Work for Rewinding of 120 HP motor number 02 and soft starter repair at Mandipet pump house. rewinding of 30 HP motor at CMC pump house and installation of LBS. under city corporaton tumakuru

Work for Rewinding of 120 HP motor number 02 and soft starter repair at Mandipet pump house. rewinding of 30 HP motor at CMC pump house and installation of LBS. under city corporaton tumakuru

Rewinding of 120HP submersible motor: Removing power supply cable connections to the motor by removing motor terminal box meggering for testing of motor condition and then dismantling the motor at the...

Providing and fixing new bearing No. 7220 B to driving end of 120HP Non clog submersible pump set with all lead and lift as directed by the Engineer in charge of work.

Providing and fixing new bearing No. 6316-2Z-C3 to non driving end of 120 HP Non clog submersible pump set with all lead and lift as directed by the Engineer in charge of work.

Supplying and fixing Oil seal for 120 HP Non clog submersible pump set with all lead and lift as directed by the Engineer in charge of work.

Lifting and re-erection of 75HP to 180 HP non clog submersible Motor the cost including of transportation, loading and unloading at both the destination complete as directed by the Engineer in charge ...

Supply and Installation of 3-Phase PMU-R0 relay for motor bearing, winding temp., water level indication etc..controlling relay

Supply and Installation of 3-Phase MPR Motor Protection Relay for over load/over current microprocessor based controlling complete protection. Approved rate 2024-25

Rewinding of Burnt-out 3Phase, 415+/-10% volts 32.4 A, 1400 rpm, 50Hz, 30HP OPEN WELL submerged motor and overhauling of jammed centrifugal pump vertical discharge, single stage,1400 rpm, 28 Lps disc...

Providing water proof electric Welding joint:The Work Includes transporting, loading unloading placing required capacity welding machin to work spot with generator set and providing, welding rods, op...

Supplying and fixing of Load Break Switch with Panel i 41.01 ESCOMs SR 2023-24

Work of replacement of faulty control components and modification and rewiring of soft starter panel upto 1250KW/6.6KV motor as specified: Schneider Altistart 22 soft starter for 120HP motor: a. Disco...

Supply and fixing of 4pole power contactor with NO/NC

contacts on existing wood/panel board using necessary

bolts, nuts, washers and wiring etc., complete with AC-3

Rating and as per IS-13947. 65 A PW...

Supplying and fixing Microprocessor based Electronic timer(without contactor, Din Mounting using necessary bolts, nuts and washers etc.,.)3-120sec setting. PWD Ele SR 2-23-24 p-21 i 5.47