Estimate for Construction of Cross Regulator and Head Regulator at RD 162490 of Lahore Branch.

Dismantling concrete, Cement concrete plain 1:2:4 mix.

Excavation in Soil (any type) using Hydraulic Excavator CK 90 with hydraulic excavator of 0.9 cum bucket capacity including cutting, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, including all lifts and combined lead upto 30m

Extra for laying earth/fly ash as per specifications in 20 cm. Layers and dressing but excluding cost of rolling.

Extra for watering the earth/fly ash laid in 20 cm layers as per specifications for compaction.

Extra for rolling to specifications.

Dressing side slopes and preparation of sub Grade for lining.

Earthwork for lip cutting for lining of irrigation channels inclusive of all allowance, lead and dressing.For 0 to 1.5 m depth

Earthwork for lip cutting for lining of irrigation channels inclusive of all allowance, lead and dressing.For 1.5 to 3.0 m depth

Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days. (M10)

Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. PCC Grade M15

Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. RCC Grade M20 With Batching Plant, Transit Mixer and Concrete Pump

Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. RCC Grade M25 With Batching Plant, Transit Mixer and Concrete Pump.

Cement concrete lining 75mm. thick or less laid manually for irrigation channels, using cement concrete M- 15 with cement content 325 kg/cum mixed in an automatic computerized Batching & Mixing Plant and transported to the site in transit mixers with an average lead of 1 Km(FOR TRAPEZOIDAL SECTION AND CUP SECTION OF ALL RADII). Complete in all respect as per drawings,designs, specifications and instructions of Engineer- in-charge.

Plain/Reinforced cement concrete in substructure complete as per drawingand Technical Specifications RCC Grade M20 With Batching Plant, Transit Mixer and Concrete Pump

Plain/Reinforced cement concrete in substructure complete as per drawingand Technical Specifications RCC Grade M25 With Batching Plant, Transit Mixer and Concrete Pump

Furnishing and placing Reinforced/Prestressed cement concrete in super-structure as per drawing and Technical Specification. RCC Grade M25.Using Batching Plant, Transit Mixer and Concrete Pump.For solid slab super structure including centering and shuttering Height upto 5m.

Supply of boulder stone as per departmental specification including digging, collection, all taxes, loading, unloading, stacking and re-carriage if any from Govt. approved quarry to stack yard& the work should be completed as per PWD specification, department design/drawings and also as per instruction of engineer in charge complete in all respects.

Filling stones or spalls into crates and hand packing

Weaving wire netting for wire crates including binding sides and partitions to make crate of 15 cm x 15 cm or 25 cm x 7.5 cm mesh.

Providing and laying Shingle/Crushed stone filling jharries in blocks on Level surface & the work should be completed as per PWD specification, department design/drawings and also as per instruction of engineer in charge complete in all respects.

Filling stone or spall on level . Supply and filling of 300 mm thick Graded Filter of fine sand below the 450x450x450 CCM-10 blocks

Providing and laying of a strip seal expansion joint catering to maximum horizontal movement upto 70 mm, complete as per approved drawings and standard specifications to be installed by the manufacturer/ supplier or their authorized representative ensuring compliance to the manufacturer's instructions for installation.

Structural steel work in angles, tees, flats, riveted, including cutting, fixing all gusset plates, bolts, nuts, rivets etc. with hoisting and erecting in position. For roof truss, well curbs, plate girders etc. of any span for building for bridges upto 15M span.(Structural steel like brand SAIL, TATA, VIZAG)

Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete

Back filling behind abutment, wing wall and return wall complete as per drawing and Technical Specification

Making Dewatering arrangement by pumping set 4"x4" ( Tractor Driven)

Filling expansion joints with special impervious hot pour 12.5mm wide. Complete in all respect as per drawings,designs, specifications and instructions of Engineer- in-charge.

Putting 1:3 (Cement:water) cement slurry with cement @ 2.25 kg per sqm on prepared bed and side slopes before laying concrete on bed and side slopes. Complete in all respect as per drawings,designs, specifications and instructions of Engineer- in-charge.

Supplying and laying of LDPE geomembrane sheet for sleepers of 150 micron thickness as approved by engineer incharge pasting on faces of sleepers including laying in position, carriage to site, jointing/welding etc. Complete in all respect as per drawings,designs, specifications and instructions of Engineer- in-charge.

Extra bitumen painting at 0.69 Kg. per Sqm. Complete in all respect as per drawings,designs, specifications and instructions of Engineer- in-charge.

Excavation of Soil using Hyraulic Excavator and hydraulic Tractor Trolly I/C cutting and loading in Trolly and transporting to the embankment locations with all lifts and leads. Complete in all respect as per drawings,designs, specifications and instructions of Engineer- in-charge. Disposal/carraige from 0 to 450m.

Excavation of Soil using Hyraulic Excavator and hydraulic Tractor Trolly I/C cutting and loading in Trolly and transporting to the embankment locations with all lifts and leads. Complete in all respect as per drawings,designs, specifications and instructions of Engineer- in-charge. Disposal/carraige additional beyond 450m upto 1km.

Excavation of Soil using Hyraulic Excavator and hydraulic Tractor Trolly I/C cutting and loading in Trolly and transporting to the embankment locations with all lifts and leads. Complete in all respect as per drawings,designs, specifications and instructions of Engineer- in-charge. Disposal/carraige for every additional km upto 3km.

Providing & fixing in position of flat/wedge seal including preparation of surface complete in all respects and to entire satisfaction of Engineer in charge.(80 mm dia x 10 mm th.)

Providing of hollow bulb seal (Taflon Claded) & fixing in position including preparation of surface complete in all respects and to entire satisfaction of Engineer in charge. (100/44 x 10mm)

Providing of hollow bulb seal (Taflon Claded) & fixing in position including preparation of surface complete in all respects and to entire satisfaction of Engineer in charge. (57/22 x 10mm)

Supply, Providing and fixing of MS Bolts & Nuts (for seals of all types) with washer of all sizes and length required as per sample / drawing / direction of Engineer-In charge complete in all respects.

MS Housing Cover with worm and worm wheel assembly, shaft, handle, gun metal bush with triple start threading inside complete in all respects 2.5 Ton capacity

MS Housing Cover with worm and worm wheel assembly, shaft, handle, gun metal bush with triple start threading inside complete in all respects

Supply of spindle for hoist machanism including threading and machinning complete in all respects and to entire satisfaction of Engineer in charge 65mm dia

Supply of spindle for hoist machanism including threading and machinning complete in all respects and to entire satisfaction of Engineer in charge 40mm dia

Supply and fixing of spindle cover

Fixing and Holding the gate with the help of 35 tonne capacity crane.

Commisioning & testing of Gates at site complete in all respects and to entire satisfaction of Engineer In charge.

Providing & Fixing Clamp Plate, complete in all respects (Size 75x10mm)

Providing & Fixing Clamp Plate, complete in all respects (Size 50x8mm)

Supply and fixing of Common Shaft duly machined at site complete in all respects and to entire satisfaction of engineer in charge

Fixing of coupling for common shaft with supply of Spindle shaft coupling rods and cover complete in all respect and to entire satisfaction of Engineer In charge.

Providing Gate wheel assembly complete in all respects to entire satisfaction of engineer-in-charge 200mm dia

Assembling and fixing in position Gate Wheel Assembly complete in all respects and to entire satisfaction of Engineer-in-charge.

Providing & Fixing of Wheel Pin in position complete in all respects and to entire satisfaction of Engineer-in - charge. (upto 75mm/above 75mm)

Providing Spherical Roller Bearing No. 22210 make SKF

Fixing Roller Bearing complete in all respects

Providing & Fixing of Pin for Hoist complete in all respects and to entire satisfaction of Engineer-in - charge. (20 OD x 150 L)

Scrapping, Brushing to remove paint to base metal surface.

Painting of gate leaf with primer coat and two coats with Anti corrosive Bitumastic paint to give an even shade with special quality paint.

Painting two coats with ready mix synthetic enamel paints over one coat metal primer

Providing and Fixing Skin Plate 8mm

Providing and Fixing ISMB 200 x 100 mm

Providing and Fixing ISMC 200 x 75 mm

Providing and Fixing End Plate 215 x 10mm

Providing and Fixing of Stiffner Plate 100x8mm

Providing and Fixing of Back Plate 50 x 10mm

Providing and Fixing of Plate 100 x 6 x 80mm

Providing and Fixing of Plate 150 x 8 x 150mm

Providing and Fixing of Plate 45 x 8 x 150mm

Providing and Fixing of Plate 51 x 8 x 40mm

Providing and Fixing of Retainer Square Bar 20mm x 20mm

Providing and Fixing of Plate 200 x 8 x 70mm

Providing and Fixing of Plate 200 x 8 x 215mm

Providing and Fixing of Plate 200 x 10 x 180mm

Providing and Fixing of Plate 275 x 10 x 200mm

Providing and Fixing of Plate 70 x 8 x 175mm

Providing and Fixing of Plate 20 x 8 x 175mm

Providing and Fixing of Plate 300 x 10 x 1600mm

Providing and Fixing of Plate 50 x 8 x 1600mm

Providing and Fixing of Web Plate 250 x 10 x 1600mm

Providing and Fixing of Stiffner Plate 250 x 8 x 160mm

Providing and Fixing of Plate 100 x 8 x 100mm

Providing and Fixing of SS Plate 100 x 10 x 1600mm

Providing and Fixing of Plate 375 x 8 x 1600mm

Providing and Fixing of Plate 75 x 5 x 1600mm

Providing and Fixing of Guide Plate 45 x 16 x 1600mm

Providing and Fixing of Anchor Rod 16 OD x 350 L

Providing and Fixing of Plate 300 x 8 x 1600mm

Providing and Fixing of SS Plate 80 x 8mm

Providing and Fixing Three Bay Column, Deck and Staircase

Supply of multi purpose Synthetic hetiv grease

Supply of Diesel

Supply of Mobil Oil

Providing and Fixing ISMC 125 x 65 mm

Providing and Fixing Bearing Pad 50x6mm

Providing and Fixing of Stiffner Plate 100 x 8 x 425mm

Providing and Fixing of Back Plate 50 x 10 x 425mm

Providing and Fixing of Retainer Square 16 x 16 x 800mm

Providing and Fixing of ISA 75x75x10mm

Providing and Fixing of Back Plate 50 x 10 x 800mm

Providing and Fixing of Plate 150 x 8 x 1600mm

Providing and Fixing of Plate 80 x 8 x 1600mm

Providing and Fixing of Plate 50 x 6 x 1600mm

Providing and Fixing of Plate 225 x 8 x 1600mm

Providing and Fixing ISMB 150 x 80 mm

Providing and Fixing ISMC 100 x 50 mm

Providing and Fixing of Plate 60 x 6 x 610mm

Providing and Fixing of Anchor Rod 16 OD x 240 L

Providing and Fixing of Chequred Plate 1065 x 1000 x 6mm

Providing and Fixing of Bottom Plate 150 x 150 x 10mm

Providing and Fixing of J Bolt 16 OD x 250 L

Any other Item

VARSHA CONSTRUCTION CO