SITC of Street Lights near 5LL Pump House

Amount

Sub Heading 1

Supply, Installation, laying, Testing and Commissioning of 10sqmm 4 Core UG electrical XLPE Cable as per IS:7908.

Supply, Installation, Testing and Commissioning of Cable Wires of cross-section 2 x 1.5 sqmm for connection from Junction box terminals to Street LED light fittings.

Supplying fixing connection testing of 8 -SWG wire along the wall, columns etc, with necessary clamping as required with G.I. wire

Supply, Installation, Testing and Commissioning of PVC Junction Box IP66 with lock provisions to accommodate 6A MCB and terminal connector of UG cable including din rail and neutral link as per drawing and as directed.

Supply, Installation, Testing and Commissioning of 4-Pole Terminal Link Connector suitable for termination of 10sqmm cable.

Supplying & fixing of 6-32 Amp SP Load Kontaket Miniature Circuit Breakers (MCBs).

Supplying, fitting & fixing sheet steel with one way double door enclosure Distribution Box for 1 TP MCB 8 way.

Supply, Installation, Testing and Commissioning of TP with Neutal MCB suitable for 63A current capacity.

Supply, Installation, Testing and Commissioning of Street Light LED Fittings of rating 20 watts.

Supplying, fitting and fixing earthing with GI earth plate 600mmx600mmx6mm thick including accessories & providing mansony enclosure with cover plate having locking arrangement & watering pipe etc with charcoal, salts etc complete as required and as directed.

Earthwork in excavation upto a depth of 2m below the existing ground level for foundation trenches of foundations, footings of column/ walls, retaining walls, septic tank etc. including bailing out water where necessary and removal of surplus earth with all lead and lifts as directed and specified for the following classification of soils. (c) In soft or laminated rock or medium shale.

Providing brick soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete. (c) Stone soling of thickness 100mm.

65 mm thick cement concrete floor consisting of 50 mm under layer of cement concrete in prop. 1:3:6 (1 cement:3 coarse sand: 6 coarse aggregate of25mm and down) and 15 mm thick wearing layer in cement concrete in prop.1:1:2 (1 cement: 1 coarse sand: 2 coarseaggregate of size 10mm down) laid in panels and finished with a floating coat of neat cement finish (using cement slurryfor bond @ 2.75 kg. per square metre of floor area) including curing etc. complete as directed.

Supplying fitting and fixing G.I. Pipes(TATA/ SAIL/ NEZONE and their equivalent) with all necessary 'R' brand or similar approved G.I. Fittings such as bend, tee, elbow, reducer, nipple, plug, long screw fitting, H.W. clamps etc. complete at all levels including below G.L. as directed and specified. (a) Exposed on wall (i) 50 mm diameter.

Providing form work of ordinary timber planking of thickness not less than 25mm and removal of the same for concrete members so as to give a rough finish including centering, shuttering, strutting and propping etc., for height of propping and centering of supporting floor to the soffit of the concrete member not exceeding 4.0 M as specified for the following items: (a) Foundation, footings, bases of columns, pile cap, raft and mass concrete works etc.

Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately). (a) In prop. 1:3: 6 (1 cement:3 coarse sand :6 coarse agg. by volume (using mixture machine).

15 mm thick Cement plaster in single coat on rough side of single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. a) In cement mortar 1:3

Painting two coats (excluding priming coat) on new steel and other metal surface with aluminium paint of approved brand and manufacture(Asian paint/Berger paint/ ICI paint/ J & N paint/Nerolac) and brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter. (b) Surfaces up to 100mm in width or girth.

NONGKYNRIH ELECTRICALS