Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Accepted-Technical | Accepted-Technical qualified |
| 2 | Accepted-Technical | Accepted-Technical qualified |
| 3 | Accepted-Technical | Accepted-Technical qualified |
| 4 | Not Admitted-Fee/PreQual/Technical | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
Tender Value
₹32.6 L
EMD Value
₹97,877
Closing Date
5 Dec 2025, 4:00 pmClosed
Executive Engineer LDA Leh
Office of the Chief Executive Officer, Leh Development Authority,Leh
Upgradation and landscaping of Tourist Reception Centre Leh (by way of insulation of pipes)
2025_LAHD_18069_1
E tender 27 of LDA Leh of 2025-26
Open Tender
Civil Works - Others
15 days
Leh
Please refer Tender documents.
7 documents required · 7 mandatory
₹1,000
Accounts officer,LDA,Leh
₹97,877
11 Dec 2025
28 Nov 2025
6 Dec 2025
28 Nov 2025
5 Dec 2025
28 Nov 2025
Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineerincharge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc.(For Bathroom & Kitchen- Including Both Hot and Cold Supply from tank and Solar Water Heater Respectively) PN-16 pipe , 25mm OD(SDR-7.4)
Internal Work: Concealed work including cutting chases and making good the walls etc.,) PN-16 pipe , 32mm OD(SDR-7.4)
Providing and fixing PPR Unions PPR Union 32mm
PPR Union 25mm
Providing and fixing for the material insulation of pipe with nitrile tube, taping with cello tape for internal wall fitting complete job including carriage 19mm thick, 50mm thick dia (OD) (PPR 25mm)
Providing and fixing for the material insulation of pipe with nitrile tube, taping with cello tape, polythene, rock wool 6 inch per side, wire mesh and aluminium sheet all complete job including carriage 19mm thick, 50mm thick dia (OD) (PPR 32mm)
Providing and fixing heat tape 33 watt on PPR pipe made of DANFORSED Make OR CHROMALOX any other approved brand as per the direction of Engineer-In-Charge)
Providing and fixing for the material insulation of water storage tank with nitrile tube, taping with cello tape, polythene, rock wool 6 inch per side, wire mesh and aluminium sheet all complete job including carriage 19mm thick nitrile sheet
ELECTRIC AC/HEATER with in built stabilizer (5 star ) 1.5 ton OF QUALITY APPROVED BY ENGINEER IN CHARGE ( DAIKAN BRAND ) incl fitting and all necessary work (wires /sockets) complete.
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size)
Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer
Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and panelling to be paid for separately):For fixed portion. Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)
Providing corrugatedG.S. sheet roofing including vertical /curved surface fixed with polymer coated JorL hooks,bolts and nuts 8mm diametrewithbitumen andG.I. limpet washers or with G.I. limpet washers filledwithwhite lead, includingacoatofapprovedsteel primerandtwocoatsofapprovedpainton overlappingofsheetscomplete(uptoanypitchinhorizontal/verticalorcurved surfaces),excludingthecostofpurlins,raftersandtrussesandincludingcutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gm/ m3
Steelwork inbuiltuptubular (round, squareor rectangularhollowtubesetc.) trusses etc., including 10.16.1 Hot finished welded type tubes
Providing and fixing Pre-laminated flat pressed 3layer (mediumdensity) particle board orgraded wood particle board IS:3087 marked,with one side decorative andother sidebalancing laminationGrade I, Type II exteriorgrade IS : 12823 marked, in shelveswith screws and fittingswherever required, edges tobe painted with polyurethane primer (fittings to be paid separately).
Providing and fixing tradition curved wood work (Shinghak) over door and window including all accessories as per the direction of engineeer incharge.Complete with Budloo wood
French spirit polishing two or more coat on new works including a coat of wood filler
tech_bid_open.pdf
tech_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.39 MB
BOQ_43711.xls
BOQ • 0.33 MB
Download all tender documents and submit your bid