Improvement of existing power supply and Internal and external illumination with LED lights at FSD Vyasnagar under DO Varanasi.

Amount

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required (Confirming to IS694-2010) as per direction of engineer in charge .

3 X 4 sq. mm

3 X 2.5 sq. mm

3 x 1.5 sq. mm

5 x 1.5 sq. Mm

Supplying and fixing of following sizes of steel conduit along with accessories in surface/ recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. (conforming to IS-9537 Part 3) 25 mm

Dismantling and refixing of steel conduit along with all accessories in surface/recess including painting etc. in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required

Supplying and fixing metal box of sizes 200 mm X 150 mm X 75 mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required. (conforming to IS 14772 (2000)

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections, painting etc. as required.(conforming to IS 3854:1997 )

5/6 amps switch

Supplying and fixing 20 A, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc. as required. (Confoming to relevent BIS/IS standard )

Supplying of 18 to 22 watt LED polycarbonate batten fixture with minimum 100 lumens/watt or Luminous should not be less than 2000 having minimum 2 years warranty (conforming to IS-16103 part 2 (2012)) as per direction of enginner in charge

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required conforming to relevant BIS/IS codes.

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)( conforming to IS-2675 (1983) 6 way , Double door

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. (conforming to IS-IEC60898-1 )

Single pole 16A

Supplying and fixing of following rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. (conforming to IS-IEC60898-1 )

Triple Pole & Neutral 63A

Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 A 240 V C curve DP MCB complete with connections, testing and commissioning etc. as required.(conforming to IS 13032, IS 8623 )

Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required. (Confoming to relevent BIS/IS standard )

Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/coke and salt as required. (Confoming to relevent BIS/IS standard )

Supply of PVC insulated PVC sheathed cable of 1.1KV grade armoured Underground aluminum conductor cable as reqd confirming to IS –7098 part I) of the following size as per direction of engineer in charge .

2X10 sqmm

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1KV grade of following size on wall surface as required. Upto 35 sq. mm (clamped with 1mm thick saddle)

Supply and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. (conforming to IS 12943 (1990) )

2X10 sqmm (19mm)

Supplying and fixing of 32 mm dia X 2.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV / HPSV street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts,bolts and washer, painting the flat iron with primer and finish paint etc. as required. (conforming to IS-1239 part 1 (2004) )

S/I/T/C of loop in loop out box made of PVC sheet 200 X 150 X 100 mm/suitable size having suitable size 2 nos. terminals and 01 no. SP MCB 5/6A detachable gland plate, interconnection etc. as required (Confoming to relevent BIS/IS standard )

Supply , Installation, Testing & Commissioning of LED Street Light fitting with mandatory driver set having die cast aluminium body and lenses suitable for 45 watt with IP66 protection having Luminous 110 Lm/watt to 125Lm/Watt or Luminous should not be less than 4800 and having SPD with internal surge protection upto 4KV and External surge protection upto 10KV,Line voltage protection upto 8Hrs ,autorestart having minimum 2 years warranty (Conforming to IP 65/IP66 protection and IS-16103-2012) as per direction of engineer in charge .

Supply , Installation, Testing & Commissioning of integral well glass luminaire compressed of dia cast canopy gear box housing and glass driver surge with heat resistance glass of LED well glass fitting 35 to 40 watt, minimum 110 Lm/watt to 125 Lm/watt or Luminous should not be less than 4200, SPD with internal surge protection upto 4KV and External surge protection upto 10KV,Line voltage protection upto 8Hrs with autorestart having minimum 2 years warranty (Conforming to IP 65/IP66 protection and IS-16103-2012) as per direction of engineer in charge .

Credit for dismantelled/damaged items:-

Iron scrap (Dismantled conduits, old fittings etc.)

Copper Scrap (i.e., old wires, old ballast etc.)

Aluminium Scrap (i.e., ACSR etc.)

ATUL ENTERPRISES