Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹1.2 LAdmitted-Finance | -2.20% | ₹1.2 L | L1 | Admitted-Finance |
Updated dates
Tender Value
₹1.2 L
EMD Value
₹2,480
Closing Date
15 May 2026, 5:00 pmClosed
EE PWD Elec Dn Ajmer
EE PWD Elec Dn Ajmer
Electrical Repair and Maintenance Work in Jud Resid 1/10 Gokhle lane Ajmer
2026_CEPWD_556012_2
NIT 02 2026-27 EE PWD Elec Dn Ajmer
Open Tender
Electrical Works
60 days
Ajmer
Refer NIT
4 documents required · 4 mandatory
₹500
EGRAS Challan EE PWD Elec Dn Ajmer 7820
₹2,480
Yes
EE PWD Elec Dn Ajmer
26 May 2026
4 May 2026
15 May 2026
4 May 2026
15 May 2026
4 May 2026
12 May 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1.1 | Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible class 2 copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible class 2 copper earth conductor 1.1 kV grade (IS:694) on surface ISI marked MMS ( IS:9537 P - III ) PVC conduit & it's ISI marked (IS:3419-1988) accessories, round tiles, 1.2 mm thick Hot dipped Galvanized MS box with earth terminal of required size , 6 A switch, 3 pin ceiling rose/holder / 3 way connector , 3.0 mm thick ISI marked (IS:2036-1995) phenolic laminated sheet, Al.alloy / Cadmium plated iron/ brass screws, cup washers, making connections, testing etc. as required.
Note:- To ensure strong bond, apply adhesive to the conduit surface before fixing Conduit accessories. | - | - | - | - |
| 1.2 | Medium point (up to 6 mtr.) | 5 | P. point | 414 | ₹2,070 |
| 1.3 | Long point (up to 10 mtr.) | 5 | P. point | 596 | ₹2,980 |
| 2S&F following sizes (dia.) of ISI marked MMS ( IS:9537 P - III ) PVC conduit along with ISI marked (IS:3419-1988) accessories as required in recess including making jhiri in the wall,clamps at suitable spacing, covering conduit and making good the same as required. | |||||
| 2.1 | 20 mm | 45 | Mtr. | 33 | ₹1,485 |
| 3Supplying and laying FR PVC insulated & unsheathed flexible copper conductor of following nominal sizes with ISI marked (IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from copper, stranding in acc. to IS:8130/IEC 60228 for lower watt loss , oxygen free for less chances of oxidization, insulation PVC type A/C/D , flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5, in existing surface or recessed PVC/ MS conduit/casing capping making connections with Copper Lugs of suitable size, Ferrules,testing etc. as required. | |||||
| 3.1 | 1 x 1.5 sq.mm | 100 | Mtr. | 22 | ₹2,200 |
| 3.2 | 2 x 2.5 sq. mm. + 1x1.5sqmm | 110 | Mtr. | 90 | ₹9,900 |
| 3.3 | 2 x 4.0 sq. mm. + 1 x 2.5 sq. mm. | 110 | Mtr. | 142 | ₹15,620 |
| 4Providing & Fixing of 240/415 V AC MCB with positive isolation of 10 kA breaking capacity (B/ C/D tripping characteristic as per type of load and site requirement) 4 KV impulse withstand voltage, ISI marked IS 8828(1996) / conforming to IEC 60898-1 2002, IEC 60947-2, low watt losses, trip free mechanism , energy limiting of class 3 as per IEC, minimum phase termination capacity of 25 sq.mm., conductor line load reversibility , IP 20 contact protection and fitted in existing distribution board/sheets, minimum electrical operation 20,000 upto 20 A rating, 10,000 upto 63 A, 5000 for 80 A & above rating including making connections, testing etc. as required. | |||||
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.82 MB
Tendernotice_2.pdf
PDF • 23.83 MB
Tendernotice_3.pdf
PDF • 4.91 MB
Tendernotice_4.pdf
PDF • 1.76 MB
BOQ_990240.xls
BOQ • 0.42 MB
Download all tender documents and submit your bid