Erode Zone Erode District Vellottamparappu Town Panchayat 15th Finance Commission Tied Grant 1st Installment 2024 2025

Amount

Earth work excavation for foundation complying with reference clause of TNSS well sinking with in the initial lead of 10 mtr and initial lift of 2 mtr in hard stiff clay, stiff block cotton , hard red earth, shalls murram earth mixed with small size boulders including all other labour charges etc., complete as per std., specification

Plain Cement Concrete 1:4:8 Mix (one part cement, four part sand and eight part of aggrigate) using 40 mm size ISS HBG metal from approved quarry including cost and conveyance of all materials to site. loading and unloading charges and labour charges for mixing. laying and curing etc., complete. complying with std., specifications.

Supplying and erecting centering for sides and soffits including supports and srtutting upto 3.29 m height for plane surfaces in all floors with cross bracings using miled steel sheets of size 30cm x 60cm and 10 gauge stiffened welded with miled steel sheets of size 25mm x 25mm x 3mm for boarding and laid over silver oak (country wood).Joists of size 10cm x 6.5cm dia spaced at about 90cm centre to centre and supported by casurina props of 10cm to 13cm dia spaced 75cm centre to centre etc., complete complying with standard specification ans as directed for the following items as per MORTH Specification 1500.

Below 1.00 mt Height Without Strutting ( Drain )

Above 1.00 mt Height Without Strutting ( Drain )

Supplying fabricating and placing in position of RTS steel rods for reinforcement including the cost of steel and binding wire etc., complete and as directed by Departmental officers.

Vibrated Reinforced cement concrete 1:1.5:3 Mix using 20mm size 1SS HBG grade machine crushed metal and excluding the cost of reinforcement and centring works and including the cost :of mixing laying curing etc complete complying with standard specifications.

Finishing the top of flooring with granolethic floor finish in cement concrete 1:2:4 mix using 10-12mm ISS metal to 25mm thick including cost and conveyance of all materials to site and all labour charges for mixing, laying, curing etc complete.,

chandrasekaran (BID ID -1207793)