Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹46.3 LAccepted-AOC | L1 | Accepted-AOC Completed | |
| 2 | L2₹48.6 L+₹26,930 (0.56%)Rejected-Finance | L2 | Rejected-Finance 2nd Lowest | |
| 3 | Rejected-Technical | - | Rejected-Technical no |
Tender Value
Refer Docs
EMD Value
₹92,000
Closing Date
30 Aug 2022, 2:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer Division No-IHPPWD Shimla-3
Executive Engineer Division No-IHPPWD Shimla-3
Construction of Sub way Near Himland Hotel on MRR via Chotta Shimla between Rd.. 150/675 to 150/690 (Under Smart city Project
2022_PWD_63859_2
SD-I-CTR-Tender-9918 dated 16-08-2022
Open Tender
Civil Works
Item Rate
90 days
himlnad
AS per SBD
14 documents required · 14 mandatory
₹2,000
₹92,000
17 Oct 2023
24 Aug 2022
31 Aug 2022
24 Aug 2022
30 Aug 2022
24 Aug 2022
Amount
Cutting and disposal of earth work in by mechanical in all heights and depths in all kinds of soils, including saturated soils comprising of pick work, jumper work and blasting work both in soft and hard rock with chiseling and wedging out of rock (where blasting is prohibited) and their intermediate classification of soils including, dewatering wherever required, setting of to the required lines, levels as shown on the drawing and directed by the Engineer -in-charge at site., according to the HP.PWD. specification of 1990 (one thousand nine hundred ninety) volume-I (one) and sorting out useful and unuseful material and transportation of the unuseful material for disposing at dumping site as per satisfaction of Engineer- in -charge through all modes of transportation including head load ,animal load or mechanical means along with its leveling fine dressing and with all kinds of labour, machineries, tools equipments and safety measures and incidentals necessary to complete the work by mechanical means and labour ( if required ). All the surplus excavated earth to be dumped at dumping site(dumping sites will be arranged by the contractor on his own cost). Any loss to the public and private propriety, human being, machinery during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have to be duly compensated by him in all respects including all incidental charges.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i)1:5:10 (One cement : five fine sand : ten graded stone aggregate 40mm (forty milimetre) nominal size)
Centering and shuttering including strutting, propping etc. and removal of form for including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (a)Foundations, footings, bases of columns, etc. for mass concrete.
(b) Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
( c) Suspended floors, roofs, landings, balconies and access platform
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i)1:1.5:3 (one cement : one point five coarse sand): three graded stone aggregate 20 mm (twenty milimetre) nominal size)
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i)1:1.5:3 (One cement : One point five coarse sand) : three graded stone aggregate 20 mm (twenty milimetre) nominal size)
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (One cement : One point five coarse sand) : three graded stone aggregate 20 mm(twenty milimetre) nominal size) including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i)Mild steel and Medium Tensile steel bars
12 mm (Twelve milimetre) cement plaster of mix including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i)1:4 (One cement: four coarse sand)
Finishing walls with water proofing cement paint of required shade including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.(i)New work (Two or more coats applied @ 3.84 kg/10 sqm( three point eight four kilogram/ ten square metre))
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i)1:3:6 (one Cement : three coarse sand) : six graded stone aggregate 20mm (twenty milimetre) nominal size)
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.
Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x 9.8mm(three hundred into three hundred into nine point eight milimetre) having with water absorption less than 0.5% (zero point five percent) and conforming to IS:15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm (twenty milimetre) thick base of cement mortar 1:4 (one cement : four coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.
Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm (eight milimetre) diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.
Providing weapholes in brick masonry / stone masonry /plain reinforced concrete abutment, wing wall, return wall with 100 mm(One hundred milimetre) dia PVC pipe extending through the full with of the structures with slop of 1(v):20(H) towards drawing face complete as per drawing and technical specification clauses 614, 709, 1204.3.7 including carriage of materials in all leads and lifts as per the directions of the Engineer-in-Charge.
Backfilling behind abutment, wing wall and return wall complete as per drawings & technical specification Clause 1204.3.8 including carriage of materilas in all leads and lifts as per directions of the Engineer-in- Charge.(i) Granular material
Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of encapsulated lens type reflective sheeting vide Clause 1701,2.3. fixed over aluminium sheeting, 1.5mm(One point five milimetre) thick supported on M.S. pipe 47mmx47mm(forty seven milimetre into forty seven milimetre) Square pipe firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450mmx450mmx600mm (four hundred fifty milimetre into six hundred milimetre) below ground level as per drawings and Technical Specification Clause-1701 including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 600mmx 450mm (six hundred milimetre into four hundred fifty milimetre)Rectangular.
Neelam Kumar
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .