Major Repair of Girls Higher Secondary School Sonwar.

Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge.

Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: 1:3:6 or richer mix (i/c equivalent design mix)

Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge n cement mortar.

Dismantling roofing including ridges, hips valleys and gutters etc. and stacking the material within 50 meters lead of Fibre sheet complete.

Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 meters lead.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead for thickness of tiles 10mm to 25mm.

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared.

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil.

Supplying and laying of Nallah Dry stone soling hand packed tightly including ramming, watering and filling of interstices including all carriages complete.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size).

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Steel reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete. Thermo mechanically treated bars of grade. Fe-500D or more complete.

Providing and laying mat finished vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand)using spacers of required size including grouting the joints with epoxy of required shade etc. complete size of tiles 1200mm x 600mm (Kajaria, Somany or equivalent).

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes

Steel work welded in built up sections / framed work, including cutting hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc as required in gratings, frames, guard bar, ladder, railing, brackets, gates and similar works labour charges only with available material.

Centering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases for columns.

Providing and fixing of colour coated sheet of required pattern in soffits as directed by EIC including scaffolding, frame work of imported and dismantling of existing damaged soffits complete job.

Providing and fixing of Hi-rib / corrugated pattern polycarbonate / FRP sheet 1.5mm -2mm thick for roof ISO / ISI certified of reputed brand to be fixed with self driven screws including cost of all scaffolding, wastages, carriages and all sorts of headloads involved complete.

Chequerred precast cement concrete tiles 22mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing, cleaning and curing complete, on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) . 11.29.1 Light shade using white cement.

Pointing on stone work with cement mortar 1:3 (1 cement: 3 fine sand) (Flush /Ruled pointing)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work.

Finishing walls with excel paint (two or more coats) at all locations including scraping and preparing of surface complete job.

Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge.

Providing and fixing of Electro coated aluminium work including glazing ACP in partition / Door openings and necessary hardware fittings including leaf spring machine with extruded built up tubular sections / appropriate Z sections and other sections of approved make conforming to IS 733 and IS 12785, fixed with rawlplugs and screws including necessary filling up of gaps at junctions, at tops, bottoms and sides with required PVC / neoprene felt etc all complete as per directions of Engineer-in-charge for fixed portion, Electro coated aluminium minimum thickness of coating 50 microns) complete including hardware fittings as per approved drawings & sample to be approved by the EIC complete; all inclusive.

Providing and fixing CP Bib cock of standard design and of approved quality and make complete sample to be approved by EIC.

Providing and fixing CP pillar cock of standard design and of approved quality and make complete sample to be approved by EIC.

Providing and fixing CP Angle valves 15 mm dia of approved brand with CP wall flange of approved quality and make complete including cutting and making good the walls sample to be approved by EIC.

Providing and fixing of PVC connections / CP tubes of required size 600-750mm size and of standard quality complete.

Providing and fixing P.V.C low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete: 10 liter capacity -White

Providing and fixing PVC waste pipe of required size and standard quality complete.

Carriage of materials from source to site of work by mechanical means.

a) Stone aggregate above 40mm nominal size for an avg. lead of 20 Kms.

b) Stone aggregate below 40mm nominal size for an avg. lead of 20 Kms.

c) Sand for an avg. lead of 20 Kms.

Please Enable Macros to View BoQ information