables for controlling fire panel to PLC panel.

Supply and Installation of PVC insulated FRLS Copper Flexible Wire - 2.5 Sq.mm for earthing.

Supply and installation of MS base frame form mounting the Fan Rectangular frame with cross bracing ISA 50×50×6 mm angles complete with pcc and other required material