RENOVATION OF PENSION CELL AT GROUND FLOOR, SHAKTI BHAWAN EXTENSION, LUCKNOW

Amount

Laying and Jointing PVC Pipe. Heading

Scrapping old white or colour wash or distemper including disposal of refuse as directed by the Engineer-I/C within a distance of 60 M.

Applying BIRLA PUTTY or equivalent putty on previousaly birla putty smoothen surface over one cost of water base cement primer of ICI or equivalent brand for smoothining and leveling of the surface as per requirement and direction of E/I including cost of all material , labour and T&P required for proper completion of work

Painting one coat with Acrylic emulsion paint of Berger/ Asian/ ICI or equivalent paint (Paint and water in the ratio 1:1 by volume) over prepared and primed surface of cement concrete, cement plaster and bricks including all labour, material and T&P etc required for proper completion of the work, (preparation of base with Birla putty etc. and a coating of primer shall be paid extra) .

Same as above in item no.3 but for every coat after first coat of Acrylic emulsion paint of Berger/ Asian/ ICI or equivalent paint.

Painting or varnishing new iron work in small areas or new wood work with one coat of ready mixed priming paint and one coat of approved superior quality ready mix paint "Luxol" or equivalent brand or varnish including supply of all materials, labour and T&P etc. required for proper completion of the work. Paint to be used should conform to the I.S. 103-1950.

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending.

Providing & Making & Fixing of Wall Panneling as per drawing frame work to be covered with 12 mm thick plywood from the help of fevicol,nails and screw. then making grooves with 6mm MDF Ply with the help of fevicol,nails and screw. The final surface to be finished with 1mm thick laminate and grooves to polished as per design.. as per requirement and direction of Engineer I/C including cost of all material, labour, T & P etc required for proper completion of work.

Providing fabrication of wooden cabinet of dept 0.42Mtr. to be fitted at Pension Cell office at ground floor Shakti Bhawan Extn building having 5 adjacent cup-board of 0.45X 1.3 Mtr.t wo cupboard divided by one middle vertical member..wooden cabinet fabricated with 19mm thick National or Swastik /green Block board or equivalent pasted with 1mm thick sunmica laminate of approved quality texture and shade on all outer exposed surface.The cup-board shall have lockable magnet door fabricated with 19mm block board fixed to cup-board with magnet and having in handle and one . fornt side coverd with flap door fabricated with 19 mm block boradThe visible exposed surface shall be glued with 1mm thick sun mica of approved quality shade and texture. The inner surface shall be glued with0.8 mm thick pointed sun mica of approved quality shade and texture. The cut edges and ends shall be finished with spirit polish teak wood beading of section. . The work includes cost of all labour, material, T&P etc. required for proper completion of work.

Providing ,fabrication & Fixing Workstation of size (W1320XD660XH1200) MM-Consisting 60 mm thick aluminium extruded powder coated panel based partition of height 1200mm having provision of fabric / soft pin up board / white marker, raceways on two level for data & electrical , 25mm thick PLPB work top with pvc edge banding on all sides, top supported by 60mm thick side partition and prelaminated top supported pedestal having 2drawer and one filing drawer which size is W400XD450XHt725 mm with well fitted hardware,like bottom channel,telescopic channel,D-Handel, front lock etc. The workstation has laminated keyboard tray, and laminated CPU trolly as approved by E/I.

Providing,fabrication & Fixing Workstation of size (2580X660X1200)MM - Consisting 60 mm thick aluminium extruded powder coated panel based partition of height 1200mm having provision of fabric / soft pin up board / white marker, raceways on two level for data & electrical , 25mm thick PLPB work top with pvc edge banding on all sides, top supported by 60mm thick side partition and prelaminated top supported pedestal having 2drawer and one filing drawer which size is W400XD450XHt725 mm with well fitted hardware,like bottom channel,telescopic channel,D-Handel, front lock etc. The workstation has laminated keyboard tray, and laminated CPU trolly.

Supply and fixing 24 B.W.G , G.C. Iron Sheet roofing .fixed in position with J or U bolts 10 mm. dia with G.I. Limpet & bitumen washers including supply of all materials, labour,wastage. and T&P etc. required for proper completion of the work.

Repairing of of Executive office computer work station cum work table of size-1500x900x750 in Pension room OF Shakti Bhawan Extn. Building. Top surface finished with approved Quality 1 mm sunmica laminate and intirior faces finished with 10x20 mm thick sprit polish teak wood beading. one number lockable drawersone lockable cupboard 400mm wide finished with1 mm sunmica laminate f .one no lock and one no handle fitted in drawer and cupboard . & back side covered. .The work include cost of all labour,material T&P required for proper completion of work.

Providing and fixing superior, approved quality cotton curtain height approximately 2.65mtr upper side margin 0.05mtr, lower side margin 0.02 mtr, upper side margin fitted proper tape for hanging curtain with the help of hooks and rings at DIFFRENT cabinS no- 604,605of Shakti Bhawan Extn, Lucknow as per direction of Engineer in charge. The work includes cost of all labour, material and T&P etc.

Providing & fixing of Plotter cutting film make crytal as per drawing, specification and direction as approved by the Architect/ Engineer -in-Charge

S/Fixing of double action floor springs including cutting in floors / RCC slabs and grouting the same with C.C. & finishing the surface properly as and where required under aluminium doors as per direction of Engineer-in-charge. including cost of all other material, labour, tools & plants etc. complete.

Supply and fixing of 32 mm thick single leaf flush door shutter ( boiled water resistance, phenol maldehide resin bonded, hot pressed factory made) commercial quality to I.S.2202 part-1 (1983) ISI marked including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges,bolts.locks,handles, springs and other fittings but excluding their supply including all materials, labour & T&P etc. required for proper completion of work.

Supply and fixing brass polished godrej mortise lock of approved make & quality its fixing and adjustment with the help of screws, nuts and bolts including supply of all labour, T & P etc. required for proper completion of the work.

Supply and fixing brass polished hydraulic door closure of approved make & quality its fixing and adjustment with the help of screws, nuts and bolts including supply of all labour, T & P etc. required for proper completion of the work.

M/S KALPANAM CONCEPTS

AAKRITI ENTERPRISES