Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.2 CrAdmitted-Finance | ₹1.2 Cr | L1 | Admitted-Finance |
| 2 | L2₹1.2 Cr+₹81,888 (0.67%)Admitted-Finance | ₹1.2 Cr+₹81,888 (0.67%) | L2 | Admitted-Finance |
| 3 | L3₹1.3 Cr+₹4.8 L (3.93%)Admitted-Finance 197 SATYA NIKETAN NEW DELHI 110021 | NEW DELHI | DELHI | 110021 | ₹1.3 Cr+₹4.8 L (3.93%) | L3 | Admitted-Finance |
| 4 | L4₹1.3 Cr+₹9.5 L (7.80%)Admitted-Finance | ₹1.3 Cr+₹9.5 L (7.80%) | L4 | Admitted-Finance |
| 5 | Rejected-Technical | - | - | Rejected-Technical Not meeting the NIT eligibility criteria of similar works. |
| Sl No | Description | Qty | Unit | Sri Venkateswaraa Engineering L2 | Dynamic Engineers L3 | SELVA GANAPATHY ENGINEERING L1 | WELTECH ENGINEERS L4 |
|---|---|---|---|---|---|---|---|
| 1.00 | SS304L outer casing:
Supply, fabrication, welding, LPE, passivation of 310 nos. of plugs (100 blanket + 210 fuel)
Actual weight of the finished casing shall be measured. | 15,052 | kg | 760 ₹1,14,39,520 | 800 ₹1,20,41,600 | 756 ₹1,13,79,312 | 740 ₹1,11,38,480 Lowest |
| 2.00 | Reinforcement:
Providing straightening, decoiling wherever necessary bending, cutting, binding and fixing in position steel reinforcement TMT bars of Fe500D grade steel conforming to IS:1786 'SAIL or VIZAG or JSW or TATA or equvalent and tying with approved annealed binding wire of 1.6mm dia in all reinforced cement concrete work at all lifts, including cost of supplying and fixing the spacer/cover blocks of same grade of parent concrete from approved source and binding wire complete all as per specification and as directed by Engineer-in-Charge at all lifts.
Note: The rate shall be including the cost and testing of reinforcement steel at thrid party NABL lab as per QAP. The reinforcement steel shall be procured from dealers with a test certificate as approved by the department.
Actual weight of reinforcement shall be measured. | 5,000 | kg | 129 ₹6,45,000 | 92.2 ₹4,61,000 Lowest | 120 ₹6,00,000 | 225 ₹11,25,000 |
| 3.00 | Concrete:
Providing and laying cast in situ controlled reinforced cement flowing concrete of M45 grade with minimum 450 kg of PPC cement (conforming to IS 1489 Part-1) per cu.m. of concrete & minimum slump flow of 500mm at all levels and lifts mentioned below using 20mm maximum size hard granite machine washed crushed graded stone aggregates, washed crushed stone sand (silt content less than 7% & Zone-II conforming to IS 383), water to cementitious ratio around 0.37, hardened state density not less than 2450 kg/cum, Polycarboxylate ether (PCE) based chemical admixture around 1% (conforming to IS 9103), Non Shrink admixture (Product: Forsroc Cebex 100, Sika Intraplast NN , BASF master flow 150 etc.) as per manufacturer recommendation, weigh batching, mechanical mixing, transporting and placing at all lifts, vibrating, consolidating, finishing smooth of all exposed faces complete all as per specification and including cost of prior trail mixes, testing as per QAP for concrete ingredients and concrete production, and all as shown in drawings and as directed by the Engineer-in-charge for all insitu item.(Reinforcement will be paid for separately). Actual weight of concrete filled inside the SS casing shall be measured and correlated with the empty volume of casing for confirming the density of concrete filled in the casing.
Note:
1. Manufacturer Test certificate (MTC) for cement and chemical admixture procured from dealer/company to be submitted for all concrete related works by the Contractor.
2. The rate shall be quoted on the basis of using minimum cement per cu.m. of concrete mentioned below for relevant grade of concrete. Any upward/ downward variation required to obtain the specified strength will be paid for or deducted at the rate of cement specified. | 22 | m3 | 9,440 ₹2,07,680 | 8,501 ₹1,87,022 Lowest | 10,500 ₹2,31,000 | 40,850 ₹8,98,700 |
Tender Value
₹1.6 Cr
EMD Value
₹3.1 L
Closing Date
30 May 2023, 5:00 pmClosed
PROJECT DIRECTOR
Office of the Project Director, FRFCF-NRB, Kalpakkam
Procurement of raw materials,preparation of fabrication drwgs,fabrication,inspection,supply, delivery and installation of Shield Plugs (concrete filled Steel Tubes with reinforcement) as per technical specifications and drawings at FRFCF Kalpakkam.
2023_BARC_752401_1
BARC/NRB/FRFCF/CSP/2023/ETR004
Open Tender
Metal Fabrication
Item Rate
274 days
FRFCF, KALPAKKAM
Please refer tender document
8 documents required · 8 mandatory
₹0
₹3.1 L
FRFCF,Kalpakkam
16 Aug 2023
10 May 2023
8 Jun 2023
10 May 2023
30 May 2023
25 May 2023
10 May 2023 - 20 May 2023
23 May 2023
Amount
SS304L outer casing: Supply, fabrication, welding, LPE, passivation of 310 nos. of plugs (100 blanket + 210 fuel) Actual weight of the finished casing shall be measured.
Reinforcement: Providing straightening, decoiling wherever necessary bending, cutting, binding and fixing in position steel reinforcement TMT bars of Fe500D grade steel conforming to IS:1786 'SAIL or VIZAG or JSW or TATA or equvalent and tying with approved annealed binding wire of 1.6mm dia in all reinforced cement concrete work at all lifts, including cost of supplying and fixing the spacer/cover blocks of same grade of parent concrete from approved source and binding wire complete all as per specification and as directed by Engineer-in-Charge at all lifts. Note: The rate shall be including the cost and testing of reinforcement steel at thrid party NABL lab as per QAP. The reinforcement steel shall be procured from dealers with a test certificate as approved by the department. Actual weight of reinforcement shall be measured.
Concrete: Providing and laying cast in situ controlled reinforced cement flowing concrete of M45 grade with minimum 450 kg of PPC cement (conforming to IS 1489 Part-1) per cu.m. of concrete & minimum slump flow of 500mm at all levels and lifts mentioned below using 20mm maximum size hard granite machine washed crushed graded stone aggregates, washed crushed stone sand (silt content less than 7% & Zone-II conforming to IS 383), water to cementitious ratio around 0.37, hardened state density not less than 2450 kg/cum, Polycarboxylate ether (PCE) based chemical admixture around 1% (conforming to IS 9103), Non Shrink admixture (Product: Forsroc Cebex 100, Sika Intraplast NN , BASF master flow 150 etc.) as per manufacturer recommendation, weigh batching, mechanical mixing, transporting and placing at all lifts, vibrating, consolidating, finishing smooth of all exposed faces complete all as per specification and including cost of prior trail mixes, testing as per QAP for concrete ingredients and concrete production, and all as shown in drawings and as directed by the Engineer-in-charge for all insitu item.(Reinforcement will be paid for separately). Actual weight of concrete filled inside the SS casing shall be measured and correlated with the empty volume of casing for confirming the density of concrete filled in the casing. Note: 1. Manufacturer Test certificate (MTC) for cement and chemical admixture procured from dealer/company to be submitted for all concrete related works by the Contractor. 2. The rate shall be quoted on the basis of using minimum cement per cu.m. of concrete mentioned below for relevant grade of concrete. Any upward/ downward variation required to obtain the specified strength will be paid for or deducted at the rate of cement specified.
Sri Venkateswaraa Engineering
Dynamic Engineers
WELTECH ENGINEERS
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 1.46 MB
GCC2014.pdf
Additional Documents • 1.50 MB
TenderDocument.pdf
Tender Documents • 7.65 MB
Forms.pdf
Additional Documents • 1.58 MB
BOQ_791052.xls
BOQ • 0.23 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .