Annual Maintenance Contract for electrical works, Operation and Maintenance of pumps, D. G. Set in housing complexes of CSIR-NML (2021)

Amount

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq. mm. FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 mm² FRLS PVC insulated copper conductor single core cable etc, as required: Group ‘C’.

Supplying & fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same (plastering & levelling with wall putty/paint) in case of recessed conduit, as required:

Supply and drawing following sizes of FRLS PVC insulated copper conductor single core cable in the existing surface/ recessed steel/ heavy gauge PVC conduit/ casing capping etc, as required:

Supplying and fixing metal box (heavy duty) of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc, as required.

100mm x 100mm x 60mm deep

180mm x 100mm x 60mm deep

200mm x 150mm x 60mm deep

200mm x 250mm x 60mm deep

Supplying and fixing following size/modules GI box along with modular base and cover plate for modular switches in recess etc, as required.

1 or 2 Module (75mm x 75mm)

4 Module (125mm x 75mm)

6 Module (200mm x 75mm)

8 Module (125mm x 125mm)

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate, as required.

Supply & fixing following Piano type switch/ socket on the existing switch box/ cover including connections etc, as required:

1 way 5/6 amps

1 way 15/16 amps

5 Pins Socket 5/6 amps

6 Pins 15/16 amps socket

Bell push switch

Supply & Fixing

Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc, as required.

Supplying and fixing brass batten/ angle holder including connection etc, as required.

Supply & fixing modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc, as required:

1 way 5/6 amps

1 way 15/16 amps

5 Pins Socket 5/6 amps

6 Pins 15/16 amps socket

Supply and fixing call bell/buzzer suitable for single phase 230V complete, as required.

Fixing of Exhaust fan accessories

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.

Making hole for installation of exhaust fan of size upto 450mm sweep by demolishing brick work manually/ by mechanical means including disposal of malba within 50 Meters lead and making good the wall by plastering (& levelling with wall putty/paint) etc, as required.

Supply and fixing 5 amps to 32 amps. rating 240/415 volts, ‘C’ curve miniature circuit breaker, 10KA (minimum) breaking capacity, suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc, as required.

Single pole

Single pole and neutral

Supply and fixing single pole blanking plate in the existing MCB D.B. complete etc, as required.

Supply and fixing following rating, double pole, 240V isolator in the existing MCB D.B. complete with connections, testing and commissioning etc, as required.

Supply and fixing following rating four poles 415V Isolator in the existing MCB D.B. Complete with connections, testing and commissioning etc, as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc, as required. (But without MCB/RCCB/Isolator):

6 way, Double door

8 way, Double door

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of following sizes direct in ground including excavation, sand cushioning, protective covering (common burnt clay FPS bricks) and refilling the trench etc, as required:

Upto 35 mm²

Above 35 mm² and up to 95 mm²

Providing, laying & fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collors, jointing with cement mortor 1:2 (1 cement: 2 sand) including trenching (75cm deep) & refilling etc, as required: 100mm dia

Laying and fixing of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 K V grade of following sizes on wall surface, as required:

Upto 35 mm² (clamped with 1mm thick saddle)

Above 35 mm² and up to 95 mm² (clamped with 25 x 3mm MS flat clamp)

Erection & Cable Joint

Erection of metallic pole of above 4.5 Meter and upto 6.5 Meter length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size) foundation with cement concrete collar of size 0.4m dia.x0.5m height to accomodate the looping type cable end box, including excavation and refilling etc, as required.

Supplying & embedding 32mm dia GI pipe (medium class) in pole collar/foundation (during casting) for cable entry including bending the pipe to the required shape complete, (including clamp, nut etc) as required.

Lettering & Painting

Lettering with black Japan paint of approved brand and manufacture, as required.

Painting with aluminium paint (Two or more coats) of approved brand and manufacture to give an even shade

Supplying, installation, testing and commissioning of Astronomical time switch (timer) capable of following output in fider pillars / Lighting DBs for automatic switching ON & OFF of street lights at sun set & sun rise or twilight (Auto ON, Auto OFF, Auto) with manual override facilty with 12/24 hour display format with suitable battery and indication for relay status i/c programming at site complete, as required: 1 output per phase and suitable for single phase supply.

Supply of 1.1KV grade, PVC insulated and PVC sheathed heavy duty/XLPE (armoured) aluminium conductor cables conforming to IS:1554 (Part-1) of following sizes etc, as required:

GI wire & Flexible copper cable

Providing and fixing 8 SWG/4mm. dia G.I. wire on surface or in recess along with PVCA cable/ for loop earthing including soldering etc., as required.

Supply of 1.1KV grade, PVC insulated and PVC sheathed Copper multistrand conductor flexible cables conforming to IS:694 of following sizes etc, as required:

3c x 1.5 mm²(Make: Mescab,Havells, Finolex)

Supplying and making end termination with brass compression gland & heavy duty LONG BARREL copper lugs for the following size of PVC insulated and PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grades, as required:

3½ or 4 x 16mm²

3½ or 4 x 25 mm²

3½ or 4 x 50 mm²

Supply and fixing 63 amps. Rating 240/415 V ‘C’ curve MCB , 10KA (minimum) breaking capacity, of following poles in the existing MCB DB complete with connections, testing and commissioning etc, as required:

Single pole and neutral

Triple pole

Triple pole and neutral

Supply of following rating, breaking capacity and pole MCCB, with spreader Terminal Kit (2 side) as required.

125A, (AC 415V) 4P with 25KA (minimum) breaking capacity, Fixed Thermal & Fixed Magnetic

250A, MCCB, FP, 26KA.(minimum) Adjustable Thermal & Fixed Magnetic setting

Supply of lights & accessories

Supply of Linear(4ft.) LED light fixture of 20w or above in extruded aluminium housing with all related accessories, integrated driver etc. with minimum system efficacy of 100 lm/watt. The operating CCT shall be minimum 6500K & 50,000 Hrs LED Life. Make:Wipro Cat No.: LL20-281-XXX-65AL1 or its equivalent.

Supply of LED tube light fixture (garnet type), standalone industrial type, including accessories: 2ft., 20 Watt, Make :Havells, Model/Item Code: LHEXARP7IN1W020 LED (Pride Plus Spectra) or its equivalent; as required

Supply of sheet steel enclosure fitted with din rail, as required, for:

SPN MCB

TPN MCB

Supply of ceiling fan complete with standard down rod etc, as required.

1200 mm sweep Make: Crompton Model: High Speed or equivalent; as required

1400 mm sweep Make: Crompton Model: High Speed or equivalent; as required

Supply of piano/modular electronic ceiling fan regulator as required.

Supply of Heavy Duty(Metallic body) Exhaust fan up to 300mm sweep Make:CG or its equivalent (including all accessories); as required

Maintenance of fans (It includes all material & manpower for removing & refitting at site etc. as required)

Supply of Metal Body oil filled capacitor (universal make or equivalent) for Exhaust, Ceiling, pedestal & wall mounted fans.

Supply & Replacement of bearing/ bush of Exhaust, Ceiling, pedestal & wall mounted fans.

Overhauling of Exhaust, Ceiling, pedestal & wall mounted fans.

Rewinding (with copper) of Exhaust, Ceiling, pedestal & wall mounted fans.

Supply of fabricated GI tubular pole of 80 mm dia(medium class), 4.5 Meter long, including welded base plate of 5 mm thick 100*100*5 mm in size, making holes, canopy for fixing Post top lalterns and duly painted with silver colour paint etc. as required, as required

Supply of following rating Electronic energy meter/Trivector meter in poly carbonate or sheet steel body with LCD display of L&T make or its equivalent(ISI marked class-1) complete with accessories etc, as required.

1P LCD Meter 5-30A with LCD display

Supply, Installation & commissioning of following capacity TP&N disconnector SFU enclosed in Sheet steel Enclosure alongwith with DIN type fuse.: 125Amps TP&N, as required

Painting with Synthetic Enemel paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete: On steel work.

Supply & Operation

Supply of High Speed Diesel (HSD), for Agrico & Tuiladungri housing complex D.G. sets, including trasportation, loading and unloading etc, as required. Empty Drum will be provided by NML.

Supply of "Pump operators cum electrician": They have to work in two Shifts of 8 Hrs each (One number of pump operator cum electrician per shift) from 5.00 AM to 9.00PM (7days a week) (see scope of work), as required

Supply of "Helper" to pump operators cum electrician: They have to work in two Shifts of 8 Hrs each (One number of Helper to “Pump operators cum electrician” per shift) from 5.00 AM to 9.00PM (7days a week) (see scope of work), as required

Supply of following labourer for day to day activities, as required (see scope of work).

ELECTRICIAN(Semi skilled/Grade-II) (One Number)

KHALLASI (One Numbers)

Comprehensive maintenance

Comprehensive maintenance & operation of fully Automatic 82.5 KVA DG Set powered with Cummins make Engine Model No.:- 6BTA5.9G1,ESN-P84097741, including all consumables (except deisel), genuine spares, accessories & panel, as required. See scope of work.

Comprehensive maintenance of water supply pump motor set of following capacity (including replacement of impeller, shaft seal, Pumps, Pipes, Valves, bearing, Couplers etc. if required), which includes insulation varnishing of motor, rewinding with copper (if required) breakdown reactification of pump motor set along with all the requisite materials, manpower etc as required for emergency water supply in Agrico Housing complex of NML, through experienced personnal in consultation and after due approval of Electrical In-charge, as required.

3Phase, 20HP Pump motor set

3Phase, 7.5HP Pump motor set

Comprehensive maintenance of Tullu pump set (including replacement of Capacitor, shaft seal, impeller, Couplers, bearing, rewinding with copper etc. if required) 0.5 HP motor, as required

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work uoto plinth level. 1:2:4 (1cement:2coarse sand: 4graded stone aggregate 20mm nominal size.)

Providing and fixing of 3mm phenolic laminated sheet/Perspex sheet on existing metal board/box etc, as required.

Supply of LED BULK-HEAD luminaire 10W(Minimum), IP65 with all accessories as complete.

SHRADDHA ENGINEERING