ADDITION ALTERATION TO DOG KENNEL, PROVISION OF INTERLOCKING PAVER BLOCK AT BPI, PROVISION OF DEFICIENT EXHAUST FANS AT CERTAIN MD ACCN AT AF STN NAL

Demolition of cement concrete (unreinforced) of in ground floors and pavings n exc 15 cm thickness and removing the rubbish outside the defence land otherwise specifically provided including floor finishes etc. complete all as specified and directed.

M&L for 25 mm thick Cement concrete 1:2:4 type B0 using 12.50mm graded stone aggregate over sub base correcrion floors, surface fair finished and even and rough to receive floor finishes etc. complete all as specified and directed.

Dismantling of wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off premises complete all as specified and directed.

M&L for glazed ceramic coloured wall tiles 450x300x7mm thick on vertical surfaces such as dados set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles over and including 10 mm thick backing coat in CM 1:4 complete all as directed by Engineer-in-Charge.

M&L for machine cut Kota Stone slab (similar shade) as in flooring / landing/treads (single piece) of stairs , 20-25 mm thick over and including 15mm thick cement screed bed in CM 1:4 , laid and jointed with grey cement slurry mixed with pigments to match the shade of the slab and including rubbing and polishing and making grooves in treads ( as required ) complete all as specified and as directed.

Demolition of Reinforced cement concrete of any description and in any position not otherwise specifically provided for etc. complete all as specified and as directed.

M&L for reinforced cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in slabs, supported on walls, beams and columns in floors, roofs, landings balconies canopies, deck slabs and in shelves and the like etc. complete all as specified and as directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports overhangs, etc also splays between floors and beams etc. complete all as specified and directed

S&F mild steel TMT bars 10mm dia and over, cut to length & bent to shape required including cranking, bending spirally for hoping for column, hooking ends & binding with and including mild steel wire not less than on 0.9mm dia or securing with clips etc, complete all as specified and directed.

S&F mild steel TMT bars 5mm dia and over upto and including 10mm as in stirrups, spacers, binders etc., cut to length & bent to shape required including cranking, bending spirally for hoping for column, hooking ends & binding with and including mild steel wire not less than on 0.9mm dia or securing with clips etc, complete all as specified and directed.

Dismantling of wrought iron or mild steel work of any description not ohterwise provided for complete all as specified and directed.

S&F MS plain plates, square cut, with riveted, bolted or welded attachment FE-410-W (Gde-E-250) quality A etc, complete all as specified and directed.

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n.exc 5cm long, diameter of neck in 5 to 10mm etc, complete all as specified and directed.

S&F MS Framed work such as grills, gratings,handrails, staircase, cooler stand etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk water tanks and similar work including all necessary drilling or cutting holes in brick/ concrete surfaces and making good, welding work, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165, etc, complete all as specified and directed.

M&L for steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes confirming to IS 1161-1979 grade -st-240 etc, complete all as specified and directed.

S & F welded steel wire fabric to steel members weight n exc 4 kg per sqm etc, complete all as specified and directed

M&L for preparation of new steel surfaces of any description, not otherwise described over 10cm width or girth and applied two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer etc, complete all as specified and directed by Engineer-in-charge.

Dismantling plain or corrugated steel sheeting any guage/ thickness incl Nainital pattern or similar pattern roof covering in patches complete all as specified & directed.

S & F Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Taking down chowkhats or frames with shutters n exc 1.50 Sqm each with shutter without taking off shutters from the frame etc, complete all as specified and directed.

Taking down chowkhats or frames with shutters exc 1.50 Sqm and n.exe 4 sqm each with shutter without taking off shutters from the frame, etc, complete all as specified and directed.

Supply and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for frames of doors, windows,ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.

Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws,rollers & dust proof brush for sliding door / window complete all as specified and as per the directions of Engineer-in-Charge.

S & F 4.80 mm thick sheet glass of ordinary quality plain /tinted and including glazing with suitable rubber beads etc complete all as specified.

Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anode coating of grade AC15) of approved design/ pattern, with approved standard section and fixed to the existing window frame with CP. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer in-charge.

S & F 3 mm thick high quality, durable acrylic panel sheet and glazing with rubber beads, clips etc complete all as specified and directed.

S&F 100 mm long butt hinges type B-22 extruded aluminium alloy with galvanised mild steel hinge pin complete all as specified.

S&F 150 mm long aluminium alloy anodised handles, fabricated type polished fixed with stainless steel screws screws complete all as specified and directed.

S&F 200 mm long aluminium anodized barrel tower bolt of extruded section complete all as specified.

S&F door closer hydraulically regulated aluminium body, designation No 2, universal type, suitable for door shutters of size 701 to 850 mm in width and of weight between 36 to 60 Kg, complete all as specified and directed.

S & F in repair steel mortice lock vertical type 100mm, 4 levers complete all as specified and directed.

Supply and fixing 60x 40 mm door stopper hanging type, consisting two leg aluminium anodised natural shade matt finish aluminium rod with rubber shoe complete all as specified and directed.

Taking down GI pipe medium grade 15 mm dia with all fitting, complete all as specified and directed.

S&F GI pipe medium grade 15 mm dia with all fitting laid in floor or fixed in walls complete all as specified and directed.

M&L for PVC (SWR) floor trap with grating outlet dia 75 mm in repair , plain including jointing with solvent cement etc, complete all as specified and directed. Note : Cost of grating is included in this item.

S&F in repairs 75 mm dia Stainless steel grating with hole, complete all as specified.

S & F in repair stop valve quarter turn 15mm bore fancy type chromium plated with long shank and cup (concealed type) screwed down high pressure, screwed both ends for iron pipe or for unions etc, complete all as specified and directed.

S&F 15 mm dia 45 cm long PVC connection with brass nuts (Hot and cold ) and washers etc.complete all as directed by Engineer-in-Charge.

Dismantling water tanks capacity exc 250 ltrs but n exc 500ltr and removing to store etc.complete all as directed by Engineer-in-Charge.

S&F Rotational moulded polyethylene water storage tanks of 500 ltr capacity (cylindrical vertical with closed top)with three layers white colour including hoisted and fixed in position all as specified in SSR Part I etc.complete all as directed by Engineer-in-Charge.

S&F 20mm PTMT nipple suitable for HDPE water tank (minimum weight 15 mm-38gms/20mm-45gms/25mm-65gms) complete all as specified .

S&F ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe 20 mm dia of make prayag or equivalent.

Demolition of brick or stone masonary built in cement mortar including all quoins, arches, pillar etc. complete all as specified and directed.

Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation,etc or for shafts wells, cesspits, manholes, pier holes etc n.exc 10 sqm on plan and n.exc 1.5 m in depth and getting out in soft/loose soil, complete all as specified and directed.

M&L for plain cement concrete (1:4:8) type D2 using 40mm graded stone aggregates as in foundation, complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. etc, complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point etc, complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for 15mm thick in CM (1:4) rendering on brick or concrete surfaces finished even and smooth (without using extra cement) etc.complete all as specified and directed.

M&L for 15 mm thick cement plaster in (1:6) on fair faces of brick work finishing even and smooth without using extra cement, complete all as specified and directed.

Supply only integral water proofing compound etc..

M&L for preparation of newly plastered surface and applying two coats of weather exterior emulsion paint over and including a coat of primer, tint in camoflauge pattern to match existing surface complete

M&L for preparation of newly plastered/ concrete surfaces and applying two coats of oil bound distemper over a coat of primer over two coats of acrylic based wall care putty complete all as specified and directed.

M&L for preparation of old decorated surfaces of walls (plastered or un plastered) including cornices, pilaster etc by brooming down with steel wire brushing, scrapping down, smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc including filling the depressions with cement based wall care putty and applying one coat of oil bound distemper complete all as specified and directed.

M&L for preparation of old decorated surfaces of ceiling/bottom of chajja and similar suspended work (plastered or un plastered) including complete removal of existing treatment including cornices, plaster etc by brooming down with steel wire brushing, scrapping down, smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc including filling the depressions with cement based wall care putty and applying two coats of whitewash all as specified and directed.

M&L for preparation to old decorated surfaces of wall including washing rubbing down and stopping of distempered or painted surfaces including all cornices, pilasters etc( plastered or unplastered) etc and applying one coat of acrylic exterior emulsion paint of approved colour/shade as in camouflaging pattern complete all as specified and directed by Engr-in-Charge.

M & L for preparation of old decorated surfaces of walls and applying one coat of white wash complete all as specified.

M&L for Preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed.

Form work for concrete flats teads exc 5 cm but n exc 10cm wide rough finished, complete all as specified and as directed

M&L for PCC (1:2:4) type B1 (20mm graded stone aggregate )as in lintels upto 1..5 m clear span, cills, hold fast for door, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, complete all as specified and as directed

Material and labour 75mm thick PCC 1:4:8 type D-2 ( using 40mm graded stone aggregate) thick as in sub base of floor surface finished even & rough to receive floor topping complete all as specified and directed.

M&L for sand cushion (Tibba Sand), filling under floors/tiles/paver blocks or in foundations including watering and consolidation complete all as specified and directed.

M&L for precast concrete coloured interlocking paver block rubber moulded, vibratory finished of approved shape and size confirming to IS 15658-2006 of 80 mm thickness with grey cement and no pigment, M-40 Grade design complete all as specified and directed

Material and labour PCC 1:2:4 type B-1 ( using 20mm graded stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edge complete all as specified and directed.

Taking down carefully copper /aluminium point wiring light/fan, socket or power point /AC point complete including fittings such as switches, sockets, ceiling rose, bell push, bell buzzer, lamp holder bracket, fan regulator, enclosure, tube light fitting removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditioning separately ) and making good disturbed surfaces of walls,floor ,etc complete all as specified and as directed.

One fan/light/bell point controlled by one switch, with cables 1.5 sqmm size

One 3 pin socket outlet, 5/6 amps on independent board, with cables 1.5 sq.mm size

One 3 pin socket outlet, 5/6 amps on same board, with cables 1.5 sq.mm size

S&F in repair modular type 2/3 pin shuttered type 5/6 A socket, conforming to IS 1293: 2005 complete all as specified in IS 732: 2019 and directed by the Engineer-in-charge.

S&F in repair modular type 5/6 A 1-way SP switch conforming to IS 3854: 2012 with finger-proof terminal complete all as specified in IS 732: 2019 and directed by the engineer-in-charge.

S&F in repair ceiling rose, surface bakelite, 65 x 50 mm, three terminals complete all as specified and as directed.

S & F Modular cover plate with frame of following modules complete all as specied and directed. Note- Modular switches, sockets and cover plate with frame shall be of same make and model.

8 Module

6 Module

3 Module

2 Module

S & F rectangular modular metal flush mounted sunken block of following modules suitable for mounting modular switches & sockets complete all as specified and directed

8 Module

6 Module

3 Module

2 Module

Supply and fixing stepped type electronic fan regulator , SP 230 Volt 100/120 watt complete all as specified and directed.

S&F energy saving decorating box type batten light fitting 230 volts surface mounted complete with high efficiency glare free light LED lamp 20 watt(4 Feet) blue coloured end caps with all accessories, pre- wired,aluminium housing,polycorbonate difuser integrated heavy duty electronic driver having THD < 10% including providing flexible copper wire twin core cable complete all as specified and directed by Engineer in charge.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) with complete all as specified and directed.

Taking down carefully existing sub main wiring on wall (different sizes) and making concealed by refixing/ drawn through including chasing cutting in any type of masonary including suitable size of non-metallic PVC /Metallic conduit fittings accessories and making good the disturbed surface match with the existing all as specified and directed.

Supply and laying sub main wiring complete with 03 runs ( phase, Neutral & Earthing colour code) of single core 10 sqmm fire retardant low smoke (FRLSH) PVC insulated copper conductor cable multistranded and sheathed LT 1100 V grade drawn through and including concealed non metallic PVC conduit minimum dia 20mm dia ISI marked and accessories surface fixed on wall /floor etc all as specified. Note:- 03 runs of cable and 01 run of PVC conduit shall be considered as one unit for measurement purposes.

Taking down carefully Distribution board SPN/TPN of any sizes & any capacity by unscrewing including MCB SP/SPN from existing location all as directed.

Supply and fixing MCB DB single pole and neutral 240 volt SPN 12 way with 200 Amps rated bus bar double door type complete all as specified and directed. Note : Rate quoted shall deemed to be including for cutting existing wall for fixing DB in concealed making connections of sub main wiring (incoming and outgoing) with suitable size of cable lugs etc. and making good the existing surface.

Supply and fixing MCB SPN 32 Amps 240Volts, Breaking capacity 10 KA 'C' curve complete all as specified and directed.

Supply and fixing MCB SP 5-32 Amps 240Volts, Breaking capacity 10 KA 'C' curve complete all as specified and directed.

Supply and fixing vertical TPN DB double door, IP 45 protection with powder coated enclosure 4 way insulated busbar assembly including MCCB 4 pole, 415 V, 100 16 kA - 01 No complete all as specified and directed.

M&L for Earthing complete with GI earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.50 Mtr below ground level. The earth plate to be connected with earth lead of 4 mm dia galvanised iron or steel wire all as shown in electrical plate no 3, connected to the earthing test point all as specified and directed.The GI earthing wire to be protected by galvanised iron pipe 15 mm bore (medium grade) up to ground level and there after with 15mm dia HDPE pipe up to test point. Earthing shall be include with providing funnel with 20mm bore galvanised iron pipe (light grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) up to 90 cm all around earth plate further filled with 60 cm thick Tibba sand and 2nd layer with 30 cm of Magnesium sulphate powder (compact thickness ) , 3rd layer with tibba sand up to the ground level. Earthing shall also be include for providing concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded stone aggregate), 50mm thick precast RCC (1:2:4) cover slab using 20mm graded stone aggregates (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work including taking out old unsv earthing from existing location with complete all as specified and directed.

S&F LED street light 45 watt 230 volts pressure die cast aluminium housing, heat resistant toughened glass with frame, IP protection IP-65 batter optics for uniform distribution having surge protection 10 KV, sealed driver including GI Bracket 40mm and with complete all as specified and directed .

Supply and fix desert cooler electric driven (single phase), having nominal air flow capacity minimum 4000 CUM per hour (or nearest size) (GI sheet body) on equal iron frame structure complete with GI tank capacity 60 ltr approx, including MS angle iron stand made of 50x50x6 mm fixed on wall near window include two coat of synthetic enamel black paint over a coat of red oxide on angle iron frame complete, all as specified and directed .

Supply and fixing Plug top 5/6 Amp of suitable for Refrigerator/Desert Cooler and water cooler sockets complete all as specified and directed by Engineer-in-Charge.

Supply, laying and testing cable XLPE Insulated , screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm, 4 core including taking out existing unsv cable with complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated , screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm, 4 core including taking out existing unsv cable with complete all as specified and directed.

Material and labour for tibba sand for filling in trenches below and around underground cables for cushioning of cables etc, complete all as specified.

S&F sub class B bricks having minimum compressive strength 75 Kg/ Sqcm laid in trenches for cable protection etc complete all as directed by Engineer-in-Charge.

S&F exhaust fan, steel body AC single Phase , 230V of size 300mm sweep with blades and frame and louvers, complete all as specified and directed by Engineer-in-Charge.

S&F ceiling rose surface Bakelite 65 x 50 mm three terminals, complete all as specified and directed by Engineer-in-Charge.

S & F Modular cover plate with frame of 1 module complete all as specified and directed. Note- Modular switches, sockets and cover plate with frame shall be of same make and model.

S & F rectangular modular metal flush mounted sunken block of 1 modules suitable for mounting modular switches & sockets complete all as specified and directed

S & F modular type 6 A 1-way SP switch conforming to IS 3854: 2012 with finger-proof terminal complete all as specified in IS 732: 2019 and directed by the Engineer-in-charge.

Material and labour for Cutting, Opening through existing brick walls of 300 mm dia to be for exhaust fan/ventilating fan and finished with the disturbed wall by cement plastering and cement mortar 1:4 and match with the existing surface, complete all as specified and as directed.

Please Enable Macros to View BoQ information