Karnataka

Retender

Works

Buildings

Construction of Nandigadda-2 Anganwadi Nandigadda at Janaga village Nandigadda gp Haliyal tq.(MGNREGA Convergence) (Other)

Rural Development and Panchayat Raj Department

RDPR Division Office Sirsi | Karnataka

Amount: ₹12.7 LCloses: 29 Feb 2024Closed

Timeline

Published21 Feb 2024
Closed29 Feb 2024
Retendered21 Feb 2024

Cancellation Details

Retendered

RetenderedRetenderedReason: Retendered

Published 21 Feb 2024

Tender Value

₹12.7 L

EMD Value

₹31,800

Closing Date

29 Feb 2024, 9:30 pmClosed

Tender Inviting Authority

Office Inviting Bids

Rural Development and Panchayat Raj Department

Contact Person

EXECUTIVE ENGINEER

Office Number

08384226381

Work Description

Construction of Nandigadda-2 Anganwadi Nandigadda at Janaga village Nandigadda gp Haliyal tq.(MGNREGA Convergence) (Other)

Tender Information

Tender ID

RDPR/2023-24/BD/WORK_INDENT4547

Reference Number

RDPR/2023-24/BD/WORK_INDENT4547

Tender Type

Open

Product Category

Buildings

Form of Contract

Electronic Documents, First(One Cover)

Location

RDPR Division Office Sirsi

Source Website

Subscribe to view

Documents Required

10 documents required · 10 mandatory

Technical Bid

RequiredThe Executive Engineer, P.R.E. SIRSI Division, SIRSI invites tenders from eligible tenderers, who have been registered in KPWD and with kppp portal for the construction of works

RequiredFinancial Turnover Certificate Should be Enclosed For the last previous 5 years From Charted Accountant in a single page

RequiredVAT/ GST Certificate

RequiredKW 1 format 1.3 A and 1.3 B compulsary Submitted with details

RequiredThe Contractor should scan the KPWD Registration Copy

RequiredThe Contractor should scan the PAN Card

RequiredContractors Postal Address and Mobile No.

RequiredEMD shall be paid in the form of e-payment through kppp portal on or before as per the last date and time mentioned in the kppp portal.

RequiredTurn over Certificate should be enclosed for the last previous 5 years from charted accountent in singal page and achieved in at least two financial year a minimum financial turnover is equal or above of Rs. 12.71 lakhs

RequiredTenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity should be not less than Rs. 12.71 lakhs

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

Department Registration Details

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing work

List of works for which tenders already submitted

Banker Details

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of KPPP on or before the last date and time of bid submission.

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of KPPP portal due to internet connectivity issues and technical glitches at bidders end.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder.

The bid is to be submitted through GOK KPPP platform www.kppp.karnataka.gov.in only.

Tenderers who have not registered in the GOK KPPP portal should be registered through web site www.kppp.karnataka.gov.in

The Tenderer should obtain tender documents through KPPP web site www.kppp.karnataka.gov.in . in at free of cost. Additional conditions and informations also can be obtained through the above mentioned website

Bidders / Contractors submit the bid on the website itself (for help on KPPP / e-payment, please contact helpdesk No. 08025501216 and 080 25501227 from Monday to Saturday during 9.00 AM to 9.00 PM.)

Any damage during the progress of work, the damage cost should be beard by the contractor

Tender application cost will not be refundable or exchangeable in case of cancellation of tender.

All materials should be in good quality as per specification, quality certificate for the same should be obtained from the concerned authority at their own cost.

The work should be carried out in accordance with the standard specifications specified by the department. Maintenance period from the contractor for the above works is 1 year from the date of completion of work.

Corrigendums / modifications / correction, if any, will be published in the website only.

More details should be collected from the office at working hours

The Executive Engineer rights accept and reject the tender without intimation or information

The Executive Engineer PRE SIRSI Division SIRSI invites tenders from eligible tenderers who have been registered in KPWD with kppp portal for the construction of works

Contractor should made an agreement within 20 days of tender acceptance date and work should be carried out immediately after Signing agreement. If not tender will be cancelled at the contractors own risk and cost

GST Shall be paid to the tendered amount separately

The Contractor should scan the KPWD Registration Copy.

The Contractor should scan the PAN Card and GST No.

Contractors Postal Address and Mobile No.

Bidder can access tender documents on the website, fill them and submit the completed tender document into electronic tender on the website https://www.kppp.karnataka.gov.in/

EMD shall be paid in the form of e-payment through KPPP portal on or before as per the last date and time mentioned in the KPPP portal.

Bidder can access tender documents on the website, fill them and submit the completed tender document into electronic tender on the website https://www.kppp.karnataka.gov.in/ after submitting the EMD and tender processing fee in the form of e-payment. EMD will be refunded only after acceptance of successful bidder

If the rates quoted by the Contractor is lesser than the amount put to tender the difference cost (Additional Security Deposit) should be paid by the contractor through FDR in the favor of Executive Engineer at the time of Agreement

Contractor should obey with the above conditions in addition to the KW-1

Turn over Certificate should be enclosed for the last previous 5 years from charted accountant in singal page and achieved in at least two financial year a minimum financial turnover is equal or above of Rs: 12.71 lakhs

Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity should be not less than Rs: 12.71 lakhs

Work Locations

Fee & Financial Details

Tender Fee Amount

₹500

EMD Fee Amount

₹31,800

Important Dates

Last Activity

21 Feb 2024

Published

21 Feb 2024

Download Ends

29 Feb 2024

BOQ Preview

•

Construction of Nandigadda-2 Anganwadi Nandigadda at Janaga village Nandigadda gp Haliyal tq.(MGNREGA Convergence) (Other)

•

Providing and laying in position Reinforced cement concrete for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The g...

•

Lintle & Roof Beam ---- work complete within 4 months

•

Slab ---- work complete within 4 months

•

Chejja ---- work complete within 4 months

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/w...

•

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse...

•

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete,...

•

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...

•

Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, prov...

•

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 ...

•

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, w...

•

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in al...

•

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint...

•

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the s...

•

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of...

•

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel...

•

Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete ...

•

Providing and fixing in position fully panelled Matti/Nandi wood shutters for doors with , stiles and rails of 30mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per d...

•

Flooring with 25mm thick polished tandur blue stone slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mix...

•

Providing and laying Polished Sadarahalli Grey Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural ...

•

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting an...

•

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, ou...

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the ...

•

KSRB13-8.5 : Providing and fixing to wall, ceiling and floor, low density polyethylene pipes 6.00 kgf/sq.cm working pressure 110mm outside diameter with special flange, compression type fittings, wall...

•

SupplyingheavygaugePVCconduitpipe.......dia.......mmthickconfirmingtoIS2509withsuitablesizebends,junctionboxes,adhesivepasteetc,andfixingusinginvertedwoodplugsincaseofRCCceilingandRCCwall/stonestructu...

•

Supplying and fixing PVC/metal conduit Deep junction box 25mm deep junction box( It. No 1.5.2 Electrical Sr 2023-24 Page. No 2) ---- work complete within 4 months

•

Supplying and fixing 32Amps security and energy saving DP switch with key tag suitable to operate on 230 Volts, 50Hz AC supply & completely wired on existing box.( It. No 3.7 Electrical Sr 2023-24 Pag...

•

Supplying and drawing PVC insulated flexible copper wire of approved make..23/0.0040” ( It. No 2.4.2 Electrical Sr 2023-24 Page. No 3) ---- work complete within 4 months

•

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

•

Supplying 6A flush type socket and 6 amps flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring us...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A One Way Switch ( It. No 3.6.1 Electrical Sr 2023-24 Page. No 5) ---- work ...

•

Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/N...

•

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

•

Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S' hook with fan regulator to the existing board together with supplying and fixing 5 amps. ceiling rose, necessar...

•

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts,50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball...

•

Fixing all types and all capacities of 1'x4' / 2'x2' LED Light fittings indoor on the wall / ceiling / rafters / girders with necessary supporting frame, using 23/0.0076” twin twisted PVC insulated ...

•

Supplying of recess mounting non integrated type LED down light . ---- work complete within 4 months

•

Wiring for lighting/power circuit using oneofFRLSPVCinsulated1100Vgrade, multistrand copper wire with lowconductor resistance single coreinopenorconcealed systemofwiring with specified IS-...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

4547.doc

Others - kw-1 format • 0.15 MB

Lot 295 Haliyal & Dandeli.pdf

Others - randamisation • 0.05 MB

DETAILED TECHINICAL SPECIFICATION FOR BUILDING WORKS.doc

Others - kw-1 details • 0.29 MB

notification.pdf

Others - notification • 2.00 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].