WBPWD/EE/HHDI/NIT-05/Sl-6

Repairing Pot-holes with Bituminous Macadam (Grading - II, for compacted thickness of upto 75mm) Filling Pot Holes with Bituminous Macadam using Mobile Hot Mix plant (6-10 TPH) with approved crushed aggregates of specified grading premixed with bituminous binder @3.4% by wt. of the total mix, transported to site and laid in the pot hole prepared before hand by cutting the edges to get a firm vertical face and by removing all the failed and loose materials including dust and applying tack coat evenly on the sides and on the surface as per specification, rolling the filled depression with 8-10 tonne smooth wheeled roller to achieve the desired compaction, including the cost and carriage of stone aggregates and bitumen, hire charges of machinery and equipment, cost of fuel and lubricants and wages of all operational staff, quality control except the cost of tack coat complete as per direction of Engineer-in-charge. Payment to be made on the basis of the loose net volume of the stone aggregates used in the work. (Tack Coat considered separately)

Tack Coat Providing and applying tack coat with Cationic bitumen emulsion (RS1) complying with IS:8887 using emulsion pressure distributor on the prepared bituminous/granular/cement concrete pavement surface cleaned with mechanical broom and high pressure air jet (Reference to MORT&H's specification clause 503). (i) On Bituminous Surface (Using Bitumen Emulsion (Rs-1, Packed) @ 0.250 kg per sqm.)

Close Graded Premix Surfacing/Mixed Seal Surfacing (Reference to MORT&H's specification clause 508). Mechanical means using HMP of appropriate capacity not less than 75 tonnes/hour. Item Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.09 mm (Type-A) or 13.2 mm to 0.09 mm (Type-B) aggregates using viscosity grade bitumen of suitable approved grade to the required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a Smooth wheeled roller 8-10 tonne capacity, and finishing to required level and grade. ii) Type-B (rainfall less than 150 mm/year).

Supplying and mixing stable anti- stripping agent of approved quality conforming to Table -A 5 - 1 of Appendix-5 of specification for Road & Bridge Works of MORT&H(Rev-4) to the binder @ 0.5% to 1% by weight of binder (depending up on size & stripping value of the aggregates ) and allowing 15 to 30 minutes of circulation or stirring in the hot bitumen tank to ensure a homogeneous mix of binder and anti- stripping agent for different bituminous works as per Technical Specifications in given n Appendix - 5 of specification for Road & Bridge Works of MoRT&H (Rev-5) and direction of Engineer-in-Charge complete.

Add GST @ 18%