SPECIAL REPAIRS TO BUILDING NO 81 66 SQAE AT CQAL AND P 31 AT ML LINES UNDER GE NORTH BANGALORE

Amount

B/R WORKS

Dismantling of single layer Mangalore pattern roofing tiles or similar tiles in roofing etc complete all as specified and directed.

Dismantling of wooden timber fillets, rails, posts, rafters, purlins etc not exceeding area of 40sq.cm in section all as specified and as directed.

Dismantling of timber scantlings in any position as in unframed work and area of 40 sq.cm and over in section all specified and as directed.

Second class hard wood clean sawn timber scantlings as in unframed work having area of 40 sq.cm and over in section complete all specified and as directed.

All as per Sl Item No. 1.003 here in before but except timber. NOTE:- Timber scantlings as obtained from Sl Item No. 1.002 shall be reused.

Rolled mild steel joist, channel, angle or tee sections grade Fe 410-W Gde E-250 quality-A, as in purlins fixed independently, with out connecting plates etc., (cut to ordinary lengths) complete all as specified and as directed.

Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws as specifed and as directed.

Pre-painted galvaniume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tenisile strenth of 550 Mpa as in ridges of roof covering and cladding to wall, pre fixed with self tapping screwes as specified and as directed.

E-grid suspended false ceiling grid system of size 600mm x 600mm with main runner 32 x 24 x 0.6mm, cross Tee 25 x 24 x 0.6mm and wall angle 22.2 x 22.2 x 0.5mm, ceiling suspended with 3mm dia GI wire hangers fixed with steel dash fastener, butterfly clips, hold down clips etc (main runner, cross Tee & wall angle of MS galvanised with PPPCGS) including 4mm thick HPSC self textured design pre primed non asbestos fibre cement building board fixed to false ceiling including one coat of oil bound emulsion distemper and dismantling of existing false ceiling with fillets of any type complete all as specified and as directed.

Taking down chowkats or frames area not exc. 1.5 sqm each with shutters(without taking off shutters from the frames) complete all as specified and as directed.

All as per Sl Item No. 1.010 above but area exc. 1.5 sqm and n.exc. 4 sqm each.

Pressed steel frames made out of 1.25mm thick MS sheet of profile 105 x 60mm for door and window frames with one rebate including lock strike plate, shock absorber, 20mm dia 60mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified and as directed.

All as per Sl Item No. 1.012 here-in-before but of size 125x60mm with double rebate.

35mm thick plain framed panelled factory made shutters with second class hardwood rail and style with lock rail and panel of 9mm BWP commercial ply with commercial vaneer on both faces. The size of rail and stile as per IS : 1003 (Part-I)1991 kiln seasoned and chemically pressure treated wood complete all as specified and directed.

35mm thick 2nd class hardwood glazed and skeleton shutters open rebated and prepared to receive glass gauze etc. (without sash bars) edge of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass etc size of members of shutters as specified in SSR part-1 section 8 clause 8.24(a) supplied and fitted to chowkats. etc complete all as specified and as directed by Engr-in Charge.

PVC door frame of size 50mm X 47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube fixing in opening as per specification complete all as specified and as directed.

Factroy made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails MS frame shall be covered with neat moulded plain colour PVC channel having a PVC sheet strip of 20mm width stuck inside the solvent cement for style and plain coloured PVC sheet for top rails, lock rails and bottom rails on either side and as gap insert for top rails and bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded to the style and rails with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing in the frame at site as per specification and as per SSR drawing all as specified and as directed

PTMT butt hinges, 100 mm long and fixed with steel screws complete all as specified and as directed.

PTMT tower bolts, 150 mm long and fixed with steel screws complete all as specified and as directed.

PTMT door handle, 150 mm long and fixed with steel screws complete all as specified and as directed.

Steel windows of box type, with frame of 80 x 60mm and 1.25mm profile sheet with box type shutters consisting of one side glazed and another side gauged shutters including projected type hinges,100mm long steel handle,100mm long tower bolt and steel peg stay all as per TD Drg -539 sheet 1/3 to 3/3 including filling the frame with PCC (1:3:6) type C0 using 12.5mm graded stone aggregate, window glass 4mm thick and stainless steel wire cloth wire cloth 0.56mm complete all as specified and directed Engineer-in-charge NOTE :- (i) Any brick work or concrete surface damaged during the process of work shall be repaired by contractor (ii) The unit rate quoted shall deemed to be include the cost of scaffolding/staging etc as required complete all as specified and as directed.

Steel ventilators of box type, with frame of 80 x 60mm and 1.25mm profile sheet with box type top hung shutter including hinges steel peg stay all as per TD Drg -539 sheet 1/3 to 3/3 including filling the frame with PCC (1:3:6) type C0 using 12.5mm graded stone aggregate, figured glass 4mm thick and stainless steel wire cloth wire cloth 0.56mm with guard bars and glazing bars complete all as specified and directed.

Stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm fixed with fixed with tinned tacks, or stainless steel staples complete all as specified and as directed.

Mild Steel work as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans and similar small articles conforming to Fe-290 Gde-E-165 complete all as directed.

Plain Cement Concrete (1:3:6), type C1 using 20mm graded stone aggregate as in hold fasts, bed blocks etc., including necessary form work complete all as specified and as directed.

Aluminium anodised barrel towel bolts of extruded section of length 200 mm all as specified and as directed.

250mm long Aluminium alloy anodised sliding door bolt (Aldrop bolt) with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed etc complete all as specified and as directed.

Mild Steel butt hinges medium weight 100mm long cold rolled all as specified and as directed.

150mm long Aluminium handles fabricated type etc., complete all as specified and as directed.

Taking down cement plaster on brick or concrete surfaces including racking out joints hacking for key, scrubbing down with water etc and disposal of debris outside MD land complete all as specified and as directed.

15mm thick rendering on brick or concrete surfaces in cement mortar (1:6) and finishing the surface with even and smooth without using extra cement complete all as specified and as directed.

Rendering 15mm thick in CM (1:4) on other than fair faces of brick or concrete surfaces, finsihing the surfaces with even and fair complete all as specified and as directed.

Preparation of new plaster surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of oil bound emulsion distemper over a coat of alkali reistant primer on wall complete all as specified and directed.

Preparation of old treated plastered or unplastered wall surfaces of any description including brooming down with steel wire brushing scrapping down smoke soot’s, moulds, moss and efflorescence, salts, trading oil and greasy spots etc and applying one coat of oil bound emulsion distemper of approved tint on walls surfaces including in narrow width, bands, cornices, pilasters etc complete all as specified and as directed.

Preparation of old treated plastered or unplastered wall surfaces of any description including brooming down with steel wire brushing scrapping down smoke soot’s, moulds, moss and efflorescence, salts, trading oil and greasy spots etc and applying one coat of cement based paint of approved tint on walls surfaces including in narrow width, bands, cornices, pilasters etc complete all as specified and as directed.

Preparation of newly plastered surfaces of walls and applying two coats of cement based paint over a coat of primer all as specified and as directed.

Preparation of old treated plastered or unplastered wall surfaces of any description including brooming down with steel wire brushing scrapping down smoke soot’s, moulds, moss and efflorescence, salts, trading oil and greasy spots etc and applying one coat of white wash on internal wall surfaces all as specified and as directed.

Preparation of new or previously untreated wooden surfaces of any description not other wise described over 10cm width or girth applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Preparation of new or previously untreated steel and iron surfaces of any description not other wise described over 10cm width or girth and applying two coats of synthetic enamel over a coat of red oxide primer, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the the premises complete all as specified and as directed.

Non-skid coloured ceramic tiles 7 to 8mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floors etc., set and jointed in neat cement slurry and pointed in coloured cement to match over screed bed or bedding layer of 15mm thick in CM (1:6) complete all as specified and as directed.

Non-skid coloured ceramic tiles 7 to 8mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.38 sqm as in floors etc., set and jointed in neat cement slurry and pointed in coloured cement to match over screed bed or bedding layer of 20mm thick in CM (1:6) complete all as specified and as directed.

Glazed coloured ceramic tiles of size 300 x 200 x 7mm thick as in vertical surfaces set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick backing coat in CM (1:3) complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc. 15 cm thickness (above ground level) and disposal of debris outside MD land complete all as specified and as directed.

Plain Cement Concrete (1:2:4), type B-1 using 20mm graded stone aggregate as in floors, 40mm thick finished even and smooth with out using extra cement complete all as specified and as directed.

Taking up or down steel tubing 15mm dia and connections including cleaning for refixing or removal to store all as directed.

Taking up or down steel tubing 20mm dia and connections including cleaning for refixing or removal to store all as directed.

Galvanised iron pipe of 15 mm dia, medium grade, laid in trenches, floors / fixed to wall with all fittings such as socket, bends, elbow, union etc., complete all as specified and as directed.

Galvanised iron pipe of 20 mm dia, medium grade, laid in trenches, floors / fixed to wall with all fittings such as socket, bends, elbow, union etc., complete all as specified and as directed.

Bib tap 15 mm bore, cast copper alloy, chromium plated, fancy type, long body with capstan head handle , screwed down for iron pipe or for brass ferrule fixed in repairs complete all as specified and as directed.

Stop valves, 15mm bore, cast copper alloy chromium plated, screwed down high pressure with crutch or butter fly handle screwed both ends or for unions etc fixed in repairs complete all as specified and as directed.

PTMT Gratings of size 125 mm dia with waste hole complete all as specified and as directed.

Rotational moulded polythene water storage tank (cylindrical vertical with closed top) with ISI mark embosed on it, hoisted and fixed in position complete all as specified in SSR part I capacity of tank 500 ltrs capacity including dismantling of existing water tank complete all as specified and as directed.

20mm dia Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed(Min weight 20mm-210 gms) all as specified and as directed.

Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including PVC(SWR) 'P' or 'S' trap connecting to flush pipe and to anti syphonage pipe, etc. complete including making good to floor fixed in repairs complete all as specified and directed.

PVC valveless, syphonic action type, flushing cistern, 10ltr capacity,low level, white, with inlet, ball valve, float and handle including brackets, connections to pipes and fixing of chain and pull, or lever, fixed in repairs complete all as specified and directed.

PVC connections 15mm dia with PTMT nuts of length of 450 mm long fixed in repairs complete all as specfied and as directed.

Vitreous china wash hand basin, white, flat back of size 630 X 450 mm excluding taps,chain and plug and porcelain stopper but including CI brackets etc., complete fixed in repairs all as specified and as directed.

Pillar taps 15mm dia, chromium plated cast copper alloy with capstan head screwed down high pressure with or without lettered hot or cold with long shank and fly nuts fancy type fixed in repairs complete all as specified and as directed.

PTMT waste coupling of 32 mm dia (half or full threaded) including taking down old coupling of any description complete all as specified and directed [Minimum weight for 32 mm – 45 gms].

PVC corrugated waste pipe 32mm dia, 800mm long complete fixed in repairs all as specified and as directed.

Tubular towel rail 450mm long of PTMT fixed with and including chromium plated brass screws and wooden / plastic cleats(Min Wt 170 gms) etc complete fixed in repairs all as specified and as directed.

Brass chromium plated overhead shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union complete fixed in repairs all as specified and as directed.

Demolition of brick work or stone / PCC /boulder masonry built in cement mortar or lime mortar including all quions, arches, pillars but excluding ashlar facing, dressed stone work of any description all as specified and directed.

Brick work with sub class 'B' bricks built in CM(1:6), straight or curved on plan exc 6 mtr mean radius, using old size bricks complete all as specified and as directed.

Machine cut Cudappa stone slab as in cub board slab/ Kitchen platforms 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including 15mm thick screed bed in CM(1:6), complete all as specified and as directed.

Drapery rods, 25 mm dia, having corrugated PVC extrusion on electric resistance welded MS pipe with fancy type 02 nos knob and 02 nos brackets for each door/windows etc., all as per soffio II of Vista or techno commercially equivalent makes specified in PS complete all as specified and as directed.

Dismantling Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings including ridge, wind tie etc., complete all as specified and directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Rolled mild steel as in roof trusses (framed), trussed purlins crane gantries rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces cleats etc.,steel conforming to Fe 410-W (Gde-E- 250) quality-A all as specifeid and as directed.

Glazed coloured ceramic tiles of size 350 x 250 x 7mm / 450 x 350 x 7mm thick as in vertical surfaces set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick backing coat in CM (1:4) complete all as specified and as directed.

Taking down shutters of any description area exc. 1 sqm but n.exc. 2 sqm each all as specified and as directed.

Hacking out old broken glass of any thickness, size, quality or description from metal / wooden frame works or stone / concrete/ brick surrounds including punching or drilling out old glazing pins/spring clips or fixed with wooden beading etc complete all as specified and as directed.

3.00mm thick figured glass, pin headed type and glazing with oil putty in squares n exc 0.5 sqm in each pane all as specified and as directed.

5.00mm thick figured glass, pin headed type and glazing with oil putty in squares n exc 0.5 sqm in each pane all as specified and as directed.

Precast cement concrete block masonry with solid blocks exc. 10 cm in width and setting in cement mortar 1:6 type C1 1:3:6 ( using 20 mm graded aggregate) complete all as specified and as directed.

10mm thick rendering on brick or concrete surfaces in cement mortar (1:6) and finishing the surface with even and smooth without using extra cement complete all as specified and as directed.

Preparation of old painted wooden surfaces of any description exceeding 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Preparation of old painted steel surfaces of any description exceeding 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Vitreous china wash hand basin, white, flat back of size 550 X 400 mm excluding taps,chain and plug and porcelain stopper but including CI brackets etc., complete fixed in repairs all as specified and as directed.

75 mm bore PVC (SWR) pipes,type 'B' single socketed in any length with rubber ring joints laid in floors including taking down the existing pipe all as specified and as directed.

110 mm bore PVC (SWR) pipes,type 'B' single socketed in any length with rubber ring joints laid in floors including taking down the existing pipe all as specified and as directed.

75mm bore PVC (SWR) bends type 'B' with access door complete all as specified and as directed.

110mm bore PVC (SWR) bends type 'B' with access door complete all as specified and as directed.

PVC (SWR) vent cowl type 'B' 75 mm bore, all as specified and as directed.

75mm bore PVC (SWR) multi floor trap with plain grating including jointing with solvent cement complete all as specified and as directed.

75 mm thick plain cement concrete 1:3:6 type C2 (using 40 mm graded stone aggregate) as in paving/ plinth protection laid in panels including necessary form work, finished rough surfaces of concrete complete all as specified and directed

E/M WORKS

Taking down carefully aluminium / copper wiring / power point wiring (light, fan, socket or power) complete including fittings such as switches, ceiling roses, regulators, sockets light fittings, fans etc and making good the disturbed surface of walls, ceiling etc., including painting with same colour of the back ground complete all as specified and as directed.

Wiring complete with 1.5 sq.mm single core FRLS PVC insulated unsheathed, 1100 volts grade, multi stranded copper conductor cable conforming to IS 694 drawn through and including non-metalic rigid PVC conduit of suitable size, medium grade including necessary accessories surface type run on walls/ ceiling with MS terminal boxes fabricated with 1.6 mm thick MS sheet surface mounted/ concealed on walls with plastic laminated sheet top cover 3 mm thick fixed with cadmium plated iron screws for housing the switches, switch socket outlets, fan regulators etc., incl provision of 1.5 sq.mm PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly, all as specified and as directed for one light point controlled by one switch.

All as per Sl Item No. 2.002 here in before but for one fan point controlled by one switch and regulator.

All as per Sl Item No. 2.002 here in before but for 3 pin socket out let 5 Amps on independent board.

All as per Sl Item No. 2.002 here in before but for 3 pin socket out let 5 Amps on same board.

All as per Sl Item No 2.002 here-in-before but for 16 Amps socket outlet by using 2.5 sq.mm FRLS PVC insulated unsheathed multi stranded copper conductor cable on independent board including provn of 2.5 sq.mm PVC insulated solid copper conductor as contineous earth wire. NOTE FOR SL ITEM NO. 2.002 to 2.006 :- (i) The earth wire for the points in the same circuit can be looped from point to point. (ii) Earth wire shall be taken inside the conduit. (iii) Cost of terminal box is deemed to be included in the item rate quoted for point wiring. (iv) Cost of a circuit of any length of cable from DB to any switch/ socket board to be included in point wiring.

Ceiling rose, surface bakelite type, 65 x 50 mm, 2 to 3 terminals all as specified and as directed.

Switch Piano, flush type, one way, 5 Amps, 240 Volts single pole with ISI marked complete all as specified and as directed.

Switch socket combination 2 in 1, 3 pin and 2 pin, 5 and 15 Amps flush type, universal complete all as specified and as directed.

Switch socket combination 3 & 2 pin, 5 Amps, 240 Volts, flush type multipurpose controlled by one switch all as specified and as directed.

Fan regulator 5 Amps, Stepped, electronic and flush type all as specified and as directed.

Mild steel powder coated down rods of length 1.5 mtr suitable for hanging the ceiling fans below the false ceiling including nuts, bolts, washers and accessories complete all as specified and as directed.

LED tube light fittings along with 18 watts, 4 feet long LED tube with all necessary fixtures suitable for indoor application, wall mounted, extruded aluminium heat shink provision with efficient heat dissipation, integrated electronic driver, powder coated top cover complete with all accessories internally pre wired and including connecting up twin core flexible copper wire complete all as per Bajaj Cat Part No : BCLSB 18 WH or techno commercially equivalent makes specified in PS complete all as specified and as directed.

LED tube light fittings along with 10 watts, 2 feet long LED tube with all necessary fixtures suitable for indoor application, wall mounted, extruded aluminium heat shink provision with efficient heat dissipation, integrated electronic driver, powder coated top cover complete with all accessories internally pre wired and including connecting up twin core flexible copper wire complete all as per Bajaj Cat Part No : BCLSB 10 WH or techno commercially equivalent makes specified in PS complete all as specified and as directed.

Recess mounted slim LED Luminaire of size 2' x 2' with complete diffuser fitting, including 36 Watts 5700 K lamp complete with all accessories all as per Bajaj model No BZRSQL36W XL WH or techno commercially equivalent makes specified in PS complete all as specified and directed.

Angle holder PVC/polycarbonate type all as specified and as directed.

Earthing complete with galvanised steel plate electrode 600mm x 600mm x 6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge not less than 1.5 m below ground level connected to earth lead by GI wire 4 mm dia by means of bolts nuts, check nuts, washers made out of galvanised iron connected to main switch all as shown in elect plate No 3 of MES SSR Part -I includingn excavation and earth work in any type of soil,funnel, 20 mm dia light grade GI watering pipe with chamber of PCC 1:3:6 type C1 40mm thick of size 450mm x450mm (1:2:4) type B1 for cover slab reinforced with 8mm dia TMT bars 10cm c/c both ways and with 6mm MS hook etc., including testing on completion and removal of existing earthing complete all as specified and directed.

MCB DB SPN, 8 ways, 240 volts with 200 Amps rated busbar with double door for housing MCBs all as specified and as directed.

MCB single pole 240 volts 5 to 40 Amps complete all as specified and as directed.

MCB single pole and neutral, 240 volts, 32 to 40 Amps complete all as specified and as directed.

Sub main wiring complete with two runs of 6 sq.mm single core PVC insulated FRLS multistranded copper conductor cable 1100 volts grade, with one run of 4 sq.mm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through non metallic rigid PVC conduit and conduit accessories including taking down the existing all as specified and as directed. NOTE :- Two runs of cable and one run of earth wire shall be measured as one unit for payment purpose.

XLPE insulated, galvanised steel strip or wire armoured and PVC bedded, heavy duty, LT cable 25 sq.mm, 4 core, 1100 volts grade with multi stranded aluminium conductor, including cable glands, cable lugs etc., to suit the cable size, laid in trenches, or fixed along with the poles, bare or through GI pipe, laid under floors / road etc., fixed / concealed in walls / encased in GI pipe etc., jointing and testing complete all as specified and as directed.

Excavation in trenches in hard/dense soil not exc. 1.5 mtr wide and not exc. 1.5 mtr in depth for laying of cables/errection of pole etc., complete all as specified and as directed.

Returning, filling in trenches including spreading leveling watering and well ramming in layers with hard/dense soil not exc. 25 cm thick in each layer complete as specified and as directed.

Removing the excavated material to a distance exc. 50m but n. exc. 100m and depositing where directed at a level n. exc. 1.5m above the starting point complete all as specified and as directed.

Sand cushioning in layers for cables in trenches / ducts for cable including consolidation complete all as specified and directed. NOTE: Punned thickness will be measured for payment purpose.

Bricks, sub class 'B' of old size 230 mm x 115 mm x 75 mm laid in trenches for cable protection all as specified and directed.

Galvanised iron tubing, medium grade, 50mm bore with all accessories for cable protection fixed on poles/buildings or laid in trenches including necessary MS clamps, bolts and nuts etc., including taking down the existing complete all as specified and as directed.

LED building security light fitting 25 Watt with pressure die cast housing, toughened glass and individual LEDs with secondary optics with IP- 66 protection all as per Bajaj cat part No. BRLEP 25W LED WH or techno commercially equivalent makes specified in PS complete all as specified and as directed.

Brackets made out of GI tubing medium grade 25mm bore as required to mount the street light, 90cm long including MS Clamps made out of MS flat iron 25 x 10mm, nuts, bolts, washers etc and applying two coats of alumium paint over a coat of red oxide primer complete all as specified and as directed.

Boring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine including provision of HDPE pipe of 100 mm dia bore suitable for 0.4 Mpa working pressure all as specified and as directed.

Metal clad plug and socket with two pin and earth, single pole MCB with 20 Amps rating, 230 Volts, AC all as per Indo Asian Cat Part No. DHDPUSN020 or techno commercially equivalent makes specified in PS complete all as specifeid and directed.

Dismantling, greasing & painting of ceiling fans complete, in situ and spray painting with one coat of synthetic enamel paint including filling cavities with one filler coat after cleaning all dust etc. and re-fixing with downrod & clamps complete all as specified and as directed.

MCB DB, SPN 6 ways, 240 Volts with 200 Amps rated busbar, double door for housing MCBs all as specified and as directed.

MCB DB, TPN 12 ways, 240 Volts with 200 Amps rated busbar, double door for housing in coming MCCBs and out going MCBs all as specified and as directed.

MCCB 4 pole, 415 Volts, fixed type, 100 Amps with breaking capacity 16 KA all as specified and as directed.

Sub main wiring complete with two runs of 4 sq.mm single core PVC insulated FRLS multistranded copper conductor cable 1100 volts grade, with one run of 4 sq.mm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through non metallic rigid PVC conduit and conduit accessories including taking down the existing all as specified and as directed. NOTE :- Two runs of cable and one run of earth wire shall be measured as one unit for payment purpose.

LED building security light fitting 25 Watt with pressure die cast housing, toughened glass and individual LEDs with secondary optics with IP- 66 protection all as per Bajaj cat part No. BCLST 25W LED or techno commercially equivalent makes specified in PS complete all as specified and as directed.

Brackets made out of GI tubing medium grade 40mm bore as required to mount the street light, 1.50 mtr long including MS Clamps made out of MS flat iron 25 x 10mm, nuts, bolts, washers etc and applying two coats of alumium paint over a coat of red oxide primer complete all as specified and as directed.

SREE VINAYAKA ENTERPRISES

shashi shekar construction

Lakkaiah Rangaswamy