A/R to various building (Residential) in Kothi No. 1,3 in Officer Colony and House No. 27 Minar Road Karnal in Distt. Karnal for the year 2020-21

Amount

Terracing consisting of tiles 22.86 cm x 11.43 cm x 3.81cm laid over 87.50 mm mud filling on a layer of 25 mm mud plaster and an other layer of mud mortar for laying the tiles, including two coats of bitumen laid hot at 1.65 Kg. per sqm on top of RCC the slab including grouting with cement sand mortar 1:3 and top surface to be left clean etc. (HSR 13.13).

Tile terracing with one layer of tiles, 22.86 cm x 11.43 cm x 3.81cm laid dry over a layer of mud mortar including grouting with cement sand mortar 1:3 and top surface to be left clean (HSR 13.14).

Providing and embedding 100 mm dia H.C.I. rain water without ears I.S.I. Mark pipe in cement mortar during masonry work (HSR 13.43)

Providing and laying average 6mm thick POP Coating on walls, Ceiling, beams and lintels etc complete in all respects as approved by the Engineer-in-Charge. (HSR 13.94)

Base course of floors consisting of 100mm thick cement concrete 1:8:16 and 100 mm sand or stone filling (HSR 14.1)

Conglomerate floor 40 mm thick cement concrete topping 1:2:4 (HSR 14.9)

Terrazzo skirting or dado or on wall face rubbed and polished to a granolithic finish under layer 12 mm thick cement coarse sand plaster 1:3 and top layer as specified below (a) with grey cement (i) 18 mm thick with top layer 6 mm thick with white marble Makrana/Narnaul chipping of size 1 mm to 4mm laid in cement marble powder mix in the ratio of 3:1(3 parts of cement and one part of marble powder )by weight in proportion of 4:7 (4 parts of cement marble powder mix :7 parts of white marble chips by volume complete. [HSR 14.26(a)(i)]

Extra over item No. 14.26 if under layer 15 mm thick cement coarse sand plaster 1:3 instead of 12 mm thick cement coarse sand plaster 1:3 is provided. (HSR 14.28)

Providing and fixing vitrified tiles of size 600 x 600mm of approved make in flooring laid in any pattern as specified over base of 20mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade to tiles. Note:- Tile shall be of premium quality (first quality) of reputed manufacturer like NITCO, KAJARIA, SOMANI, ORIENT, JOHNSONS & RAK. (HSR 14.89)

Providing & fixing 1st quality ceramic glazed wall tiles confirming to I.S. 15622 (thickness to be specified by the manufacturer) of approved make in all colors, shades except burgundy, bottle green, black of any size as approved by Engineer-In-Charge in skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:3 coarse and jointed with grey cement slurry, including pointing in white cement mixed with pigment of matching shades complete. (HSR 14.92) a) Size of ceramic Glazed tiles 200 x 300 mm

12 mm thick cement plaster 1 : 4 on walls ( HSR 15.5 )

12 mm thick cement plaster 1:5 on walls (HSR 15.6)

12 mm thick cement plaster 1:6 on walls [HSR 15.7]

15 mm thick cement plaster 1:6 on rough side of single or half brick wall (HSR 15.12)

10 mm thick cement plaster 1:4 on under side of ceiling (HSR 15.52)

Cement pointing 1:2 deep variety on brick and tile work (HSR 15.60)

Striking joints in lime or cement on brick and tile walls [HSR 15.69(a)]

Cement pointing 1 : 2 flush on flat brick flooring. (HSR 15.71)

Painting two coats with synthetic enamel paint in all shades on old wood-work or metalic or plastered or concrete surfaces to give an even shade including rubbing down old paint. (HSR 16.5)

Painting two coats with readymixed paint in all shades on old wood work to give an even shade including rubbing down old paint. [HSR 16.6]

Oiling wood work with raw linseed oil and water. .[HSR 16.41]

Spirite polishing one coat on old work. [HSR 16.45]

White washing one coat or subsequent coat. (HSR 16.46)

Preparation of plastered surface for oil bound distemper including sand papering the surface, applying one coat of linseed oil, and filling with approved quality filler, consisting of white lead , linseed oil,varnish and chalk mitti including finishing the surface to the required finish complete. (HSR 16.52)

Distempering with washable oil bound distemper (of approved manufacture) two coat on old distempered work (HSR 16.60)

Providing two coats of exterior acrylic emulsion paint (1st. Quality) [HSR 16.79 (b)]

Supplying and filling glass panes with deodar wood moulding:- (b) 3mm thick (glazing area above 9 sqdm. But upto 55 sqdm of each pane) (HSR 17.24 b)

Supplying and filling glass panes with deodar wood moulding:- (c) 4mm thick (glazing area above 55 sqm, but upto 84 sqm of each pane) (HSR 17.24 b)

Kail wood door and window shutters, panelled, glazed, or glazed and panelled including iron hinges, screws, chocks/cleats and stops etc. complete fixed in position (excluding the cost of tower bolts and handles, but including the labour for fixing the same (a) 40mm thick (12mm thick kail wood panel) [HSR 17.25]

Supplying and fixing glass panes with moulding of commercial hard wood such as hollock, champ, chikrassy and chaplash etc. ( Non coniferous timber other than teak, conforming to I.S. specification No. 1003 kiln seasoned )- ( c) 4 mm thick ( glazing area above 55 sq dm but upto 84 sq dm of each pane) [HSR 17.36( c)]

Factory manufactured panelled door or glazed window, shutters of commercial hard wood, such as hollock, champ, chikrassy and chaplash, etc.,(non-coniferous timber other than teak, conforming to I.S. specification No. 1003, kiln seasoned), with 100 mm wide vetical styles, 150 mm wide lock rail, 200 mm wide bottom rail and 100 mm wide other rails, with panels of 15 mm thick, tongued and grooved of commercial hard wood and including cost of iron hinges, screws, chocks/cleats, stops, nails etc., complete, fixed in position (execluding the cost of any fittings, other than specified above, but including labour for fixing the same in position) [HSR 17.90 (b)(-)Note (i) under item No. 17.18] 35mm thick

Providing and fixing in position best indian make (to the approval of the Engineer-in-Charge) European type water closet suit with non-concealed 'P' or 'S' trap with or without vent and all other necessary fittings as fully described in item no. 30.3 above [HSR 30.4 (i)]

Providing and fixing in position best Indian make bevelled edge 5.5mm thick mirror mounted on asbestos sheet ground fixed in position by means of 4 Nos. chromium plated brass screws and washers complete including cutting and making good the walls etc. [HSR 30.71] a) Indian make i) 600 x 450mm

Providing and fixing in position 15mm i/d C.P.bras bib cocks of best quality (as required by the Engineer-in-charge). [HSR 30.75] a) bib cock long body

c) Bib cock

Providing and fixing in position C.P.brass stop cock (as approved by the Engineer-in-charge) [HSR 30.76] a) 15mm stop cock ii) Concealed stop cock with flange

Sh. Navdeep Sharma