Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.0 LAccepted-Finance N0 15 ASHOK NAGAR MAIN ROAD MES ROAD 3RD CROSS STREET EAST TAMBARAM CHENNAI 600 059 | CHENGALPATTU | TAMIL NADU | 600059 | L1 | Accepted-Finance Admitted being the lowest | |
| 2 | L2₹36.1 L+₹1.1 L (3.14%)Rejected-Finance NO 5 3 JJ KHAN ROAD 1ST LANE ROYAPETTAH CHENNAI 600 014 | CHENNAI | TAMIL NADU | 600014 | L2 | Rejected-Finance L1 Being the lowest. | |
| 3 | L3₹37.6 L+₹2.6 L (7.31%)Rejected-Finance NO 21 BRAMIN STREET KORATTUR CHENNAI 600080 | CHENNAI | CHENNAI | TAMIL NADU | 600080 | L3 | Rejected-Finance L1 Being the lowest. | |
| 4 | L4₹37.9 L+₹2.9 L (8.19%)Rejected-Finance D 3 7TH BLOCK JAIN GREEN ACRES DHARGA ROAD ZAMIN PALLAVARAM CHENNAI 600 043 | CHENNAI | CHENNAI | TAMIL NADU | 600043 | L4 | Rejected-Finance L1 Being the lowest. | |
| 5 | L5₹38.5 L+₹3.5 L (9.92%)Rejected-Finance HOUSE NO 105 PANTHEERMA VILLAI NEAR NELLIKKAVILLAI CSI CHURCH VELLAYAMBALAM VENCODE P O KANYAKUMARI DIST TAMIL NADU 629 171 | VENCODE | KANYAKUMARI | TAMIL NADU | 629171 | L5 | Rejected-Finance L1 Being the lowest. |
Tender Value
₹40.2 L
EMD Value
₹80,400
Closing Date
6 Feb 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer (I)(CG) Chennai
Garrison Engineer (I) (CG) Military Engineer ServiceCGRA Meenambakkam Building No P 16 NGO Colony 4th Street Nanganallur Chennai 600 061
ADDITION / ALTERATION/RENOVATION TO GURAD ROOM AND URG BLDG AT ICGAS CHENNAI UNDER GE(I) CG CHENNAI
2024_MES_638323_1
8102/E8
Open Tender
Civil Works
Item Rate
240 days
Garrison Engineer (I)(CG) Chennai
All as per tender documents
8 documents required · 8 mandatory
₹500
Garrison Engineer (I)(CG) Chennai
₹80,400
Yes
13 Feb 2024
19 Jan 2024
8 Feb 2024
19 Jan 2024
6 Feb 2024
25 Jan 2024
Amount
Demolition of plain cement concrete in groud floors and pavings not exceeding 15 cm thickness including removal of debris outside MD land complete all as specified and as directed.
Material and labour for 75 mm thick plain cement concrete 1:3:6 type C2 using 40 mm graded granite stone aggregate as in plinth protection and pavings finished fair and even without using extra cement including making grooves at junction of existing wall and in plinth protection at 2.50 meter c/c complete all as specified and as directed.
Demolition of reinforced cement concreteof any description and in any position not otherwise specially provided including removal of debris outside MD land complete all as specified and as directed
Material and labour for corrosion resistant TMT bars of grade Fe-500/500D of10mm dia bar and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
M&L reinforced cement concrete of 1:1:2 ( 20mm graded stone aggregate as in slabs supported on walls,beams and columns i floors, roofs, landings, balconies, canopies, deck slabs and in shelves complete all as directed. Note: Reinforcement shall be measured & paid seperately.
Material and labour for Form work to flat surface of soffits of suspended slabs such as roof slab floor slab, landings and similar work not exc 200 mm thick all as directed by Engr - In Charge
Demolition of brick work or stone masonry built in cement mortar or cement lime mortar including all quoins,arches, pillars etc including removal of debris outside MD land complete all as specified and as directed.
M&L fly ash Brick work sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 Complete all as specified and as directed.
M&L fly ash brick work sub class ‘B’ brick straight or curved on plan to any radius in half brick wall in cement mortar 1:4 complete all as specified and as directed.
M & L for taking down cement of cement lime plaster of any description on brick or stone walls etc including ranking out joints hacking for key scrubbing down with water etc complete all as specified and as directed by the Engineer-in-Charge
Material and labour for Rendering 15 mm thick in CM 1:6 on fair faces of brick wall or concrete surfaces finished even and fair complete all as specified and as directed.
Material and labour for Rendering 10 mm thick in CM 1:4 on fair faces of brick wall or concrete surfaces finished even and fair complete all as specified and as directed.
Material and labour for Rendering in CM 1:3, ,5 mm thick on fair faces of brick work or concrete surfaces in ceiling finished even and smooth without using extra cement complete all as specified and as directed.
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing ) including removing serviceable tiles to store and rubbish off the premises not exceeding 100 metre complete all as specified and as directed.
M&L for vitrified ceramic light shade tiles 10 mm thick (square/Rectagular) polished area exceedign 0.36 sqm and n exc 0.42 sqm in each tiles as in floors etc set and jointed in neat cement slurry and pointed in white coloured cement to match the shade of tile over and including 15mm thick screed bed in cement and sand mortar (1:4). complete all as specified and as directed. Note :- Quoted rate shall deem to be included cost of screed bed. Note:- Before executing of Tiles work ATT Will be done and ATT will be measured and paid seperately
M & L for Non-Skid coloured printed ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.18sqm and not exceeding .38 sqm of each tiles as in skirting / dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4 for laying glazed tiles in floors etc. complete all as specified and as directed by the Engineer-in-Charge Note :- Quoted rate shall deem to be included cost of screed bed. Note:- Before executing of Tiles work ATT Will be done and ATT will be measured and paid seperately
S & F for Glazed ceremic coloured printed tiles of size 350 mm x 250 mm x 7 thk or 450x 350mm x7mm thick as in dados, skirting, wall etc set jointed in neat cement slurry and pointed in coloured cement to match the tiles over and including 10 mm thick rendering in CM 1 : 4 for laying glazed tiles in floors etc. complete all as specified and as directed by the Engineer-in-Charge
M & L for cement concrete tiles of any size /shape thickness 20-25mm set jointed and pointed in neat cement slurry in floors, with grey cement and pigment to match the tiles over 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes, complete all as specified and as directed by the Engineer-in-Charge
M & L for 16-18 mm thick machine cut,Granite stone slab (of any type)(table rubbed and polished) in plate forms and like in cement mortar 1:4 bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types and making mould on edges & including cutting of three numbers of grooves etc complete all as specified and directed
M&L for Green Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including 15mm thick screed bed in CM 1:4. complete all as specified and as directed.
M&L for Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including laid over 10 mm thick rendering in CM (1:3) complete all as specified and as directed.
Remove and refixing of Stainless steel post 900mm height including polishing complete all as specified and directed by Engr-in- Charge.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sq. m each complete all as specified and as directed by the Engineer-in-Charge
Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sq. m but not exc 4 sq. m each complete all as specified and as directed by the Engineer-in-Charge
Taking down shutters of any description exc 1 sq. m and not exc 2 sq. m each complete all as specified and as directed by the Engineer-in-Charge
Resecuring or easing & adjusting shutters of any description exc 1 sq. m and not exc 2 sq. m each, without taking down shutters complete all as specified and as directed by the Engineer-in-Charge
S & F solid PVC door frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet & edges will be painted to match with prelam sheet, reinforced with M.S. square tube and fixing in opening as per specification & drawing complete all as specified and as directed by the Engineer-in-Charge
S & F Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M. S. tubes for top & bottom rails. M. S. frame shall be covered with heat moulded plain colour PVC `C` channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M. S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed by the Engineer-in-Charge.
Supply and fix 2nd class hard wood, plain, solid, straight framed, in parts rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed by the Engr-in-Charge.
M&L for PCC(1:2:4) for hold fast(12.5mm graded aggregate ) type B-0, cment concrete and mass concrete with WPC all as specified and directed
S & F 35mm thick, flush shutters, solid core construction, with block board core and plywood face panels, with 2mm decorative laminates on both sides of the shutters complete including applying french polish on the doors complete all as specified and directed by Engr-in-Charge.
Supply and fix 35mm thick 2nd class hard wood glazed and skelton shutter open rebated and prepared to receive glass ,gauge etc ( without sash bar) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc size of members of shutters as specified in SSR Part-I, section 8 clause 8.20(a), supplied and fitted to chowkats.
S&F aluminium powder coated any colour as approved Door shutters, incl frame with prelaminated board of 6 mm thick at bottom , without sash bars including guide rollers as reqd nos, including 4mm thick glass necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings as required like suitable handle, star lock etc complete all as specified and directed (Note- Rate incl for providing slide or fix type mosquito proofing shutter and addl track if reqd)
M&L for Aluminium powder coated window and ventilator shutters, side hung type, without sash bars, aluminium section weighing not less than 0.55 Kg/Metre including clips, rubber packing aluminium snap beading, screws, fittings (each shutters) such as peg stays 150 mm long, hinge type B-21 100 mm long (2 Nos), 150mm long D type handle (one number) and tower bolt 150mm long (one number) (Notes : (i) Glass panels to windows/ventilator shall be measured and paid for separately under respective item of this schedule as supply only. (ii) Thickness of powder (polyster) coating shall not be less than 50 Micron. (iii) Shade/tint of powder coating (epoxy polyster) shall be as approved by GE. (iv) Frame shall be measured and paid for separately under respective item of this schedule. (v) Quoted rate shall deem to included cost of alumiumum powder coated builder hard ware.
M & L for anodised aluminium grill (anodised transparent or delyed tp required shade according to IS 1868 with minimum anodic coating of grade AC 15) of approved design /Pattern, with approved standered section and fixed to the existing window frame with CP Brass stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer?in-charge. → (a) The rates include for provision of PVC protected sheeting and its removal after fabrication. (b) The work shall be measured and paid for net finished work of grid frame. (c) The rates shall also include for necessary notching and prepared holes.
(d) The rates do not include for supporting hanger comprising of mild steel rod, J bolt with necessary washers, bolts and nuts, for securing frame work to ceiling and to the snap grid (e) The supporting hanger comprising of mild steel rod, bolts with necessary bolts, nuts and washers shall be measured Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge.
S&F of 5.5mm thick Sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane
Supply only 4mm thick figured glass, pin head type not exc 0.5 sqm in each pane
S&F of framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0
S & F in butt hinges mild steel cold rolled mild and fixed 100mm size, type C-22, extruded mild steel with mild steel hinge pin, anodised complete all as specified and as directed by the Engineer-in-Charge
S & F butt hinges alluminium alloy with galvanised mild steel hinge pin 75mm size, type C-22, complete all as specified and as directed by the Engineer-in-Charge
S & F 200mm aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and as directed by the Engineer-in-Charge
S&F 300mm long of alluminium sliding door bolt with hasp, staple (bolt type) with sand or die cast and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or brass door shutter complete all as specified and as directed by the Engineer-in-Charge.
S&F in 100mm length extruded alluminium alloy handles fabicated type, anodised all specified an directed by Engr In Charge
S&F in 150mm length extruded alluminium alloy handles cast type , bright polished all as specified an directed by Engr In Charge
S&F continous (Piano) hinges of mild steel bright finish or elctrogalvanised 30mm flap width all as specified and directed by Engr In Charg
S&F in Mortice lock 4 lever with handle complete set make godrej cart part No 172 complete all as specified and as directed.
S&F brass cupboard locks grade I, 4 LEVER of size 65mm all as specifed and directed by Engr in Charge
S & F floor door stopper of brass body and 140mm with hard drawn steel spring complete all as specified and as directed by the Engineer-in-Charge
S & F wardrobe hooks (single) 50mm to 60mm, aluminium, complete all as specified and as directed by the Engineer-in-Charge
S & F 40mm dia, cupboard knobs fixed with nut, screw and washer of brass polished complete all as specified and as directed by the Engineer-in-Charge
M & L in repairs for sheet glass 4.0mm thick, ordinary quality and glazing with oil putty in square n exc 0.5 sq m in each pane complete all as specified and as directed by the Engineer-in-Charge
S&F in repairs 20 to 25mm external dia drapery rods stain less steel with incuding designer lattos and brackets all as specified and approved by Engr In charge including taking out old pelmet with curtain rods all as directed.
S & F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.
S & F in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.
Preparing of New or previously painted wooden surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified and directed by Engineer-in-charge.
M & L for, Preparing of new untreated steel surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint & onr coat of red oxide zinc chorme primer complete all as specified and directed by Engineer-in-charge.
Taking down steel tubing and connections including removing from site of 15mm bore pipe all as specified and directed by Engineer-in-charge.
All as above item No 58 but 20mm bore.
S&F 15mm bore steel water tubing medium grade , galvanized ISI marked with all fittings fixed to wall & ceiling or laid in floors complete all as specified and directed by Engineer-in-charge.
All as per item No 60 bove but 20mm bore
Cuttings chases for concealed water tubing of concealed conduit (cutting n.exc 10 cms girth) and making good in CM ( 1:3) in brick walls complete all as specified and as directed..
S&F gate valves gun metal with iron wheel head screwed both ends for iron pipes and fixed 25mm fixed in repair. Complete all as specified and as directed.
S&Fas in repair Vitreous china squatting pan "Orissa " pattern size 580x440mm white with integral foot rest all as fixed in repairs including ‘P’ or "S" trap including PVC low level cistern of 10 litres capacity including brackets jointing to flush pipe, PVC connection (450x15mm) flushing pipe complete fixed in repair all as directed by Engr-in-Charge.
S&F brass chromium plated waste coupling 32mm bore WHB complete all as specified.
Supply and fix 32mm bore and 60cm long PVC waste pipe for WHB/sink complete all as specified.
S&F in repair 15mm bore pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified.
S&F in repairs CP brass shower rose with svival joint 125 mm size suitable for 15 mm bore pipe complete all as specified.
S&F 15mm brass concealed stop cock fancy type ISI marked cost copper alloy, screw down high preasure with crutch or butterfly handle screwed both ends suitable for iron pipes of 15 mm bore complete all as specified.
S/F in repairs 15 mm bore bib taps ISI marked chromium plated and fancy type with crutch or butter fly handle high pressure screwed down for iron pipes complete all as specified.
S/F in repairs 15mm dia PVC Connection 600 mm long with 2 nos brass check nuts suitable for 15 mm bore of pipe with washers complete all as specified.
S&F Heath faucet CP for with 1.00 mtr long pvc pipe incl necessary eassary GI fittings as required like tee, nipple etc all as specified and directed.
S/F in repairs 600 x750 mm fancy type looking mirror designed as required at site as directed by Engr In Charge including all necessary fittings
S/F in repairs of glass shelf assembly consisting of 5.5 mm thick sheets glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long all as directed.
Supply and fix soap dish chromium plated brass fixed with brass nuts as in repairs.
Supply and fix CP Towel rail 600mm long fixed with and including chromium plated brass screws and wooden/plastic cleats all as specified
S&F 100 mm dia CI sand cast soil waste and vent pipes in any length with or without ears with cement joints laid in trenches or in floors/fixed to wall or dia in repairs complete all as specified and as directed by Engineer-in-Charge..
S&F in repairs 20mm bore ball valve of pvc with rod and reducer of 25 to 20mm if required and polythene float complete all as specified.
S/F in repairs to rotational moulded vertical water storage tanks with closed tops ( cylinderical ) hoisted and fixed in position 1000 ltr capacity incl disconnecting and refixing the existing GI fitting and pipe complete all as directed.
M & L for 100mm bore dia cast iron floor trap with CP grating, with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B1all as specified and directed
S & F CP grating doom grating doom 100mm/110mm dia all as specified and directed
S&F 110mm dia PVC SWR pipes of pressure 6kgf/cm2 fixed complete to walls ceilings, in floors etc including all necessary fitting arrangements and bends couplings etcas in rainwater pipe all as specified and directed by Engr-In-Charge
S&F PVC (SWR) bends of 110mm bore.
Taking down existing old tarfelt, bituminous compound including cleaning & removing debris to a distance exc 100 m n.exc.250m.
Demolition of Mud/mud puska in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and directed.
M&L 25mm thick (average) PCC (1:2:4) type B-0 (using 12.5 mm graded stone aggregate) as in roof padding, benching existing roof slab laid to slope as per existing or as directed including finished surface even & fair complete all as specified and directed.
M&L for 10 mm rendering in CM 1:4 including water proofing compound @2% of cement over roof surfaces finished even and smooth without using extra cement complete all as specified Note:- WPC Mesured and Paid Separately.
Supply only for Integral water proofing compound.
M&L for Applying bituminous primer @ 0.40 litre per Sqm over plastered surfaces of roof including parapet surfaces complete all as specified and as directed.
M&L for Applying evenly a tack coat of induatrial bitumen 85/25 grade @ 1.2 Kg/Sqm complete all as specified and as directed..
M&L for One layer of APP based polymeric membrane of approved manufacturer, 3mm thick, weight not less than 3.50 Kgs per Sqm , reinforced with non woven polyester fabric or weight not less than 150 gms per Sqm . Polymeric membrane shall be taken to a height 60 cm (minimum) and then inserted inside the groove of parapet wall and shall be finished by a membrane flashing(Note (i) Laying of APP based polymeric membrane shall be done by torch on method or as per manufacturers instructions (ii) A Minimum overlap of 100 mm and 75 mm should be made in the end and sides of the polymeric membrane respectively and sealed all overlaps and joints as manufacturers instructions (iii) The make of polymeric membrane shall be IWL India Ltd chennai. Ltd or "MOPLY FP" of Texsa India Ltd).
NOTE : S&F of APP based polimeric membrane of approved manufacturer will be laid/fixed by authorised person of the same manufacturers units asper relevent IS.
Applying one coat of aluminium paint on top of APP membrane.
M&L preparation of newly plasterred surfaces of walls and applying three coats of white wash complete all as directed.
M&L preparation of old decorated surfaces of ceilling corinces, pillasters etc and applying one coat of white wash complete all as directed.
Preparing of Old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-charge.
Supply and fix in repair vitreous china counter wash hand basin snow white miniumum size 560mmx470mm fixed in grante slab including chromium plated brass coupling, bottle trap, chromium plated brass centre hole mixer, PVC braided connection (two numbers), angular stop cock ( valve) complete all as specified in particular specifications. Note : (i) Counter wash hand basin cat Part No. 1005A of 'Cera' or equivalent model of make specified in Appendix 'B' to particular specifications. (ii) Quoted rate also include cost of s&F of 20mm thick telephone black machine polished granite slab in single piece of minimum size 900 mm x 600mm including necessary cutting and bevelling of exposed edges of slab. (iii) WHB shall be fixed to granite slab with M-seal or Araldite to make leak proof joint.
M&L for Treatment of soil under existing floors using emulsion @ one litre per hole , 300mm aoart including drilling and plugging 12 mm dia holes with cement mortor 1:2( 01 cement : 2 coarse sand) to math the existing floors all as specifed and as directed
M&L for ATT along the external wall below concrete or masonry apron using chemical emulsion @2.25 litre per linear metre including drilling and plugging holes etc in apron
Providing precast cement concrete of 1:2:4 Type B 0 (12.5mm graded aggregate), louvers and jallies 25mm thick ( measured solid ) set in cement mortor, including all mouldings but excluding frames all as specifed and as directed
Taking down existing cement plaster of any description over damaged surfaces irregular facia, chajjas and in similar work and also for narrow width etc and rendering dubbing coat 15mm thick cement plaster in CM (1:4) over a coat of cement slurry @ 3.00 Kg/Sqm making surface even ( avg 50mm thick PCC 1:2:4 type B-1 using 20mm crushed stone aggregate shall be provided wherever required) followed by 05mm thick rendering in CM (1:3) finished complete all as specified and directed including two coats of cement base paint over a coat of primer over new plaster surface including preparation etc complete.(after curing of specified time and drying the surfaces as required). complete all as specified and as directed.
Preparing of previously painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-charge.complete all as specified and as directed.
M & L preparing new plastered surfaces of walls and applying Finishing of wall with acrylic smooth exterior paint of required paint of required shade new work (two or more coat applied @ 1.67ltr/10Sqm and including priming coat of exterior primer applied @ 2.2 Kg/10 Sqm) complete all as specified and as directed. .
M & L for complete removal of existing trreatment preparing old plastered surfaces of walls and applying Finishing of wall with acrylic smooth exterior paint of required paint of required shade new work (two or more coat applied @ 1.67ltr/10Sqm and including priming coat of exterior primer applied @ 2.2 Kg/10 Sqm). complete all as specified and as directed.
Preparation of newly plastered surfces of walls and applying Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work over a coat of wall care putty 3mm thick complete all as specified and as directed.
Preparation of Complete removal of existing trreatment preparing old plastered surfaces of walls and applying Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work over a coat of wall care putty 3mm thick complete all as specified and as directed.
Preparation of newly plastered surfces of Ceiling and applying two coats of oil bound distemper over a coat of wall care putty 3mm thick complete all as specified and as directed.
Preparation of Complete removal of existing trreatment preparing old plastered surfaces of Ceiling and applying two coats of oil bound distemper over a coat of wall care putty 3mm thick
M&L 100mm bore CI floor trap with grating including jointing CI pipe in run lead, cutting holes in walls and making good surface in cement concrete surface type B-1 (1:2:4) complete all as specified and as directed.
M&L 75mm bore CI floor trap with grating including jointing CI pipe in run lead, cutting holes in walls and making good surface in cement concrete surface type B-1 (1:2:4) complete all as specified and as directed.
S&F for Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars,top and bottom runners, brass handles etc, as specified, erected in positoin and securing runners with holdfasts and brackets, complete all as specified.
Dismantling Plin or Corrugated steel sheeting, any guge, thickness in roof covering and removing from site of work complete all as specified
M & L for Dismantling wrought iron or mild steel work of any description not otherwise provided all as specified and directed
S&F Steel work in roof trusses(Framed) , Trussed Purlins , crane gantries,rails and heavy bracket framing(Beam,tee,angle channel or flat sections) etc including including distance piece,cleats etc. complete using Fe 410-W(Gde-E 250) quality A complete all as specified and directed .
S&F mild steel screws bolts (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends , each screwed end to be fitted with washers and one hexagonal or square nut , length of bolts exc 10cm but n.exc 15 cm and diameter of shank 16 to 20 mm complete all as specified and directed .
S& F 0.50mm thick Pre painted galvalume alluminium zinc coating GI based corrugated steel sheeting with colour having tensile strength 550Mpa as in roof covering /Cladding to wall fixed with self tapping screws as specified. and 15cm end lap fixed with'L' type or 'J' type hook bolt (08mm dia) complete all as specified and as directed of class VIII.
S& F 0.50mm thick Pre painted galvalume alluminium zinc coating GI based Plain steel sheeting with colour having tensile strength 550Mpa as in roof covering /Cladding to wall fixed with self tapping screws as specified. and 15cm end lap fixed with'L' type or 'J' type hook bolt (08mm dia) complete all as specified and as directed of class VIII.
Dismantling wall and ceiling boards (fibre, pulb, insulation etc) or insulation boards slabs/blankets any thickness including cover fillets all as specified and as directed.
M&L for suspended false ceiling using E-grid 2430, 180 GSM (exposed ceiling suspension system) of grid size 600mmx600mm with main runner 38 mm x 24 mm and wall angle 24mm x 24mm using 8mm thick high Pressure Non Asbestos Fiber Cement decorative Board 12 mm thick (E-Board Classic) in a grid of aluminium duly suspended with 4 mm dia GI bar hanger fixed with steel dash fasteners or iron purline from the roof eith adjustment clip providing positions for light fixtures, air conditioning diffuser and ducts, sprinkler, smoke detectors etc. The main runners to be secured to structural soffits by hanger @ 1220 mm maximum c/c. The last hanger at the end of each main runner should not be interlocked between main runners @ 610mm c/c, as to form 600 mm x 600 mm grid all as specified and directed. Make : Gytech (Saint Gobin - Design No 154 Industries Ltd or equivalent as per IS 14862.)
M&L 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing as completed as Speciifed and directed .
M&L for 5mm thick Solid PVC wall lining consisting of Single side prelam PVC sheet of wooden grain printed PVC sheet color inclusive of Solvent Cement without relevant and fixing at site on PVC frame as completed all as specified and directed.
S&F Vitreous china wash down closet pan (Pedestal pattern) white with ‘S’&'P' trap plastic seat cover white including connection to out going pipe & to flushing pipe, anti syphonage pipe etc complete all as specified and directed by Engineer-in-charge (including making good to floor and fixing in repairs)
S&F PVC low level flushing cistern (white) of 10 liters capacity with inlet ball float valve, PVC flush pipe and necessary fixing arrangements and connecting to water pipe and WC etc and fixed in repairs complete all as specified.
Supply and fix in repairs vitreous China urinal, half stall type complete including waste pipe, flush pipe & providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement etc, and including connection to flushing pipe and outgoing pipes fixed in repairs complete all as specified and as directed by Engineer-in-Charge.
Taking down carefully point wiring with copper/aluminium conductor (light,fan, socket or power complete ) and fittings such as switches,ceiling roses,pendents,regulators,sockets,light fittings,calling bell etc and removing material from site and taken as credit and making good the disturbed surface of wall/floor etc to match with the existing surfaces complete all as specified and as directed.
Taking down carefully submain wiring with aluminum conductor cable 4/6/2.5/1.5 Sqmm in PVC conduit complete including making good the disturbed surface of wall / floor etcand removing material from site and taken as credit and making good the disturbed surface of wall/floor etc to match with the existing surfaces complete all as specified and as directed.
Taking down carefully unserivce able TPN/SPN DB with MCBcomplete including making good the disturbed surface of wall / floor etcand removing material from site and taken as credit and making good the disturbed surface of wall/floor etc to match with the existing surfaces complete all as specified and as directed.
Material and labour for Point wiring with 1.5 sqmm (Nominal area) unsheathed multi-stranded copper conductor FRLS PVC insulated cable 1100 volts grade single core drawn into and including non mteallic rigid PVC conduit of size 25 mm dia concealed in wall/floor etc along with 1.5 sqmm unsheathed multi stranded copper conductor FRLS cable PVC insulated 1100 volts grade as earth continuity conductor connected to common earth dolly fixed to wall/ ceiling/ roof with and including PVC recangular board of adequate size for mountling switches, socket, fan regulators etc complete for the following points complete all as specified and as directed. Note: (i)Make of PVC cable : Finolex/ Polycab/Plaza.(ii) Make of PVC Conduit :Avon Plast/Presto Plast/Finolex
One light point controlled by one switch
One fan point controlled by one switch
Material and labour for Sub main wiring with two runs single core 2.5 sqmm multi stranded copper conductor FRLS PVC insulated unsheathed cable 1100 volts grade and one run of 2.5 sqmm multi stranded PVC FRLS copper conductor cable as earth continuity conductor drawn in PVC Casing caping in surface/recessed as required etc complete all as specified and as directed. Note:. (i)Make of PVC cable : Finolex/ Polycab/RR Kabel Ltd/Anchor/HPL (ii) Make of PVC Casing Capping & PVC fitting/fixtures :Kalinga/Pesto Plast/Finolex (iii) Three different colour cable shall be used for phase, neutral and earth (iv) The PVC cable connections with MCBs or Busbar shall be done through appropriate size brass/copper thimbles. (v) To be measured for 15 Amp socket and DB to main switch box
Material and labour for Sub main wiring with two runs single core 1.5 sqmm multi stranded copper conductor FRLS PVC insulated unsheathed cable 1100 volts grade and one run of 1.5 sqmm multi stranded PVC FRLS copper conductor cable as earth continuity conductor drawn in PVC Casing caping in surface/recessed as required etc complete all as specified and as directed. Note:. (i)Make of PVC cable : Finolex/ Polycab/RR Kabel Ltd/Anchor/HPL (ii) Make of PVC Casing Capping & PVC fitting/fixtures :Kalinga/Pesto Plast/Finolex (iii) Three different colour cable shall be used for phase, neutral and earth (iv) The PVC cable connections with MCBs or Busbar shall be done through appropriate size brass/copper thimbles. (v) To be measured for 5 Amp socket and DB to main switch box
Supply and fix modular Switch 6 Amps one way Flush type 240 Volts AC complete all as specified and directed.Make: Legrand/Anchor/ABB
Supply and fix modular Switch 16 Amps one way Flush type 240 Volts AC complete all as specified and directed.Make: Legrand/Anchor/ABB
Supply and fix modular socket 2/3 pin 6 Amps Flush type 240 Volts AC 2 Module complete all as specified and directed.Make: Legrand/Anchor/ABB
Supply and fix modular socket 2/3 pin 16 Amps Flush type 240 Volts AC 2 Module complete all as specified and directed.Make: Legrand/Anchor/ABB
Supply and fix modular metal box, Flush type , 3- Module complete all as specified and directed.Make: Legrand/Anchor/ABB
Supply and fix modular white cover plate with frame 3-Module complete all as specified and directed.Make: Legrand/Anchor/ABB
Supply and fix modular metal box, Flush type , 6- Module complete all as specified and directed.Make: Legrand/Anchor/ABB
Supply and fix modular white cover plate with frame 6-Module complete all as specified and directed.Make: Legrand/Anchor/ABB
Supply and fix Ceiling rose, surface type, PVC of 25 x 50mm, two to three terminals AC 230 V complete all as specified and as directed.
Supply and fix sheet metal enclosure for Board distribution double door with 200 Amps double door rated bus bar SPN 8 way complete all as specified and as directed. Make:- C&S/HPL/Legrand
Supply and fix MCB SPN 5 to 30 Amps, Repturing capacity 10KA complete all as specified and as directed. Make:- C&S/HPL/Legrand
Supply and fix MCB SP 5 to 16 Amps, Repturing capacity 10Ka complete all as specified and as directed. Make:- C&S/HPL/Legrand
Supply and Fix Recess mounted 2' x 2' LED flat panel 34W ,4000k high efficiency with high brightness LED for glare free homogenous illumination mounted square slim and elegant downlight/panel for indoor application with high aesthetic appeal,available in various wattage for soothing light suitable for grid ceiling with super bright LED model complete with all accessories internally pre wired and connecting up with twin core twisted flexible copper conductor cable with suitable size including taking down old one and taken as credit complete all as specified and as directed. Make: Havells / Philips/Cromtpon/surya/Bajaj
Supply and fix LED light fitting 4 feet white, 20W, integrated LED driver etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size. complete all as specified and as directed. Make:- Philps Cat Part No. BN021C LED20 S PSU CW GR S2 In case the make mentioned above is not available in market then equivalent price and specification in M/S Wipro /M/S Bajaj /Havells/Crompton.
Material and labour for Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6mm thick, burried directly in ground (earth pit not less than2.25 Metre, deep below ground level) with top edge of the plate not less than 1.5 meter below normal ground level connected to galvanized iron strip 32 x 6mm by means of bolts, nuts washers checknuts of galvanized or steel all as shown in electrical plate No 3 of SSR Part I connected to earthing test points all as specified or indicated including 25 Kgs of Bentonite powder and excavation and earth work, PCC 1:2:4 type 1 in chamber, RCC cover 50mm thick in 1:2:4, type B1 (20mm graded aggregate) with 8mm MS rod at 15cm in both ways hook, funnels with 50mm dia protection pipe and 20mm dia medium grade watering pipe, wiremesh and GI lugs, GI protection pipe and testing on completion complete all as specified and as directed Note: The rate quoted inclusive of 32X6mm GI earth strip upto a length of 7.5mtrs from the earth pit
Supply and fix 5 Star rating ceiling fan 1200mm sweep Min air delivery 210 CFM with service value of 6.0 BEE five star rated with brush less direct current motor (BLDC).” suitable to work on single phase AC 230 Volts 50 Hz complete including connecting electrically to ceiling rose or connector block using PVC insulated sheathed 3 core cable 0.75sqmm flexible copper conductor and including taking down old fans and removal to store complete all as specified and as directed. Make : Anchor/Havells/Crompton
Supply and fix fans table/pedestral 230 volts single phase osciallating 400 mm sweep complete all as specified and as directed. Make : Anchor/Havells/Crompton
Excavating in trenches not exceeding 1.5 M wide and not exc 1.5 metre deep and getting out in hard/dense soil complete all as specified and as directed
Returning, filling in soil including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specifed and as directed.
Supply and laying of Double walled corrugated High density polyethylene pipe (DWC - HDPE pipe) of 40 mm dia of pressure rating of 6kg/cm2 laid with all bends, angles having corrugated on the outer wall and plain having corrugation on the outer wall and plain surface inner wall conforming to IS 14930 part-I and part-II complete with necessary HDPE fittings for protection of 1.1 KV grade under ground cable directly in ground at a required depth required complete all specified and as directed. Make: Jain Irrigation/Kisan/Prince/Supreme/Oriplast/Finolex/Diplast
Material and labour for Plain cement concrete 1:3:6 using 20 mm graded stone aggregate for foundation filling, basement and mass concrete complete all as specified and as directed.
Supply, lay and test LT UG cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 1100 volts grade, of size 2 core 10 sq mm complete all as specified and as directed. (Note : Make of cable : Gloster/Polycab/CCI). Note:Earth work and excavation ,, cable protection etc shall be measured and paid seperatel
Supply and fixing of double pole MCB 32 Amps. 240 volts complete with enclosure and incoming and outgoing connection complete all as speciifed and as directed. Make:- C&S/HPL/Legrand
Supply, install,testing and commissioning of 10 W new generation energy saving envirmental friendly, long life aesthetically designed aluminium (non corrosive) landscape luminaire for diffused lighting with high power LED Bollard as light sources wiith 1.0 mtr height including junction box 120 X70 H ccomplete all as specified and as directed. Make:- Philps/ M/S Wipro /M/S Bajaj /Havells/Crompton.
Supply and fix junction box of size 120X70H for bollard light fitting all as specified and as directed by Engineer-in-charge .Make: Sintex/Hensel/C&S
G.JANAKIRAMAN CO
kvs constructions
lakshmibuilders
DJ Group
M/s.Sai Agency
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .