Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹5.4 Laccepted-aoc | ₹5.4 L | accepted-aoc |
Tender Value
₹8.7 L
EMD Value
₹22,000
Closing Date
21 Apr 2026, 9:30 pmClosed
Directorate of Municipal Administration
Umesh Madival
Construction of Public toilet and urinals at bazar area
DMA/2025-26/BD/WORK_INDENT56167
DMA/2025-26/BD/WORK_INDENT56167
Open
Buildings
Electronic Documents, First(One Cover)
DMA Town Panchayat Honnavara
6 documents required · 6 mandatory
₹500
₹22,000
21 Apr 2026
6 Apr 2026
10 Apr 2026
Construction of Public toilet and urinals at bazar area
Demolishing cement concrete manually/ by mechanical means including
disposal of material to the appropriate disposal area as per direction of
Engineer-in-charge.
Demolishing stone rubble masonry manually/ bymechanical means
including stacking of serviceable material and disposal of unserviceable
material to the appropriate disposal area as per diirection
Earth work excavation by manual means for drains, canals, waste weir, draft,
approach channels, key trenches, foundation of Buildings & bridges and such
simillar works in all kinds of soils, as per ...
Providing and laying in position Cement Concrete for levelling course for
all works in foundation. The granite/trap/basalt crushed graded coarse
aggregates and fine aggregates as per relevant IS Cod...
Providing and Filling in foundation with granite / trap broken metal 100mm. and
down size & with approved sand including hand packing, ramming, watering,
including cost of all materials and labour w...
Providing and constructing laterite size stone masonry including cost
and conveyance of all materials curing etc complete as per specification
I.S. 3620/1979 having compressive strength not less tha...
Providing and constructing laterite size stone masonry including cost
and conveyance of all materials curing etc complete as per specification
I.S. 3620/1979 having compressive strength not less tha...
Providing and constructing laterite size stone masonry including cost
and conveyance of all materials curing etc complete as per specification
I.S. 3620/1979 having compressive strength not less tha...
Providing and constructing load bearing wall with Solid Concrete blocks
of size 400x150x200mm having block density more than 1800kg/m3
and minimum compressive strength of 4.00 N/mm2 conforming to IS...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of
foundations and other similar works etc. in layers not exceeding 20cm in depth,
consolidating each deposited layer by...
Providing and laying in position Cement Concrete for all Sub structures of
building, Irrigation works, Sub structure works of bridges, Drain works &
other parallel works from 0.50m to 3.50 m height....
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement
including cost of all materials, machinery, labour, cleaning, straightening,
cutting, bending, hooking, laping/welding joints, ty...
Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works
of bridges upto 3.50 m height. The granite/t...
Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to
brick/stone masonry including rounding off cornerswherever required
smooth rendering, providing and removing scaffolding,
Providing and fixing 1st quality ceramic glazed floor tiles conforming to
IS : 15622 (thickness to be specified by the manufacturer ) of approved
make in all colours, shades except burgundy, bottle ...
Providing & fixing factory made PVC Door frame of size 50x47mm with
a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam
sheet metered cut at corners & jointed 2 No.s of 150mm long brack...
Providing & fixing 30mm thick factory made rigid foam Panelled Door
Shutters made from M.S. tube of 19 gauge thickness, size 19x19mm for
stiles and 15x15mm for top & bottom rails, covered with heat ...
Providing edge moulding to 18mm thick Granite stone counters, vanities etc
including machine polishing to edge to give high gloss finish etc. complete
Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992
with necessary screws etc. complete
Finishing walls with Premium Acrylic Smooth exterior paint of required
shade : Old work (Two coats applied @ 1.43 l/ 10 m²) over existing
cement paint surface including preparing the surface after ...
Providing and fixing 18mmthick gang saw cut granite
Providing & fixing glass panes with putty and glazing clips in steel
doors, windows, clerestory windows, all complete with : 4.0 mm thick
glass panes including cost of materials, labour, usage charg...
Providing and fixing aluminium work for doors, windows,ventilators and partitions with extruded built up standard tubular sections appropriate sections and other sections of approved make conforming t...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,
having thermal stability for hot & cold water supply, including all CPVC
plain & brass threaded fittings, including fixing the pipe ...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,
having thermal stability for hot & cold water supply, including all CPVC
plain & brass threaded fittings, including fixing the pipe ...
Providing and fixing C.P. brass stop cock (concealed) of standard design
and of approved make conforming to IS:8931.
Providing and fixing C.P. brass angle valve for basin mixer and geyser
Providing and fixing PTMT Ball cock of approved quality, colour and make
complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball.
Providing and placing on terrace (at all floor levels) polyethylene
water storage tank, IS : 12701 marked, with cover and suitable locking
arrangement and making necessary holes for inlet, outlet an...
Providing and fixing water closet squatting pan (Indian type W.C. pan )
with 100 mm sand cast Iron P or S trap, 10 litre low level white
P.V.C. flushing cistern, including flush pipe, with manually ...
Providing and fixing white vitreous china pedestal type water closet
(European type) with seat and lid, 10 litre low level white vitreous china
flushing cistern & C.P. flush bend with fittings & C.I...
Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass
single hole basin mixer of approved quality and make, including painting
of fittings and brackets, cutting and making good the ...
Providing and fixing mirror of superior glass (of approved quality) and
of required shape and size with plastic moulded frame of approved make
and shade with 6 mm thick hard board backing :
Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for
cold water supply including all uPVC plain & brass threaded fittings
This includes jointing of pipes & fittings with one step ...
Supplying heavy gauge PVC conduit pipe ……mm dia mm thickconfirming to IS 2509 with suitable size bends,metal/PVC junction boxes, adhesive paste etc., and running before concreting the slab. The co...
Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto wall surface complete.
Supplying and fixing PVC/metal conduit Deep junction box.
Supplying And Fixing Metal Fan Box with Round Hook
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase& Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to ...
Medium point above 3Mtr upto 6Mtr from tapping point to outlet
Long point above 6Mtr upto 10Mtr from tapping point to out
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall.1...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.
16Amps one way switch
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...
Supplying and fixing regular MCB distribution boards on wall
Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh
Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring
Digging of trench of 0.6m deep x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc., complete.(As per Civil SR KSRB I-2, P-7)
Supplying and fixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only)
Supplying and fixing modular PBBC/Bakelite straight or slant batten holder with wiring.
Supplying & fixing of feet - PVC Batten with integrated LED tube
Supply of round/square recess/surface mounted rolling type LED Down light with W GU 10 LED Lamp
Fixing all types and all capacities of fluorescent / false ceiling
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
KW1.doc
Tender Document • 0.39 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .