SPL REPAIR TO SWIMMING POOL OF 9 IDSR AND PROVN OF 01 X TOILET BLOCK NEAR OR LINE BLDG NO E-23 UNDER AGE B/R-III OF GE(SOUTH) MEERUT CANTT

Amount

Taking down of chowkhat with shutter (without taking off shutters from the frame) area n. exc 1.50sqm each complete all as specified and directed.

Taking down of chowkhat with shutter (without taking off shutters from the frame) area exc 1.50 sqm but not exceeding 4.0 sqm each complete all as specified and directed

S & F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 45x85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed.

S & F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65x125mm (Double rebates) comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed.

S & F for 30mm thick Factory made single extruded WPC (Wood Polymer Composite) solid Moulded WPC door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. Note: stainless steel butt hinges and necessary S S screws shall be paid separately

S&F factory made 30mm thick 100% solid WPC (Wood polymer composite) plain wiremwsh Door Shutter of required size comprising of virgin PVC resin of K value 57-60 (Suspension Grade), calcium carbonate and natural fibers (Wood Poweder/ rice husk/ wheat husk) and Non toxic additives, made from extrusion process WPC foam sheet single Extruded (inner) with having minimum density not less than 650 Kg/cbm manufactured an ISO 9001-2015 certified company having good screw holding capacity (Screw withdrawal strength of 2000N (Face) & 1100N (Edge), Minimum compressive of 50 N/mm2, modulus of elasticity 850N/mm2 and resistance of spread of flame of class A category with property of being Termite/Borer free. water/moisture proof and fire retardant for fixing mosquito mesh and XTN aluminium mesh combinly panel area of door except stiles and rails to be panelled with mesh with self tapping round headed screws at required distance, screws and edges covered with feathered pvc edge beading all around of mesh and fixing stainless steel butt hinges of required size with necessary full body threaded counter sunk SS screws incl stainless steel wire cloth 0.36mm nominal dia of wire and avg width of aperture 1.40mm. All as per direction of Engr-in-Charge mtrl test certified and authentication should be complusry provided by the manufacturing company for Internal/Balcony/Main Doors.

M&L for powder coated aluminium anodised window sliding type (3 shutters type) with sash bars, aluminium sections weighing 0.55 Kg/m(min) including stainless steel wiremesh , necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading,screws suitable anodised fittings such as, hinges, handles, including anodised aluminium frame, with one or more rebates including S&F 5 to 6 mm thick black glass including taking down existing window complete all as specified and directed.

S&F Box type steel window comprised of tubular frame and shutters made out of 1.25mm thick MS Sheet tube with double side shutters wire gauged shutter & glass glazed shutter (wire cloth and glass panes only shall be measured and paid seperately) with side hung shutters with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts 150mm long for each leaf and 10mm square bar grills at spacing as shown on drg welded to FI frame work, including other fittings, hinges, handles, tarred hold fasts, PCC blocks etc as including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed.

Supply & fix 3mm thick sheet glass, ordinary quality glazing with oil putty or fixed with wooden beads or in steel windows in square n.exc. 0.50sqm each pane incl one coat of synthetic enamel paint to oil putty complete all as specified & directed.

Supply & fix galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified & directed.

S&F Mild steel sliding door bolt 300 long plate type stove enamelled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate all as specified & directed

S&F Stainless steel butt hinges 100mm in size complete all as specified and directed.

S&F mild steel barrel tower bolt stove enameled black with bright bolt 200 mm longcomplete all as specified and directed.

Supply and fixing mild steel pressed handles oval type stove enamelled black of size 125 mm complete all as specified and directed.

Supply and fixing for mild steel framed work as in doors / windows or gates of angle, with gusset plates, rails, braces, etc. complete drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or toeht covering runnign rails and guides) and hanging also fastening and fixing complete conforming to Fe 410-W (Gde-E-250) quality A complete all as specified and directed

S&F 1mm thick mild steel plain, black sheet in wall cladding, steel gates and similior work, cut to size, holes, punched, including round headed screws, clout nails or rivets and fixed to wood or steel framing witn plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc complete all as specified and directed

S&f Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

Supply and fix glass corner shelf fancy type made of 6 to 7 mm thick sheet glass of size 250mmx250mm fixed with chromium plated brackets complete all as specified and directed.

Supply and fixing in repair 15mm bore bib tap fancy type chromium plated long body cast copper alloy screwed down for iron pipes or for brass ferrule complete all as specified and directed.

Supply and fixing in repair 15mm bore pillar taps cast copper alloy fancy type chromium plated screwed down high pressure with or without lettered HOT or COLD with long screwed shanks and fly nuts screwed for iron pipes complete all as specified and directed.

Supply and fixing in repair 15mm bore stop valve/concealed fancy type chromium plated cast copper alloy screwed down high pressure screwed both ends for iron pipe or for union complete all as specified and directed.

Supply & fix in repair chromium plated, ABS plastic with stainless steel tube with PVC holder jet health faucet fixed in WC seats complete all as specified and directed.

Supply and fixing PVC connections 15mm bore, 450 mm length with PTMT nuts complete all as specified and directed.

Supply and fixing in repair PVC valveless, syphonic action type, flushing cistern, 10 ltr capacity, low level, white, with inlet, ball valve, float and handle including brackets and 32mm bore PVC bend including connection to IWC/EWC and fixing on wall with brackets complete all as specified and directed.

Supply and fixing in repair vitreous china squatting pan white orissa pattern size 580x440mm with integral foot rests (excluding flushing cistern & flush pipe) with cast iron P trap including lime concrete bedding and making good the disturbed portion to match with the existing surface of floor complete all as specified and directed.

Supply and fixing in repair vitreous china wash down water closet pan (Pedestal Pattern) white excluding flushing cistern and flush pipe including connection to out going pipe and flushing pipe with 'S' Trap complete all as specified and directed.

Supply and fixing plastic water closet seat, white/black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device complete all as specified and directed.

Supply and fixing in repair vitreous china wash basin white flat back size 580x 450mm excluding taps but incl 32mm dia CP waste fitting and PVC waste pipe 610 mm long and brackets complete all as specified and directed.

Taking down steel tubing and connections incl cleaning for refixing or removal from site for 15 mm bore pipe complete all as specified and directed.

All as per item No 31.00 here-in-before but for 20 mm bore pipe complete all as specified and directed.

Supply and fixing 15 mm bore Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc complete all as specified and directed.

All as per item No 33.00 here-in-before but for 20 mm dia complete all as specified and directed.

Supply and fixed in repair vitreous china urinal, Half stall type,white with grating, union for discharge pipe, flush pipe and waste pipe, CP urinal Spreader fixed to water supply pipe etc complete all as specified and directed.

Supply and fixing in repair 125mm size cast copper alloy chromium plated shower rose fancy type fixed to 15mm bore pipe complete all as specified and directed.

Supply and fixing in repair brass chromium plated tubular towel rail 20mm dia ‘D’ type 60 cms long between flanges complete all as specified and directed.

Supply and fixed in repair Toilet paper holder with flat recessed type stainless steel complete all as specified and directed.

S&F in repair steel CP grating 100/125mm dia including waste hole where required at site complete all as spd & directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Supply and fix non skid glazed ceramic tiles(any shade) 400mmx400mmx7mm to 8mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floor over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

Material & labour for coloured glazed ceramic tiles of approved shade of size 450mm x300 mm x 7 to 8 mm thick as on vertical surface such as skirting/Dado etc set and jointed in white or coloured cement to match the existing surfaces laid over and including 10mm thick rendering in CM 1:4, complete all as specified and directed.

Supply & fix Light shade vitrified tiles coloured superior quality 600mm x 1200mm x 8 to 10mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floor including 15mm thick screed in CM 1:4 and all as per manufacturer's instruction complete all as specified and directed.

All as per item No 42.00 here-in-before but in skirting / dado and including 10 mm thick rendering in CM1:4 complete all as specified and directed.

M&L square edge digital tiles antiskid (blue shade) 300mmx300mmx10mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floor over & including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for coloured glazed ceramic tiles of approved shade of size 300mm x600 mm x 7 to 8 mm thick as on vertical surfaces such as skiriting/Dados etc set and jointed in white or coloured cement to match the existing surfaces laid over and including 10mm thick rendering in CM 1:4, complete all as specified and directed.

M&L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete to match laid over and including 20mm thick screed bed in CM (1:4) complete all as specified & directed.

Demolition & breaking up drain pipe (PVC/AC/salt glaze ware) for 100mm/75mm dia complete all as specified and directed.

S&F 75mm dia bore pipe complete all as specified and directed.

Supply & fix in repair 75/110mm dia outlet PVC (SWR) floor trap/tee/elbow, plain with grating including jointing with solvent cement complete all as specified and directed.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings. Note:- All scaffolding and safety arrangement will be done by the Contractor at site complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified etc complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for framed work complete all as spd & directed.

M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) Fe 410-W (Gde-E-250) quality A including distance pieces, nut bolts and cleats etc. complete all as specified and directed.

M&L for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, Fe 410-W (Gde-E-250) quality Awithout any attachment complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) or insulation boards / slabs / blankets any thickness including cover fillets complete all as specified and directed.

S&F 6mm thick Hollow insulated PVC wall lining consisting of PVC insulated panels having expended polystyrene (EPS) fitted into the wall by using nails etc complete all as spd & directed.

S&L for anodised aluminium snap grid frame work of size 605 x 605 mm, for false ceiling comprising 40 x 25 x 2mm aluminium angles weight 0.36 kg fixed all along the wall at ends and with aluminium main and cross tee of size 36.50 mm x 25 mm x 1.4 mm weith not less than 0.24 kg per RM including aluminium cleat bolts nuts and washers and 4mm dia GI wire suspenders in alternates panel and preparing holes / chases in wall for fixing angle including fixing suitable for non asbests fibre cement boards in ceiling complete all as specified and directed.

M&L for 4 mm thick Armstrong ceiling boards 600 x 600 mm, fixed or laid / inserted to timber / GI / Aluminium frame work with screws in ceiling and applying three coat of white wash including preparation of surface complete all as specified and directed.

Demolition of brick work built in cement mortar of any description complete all as specified and directed.

M&L brick work with sub class' B' bricks(except bricks) of old size, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L brick work with fly ash bricks in CM 1;6 brick straight or curved on plain exeeding 6m mean radius complete all as specified and directed.

Taking down cement or cement lime plaster on brick or stone walls, etc including racking out joints, hacking for key, scrbbing down with water etc complete all as specified and directed.

M&L for applying 15mm thick rendering using ready mix plaster bags on brick or concrete surface of external wall finished even and smooth. Note: contractor is required to deposite ready mix bags for 100% CM quantity to Engr-in-Charge with in 15 days issue of work order No 01.

M&L for applying 15mm thick rendering using ready mix plaster bags on brick or concrete surface of internal wall finished even and smooth. Note: contractor is required to deposite ready mix bags for 100% CM quantity to Engr-in-Charge with in 15 days of issue of work order No 01.

M&L for applying 5mm thick rendering using ready mix plaster bags on brick or concrete surface of ceiling finished even and smooth. Note: contractor is required to deposite ready mix bags for 100% CM quantity to Engr-in-Charge with in 15 days of issue of work order No 01.

M&L preparation of new plastered surface of wall by applying 3mm thick wall care putty and making the surface smooth and applying two coat of oil emulsion distemper using roller for painting complete all as specified & directed.

M&L preparation of old surface after complete removal of existing treatment by mechanical means and applying 3mm thick wall care putty and making the surface smooth and applying two coat of oil emulsion distemper using roller for painting complete all as specified & directed.

M& L preparing plastered new surfaces of ceiling and applying 3mm thick wall care putty and two coats of oil emulsion distemper on ceiling surface complete all as specified and directed.

All as per item No 69.00 here-in-before but one coat on old ceiling surface complete all as specified and directed.

M & L preparation of new plastered surface of wall and applying two coats of exterior emulson paint (weather proof) using roller over and including applying 3mm thick putty after finishing the wall surfaces complte all as specified and directed.

M&L applying two coats of exterior emulson paint on old surface (weather proof) using roller over and including 3mm thick putty after scraping surface by mechanical means and finishing the wall surfaces complte all as specified and directed.

Demolition of cement concrete (reinforced) in ground floor and pavings n exc 15 cm thick ( above or below GL)complete all as specified and directed.

S&F mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Supply & fix mild steel TMT bars 6 to 8 mm dia and over, cut to length, bent to shape required as in stirrups complete all as specified and directed.

M&L RCC 1:2:4 Tybe B1 nominal mix (using 20 mm graded stone aggregate) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete complete all as specified and directed.

Dismantling existing water tanks capacity exc. 500 ltrs but n exc. 1000 ltrs, removing from site complete all as specified and directed.

S&F 1000 litres capacity rotational moulded polyethylene water storage tanks three layered (cylindrical, vertical in closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified & directed.

S&F in repair PVC ball valves, high pressure with polyethylene float and fly nut complete screwed for iron pipe 20mm bore complete all as specified & directed.

S&F in repair 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repair for 20 mm dia mild steel powder coated curtain rods with wall thickness 1 mm including mild steel powder coated, bracket, holding and funnel on ends as fixed in repairs complete all as specified and directed by Engr-in-charge.

Material & labour for hardcore of broken bricks gauges n.exc. 63mm, deposited spread and leveled in layers n.exc. 15 cm thick watered and rammed to a true surface complete all as specified and directed.

M&L Cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) in foundations, filling and mass concrete including sub base of floors complete all as specified and directed.

M&L for providing PCC 1:3:6 type C1 (using 20mm graded stone aggregate) filling in pressed door chowkat/hold fast blocks complete all as specified and directed.

M&L for providing PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in floor/plinth protection complete all as specified and directed.

M&L in repair for laying 60 mm thick machine pressed precast PCC coloured interlocking paver block moulded in PVC frame / mould any shape and size conforming to IS 15658-2006 of M-35 grade of approved design with gray cement and pigment to match shade / colour / matrix of tiles set and bedded over and including 25mm thick fine river washed sand duly compacted with surface vibrator laid over compacted sub soil in flooring complete all as specified and directed.

Taking down old existing water proofing treament from the top of RCC/arch slab, including taking down existing PCC padding or plaster and hacking the top of RCC slab, cleaning with water and disposal of rubbish off the premises. Complete all as specified and directed.

M&L for providing 40mm thick average thickness of PCC 1:2:4 type B-1 (using 20mm graded aggregate) as in padding or roof finished even and fair without using extra cement.Complete all as specified and directed.

M&L 20mm thick screed bed in cement mortar 1:4 as on roof surface, mixing with water proofing compound @3% of cement consumed or as per manufacturer's instructions complete all as specified and directed. Note- WPC consumed under this item shall be measured & paid separately under relevant item of Sch 'A'.

M&L for cleaning of concrete or plastered surfaces of roof and applying priming coat using with bituminous primer @ 0.30 kg/sqm followed evenly by a tack coat @ 1.20kg/sqm using 85/25 grade industrial hot blown bitumen, over it laid with 3mm thick APP modified polymeric water proofing membrane weight 3.6 kg/sqm reinforced with non-woven polyster fabric (weight not less than 160 gm/sqm) unrolled & bonded to substrate with side and end laps 75mm & 100mm as per manufcturers instruction and applying over it a tack coat using 85/25 grade industrial hot blown bitumen @ 1.20kg/sqm and finally finished the top of polymeric water proofing membrane with a coat of bitumen aluminium paint @ 0.20kg/sqm as per manufacturers instructions. Complete all as specified and directed.

M&L 75 mm thick cement concrete type C-2, 1:3:6 (40 mm graded aggregate) finishing cement concrete surface even and smooth without using extra cement as in plinth protection sub base etc complete all as specified and directed.directed.

M & L repair to overhang portion of chajja, facia, dropwall etc. for continuous work by providing PCC(1:2:4) Type B-0 and finished with CM(1:3) after taking down of damaged portion of RCC work by maintaining same level and finished the surface to match with the existing surface by providing same finish. (Height of work to be considered upto 3.5m from FFL) (Note : Wherever reinforcement is required to be provided will be paid separately under relevant item and contractor have to inform the department one day in advance after binding of reinforcement for measurement otherwise no payment will be considered on this account) complete all as specified and directed.

Surface excavation n.exc. 30cm deep and averaging 15cm deep and getting out in soft/ loose soil complete all as specified and directed.

Excavation in trenches not exc. 1.5 metre wide and not exc. 1.50 metre in depth for foundation etc and for manholes etc n.exc. 10 Sqm on plan and n.exc. 1.5 metre depth and getting out in soft/loose soil complete all as specified and directed.

Removing excavated materials (soils) to a distance not exc. 50 metre and depositing where directed at a level not exc. 1.50 above the starting point complete all as specified and directed.

Returning filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick as in soft/loose soil complete all as specified and directed.

Treating the top surface of filled earth at the rate of 7.50 litres of emulsion per square metre of surface complete all as specified and directed.

Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the substructure in contact with backfill to be measured) complete all as specified and directed.

Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed.

Material & labour for approved soil filling under the floor, spreading and levelling in layers n.exc. 25cm thick, well ramming including watering as required complete all as specified and directed.

Use and waste of Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

Use and waste of Form work of sides of pillars, posts, struts, piers, columns etc square or rectangular or polygonal rough surfaces of concrete complete all as specified and directed.

M&L Form work to sides and soffits of beams lintels etc finished rough complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick flat fair finished surfaces of concrete complete all as specified and directed.

M&Lfor form work to the edge of concrete flat n. exc 200 mm thick complete all as specified and directed complete all as specified and directed.

M & L RCC 1:2:4 Type B1 nominal mix (using 20 mm graded stone aggregate) as in Columns, pillars etc complete all as specified and directed.

M & L RCC 1:2:4 Type B1 nominal mix (using 20 mm graded stone aggregate) as in beams, lintels over 1.5 m span etc complete all as specified and directed.

M&L for RCC 1:1.5:3 (using 20 mm graded stone aggregate) for roof slabs supported on walls, beams and the like complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

Material & labour for 15 mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces, surfaces finished even and smooth without using extra cement complete all as specified and directed.

Material & labour for 15 mm thick rendering on other than fair faces of brick work or concrete surfaces,in CM(1:4) surface finished even and smooth without using extra cement complete all as specified and directed.

Material & labour for 5 mm thick rendering in CM 1:3 on ceiling surfaces, surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls etc and applying two coats of cement base paint over one coat of primer complete all as specified & directed.

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified & directed.

M&L for padding in PCC 1:2:4 type B0 (using 12.5mm graded stone agg) laid to a minimum consolidated thickness 50mm to provide a finished slope 1:30 complete all as specified & directed.

M&L flat iron hold fast 25mm x 6mm welded to angle iron door frame complete all as specified & directed.

Mild steel angle iron door frame, lacings,bracings size 50mmx50mmx6mm conforming to Fe 410-0 incl 12mm dia deformed bars for strengthing at bottom of chowkhats incl 2mm thick plain black sheeting and cutting floor at bottom to accommodated strengthing bars & making good the floor in PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) to match the existing floor complete all as specified & directed.

Supply & fix 125mm size aluminium alloy handles cast type anodized complete all as specified & directed.

S&F aluminium tower bolts 150mm long, of extruded section complete all as specified and directed.

Supply & fix Aluminium. Sliding door bolts, plate type, complete, 250mm long complete all as specified and directed.

M&L preparation of new or previously untreated steel surface of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Supply and fixing PVC waste pipes of 40/32mm bore suitable for wash hand basins/sinks complete all as specified & directed.

S&F for 110 mm bore PVC floor traps plain with grating and 300 mm long out let including jointing with cement concrete type B -1 1:2:4 complete all as specified & directed.

Supply and fix PVC bends 110mm bore, any radius complete all as specified & directed.

Supply & fix steel windows or ventilators fixed type, complete all as specified & directed.

S&F mild steel work as for framed work such as grills gratings, etc., with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed baluster; walk ways; railings; framed work of water tanks and similar work including necessary riveting and / or welding conforming to Fe 290 (Gde-E 165) complete all as specified and directed.

Supply & fix in vitreous china wash hand basin, white, flat back of size 550x400mm (excluding taps, waste chain and plug and porcelain stopper) but including brackets suitable for 15mm dia pipe complete all as specified & directed.

Supply & fix angular valve, 15 mm dia, cast copper alloy, chromium plated, fancy type with long shank and cup, screwed down, high pressure screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified & directed.

Supply & fix rotational moulded polyethylene water storage tanks 500 liters capacity, three layered (cylindrical, vertical in closed top) hoisted and fixed in position with all fittings all as specified including dismantling existing water tanks complete all as specified & directed.

Supply & fix 15mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including testing complete all as specified & directed.

Supply & fix 20 mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including testing complete all as specified & directed.

Supply & fix 3mm thick sheet glass, pin headed, and glazing with oil putty/beading in square not exceeding 0.50sqm each pane complete all as specified & directed.

S&F Flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern complete all as specified and directed.

S&F PVC (SWR) pipes 110 mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors

S&F PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

PVC (SWR), junction single, (Single T) equal or unequal 110 mm bore complete all as specified and directed.

M & L Soakage wells excavation in ordinary soil, foundation in PCC 1:3:6, type C1 (using 20mm graded stone aggregate) walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM 1:6 RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 1.8m dia & 4.5m depth complete all as specified in drg No TD-306, Sheet No 1/4 to 4/4 and as directed by Engineer-in-Charge.

M & L Septic tanks, exc in ordinary soil, foundation in PCC !:2:4, brick work in CM 1:4 RCC slab covers including RCC precast manhole cover having 6 mm plate embedded all round / fibre reinforced cover with iron frame Vent shaft and sludgechambers etc, complete for 25 users complete all as specified in drg No TD-217 Sheet No 1/7 to 7/7 and as directed by Engineer-in-Charge.

M/L 75 mm thick cement concrete 1:4:8 type D-2 using (40 mm graded stone agg) as in sub base complete all as specified and directed.

S&F Pre-cast cement concrete block masonry 1:2:4 Type B-1 (using 20mm graded stone aggregates) with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6, complete all as specified and directed.

Taking down carefully any type of battens or conduit point wiring with conduit (light, fan, socket or power) complete including fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, pendent light fittings, MCBs / isolators, fan regulators, tube light fittings etc removing material from site and making good disturbed surfaces of walls, ceilings etc including two coats of white / colour washing / distempering etc to match the existing complete all as specified and dierected.

Material and labour for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, stranded, FRLS PVC insulated, unsheathed, copper conductor cable in & including PVC concealed conduit of any size/dia complete with all accessories/fittings, brass screws, washer etc, sunk zinc coated pressed steel terminal boxes with 3mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded copper conductor cable, unsheathed and connected to common earth and earth duly complete all as specified and directed forOne light point controlled by one, one way switch 05 / 06 Amps.

One fan point controlled by one, one way switch 05 / 06 Amps complete all as specified and directed.

One 3 pin, 05 / 06 Amps socket outlet point on independent board controlled by one, one way 05 / 06 Amps switch complete all as specified and directed.

One 3 pin, 05 / 06 Amps socket outlet point on same board controlled by one, one way 05 / 06 Amps switch complete all as specified and directed.

All as per item No 142.00 here-in-before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15 / 16 Amps socket outlet point on independent board complete all as specified and directed.

Supply and fix in repair switch piano flush type, 05 / 06 Amps single pole, one way 240 volts complete all as specified & directed.

Supply and fix in repair socket outlet 5 pin, 05 / 06 Amps flush type 240 volts complete all as specified & directed.

Supply & fixing of socket outlet 3 pin, 05 / 06 Amps and 3 pin 15 / 16 Amps (2 in 1 Multipurpose) 240 volts complete all as specified & directed.

Supply and fix in repair switch piano flush type, 15 / 16 Amps single pole, one way 240 volts complete all as specified & directed.

Supply and fixing steped type electronic fan regulator flush type on the existing sheet etc. AC, 230 volts, duly ISI marked with and including connector complete all as specified & directed by Engineer-in-Charge.

Supply & fixing lamp holder (Angular / Straight), insulated body, with back plate for batten fitting all as specified and directed.

Supply and fix LED lamp 9/10 watt complete all as specified & directed.

Supply and fix decorative LED Batten 20 Watt including rod complete aluminium housing integtrated type complete with all accessories and fixing material complete all as specified & directed.

Supplying and fixing LED tube light fitting 9/10 watt surface mounted,with extruded polycarbonate , integrated lamp & driver , with opal diffuser and decorative end plates.complete with acessories complete all as specified & directed.

Supply and installed LED security light fitting 1x45 Watt luminaries with pressure die cast aluminium housing comprising high power with PC cover with LED driver , IP-66 Protection and IK-07 Impact resistance complete IP 65 protection complete all as specified & directed.

Supply and fixing (in repair) BLDC ceiling fan not less than BEE 5 star rated , power consumption not more than 46 watts, white colour 1200 mm sweep, copper winding single phase 220 volts, 50 Hz with blade set of 3, down rod including connection with flat 3 core copper wire 1 sqmm from celing rose to connector complete with and including fan hook duly grouted on roof complete all as specified and directed.

Supplying and fixing in repair LED bulk head light fitting wall mounted with back lit LED 10 WATT watt, IP-66,complete with all acessories complete all as specified & directed.

Supply & fixing in repair ceiling rose, 3 phase/PVC/polycarbonate isolated body complete all as specified & directed.

Taking down carefully unserviceable Sub main wiring of any size and type, removing material from site to store for keeping in safe custody for reuse at site making good the disturbed surfaces of walls, ceilings etc including two coats of white / colour washing / distempering etc to match the existing complete all as directed.

Material and labour for sub main wiring with 4 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor cable with and including continuous earth wire of size 4 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of suitable size, medium grade with all conduit accessories / fittings, brass screws, washers etc and connected to common earth dolly including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified & directed.

Taking down carefully unserviceable distribution board of any capacity including wooden board and making good the disturbed surfaces of walls, etc including two coats of white / colour washing / distempering etc to match the existing complete all as specified & directed.

Supply and fixing Vertical Loadline sheet metal enclosure double door, Triple pole and neutral (TP&N vertical loadline) AC, 415 volts, 04 way, with 200 Amps rated copper bus bar and IP - 43 & IK 09 protection, with the inbuilt provison for fixing of 1 No MCCB of XT1160 frame suitable upto 160 Amp and 12 Nos MCB'S inside of DB, including 125 Amps ,18 KA 4 pole MCCB with metal door and flush to wall including grouting and cutting in existing wall and making good disturbed surface with two coats of white / colour washing / distempering etc to match the existing one complete all as specified & directed.

Supply and fixing sheet metal enclosure, Triple pole and neutral AC, 415 volts, 04 way, with 200 Amps rated copper bus bar and IP - 43 & IK 09 protection including provision for four pole isolator/mcb as incomer with metal double door and flush to wall including all cutting etc on wall and making good including two coats of white / colour washing / distempering etc to match the existing disturbed surfaces and taking down the old distribution board of any type complete all as specified & directed.

Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 4 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces complete all as specified & directed.

Supply and fixing MCB, SP, AC, 240 volts "B" series capacity of 06 to 32 Amps, 10kA and making connections complete all as specified & directed.

Supply & fixing MCB, DP (Double Pole), AC, 240 volts, B series capacity 40 Amps to 63 Amps 10kA and making connections complete all as specified & directed.

Taking out old unsv LT cable any size and Supply, laying commissioning, testing of XLPE under ground LT cable 1100 volts grade of size 16 Sqmm 4 core armoured, PVC sheathed with aluminium conductor heavy duty laid in tranchies, fixing on wall, under road crossing through protection pipe etc complete all as specified and directed

Taking out old unsv LT cable any size and Supply, laying commissioning, testing of XLPE under ground LT cable 1100 volts grade of size 35 Sqmm 4 core armoured, PVC sheathed with aluminium conductor heavy duty laid in tranchies, fixing on wall, under road crossing through protection pipe etc complete all as specified and directed

Supply / laying and fixing 40mm bore galvanised steel tubes with all fittings, light grade, laid in trenches for cable protection complete all as specified and directed.

M&L for washed river dry sand cushioning in trenches 80mm thick before laying the cable and 150mm thick after laying the cable including spreading levelling andhard punning complete all as specified & directed.

Material and labour for contineous brick edging with width equal to the depth of the brick of whole sub class 'B' bricks laid on edge complete all as specified and directed.

Supply and fix (in repair) Exhaust fan 300 mm sweep , single phase 50 HZ , speed 1400 RPM , air delivery 1300 Cumm not more than 80 watt all including making hole if required complete all as specified & directed.

Material and labour for earthing with galvanised steel earth plate electrided 600 X 600 X 6 mm thick buried in ground (earth pit not less than 2.25 mtr depth below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to GI earth lead wire 4.0 mm dia by means of bolts nuts chek nuts and washers of galvanized iron or steel earth lead wire protected by and including 15 mm dia GI pipe medium grade pipe for protection and 20 mm dia GI pipe (medium grade) for watering and connected to control switch as directed including necessary earth work as in soft/loose soil, concrete pit in PCC (1:3:6) type c1, pre cast RCC 1:1:5:3) type A1 cover slab duly reinforced with 8mm dia TMT bar @ 100 mm CC both way and 2 No, lifting handle made of 12mm dia TMT bar and set in cement mortor (1:4), funnel wire nesh, char-coal or coke and salt in alternate layer, testing etc complete all as specifide in electrical plate No. 3 of SSR Pt-1 all as specified and directed. Note:- (i) If the desired earth resistance is not found within permissible limit, shall be redone by contractor at no extra cost. (ii) Cost of GI wire 4 Sqmm and 15mm dia GI pipe medium grade upto 7.5 m is included in the rate quoted for this item.

Supply & fixing in repair industrial type SPN enclosure with a two pin and earth plug and socket complete with and including 20 Amps MCB, single pole, AC, 240 volts and flush to wall including all cuttings & chases etc on wall and making good including two coats of white / colour washing / distempering etc to match the existing disturbed surfaces complete all as specified & directed.

Supply and installed LED Flood light 50 watt die cast aluminium housing comprising high power including all needed accessories to fix it on wall/Tree/pole complete all as specified and directed.

Supplying and fixing recess mounting LED 2X2 luminaire 34/36 W CRCA powder coating housing with anti-glare diffuser new deep back lit panel metallic frame, including all acessories complete all as specified & directed.

Taking out old unsv LT cable any size and Supply, laying commissioning, testing of XLPE under ground LT cable 1100 volts grade of size 10 Sqmm 2 core armoured, PVC sheathed with aluminium conductor heavy duty laid in tranchies, fixing on wall, under road crossing through protection pipe etc complete all as specified and directed

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2KW capacity 25 ltr, BEE 5 star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and directed.

AEGIS INTERNATIONAL

VIRAT CONSTRUCTIONS

Shikha Enterprises

M/S AMAR ELEKTRO CENTRE

Sunil Enterprises

Manglam Engineers and Construction Co