REPAIR MAINT OF MISC WOODEN STEEL FURNITURE INCLUDING PAINTING AND POLISHING AT AF STN MEMAURA

Amount

Taking out old U/S top from table dining 6 persons and supply new top of 18/19mm thick veneered MDF board phenol formal dehyde synthatic resin bonded as aproved by Engr -in-charge, and fixing the same by high class formation cabinet maker including PVC edging of 1.5 mm duly pressed with edge bending machine on the edges of top all as specified and shown on drg with suitable size of steel screw to table dining 6 persons and all as directed by EIC.

-Ditto- all as per item No 01 here in before but from Teapoy -ditto-.

-Ditto- all as per item No 01 here in before but from Peg table -ditto-

-Ditto- all as per item No 01 here in before but from Table centre/Table Varandah -ditto-.

-Ditto- all as per item No 01 here in before but from Table writing FD, Table writing Med and Table 3' x 2' -ditto-.

-Ditto - all as per item No 05 here in before but table 3' x 3' - ditto -

Taking out old U/S legs from table dining FD/Table dining 6 persons and supply and fixing new legs of Ist class hard shisham wood all as shown on drg and as directed by Engineer-in-Charge.

-Ditto- all as per item No 7 here in before but for Teapoy -ditto-.

-Ditto- all as per item No 7 here in before but for Peg Table -ditto-.

-Ditto- all as per item No 7 here in before but for Centre Table -ditto-

-Ditto- all as per item No 7 here in before but for Table writing Med, Table FD and Table 3' x 2' and -ditto-

-Ditto - but table 3' x 3' and - ditto- as per item No. 11 above.

Taking out old U\S long rail from table dining\Table dining 6 persons and S&F new long rail of Ist class (shisham wood) complete all as shown on drgs and directed by Engr-in-charge.

-Ditto- all as per item No 13 here in before but Teapoy -ditto-.

-Ditto- all as per item No 13 here in before but Peg table and -ditto-.

-Ditto- all as per item No 13 here in before but Table writing, Table 3'x2' and -ditto-.

-Ditto- all as per item No 13 here in before but Centre table -ditto-.

Taking out old U\S short rail from Table dining 6 persons and S&F new short rail of Ist class hard (Shisham wood) complete all as shown on drgs and directed by Engr-in-charge.

-Ditto- all as per item No 18 here in before but Tepoy

-Ditto- all as per item No 18 here in before but Peg Table

-Ditto- all as per item No 18 here in before but Centre Table

-Ditto- all as per item No 18 herein before but Table writing FD, Table writing Med, Table 3'x2'

Taking out old drawers from Table writing Med/Table writing FD/Table 3' x2' and S&F new one of same size made of 18 mm thick block board sides back and front bottom of 6mm thick plywood with smooth functioning all as specified and shown on respective drgs or as directed by Engr-in-charge.

Dismantling the following old U/S damaged part\components from Table writing and S&F new one with of same length, size made of 18 mm thick block board and 8mm thick plywood with smooth functioning including two coats of polishing with Touch wood brand polish all as specified and shown on drgs and as directed by Engr-in-charge :-

(a) Door leaf of side rack of table writing

(b) Side portion of side rack of Table writing

(c) Back portion of side rack of table writing

(d) Bottom portion of side rack of table writing

(e) Knob 25mm

Taking out all old damaged and U/S materials worn out from Chair dining CB W/O Arms, including cleaning the dust wax, grease etc from the frames and providing two coats of polishing with touch wood brand polish before canning the items on all portion of Chairs, re-caning the items with approved quality white colour half round from centre with 2.5mm wide cane & 0.3mm thick but border with 3 to 3.2mm wide and 0.4mm thick cane in Godrej pattern weaving all as directed & shown on drg and as directed by Engr-in-Charge.

-Ditto- all as per item No 30 here in before but Chair Writing and -ditto-

-Ditto all as per item No 30 here in before but Chair easy, Chair Easy ENF and -ditto-

Taking out all old U/S materials from seat of chair wooden bottom W/O arms and S&F new seat of ply wood 8mm thick 3 No of ply of BWR grade including polishing one coat of Touch wood brand polish all around the frame of chair all as specified and shown on drawing and as directed by Engr-in-charge.

Dismantling the following old U/S damaged component/parts from repairable frame of chair dinnig CB chair CB w/o arms , and S&F new one with ist class Teak wood as per old one and reassembling the chair in proper manner including two coats of polishing with touch wood brand polish all as specified and shown on drags and as directed by Engineer-in-Charge.

(a) Front legs

(b) Rear legs

(c) Front rail

(d) Side stiffner.

(g) Rear rail

(h) Side rail

All as per item No 34 here in before but from chair writing and chair office writing :-

(a) Front legs

(b) Rear legs

(c) Front rail

(d) Rear rail

(e) Side rail

(f) Side stiffner.

(j) Arms

All as per item No 34 here in before but from chair easy, chair easy ENF and side chair of couch :-

(a) Front legs

(b) Rear legs

(c) Front rail (seat)

(d) Rear rail

(e) Side rail

(f) Top and bottom rail of back

(g) Side rail of top

(j) Arms

Dismantling the following old U/S damaged component/parts from repairable of chair wooden Bottom and S&F new one with Ist class hard wood (Shisham wood) as per old one and reassembling the chair in proper manner including two coats of polishing with touch wood brand polish and all as specified and shown on drawing and as directed by EIC.

(a) Front legs

(b) Rear legs

(c) Front rail

(d) Rear rail

(e) Side rail

-Ditto- all as per item No 58 here in before but from side board :-

(a) Top of side board

(b) Planks of rear side

(c) Side planks

(d) Drawers with knob 25mm dia of mild steel bright finished.

(e) Shelf

(f) Legs of size 45mm x 45mm

Dismantling and re-assembling the following damaged/unservicable part/component of Table bed side by removing/replacement the component/part and S&F new with block board commercial veneered on both side and ply wood 6mm thick back portion of table bed side including two coats of french polish with touch wood brand polish, complete all as specified and directed :-

(a) Side portion of bed side table

(b) Back portion of bed side table

(c) Shelves

Taking out old U/S damaged/broken looking mirror of size 366x1220x5.5mm thick of table dressing ladies and S&F new looking mirror of same size and thickness Make Atul/Modi and change of bottom base of mirror and repairs of drawers as directed by Engineer-in-Charge. including two coats of french polish with touch wood brand polish, rest all as specifiec and shown on drgs.

Taking out old U/S plywood from bed ply top and supply and fixing new ply wood BWP grade 12mm thick IS 710, 7 No of ply of required size and fixed to bed frame by using screw wood steel 25mm apart as directed including two coats of polishing with touch wood brand polish complete all as specified and shown on drg and as directed by EIC Make of ply ISI Marked Make : Archid ply/ Greenply/Centuryply

Taking out old U/S long rail of bed plywood top and providing of new long rail of Ist class hard wood (Shisham wood) same shape and size all as specified and shown on drgs.

Taking out old U/S legs of bed plywood top and providing of new legs of Ist class hard wood (shisham wood) same shape and size all as specified and shown on drgs.

Taking out old U/S bottom rails of bed plywood top and providing of new one bottom rail of Ist class hard wood (shisham wood) required size and shape all as specified and shown on drawings and as directed by Engineer-in-Charge.

Taking out old U/S head wing of bed plywood top and providing of new head wing of same materials shape and size all as specified and shown on drgs and as directed by Engineer-in-Charge.

-Ditto- all as per item No 80 here in before but foot wing -ditto-.

M&L preparing of under mentioned wooden funiture surface by complete removal of polishing by scrapping down with grinding machine before applying new coat of malamine polish,of required shade and as directed by Engr-in-Charge for certain furniture as under

(a) Chair easy

(b) Chair dining

(c) Chair writing

(d) Peg table

(e) Teapoy wooden

(f) Center table

(g) Table writing

(h) Table 3'x2'

(j) Book case FD

(k) Bed ply top

(l) Table Dining 6 pers

(m) Sofa set 05 seater (03 Pieces)

(n) Dressing table gents

(p) Dressing table ladies

(q) Hat Stand

(r) Table bed side

Taking out all old U/S material (Nylon Newar/Plywood) from Charpoy GI pipe and cleaning of dust, wax, grease and replacing the damaged legs/short rails and elbow etc and making good the frame duly tightening all the loose joints of legs/long/short rails and make good the frame in original shape complete all as directed.

Supply only check nut 32mm dia heavy duty ISI marked

Supply only long rail of GI pipe 32mm dia medium grade

Labour for cutting the long rail in short rail legs size threading and fixing the frame of charpoy GI pipe complete all as specified and directed.

Supply and fixing 12mm thick ply wood commercial BWP IS 710, 07 ply plywood (Make-Century ply/greenply/archidply) and fixing same with two Nos of flat iron strip of size 900mm x 32mm x 5mm, bolts, nuts and washers, bolts of size 5x65 mm- 10 Nos round head bolts after drilling the three hole of each long rail and drilling the two hole on each short rail including tightening of loose frame/fixing of loose charpoy GI pipe component to make the frame fit for fixing including two coat of syntetic enamel paint over a coat of redoxide on the the iron strip complete all as per specified and as direction by EIC.

Taking out old U/S material from all type of steel table and supply of new top of 18/19mm thick veneered MDF board phenol formal dehyde synthetic resin bonded as approved by Engr-in-Charge and fixing the same by high class furniture cabinet maker including PVC edging of 1.5 mm duly pressed with eddge bending machine on the edges of top all as directed by EIC

Taking out all old damaged and U/S lever lock from door of Almirah steel large and medium and providing 5 to 7mm brass lever lock with duplicate key Godrej parttern duly tightened with machine screw steel with nuts including welding if required all as directed and specified and shown on drg.

Taking out all U/S damaged clamps from shelves of Almirah/lockers/cup board boards and S&F new clamps as per old one as required for adjusting the shelves as directed by Engr-in-Charge including two coats of synthetic enamel paint complete all as specified.

Taking out old U/S damaged handle from Almirah steel large and medium and S&F new one of same length and size and shape chromium plated cast iron handle of Godrej pattern and shall be fitted by using nut and bolts complete all as directed by Engr-in-Charge.

Taking out old U/S damaged lever lock from drawers and shutter of all type steel table and providing 5 to 7mm brass lock with duplicate key Make Godrej pattern and shall be fitted with machine screw complete all as spcified and directed.

Repair of drawers of Table steel Clk/Officer by making smooth functioning and painting with OG paint to match with existing surface complete all as directed by Engr-in-Charge.

Gas welding with brass rods including preparation of surface by derusting, scrapping and cleaning as required for welding to damaged parts/components of steel surface of furniture article where required to get it serviceable with smooth functioning all as directed by Engr-in-Charge.

Taking out all old U/S materials from seat and back of chair steel varandah cleaning the dust, wax, grease etc from the frame of chair including painting with two coats of synthetic enamelled paint white colour of make- Berger 1st quality all around the frame and recanning with 4 to 5mm wide and 4mm plastic cane in tighten side and 32 to 34 bends on around the frame end recanning with 4 to 5mm weaving side rest all as specified and shown on drg and all as directed by Engr-in-Charge.

Supply and fixing of hand rest of 1st class hard shisham wood duly white painted for chair tube steel varandah all as directed.

Supply & fixing of new rubber shoe/ cap plastic for steel varandah chair.

M&L cleaning, dusting, cobs, grease, wax etc from almirah steel medium with shelves derusted the rusted portion/parts up to the original surface/base by sand paper and painting with two coat of synthetic enamel paint with spray painting gun (one with primer and other finishing coat with synthetic enamel paint OG paint. Make - Asian/Berger inner and outer complete all around as directed by Engineer-in-Charge.

All as per item No 114 here in before but almirah steel large with shelves.

M&L cleaning, dusting etc from chair tube steel with arms derusted the rusted portion/parts of up to the original surface/base by sand paper and painting with two coat of synthetic enamel paint with spray painting gun (one with primer and other finishing coat with synthetic enamel paint OG paint. Make - Asian/Berger inner and outer complete all around as directed by Engineer-in-Charge.

All as per item no. 114 here in before but for chair tube steel w/o arms

Taking out unserviceable damaged seat frame from chair tube steel CB with arms and replace the same with new with 1st class hard wood shisham well finish painted with two coats synthetic enamel paint over a coat of pink primer duly caned in Godrej pattern with white colour cane 2.5 mm wide and 0.3 thick & border with 3 to 3.2 mm wide & 0.4mm thick cane half round all as directed by Engineer-in-charge

All as per item no. 119 here in before but for back frame

All as per item no. 119 here in before but for seat frame to chair tube steel w/o arms

All as per item no.119 here in before but for back frame to chair tube steel w/o arms

Shivam Enterprises

m/s pal associates