REPAIR/REPLACEMENT OF ROOF PLASTER JOINERY SUNKEN TREATMENT PLUMBING AND ALLIED WORKS AT DTF VTF 416 ENGR BDE ICC UNIT AND ADJACENT AREA UNDER AGE B/R-II OF GE(NORTH) MEERUT CANTT

Amount

Demolition of brick work or stone/boulder masonary built in cement mortar incl all quoins arches pillars etc.complete all as specified & directed

M&L brick work with sub class old size bricks straight or curved on plan exc 6 m mean radis built in CM 1:6.complete all as specified & directed

M&L brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4 complete all as specified & directed

Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) n.exc 1.50 Sqm each complete all as specified & directed

Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) exc 1.50 Sqm & n exc 4 Sqm each complete all as specified & directed

Taking down Shutters of any description exc 1 sq. m but n exc 2 sqm each complete all as specified & directed

M & L for Anodised aluminium Powder Coating (minimum thickness of powder coating 50 micron) frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified & directed

M & L for Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges-3, anodised aluminum snap beading screws, tower bolt, etc. complete all as specified & directed

S&F 6mm thick Prelaminatd particle board interior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified & directed

S&F Glazing with sheet glass, 4.8mm thick, ordinary quality and glazing with oil putty and glazing pins in each pane complete all as specified & directed

S&F powder coated anodised aluminium ventilators with sash bars, aluminium sections weighing 0.55 Kg/mtr (minimum) incl stainless steel mosquito proofing wire mesh fixed with , clips, frame , necessary joining cleats, glazing clips, neoprene rubber gasket with aluminium beading screws suitable anodised fittings such as hinges, handles including powder coated anodised aluminium frame, grill with one or more rebates including S&F 4.00 mm thick frosted glass complete all as specified and directed.

S&F powder coated anodised aluminium windows sliding type (3 shutter type) with sash bars, aluminium sections weighing 0.55 Kg/mtr (minimum) incl stainless steel mosquito proofing wire mesh fixed with , clips, frame , necessary joining cleats, glazing clips, neoprene rubber gasket with aluminium beading screws suitable anodised fittings such as hinges, handles including powder coated anodised aluminium frame, grill with one or more rebates including S&F 4.00 mm thick plain glass complete all as specified and directed.

S & F for 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels,commercial type on both sides face is covered with decorative face veneer with lipping/frame to match complete all as specified & directed

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube as specification and drawing in SSR complete all as specified & directed

S&F factory made solid panel PVC door shutter 30mm thick ( style) consulting of frame MS tubes fro top or bottom rails MS frame shall be covered with heat moulded plain clour PVC 'C' channel having a PVC sheet strips of 20mm with stick in side with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on other side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded sealed to bve sides and rails with suitable PVC sheet beading and joined together with solvent cement as per specification and drawing in SSR complete all as specified & directed

S&F 100mm stainless steel butt hinges medium weight cold rolled mild steel and fixed complete all as specified & directed

S&F 150mm alum anodised barrel tower bolts of extruded section and fixed complete all as specified & directed

S&F 250mm size alum alloy anodised sliding door bolt with hasp staple ( bolt type ) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified & directed

S&F 150mm size aluminium handles, cast type anodised complete all as specified & directed

M&L for Preparation of new wooden surfaces over 10 cm width or girth not otherwise described and applying two coat of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

S & F in repair hollow PVC Wall Lining consisting of 5mm thick printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and complete all as specified & directed

Hacking out old broken glass, glazing sheet (any thickness, size, quality or description) not exc 0.5 sq.m from metal frame in any position including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed.

M&L for 3mm thick figured glass, pin head type and glazing with oil putty in each pane complete all as specified and directed.

S&F Glazing with sheet glass, 3mm thick, ordinary quality and glazing with oil putty and glazing pins in each pane complete all as specified & directed

M&L for Preparation of old painted wooden surfaces over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and directed.

M&L for Preparation of old painted steel or iron surfaces over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

M&L Framed work such as grills, angle, hollow sections, grating etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, railings and similar work confirming to Fe-290 Grade E-165, complete all as specified & directed

M&L for preparation of new surfaces of steel and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F in repairs galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staple complete all as specified & directed

S&F in repairs aluminium sliding bolt 300 long bolt type with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified & directed

S&F in repairs heavy weight SS butt hinges 100mm in size complete all as specified and directed.

S&F in repairs stainless steel barrel tower bolt with bright bolt 200 mm long complete all as specified & directed

S&F in repairs aluminium (Die cast) body, Door closer, hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as specified & directed

S & F in repairs 25mm Stainless steel decorated curtain rod with braket, fanial at end and ring complete all as specified and directed.

Taking down of cement plaster of any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc complete all as specified & directed

M & L for 15 mm thick rendering in CM 1:4 on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified & directed.

M & L for 15 mm thick rendering in CM 1:6 on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified & directed.

M&L for Rendering 5 mm thick on fair faces of concrete surfaces, finished even and smooth without using extra cement on ceiling in cement mortar (1:3), complete all as specified & directed

M & L for preparing new plaster surface by washing rubbing down and stopping of distempered and painted surface and applying two coats of distemper oil emulsion over a coat of primer complete all as specified & directed

M & L for preparing new Plastered or unplastered surfaces of ceiling and applying three coat of white wash complete all as specified & directed

M & L for preparing new Plastered or unplastered surfaces of walls and applying two coat of white wash complete all as specified & directed

M & L for preparing old Plastered or unplastered surfaces of walls and applying one coat of white wash complete all as specified & directed

M & L for preparing old Plastered or unplastered surfaces of ceiling and applying one coat of white wash complete all as specified & directed

Demolition of reinforced concrete of any description and any poisition not otherwise specifically provide ( reinforcement cut to faciliatate demolition) complete all as specified & directed

M & L for precast reinforced cement concrete 1:2:4 type B1 (using 20mm graded stone aggegrate) as in Chullah hood chajja and manhole cover, kitchen shelves etc set in cement mortar 1:6.including all neccesary formwork & finishing exposed concrete surface complete all as specified & directed

S&F precast cement concrete Jafri jallies, 35mm thick including all mouldings including Pre cast frame wk, using Type B0 1:2:4 (12.5mm aggregate) Set in cement mortar 1:4 complete all as specified & directed

Cutting chases ,pinning in brick work girth exc 10cm but n exc 20 cm and making good to facing where required and poining ein cement mortar 1:3 to ends of edges of landing, sun shades, chajjas, shelves etc complete all as specified & directed

S&F TMT bars 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia or securing clips complete all as specified and directed.

All as described Ser item No. 49 here-in-before but 8 mm dia complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises complete all as specified & directed

M&L Non skid ceramic coloured tiles7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11Sqm but not exceeding 0.18 Sqm in floors set and jointed in neat cement slurry and pointed with white or colour and cement to match the colour of tile over and including 15 mm thick screed bed in cm 1:6 complete all as specified and directed.

S&F non skid ceramic tiles coloured of 7 to 8 mm (squre/ rectungular ) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors set and jointed in neat cement slurry and pointed with white or coloured cement to match the colours of tiles over and encluding 15mm screed bed in CM 1:6 complete all as specified and directed.

All as described Ser item No. 53 here-in-before but as in skirting over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

S&F Coloured Glazed ceramic tiles in vertical surfaces 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to matching shade complete all as specified & directed

M&L for 10 mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:4 for backing of tile work coat complete all as specified & directed

M&L for vitrified ceramic tiles light shade 10 mm thick (square/rectangular) area of each tiles not exceeding 0.36 sqm, in floors etc, with neat cement slurry over and including 15 mm thick screed bed of cement mortar 1:6 including pointing in white or coloured cement with pigment to match the shade of tiles complete all as specified and directed.

All as described Ser item No. 57 here-in-before but on vertical surfaces such as skirting fixed on and including 10mm thick rendering in cement mortar 1:4 as backing coat complete all as specified and directed.

Taking up or down steel tubing and connection 15 mm bore pipe and removing from site complete all as specified & directed

All as described Ser item No. 59 here-in-before but 20 mm bore pipe complete all as specified & directed

Supplying and laying of CPVC 20mm outer dia pipes SDR 11 & Plain CPVC SDR 11, with all fittings, brass threaded fittings and fixed on walls/ceiling or laying in floors complete all as specified & directed

Supplying and laying of CPVC 25mm outer dia pipes SDR 11 & Plain CPVC SDR 11, with all fittings, brass threaded fittings and fixed on walls/ceiling or laying in floors complete all as specified.incl holding the pipe with stainless steel ring with powder coated aluminium frame at 1 mtr c/c to be fixed walls where as required complete all as specified & directed

Supplying and laying of 20mm bore galvanized iron tubes medium grade with all fittings and fixed on walls/ceiling or laying in floors complete all as specified. incl holding the pipe with stainless steel ring with powder coated aluminium frame at 1 mtr c/c to be fixed walls where as required complete all as specified & directed

Dismantling PVC water tank of capacity exc 250 ltr but not exceeding 500 ltr and removing from site complete all as specified & directed

Dismantling PVC water tank of capacity exc 500 ltr but not exceeding 1000 ltr and removing from site complete all as specified & directed

S&F triple layer white color 500 Ltrs Rotational moulded polyethylene (PVC) water storage tanks cylindrical vertical with closed top including tank nipple nuts and washers for fixing inlet, outlet/washout pipes and air vent pipes and complete all as specified & directed

S&F triple layer white color 1000 Ltrs Rotational moulded polyethylene (PVC) water storage tanks cylindrical vertical with closed top including tank nipple nuts and washers for fixing inlet, outlet/washout pipes and air vent pipes complete all as specified & directed

S&F 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. ,fixed in repairs complete all as specified and directed.

S&F in repairs bib taps long body brass cromium plated fancy type 15 mm bore size screwed down screwed for iron pipe or for brass ferrule complete all as specified & directed

S&F in repairs 15 mm dia stop cock/angle cock cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle, flench screwed both ends for iron or for union complete all as specified & directed

S&F in repairs Pillar taps, cast copper alloy, fancy type cromium plated with capstan heads,chromium plated,screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified & directed

S&F in repairs of vitreous china squatting pan ‘Orrisa pattern’ size 580 x 440 mm white with integral foot rest including replacement of ‘P’ or ‘S’ trap lime concrete bedding and making good floor complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan (Pedestal pattern), white with 'p' or 's' trap (excluding flushing cistern and flush pipe), including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe etc. complete all as specified and directed.

S&F in repairs Vitreous china premium/ 1st quality wash down water closet EWC single piece white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc.including combind flushing cistern & flush pipe complete all as specified & directed

S&F in repairs vitreous china wash basin, size 550 x 400 mm including brackets and 32mm PVC waste pipe and coupling complete all as specified and directed.

S&F in repairs PVC valveless, syphonic action type (10 Ltr) flushing cistern low level white with intel ball valve, float and handle including bracket and flush pipe to squatt pattern closet including all joints and making good to the floor complete all as specified and directed.

S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified & directed

S&F in repairs grating 110mm size of SS complete all as specified & directed

S&F in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes coupling; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 485mm x 420mm bowl size 410mm x 3330mm x 160mm complete all as specified & directed

S&F in repairs 450mm long heavy duty PVC Connection 15mm size with PTMT nuts complete all as specified and directed.

S&F in repairs PVC waste pipe 32mm dia for WHB, Urinal, Sink etc complete all as specified & directed

S&F in repairs vitreous china urinal half stall white including 32mm pvc waste pipe complete all as specified & directed

S&F in Floor 140mm over all length with flap door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified & directed

S&F in repairs chromium plated shower rose 125mm size complete all as specified & directed

S&F in repairs CP soap dish complete all as specified & directed

S&F in repairs 15 mm dia brass chromium plated central hole wash basin mixture, fancy type with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut capstanhead screwed for 15mm dia pipe fixed in repair complete all as specified & directed .

S&F in repairs 15mm dia chromium plated fancy type wall mixer with over head shower for mixing hot & cold water screwed, fixing and connection to pipes complete all as specified and as directed.

S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified & directed

S&F in repairs fancy type glass corner fancy type of size 250mm x 250mm of 6 to 7mm thick toughned glass with CP railing fixed with fancy type screws complete all as specified and directed.

S&F in repairs 20mm dia gun metel globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed complete all as specified & directed

S&F in repairs 15 mm gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe complete all as specified & directed

S&F in repairs EWC seat covers any colour for pedestal pan with hinges complete all as specified & directed

S&F in repairs Tubular towel rail, brass cromium plated 20mm dia, D type, 60cm long between flanges complete all as specified & directed

S&F in repairs Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe 20 mm dia complete all as specified & directed

S&F in repairs 75mm bore PVC Pipes single socketed in any length with rubber ring joints, fixed to walls and floor etc and supply and fixing powder coated aluminium frame and stainless steel ring to hold 75mm pipes in place at 1.5 mtr c/c to be fixed to wall as per site requirement complete all as specified & directed Note: considered height upto 12m from FFL of Ground Floor.

S&F in repairs 110mm bore PVC Pipes single socketed in any length with rubber ring joints, fixed to walls and floor etc. as in waste and rain water pipes and supply and fixing powder coated aluminium frame and stainless steel ring to hold 110mm pipes in place at 1.5 mtr c/c to be fixed to wall as per site requirement complete all as specified & directed. Note: considered height upto 12m from FFL of Ground Floor.

S&F in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed in repairs complete all as specified & directed

S&F in repairs PVC(SWR) floor trap, 125/110mm bore, plain with grating including jointing with solvent cement complete all as specified & directed

S&F in repairs PVC Pipes single socketed in any length with rubber ring joints, fixed to walls, laid under floors etc. 75mm bore as in waste and rain water pipes complete all as specified & directed.

Dismantling wall and ceiling boards(fibre, pulp, insulation, etc) or insulation boards/slabs/blankets any thickness, including cover fillets complete all as specified & directed

S&F fibre cement coloured textured designer ceiling board 4mm thick of size 595x595 mm conforming to IS : 14862 & IS : 2380 Part-XIV fixed to timber / GI / Aluminium frame work with screws/clips complete all as per manufactures instructions and complete all as specified & directed

S&F GI snap grid frame work for false ceiling of size of grid 605x605mm all as specified and Hangers 2mm dia GI (upto 1200mm length) adjusting level fixed to steel frame work complete all as specified and directed.

Dismantling asbestos cement (corrugated, semi-corrugated, etc) sheet in roof coverings and height of buildings upto 12mtr with out stair case all as specified and directed.

S&F pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with hot dip galvanised self dirilling and self tapping screws neoprene and EPDM washers complete all as specified, directed and as per manufacturer's instructions complete all as specified & directed

S&F pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with hot dip galvanised self dirilling and self tapping screws neoprene and EPDM washers complete all as specified, directed and as per manufacturer's instructions complete all as specified & directed

Taking down old existing water proofing treatment from the top of RCC/ arch slab, including taking down existing PCC padding or plaster and hacking the top of RCC slab, roof tile, cleaning with water and disposal of rubbish off the premises complete all as specified & directed. Note: considered height upto 12m from FFL of Ground Floor.

M&L for PCC 1:2:4 type B-0(using 12.5 mm graded stone aggregates) all as specified and directed. Note: considered height upto 12m from FFL of Ground Floor.

M&L for 10mm thick cement paster in CM 1:4 mixed with WPC @ 200ml by weight of 50kg cement finised even and smooth without using extra cement on roof surface complete all as specified & directed Note: (i) WPC will be measured and paid seperately as supply only rate) (ii) considered height upto 12m from FFL of Ground Floor.

M & L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick 75mm thick over lap reinforced with polyster non woven fabric (wt. not less than 150 gms/sqm) laid on primed surface by forced application and over two coat aluminium paint complete all as specified & directed

Supply only liquid water proofing compound complete all as specified & directed

S&F in repairs fancy type vertical venation blinds consisting of alum head rail, vanes/louvers 4” wide of approved tint and traverse cord of any design & color fixed in position complete all as specified & directed

S&F in repairs fancy type Roller blinds consisting of alum head rail, blind of approved tint and traverse of any design & colore fixed in position complete all as specified & directed

Repair to bib taps, pillar taps, angle/stop valves, mixer, cistern including necessary washers, capheads, etc in piece meal complaint complete all as specified & directed

Demolition of cement concrete of ground floor n exc 15 cm in depth in any position not otherwise specifically provided for complete all as specified & directed

M&L for cement concrete type C-2, 1:3:6 using 40mm graded stone aggregate of 75 mm thick in floors complete all as specified & directed

M & L for providing, cement concrete 1:2:4, type B1 (20mm graded stone agg) in lintels upto 1..5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in water troughs and the like including weathering, slightly rounded for chamfered angles and throating, as directing complete all as specified & directed

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded or pointed in cement mortar complete all as specified & directed

M&L for 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking plat forms and like vertical surfaces in cement mortar (1:4) including point ing in white cement (1:2) us ing marble dust with admix ture of pigment to match with shade of granite including 10 mm thick rendering in CM 1:4 for receiving Granite work complete all as specified & directed

M&L for glossy finish chequered cement concrete colour tiles size 300mm cmx300mmx25 mm thick, with colour pigment, set, jointed and pointed in neat cement slurry over and including 15 mm thick screed bed in cm (1:6) complete all as specified and directed.

M&L for 75 mm thick cement concrete 1:4:8 type D-2 using (40 mm graded stone aggregates) as in sub base complete all as specified and directed.

M&L for PCC 1:3:6 type C1 using 20mm graded stone aggragate as in bed bricks, coping etc including weathering slightly rounded or chamfered angles and throating making grovves including necessary form work complete all as specified & directed

M&L in repairs 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified & directed

VIRAT CONSTRUCTIONS (BID ID -3336906)

Punit Jain (BID ID -3331251)

veer enterprises (BID ID -3334429)