DAY TO DAY MAINTENANCE TO CERTAIN BUILDINGS, REPAIR/ MAINT AND CLEANING OF SEWAGE LINES, MANHOLES, SEPTIC TANKS AT IMTRAT UNDER GE(AF) HASIMARA

Amount

Taking down eaves gutters and PVC rain water pipes (of any or pattern) including all fittings, heads, shoes, bends, swan-necks, etc., (measured overall as fixed along the centre line over fittings and accessories), complete all as specified and directed.

S &F 110mm bore PVC (SWR) soil, waste and vent pipes single socketed in any length with rubber ring joints, fixed to walls, complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends of any radius, complete all as specified and directed.

S&F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal, complete all as specified and directed

S&F 110mm bore PVC (SWR) branch piece, single (single Y) equal or unequal, complete all as specified and directed

S &F in repair 75mm bore PVC (SWR) soil, waste and vent pipes single socked in any length with rubber ring joints fixed to walls, complete all as specified and directed.

S&F 75mm PVC (SWR) bends of any radius, complete all as specified and directed

S&F 75mm bore PVC (SWR) junction single, (Single T) equal or unequal, complete all as specified and directed.

S&F 75mm bore PVC (SWR) branch piece, single (single Y) equal or unequal, complete all as specified and directed.

Dismantling of 100mm dia cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out from walls, if required, complete all as specified and directed.

S&F 100mm dia cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, but fixed to walls, complete all as specified and directed.

S&F 100mm bore CI bends (any radius), diminishing pieces or tapers (larger bore measured), complete all as specified and directed.

S&F 100mm bore cast iron vent cowl, complete all as specified and directed.

Dismantling of 75mm bore cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out from walls, if required, complete all as specified and directed

S&F 75mm bore cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, but fixed to walls, complete all as specified and directed.

S&F 75mm bore bends (any radius), diminishing pieces or tapers (larger bore measured), complete all as specified and directed.

Dismantling of 150mm dia cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out from walls, if required, complete all as specified and directed.

S & F sand cast, cast iron, soil / waste / vent pipes, 150mm bore, (ISI marked) in any length with or without ears, jointed with cement and sand mortar in (1:1) ratio, fixed to walls and including MS clamps as required at site, complete all as specified and directed.

S&F 150mm bore CI/soil waste bends (any radius), diminishing pieces or tapers (larger bore measured), complete all as specified and directed.

S&F stack clamps made out of 50mm 5mm flat iron & 16mm dia round iron stays. Including bolts & nuts & securing ends of stays to wall or roof for 75mm bore pipe, complete all as specified and directed.

S&F stack clamps made out of 50mm 5mm flat iron & 16mm dia round iron stays. Including bolts & nuts & securing ends of stays to wall or roof for 100mm bore pipe, complete all as specified and directed.

S&F in repairs stop valves, cast copper alloy, chromium plated ,with long shank and cup (concealed type) fancy type screwed down, high pressure, with crown head, screwed both ends for 15mm bore iron pipe or for unions, complete all as specified and directed.

S&F in repairs stop valves, cast copper alloy, chromium plated fancy type with capstan head screwed down, high pressure, screwed both ends for 15mm bore iron pipe or for unions, complete all as specified and directed

S&F in repairs brass chromium plated, angle cock, screwed for 15 mm bore iron pipe fixed in repairs, complete all as specified and directed.

S&F in reapir bib taps, cast copper alloy chromium plated fancy type with capstan head, screwed down, screwed for 15mm bore iron pipe, compelete all as specified and directed.

S&F in repairs pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down, high pressure, with or without lettered ‘HOT’ or ‘COLD’ with long screwed shanks and fly–nuts, screwed for 15mm bore iron pipe, complete all as specified and directed.

S&F in repairs 15mm bore pillar taps fancy type, swan neck 2 way cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe, complete all as specified and directed.

M & L for 125mm dia brass chromium plated shower rose with swivel joints fixed in repairs, complete all as specified and directed.

S & F in repairs PVC body cabinet box with mirror of size 450mm X 350mm in PTMT alloy of approved design and pattern, complete all as specified and directed. Make: Prayag Cat Part No. 557 or equivalent in Supreme/National/Alphina

S&F in repairs plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinge device, complete all as specified and directed.

S & F in repairs vitreous china ware wash hand basin white, flat back, size 630 x 450mm (flat back or angle back type) including cutting for and pinning ends of brackets or erecting stand including pedestal, complete all as specified and directed. .

M&L for 32mm waste fittings, brass chromium plated for glazed ware sinks, basins etc with long screwed shanks and fly-nuts, flang end bedded in red lead, cement and other end fixed in repairs, complete all as specified and directed.

S&Fixed in repairs 32mm dia waste coupling of PTMT (half or full threaded) (Minimum weight -45 gms), complete all as specified and directed.

S & F in repairs vitreous vhina ware counter wash hand basin white, sunken type, including CP waste coupling and PVC water pipe, WHB to be fixed in the counter slot and sealed with white cement, complete all as specified and directed.

S & F in repairs vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), complete all as specified and directed.

S&F in repairs vitreous china squatting pan, ‘Orissa’ pattern, size 580 x 440mm white, with integral foot rests (excluding flushing cistern and flush pipe) incl P or S trap, complete all as specified and directed.

S & F in repairs vitreous china urinal, bowl type flat back of size 330 x 250 x 445mm white (minimum), with grating and union for discharge pipe, complete all as specified and directed.

S & F in repairs vitreous china urinal, half stall type of size 345 x 320 x 560mm (minimun) white (excluding flushing cistern, flush pipe and waste pipe), complete all as specified and directed.

S&F in repairs health faucet ABS body with wall hook and 1m stainless steel chrome finish braided rubber hose chrome all necessary fitting, complete all as specified and directed. (Make Cera F8030103 or equivlent in Paryware/Hindware/Prayag)

S&F in repairs 110mm steel grating, fixed with white cement, complete all as specified and directed.

S&F in repairs 75mm steel grating, fixed with white cement, complete all as specified and directed.

S&F in repairs 110mm dia gratings of PTMT (Minimum weight 25gms) fixed, complete all as specified and directed.

S&F in repairs 15mm bore, 45cm long PTMT PVC connecting pipe fitted with brass unions to connect iron pipe on both ends, complete all as specified and directed.

S&F in repairs low density waste pipe 40mm dia for working pressure rating 4 Kg/Sqcm with polyethylene union and check nuts 75 cm long suitable for steel sink waste, complete all as specified and directed.

S&F in repairs 32mm dia PVC waste pipes 900mm long, complete all as specified and directed. .

S&F in repairs 15mm bore bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms), complete all as specified and directed.

Supply and fix in repairs 10 Ltr capacity, low level flusing cistern, PVC, white, with inlet ball valve, float, handle, flush pipe of polyethylene of low or high density of PVC, 32mm dia including brackets and connections to pipe, complete all as specified and directed.

Fixing only in repairs, flushing cistern and flushing pipe (exclusive of brackets), complete all as specified and directed.

S&F in repairs PVC flushing cistern handles including all necessary items, complete all as specified and directed.

S&F in repairs, sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes incl bedding in cement mortar to dwarf wall or incl fixing cantilever brackets and connecting union to pipe overall size brackets and connecting union to pipe overall size 914mm x 460mm bowl size 406mm x 354mm x 203mm, complete all as specified and directed.

S & F in repairs, 15mm bore, Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight - 142 gms), complete all as specified and directed.

S & F in repairs, 20mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight - 210 gms), complete all as specified and directed.

S&F 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) triple layer with lid, hoisted and fixed in position all as specified in SSR Part-I including dismantling and taking down old unserviceable water tank of any description, complete all as specified and directed. Note :- The date of installation to be mentioned on tank marked with synthetic enamel paint with letter size 10cm high in white colour, over a black background of appropriate size,as (DD/MM/YR) with sign from occupant .

S&F 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) triple layer with lid, hoisted and fixed in position all as specified in SSR Part-I including dismantling and taking down old unserviceable water tank of any description, complete all as specified and directed. Note :- The date of installation to be mentioned on tank marked with synthetic enamel paint with letter size 10cm high in white colour, over a black background of appropriate size,as (DD/MM/YR) with sign from occupant

S&F 2000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) triple layer with lid, hoisted and fixed in position all as specified in SSR Part-I including dismantling and taking down old unserviceable water tank of any description, complete all as specified and directed. Note :- The date of installation to be mentioned on tank marked with synthetic enamel paint with letter size 10cm high in white colour, over a black background of appropriate size,as (DD/MM/YR) with sign from occupant

S&F in repair PVC/plastic lid/cover for 500/1000/2000 Ltrs capacity rotational moulded polyethylene water storage tanks, complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store, complete all as specified and directed.

Refixing old steel tubing of 15mm bore and connections in new or old position (walls, ceilings, floors etc.), complete all as specified and directed.

S & F 15mm bore galvanized steel tubes, medium grade with all fittings and fixed to walls and ceiling or laid in floors, complete all as specified and directed.

Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store, complete all as specified and directed.

Refixing old steel tubing of 20mm bore and connections in new or old position (walls, ceilings, floors etc.), complete all as specified and directed.

S & F 20mm bore galvanized steel tubes, medium grade with all fittings and fixed to walls and ceiling or laid in floors, complete all as specified and directed.

S&F in repairs 15mm dia gun metal, globe or gate valve, with iron wheel head, screwed both ends for iron pipe, complete all as specified and directed.

S&F in repairs 20mm dia gun metal, globe or gate valve, with iron wheel head, screwed both ends for iron pipe, complete all as specified and directed.

S&F in repairs 20mm dia brass chromium plated tubular towel rails, D type, 60cm long between flanges, complete all as specified and directed.

S&F in repairs CP jet spray, fitted to EWC, complete all as specified and directed.

S&F PVC (SWR) vent cowl 110mm dia, complete all as specified and directed.

S&F in repairs stainless steel Soap dish and fixed to walls with necessary screws etc., complete all as specified and directed.

M&L 100mm dia cast iron floor trap/nahani trap with grating including jointing to waste pipe fixed in PCC (1:2:4), type B-1, complete all as specified and directed.

S&F brass chromium plated bottle trap of 32mm bore for wash hand basin with inlet and outlet screwed for pipe or connections including necessary packing, union and cap, complete all as specified and directed.

M&L for filling of cement mortar in grith of rain water pipe, nahni traps/water out lets etc in bath rooms/kitchen and toilets in CM (1:3) by using water proofing compound as per manufacturer's instruction (wpc shall be measured and paid seperately) and making good finishes against leakages and seepage, complete all as specified and directed. .

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc., complete all as specified and directed.

M & L for brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in CM (1:6), complete all as specified and directed.

Taking down cement plaster of any description on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc., complete all as specified and directed. (Note: plastering work at any height and necessary scfolding, safety belts to be provided by the contractor)

M&L for rendering 15mm thick in CM (1:4) on brick/stone masonry using water proofing compoun as per manufacturer's instruction, surfaces finished even and smooth without using extra cement (WPC shall be measured and paid seperately), complete all as specified and directed.

Supply only integral liquid water proofing compound of approved quality (ISI Marked), complete all as specified and directed.

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:6) and finished even and smooth without using extra cement, complete all as specified and directed.

M&L for preparing surfaces of newly plastered or unplastered wall surfaces and applying two coats of oil bound distemper over a coat of chalk whitening primer, complete all as specified and directed.

M&L for preparation of newly plastered wall/pillasters/vertical surface and applying two coats of cement base paint over a coat of alkali resistance primer, complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons and wall/dado etc, complete all as specified and directed.

M&L for 18mm to 20mm thick granite slab (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed. .

M&L for machine cut kota stone slab flooring and shelves 20-25mm thick laid over cement screed base of 15mm thick in CM (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed.

M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed of 10mm thick in CM (1:4) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed. Note: Kota stone slab to be provided to treads of steps shall be in one piece with rounding off edge on front face.

M&L for rounding to edges of stone slabs kota stone/marble one edge, such as in steps, cooking platform, and other similar situations, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed. .

M&L for coloured glazed ceramic tiles of size 350x 250x 7mm/ 450X 350X 7mm thick on vertical surfaces such as skirting, dados and risers to steps etc, set and jointed in neat cement slurry to match the shade of the tile including 10mm thick backing coat in CM (1:4), complete all as specified and directed.

S&F non - skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of cement mortar (1:6), 15mm thick for laying floor finishes, complete all as specified and directed.

M&L for vitrified ceramic tiles 8 to 10mm thick (square/ rectangular), light shade, polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement including screed bed or bedding layer of cement mortor (1:4), 15mm thick for laying floor finishes, complete all as specified and directed. .

Taking out/stiping out of loose/damaged/broken concrete of all existing roof treatment including concrete padding and benching including hacking for key, scrubbing down with water for receiving plaster without damaging existing serviceable structure complete to receive new roof treatment including rubbish off the premises upto a distance exc 50 mtr but n.exc 200 mtr, complete all as specified and directed.

M & L for 20mm thick screeding or bedding layer in CM (1:4) over concrete surfaces to bring a uniform smooth surfaces using extra cement (for laying memeberane treatment) mixed with liquid water proofing compound as per manfuacture's instructions, complete all as specifed and directed. (Note : The rates are included cost of sealing admixture chemical. The proportion of mix and method of mixing of approved concrete admixture shall be adopted and applied as per manufacturer's printed instructions)

M & L for providing APP based membrane roof treatment in layers with the following provisions:- (i) Applying one coat of bitumen primer evenly @ 0.3 Kg/Sqm as priming coat to prepared surface till the surface is properly impregnated and the solvent oil in the base primer shall be allowed to evaporate completely. (ii) A layer of APP based polymeric membrane 3mm thick (minimum), wt 3.5 Kg/Sqm reinforced with polyester non woven fabric matt (weighing not less than 150 gms/Sqm) shall be applied over bituminous primer as specified above the application of polymeric membrane shall be by torch application method. The overlap shall be min 100mm on the transverse direction and 75mm on longitudinal direction.

M&L for applying silicon sealent on cracks/joints in walls, cills, jambs, roofs etc. at any location, complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for drain etc., complete all as specified and directed.

M&L for 75mm thick PCC (1:3:6), type C-2 (using 40mm graded crushed stone aggregate) as in sub base etc, complete all as specified and directed

M&L for 40mm thick PCC (1:2:4), type B-1 (using 20mm graded crushed stone aggregate) as in floor finish, surface finished even and smooth without using extra cement, complete all as specified and directed.

S&F for anodised aluminium snap grid 600 x 600mm panel size with aluminium T section of size 28 x 25 x 1.50mm thick for main runners, 25 x 25 x 1.3mm thick for cross runner and angle size 25 x 25 x 1.50mm thick along with wall suspended with and including 4 mm dia, Galvanized mild steel wire as in suspenders of ceiling members fixed in proper position including 6mm thick non asbestos fibre cement building E board for fixing in 600 mm x 600mm grid, fixed to aluminium frame work with screws on snap grid including taking down old unserviceable ceiling of any description, all as required at site, complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting any gauge thickness including nainital or similar pattern roof covering, complete all as specifed and directed.

S & F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick having tensile strength of 550 Mpa as in roof covering/clading to wall, fixed with self taping screws, complete all as specified and directed. .

S & F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick having tensile strength of 550 Mpa as in roof covering/clading to wall/eaves board/gutter, ridge, valley etc., fixed with self taping screws, complete all as specified and directed. .

Hacking out old broken glass of any thickness, size, quality or description from metel frame including punching or drilling our old glazing pins/spring clips etc., complete all as specified and directed.

M&L for 4mm thick figured glass, pin head type and glazing with oil putty in squares n. exc. 0.5 Sqm in each pane, complete all as specified and directed.

M&L for 4mm thick sheet glass (plain) ordinary quality and glazing with oil putty in squares n. exc. 0.5 Sqm in each pane, complete all as specified and directed.

S&F in repairs galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.00mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.

S&F framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165, complete all as specified and directed

Taking down chowkat or frames with shutter (without taking off shutters from the frames) n.exc 1.5 Sqm each, complete all as specified and directed. .

S&F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tubes, as per specifications and drawing, complete all as specified and directed.

S&F factory made solid PVC door shutter 30mm thick (stiles), consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, complete all as specified and directed.

S&F 100mm size medium weight cold rolled stainless steel butt hinges, complete all as specified and directed.

S&F for 150mm size aluminium, anodized barrel tower bolts of extruted section and fixed, complete all as specified and directed.

S&F for 150mm size extruded aluminium door handles fabricated type, complete all as specified and directed. .

Repairing of MS gate parts of any size and shape (max 6m span each gate) such as balls/bearing for sliding gate and welding of hinges in position to make it serviceable, complete all as specified and directed.

Taking out sludge including blockage and cleaning of the MH of any size, any description, depth n exc 1.50m each, removing and depositing sludge at a distance not less than 20m in a ditch including necessary excavation of pits and covering with earth, over bamboo mesh & spraying unslaked lime on the covered ditch, as well as around the manhole to make hygienic including necessary flushing of manhole with water after desludging, complete all as specified and directed Note: The cost of excavation and earth work for pit, covering of ditch and providing sufficient bleaching powder shall deemed to be included in the unit quoted rate.

Dewatering/desludging & cleaning of septic tank of any depth, any size, taking out water mixed with sludge and solid including any foreign materials such as stones, tree hedges etc, removing and depositing sludge at a distance not less than 20m in a ditch including necessary excavation of pits and covering with earth, over bamboo mesh & spraying unslaked lime on the covered ditch, as well as around the septic tank to make hygienic, complete all as specified and directed Note: The cost of excavation and earth work for pit, covering of ditch and providing sufficient bleaching powder shall deemed to be included in the unit quoted rate.

Cleaning of blockage in sewage lines/drain pipes of the internal dia 100mm/150mm/200mm by rodding or by any other suitable means, cleaning the entire line and well flushing with water between the manholes, complete all as specified and directed

Cleaning of blockage in WC's and soil pipes of any dia up to first manhole by rodding or by any other means and well flushing, with water, the entire line after cleaning, complete all as specified and directed

Cleaning of blocked floor/gully/nahani trap in bathroom/kitchen/wash basin etc and soil waste pipe of any dia upto gully traps by using rubber hand pump or rodding and opening the eye and making the line clear for smooth function, complete all as specified and directed.

Demolition of reinforced cement concrete (reinforcement shall be cut as required to facilitate demolition) of any description and in any position including disposal of unserviceable materials, debris and rubbish to a distance not exceeding 100m, complete all as specified and directed.

M & L for precast reinforced cement concrete (1:2:4), type B-1 (using 20 mm graded stone aggregate) as in cover slabs (for manholes etc) and similar articles with plain faces and set in cement mortar (1:4), complete all as specified and directed.

S & F mild steel TMT bars 6mm to 8mm dia., cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia., or securing with clips quality confirming to Fe-410-S 0r Fe-410-O, complete all as specified and directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, pillars etc.,and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 100m, complete all as specified and directed.

M & L for brick work with sub-class ‘B' bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar (1:4), complete all as specified and directed.

M & L for PCC (1:2:4), type B-0 (using 12.5mm graded crushed stone aggregate), cast in situ in copings, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating as directed including use and waste of form work, complete all as specified and directed.

M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:4) and finished even and smooth without using extra cement including mixing of water proofing compound, as per manufacturer's instructions (wpc shall be measured and paid seperately) , complete all as specified and directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 round section) in PCC (1:2:4) type B1 (using 20mm graded crushed stone aggregate), smooth finished and reforming benching as required for 150mm bore pipe, complete all as specified and directed.

Demolition and breaking up 150mm bore drain pipes (Salt glazed ware, AC or reinforced concrete set in cement mortar, separation of serviceable materials from the unserviceable, stacking the serviceable materials and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 100m, complete all as specified and directed

M & L for PCC (1:3:6), type C 2, (using 40mm graded crushed stone aggregate) in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested, for 150mm bore pipe, complete all as specified and directed.

M & L for 150mm bore salt glazed stone ware drain pipes, grade “A”, laid in trenches, jointed in cement mortar and tested, complete all as specified and directed.

Note: An amount of Rs.33845.00 on account of Credit Schedule for schedule 'A' part - II shall be deducted from the total amount of BOQ to arrive at the contract sum.

M/S DEY ENTERPRISE

M/S I P GROUP

M/S. JAGDISH PRASAD AGARWALA

M/S SARKAR ELECTRIC

M/S ANNI ENTERPRISE

MAA TARA TRADING

M/S ASHOK ENTERPRISE