8706 REPAIRS REPLACEMENT OF SEWAGE LINES MANHOLES AND DAY TO DAY COMPLAINTS OF OTM AND MD ACCN UNDER AGE BR III OF GE SOUTH PUNE

Amount

Attending day to day complaints by deploying 02 Nos. of safaiwala for 08 hrs in working days to cleaning of all blockage of any type of sewage line i.e. branch sewer line, main sewer line etc, manholes of any size and depth, in any situation by way of cleaning/ de-sludging by manually or mechanically or by way of any other suitable means including foreign materials as well as rodding (full through) of sewer lines and between the blocked manholes where required and ordered by Engineer-in-charge and keeping the sewage line all time functional cleaning traps, water closet, soil waste / vent pipe, gully traps etc complete up to final drop outlet into septic tanks and soakage well (working in foul condition with taking precautionary measures with necessary equipment as required or applicable complete all as directed by Engr-in-Charge. Note:- (i) The sludge (wet or dry) removed from the manholes and sewage line shall be removed to a distance up to 5 Km or more complete all as directed by Engr-in-Charge. (ii) This item shall contain various complaints regarding blockage of sewage / cleaning which has to be done by 02 Nos. of safaiwala for 08 hrs in each working day. (iii) Complaint shall be completed on same day (handed over till 1600 hrs) (iv) If Safaiwala not attended complaint within time frame mentioned above, 50% per day shall be deducted from quoted rates of this item (v) The contractor shall be responsible for maintain daily job completed by safaiwala deputed by him in the subject work and obtain the signature of I/C complaint cell / Engr-in-charge daily at 1700 hrs on all working days.

Demolition and breaking up drain pipes (SWG, CPVC or RCC pipes), 150mm dia, set in cement mortar, complete all as specified and directed. Notes for item nos. 02 to 05:- Excavation & earth work and demolition of PCC in foundation shall be measured and paid separately

Demolition and breaking up drain pipes (SWG, CPVC or RCC pipes), 200mm dia, set in cement mortar, complete all as specified and directed.

Demolition and breaking up drain pipes (SWG, CPVC or RCC pipes), 250mm dia, set in cement mortar, complete all as specified and directed.

Demolition and breaking up drain pipes (SWG, CPVC or RCC pipes), 300mm dia, set in cement mortar, complete all as specified and directed.

S&F of 150mm dia DWC (Double wall corrugated), class SN8 as in sewage pipes (Black or orange in colour) including with socketed ends with and all fittings & fixtures, water tight joints to prevent leakage, laid over sand cushioning and jointed complete with rubber rings joints etc complete all as specified and directed by Engr-in-Charge. Note:- (a). Sand cushioning shall be measured and paid separately. (b) Laying of sewage line work has to be carried out in running sewage water & temporary diversion /plugged of existing sewage line & bailing of sewage water is the responsibility of contractor and the rate for the same shall be deemed to be included in unit quoted rates.

All as item no. 6.00 but 200mm dia, complete all as specified and directed by Engr-in-Charge

All as item no. 6.00 but 250mm dia, complete all as specified and directed by Engr-in-Charge

All as item no. 6.00 but 300mm dia, complete all as specified and directed by Engr-in-Charge

Excavation in trenches not exc 1.5m wide and n.exc 1.5m in depth for foundations, manholes etc and getting out in in soft / loose soil, complete all as specified and directed.

Excavation in trenches not exc 1.5m wide and exc. 1.5m but n.exc. 3.0m in depth for foundations, manholes etc and getting out in in hard / dense soil, complete all as specified and directed.

Excavation in trenches or in road cuttings not exc 1.5m wide and n.exc 1.5m in depth for foundations, manholes etc and getting out in in soft / dis-integrated soil, complete all as specified and directed.

Excavation in trenches not exc 1.5m wide and exc. 1.5m but n.exc. 3.0m in depth for foundations, manholes etc and getting out in in soft / dis-integrated soil, complete all as specified and directed.

M&L TMT bars, up to 10 mm dia cut to length, bent to shape required including cranking, bending spirally for hooping for column, hooking ends and binding with and incl MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

Labour only for separating, scraping and cleaning of reinforcement (Demolition of concrete measured separately), complete all as specified and directed.

M&L sand filling under in trenches or foundations including watering and consolidation, complete all as specified and directed.

Returning, filling in any type of soil, including spreading, levelling, watering and well ramming in layers n.exc 25cm thick, complete all as specified and directed.

Removing excavated materials (Soil or rocks) n. exc. 50m but n. exc. 250 m and depositing where directed at a level n. exc. 1.50m above the starting point, complete all as specified and directed.

S&F in repairs cast iron, 100mm dia outlet nahani / floor trap, plain with steel grating including jointing with solvent cement, fixed to cement concrete type B1 1:2:4, complete all as specified and directed.

Cleaning of manholes up to a size of 1.50x1.50x1.50m depth by taking out semi solid / solid sludge from manholes completely and dispossed off the same in covered vehicle exceeding 5.0 Km complete all as directed by Engr-in-charge.

Cleaning of manholes up to a size of 1.50x1.50x3.0 m depth by taking out semi solid / solid sludge from manholes completely and dispossed off the same in covered vehicle exceeding 5.0 Km complete all as directed by Engr-in-charge.

M&L for Cleaning and rodding of blocked sewage lines of 150mm dia of sewage line (i.e branch sewage line, main sewage line) by way of cleaning de-sludging foreign material as well as rodding of sewage line between successive manholes manually or pumping out sewage from blocked manhole including de-sludging where required and ordered and keeping sewage line functional entering from floor trap, water closet, soil waste/ vent pipe, gully trap up to final drop / outlet complete all as directed by Engineer-in-charge. Note for item nos. 22 to 26:- The contractor shall bring the high pressure water jetting cum suctioning type machine mounted on LCV/HCV with in 48 Hrs after requirement has been notified by the Engr-in-Charge in the site order book

M&L for Cleaning and rodding of blocked sewage lines of 200mm dia of sewage line (i.e branch sewage line, main sewage line) by way of cleaning de-sludging foreign material as well as rodding of sewage line between successive manholes manually or pumping out sewage from blocked manhole including de-sludging where required and ordered and keeping sewage line functional entering from floor trap, water closet, soil waste/ vent pipe, gully trap up to final drop / outlet complete all as directed by Engineer-in-charge

M&L for Cleaning and rodding of blocked sewage lines of 250mm dia of sewage line (i.e branch sewage line, main sewage line) by way of cleaning de-sludging foreign material as well as rodding of sewage line between successive manholes manually or pumping out sewage from blocked manhole including de-sludging where required and ordered and keeping sewage line functional entering from floor trap, water closet, soil waste/ vent pipe, gully trap up to final drop / outlet complete all as directed by Engineer-in-charge

M&L for Cleaning and rodding of blocked sewage lines of 300mm dia of sewage line (i.e branch sewage line, main sewage line) by way of cleaning de-sludging foreign material as well as rodding of sewage line between successive manholes manually or pumping out sewage from blocked manhole including de-sludging where required and ordered and keeping sewage line functional entering from floor trap, water closet, soil waste/ vent pipe, gully trap up to final drop / outlet complete all as directed by Engineer-in-charge

M&L for Cleaning and rodding of blocked sewage lines of 450mm dia of sewage line (i.e branch sewage line, main sewage line) by way of cleaning de-sludging foreign material as well as rodding of sewage line between successive manholes manually or pumping out sewage from blocked manhole including de-sludging where required and ordered and keeping sewage line functional entering from floor trap, water closet, soil waste/ vent pipe, gully trap up to final drop / outlet complete all as directed by Engineer-in-charge

M&L for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required for the following dia of pipe, complete all as specified and directed:- (a) 150mm bore

(b) 200 mm Bore

(c) 250 mm bore

(d) 300 mm bore

Demolition of cement concrete of any description and in any position not otherwise specifically provided for , complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for , complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation filling / mass concrete, complete all as specified and directed.

S&F in repairs 2mm thick PVC fibre mirror cabinet of size (450x325x120mm ) and fixed to wall after taking down old mirror, complete all as speicified and directed.

S&F in repairs CP Wall mixer 3-in-1 for mixing hot & cold water screwed down for iron pipe and fixed for 15mm bore of pipe complete all as specified and directed.

S & F in repairs Toilet paper holder with flat recessed type stainless steel complete all as specified and directed

S & F in repairs 15 mm chromium plated 2 way bib cock fancy type with wall flange complete all as specified and directed.

S&F in repairs wash hand basin CP brass mixer suitable for mixing of hot & cold water as approved pattern, screwed down for 15mm dia iron pipe, complete all as speicified and directed by Engineer in charge.

S & F in repairs CP health faucet (ABS Body) with 1.0 m long flexible cod complete all aspecified and directed.

S& F in repair 5mm thick sheet glass corner shelf, 250mm radius including CP railing and CP brackets, complete all as specified and directed.

S&F in repairs mild steel chromium plated grating (round) 125 mm dia fixed over floor / nahani trap (with hole OR without hole), complete all as specified and directed.

S&F in repairs CP towel rail 600 mm long 20mm dia fixed with plastic guities with steel screws etc., complete all as specified and directed.

S & F in repairs chromium plated soap dish fixed to plugs with chromium plated brass screws complete all as specified and directed.

Supply and fix in repairs elbow operated pillar tap cast copper alloy, brass chromium plated, screw down, single leaver surgical purpose with extended operating lever of cat ID-FLR-5031N of "Jagur, Cera, Hindware", complete all as specified and directed.

S & F in repair angle cock, fancy type, 15mm bore brass chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repairs towel ring of CP fixed with and including chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.

S&F in repairs vitreous china counter top wash hand basin (excluding taps, waste, pipe chain and plug) but including fixing on granite plateform complete all as speicified and directed. Make - Cera Catmid S2020158 or equivalent Note:- Granite support and top to be measured and paid seperately

S&F in repairs flush pipe of polyethylene of low or high density or PVC 32 mm dia, suitable for low level cistern including jointing to WC complete all as specified and directed.

S&F in repairs 32mm bore, 750mm long PVC waste pipe suitable for WHB complete all as specified and direcetd.

S&F in repairs 40 mm bore and 75 cm long PVC/waste pipe suitable for sink complete all as specified and directed.

S&F in repapir plastic water closet (EWC) seat cover white closed pattern with flat bottom and cover including mild steel chromium plated hinging device complete all as specified and directed.

S&F in repairs viterous china wash down water closet pan (Pedestal pattern) white incl 'P' or 'S' trap and making good the disturbed surface to match with the existing complete all as specified and directed.

S&F in repairs vitreous china ceremic white single piece WC including with S or P trap with UF soft close seat cover, hinges, accessorires set, of size 365x655x765 mm, product Code : LYS-WHT-38851SSM of "Jaquar" or equivalent model in Kohler or Parryware as approved complete all as specified and directed.

S&F in repairs PVC connection pipe 450mm long as suitable with 2 Nos brass check nuts suitable for 15mm bore of pipe with washer, complete all as specified and directed.

S&F in repairs PVC connection pipe 600mm long as suitable with 2 Nos brass check nuts suitable for 15mm bore of pipe with washer, complete all as specified and directed.

S&F in repairs stop cock ISI Marked cost copper alloy, screw down high pressure with crutch or butterfly handle screwed both ends suitable for iron pipe of 15mm bore complete all as specified and directed.

S&F in repairs stop cock ISI Marked cost copper alloy, screw down high pressure with crutch or butterfly handle screwed both ends suitable for iron pipe of 20mm bore complete all as specified and directed.

S&F in repairs stop valves, cast copper alloy, chromium plated, fancy type, concealed, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15mm bore, complete all as specified and directed.

S&F in repairs angle valve cost copper alloy, chromium plated screw down high pressure with crutch handle screwed both ends suitable for iron pipe of 20mm bore, complete all as specified and directed.

S&F in repairs shower rose chromium plated brass fancy type 125x125 mm with or without swivel any size, including fixing to steel pipe or union, complete all as specified and directed.

S&F in repairs PTMT waste fitting 32mm bore suitable for WHB / sink complete all as specified and directed.

S&F in repairs waste coupling, brass chromium plated 32mm dia suitable for WHB, complete all as specified and directed.

S&F in repairs waste fitting (coupling) brass chromium plated 40 mm dia suitable for sink, complete all as specified and directed.

S&F in repairs 10 Itrs capacity PVC (White) valve less syphonic action type, flushing cistern, low level with inlet ball valve float, handle. aluminium brackets for bottom support fixing with gutties embeded in wall with drilling machine etc complete all as specified and directed.

S&F in repairs brass spindle 01 No. or 03 Nos. suitable for 15mm bib cock / stop cock / angle cock / CP piller cock, complete all as directed.

S & F in repairs 05 Nos. and 04 Nos. brass spindle / brass face suitable for 15 mm wall mixer / WHB Mixer /Sink Mixer / CP pillar cock, complete all as directed.

Petty repairs low level flushing cistern of any size / description for repair of leaking water by adjusting/ replacing the washer and adjustment of lever required for making the cistern functional, complete all as directed.

S&F in repairs 20 mm ball brass valve high pressure with polythene float and flynut, screwed down to iron pipe complete all as specified and directed

M&L for cast iron work grade FG 150 of articles exc 5 kg each unmachined, in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors, dampers, stop valve boxes, gate stops, parts of ranges, balusters and similar articles complete all as specified and directed.

S&F in repairs grating doom with waste hole 125 mm dia of PTMT (Minimum weight 40gms) complete all as specified and directed

S&F in repairs vitreous china wash hand basin, white flat back of size 550x400mm including PVC waste coupling 32mm, CP angle cock 15mm bore, and PVC waste pipe, PVC connection 45cm long including CI brackets / fixing with fasteners etc complete all as specified and directed.

S&F in repair basin mixer for hot and cold water without popup waste with 450mm long Braided Hoses complete all as specified and directed. (Make : Jaquar Product code ARI-CHR-39001B or equivalent model in Kohler / Parryware as approved complete all as specified and directed.

S&F in repairs vitreous china, squatting pan, 'Orissa' pattern, size 580 x 440mm white, with integral foot rest, including concrete bedding and PVC flushing cistern 10 Ltr capacity including all internal fitting, inlet, outlet pipe connections and 32mm thick PVC flush pipe for low level cistern etc. complete all as specified and directed.

S&F for Granite 18 to 20mm thick, machine cut (of any type) work (table rubbed and pre-polished) in steps, kambs, pillars, window cills, cooking platforms and like in 10mm thick screed bed cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L for Granite 20mm thick (of any type) work (table rubbed and pre-polished) for wall lining (veneering to wall) including 12mm thick backing coat in cement mortar 1:3, set and pointing with white cement 1:2 using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Rounding edges of stone slab one edge, such as in steps, cooking platform and other similar situation complete all as specified and directed.

M&L for machine cut cuddapa stone slabs one side pre-polished, 20 to 25mm thick, set and jointed in neat cement slurry and pointed in coloured cement to match laid over and including 20mm screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for PCC 1:2:4 type B-1, (using 20mm graded stone aggregate) as in surface channels and drains, bed blocks and benching of manholes including all moulds and forms complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in coping, kerbs, bed blocks etc including weathering, slightly rounded or chamfered angles and throating etc. complete all as specified and directed

S&F high density 40mm bore polythylene pipes (HDPE) of pressure rating 6 kg/cm2 fixed complete to wall or in floors with necessary socket, elbo & bend etc complete fixed to wall or in floors etc complete all as specified and directed

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion in cement concrete and making good disturbed ground. complete all as specified and directed

Dismantling of fencing wiremesh, any type complete all as specified and directed

Supply only chain link MS galvanised fencing any size or type complete all as specified and directed by Engr-in-charge

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed

Supply & Fixing MS work in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets / round bars (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

Dismantling of wrought or MS work of any description etc complete all as specified and directed

Supply & Fixing MS Framed work as in doors or gates or drain covers of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe 410-W (Gde- E- 250) quality-A complete all as specified and as directed.

Material and labour for preparation of new steel surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed

M&L for CORESEAL 357A/CORESEAL 357 CAT and CORESEAL - 135A/CORESEAL 135B for carrying out non destructive water proofing treatment to slab floor and walls of BATH,WC, WHB and floor traps (combind unit) by using construction chermical methods such as, 1) HYDROPHOBIC PU GROUTING 2) EPOXY COATINGS etc. incl. cleaning of surface with wire brush detecting the sources of leakages and making hole and fixing the metallic packer for injecting hydrophobic PU foam and sealer as per manufacturers instruction (Avg 1 metallic packer per Sqm) complete all as specified and directed by Engr-in-Charge. (Make : Build core chemicals or equivalent)

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds mitred / stopped end in manhole, complete all as specified and directed.

Demolition of brick/ stone / block masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed.

M&L for precast cement concrete block masonry exceeding 10cm in width with solid blocks of PCC (1:3:6), type C-2, using 20mm grade stone aggregate and setting in CM 1:6, complete all as specified and as directed

Taking down cement plaster from old brick / stone masonry walls etc. including racking out joints, hacking for keys and scrubbing down with water complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar 1:4 on fair faces brick, stone wall or concrete surfaces, surfaces has to be finished even and smooth mixed with water proofing compound as per manufacturer's instructions complete all as specified and as directed. Note :- Water proofing compound shall be measured & paid separately under respective item.

Supply only liquid water proofing compound, complete all as specified and directed.

Dismantling & breaking of drain pipes of 75mm to 150 mm dia of AC/ PVC / CPVC / CI including fittings, set in cement mortar or adhensive, complete all as specified and directed.

S&F 150 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall or laid under floors / in earth, complete all as specified and directed.

S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall or laid under floors / in earth, complete all as specified and directed.

S&F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall or laid under floors / in earth, complete all as specified and directed.

Re-fixing of old PVC pipes single socketed in any length with rubber ring joints fixed to walls or laid in floors of 110mm dia including fittings and fixtures complete all as specified and directed

Re-fixing of old PVC pipes single socketed in any length with rubber ring joints fixed to walls or laid in floors of 75mm dia including fittings and fixtures complete all as specified and directed

S&F of 110 mm bore PVC (SWR) bends, any radius, complete all as specified and directed.

S&F of 75 mm bore PVC (SWR) bends, any radius, complete all as specified and directed.

S&F of PVC (SWR) bends with oval access door of 110 mm bore, complete all as specified and directed.

S&F of PVC (SWR) bends with oval access door of 75 mm bore, complete all as specified and directed.

S&F of PVC SWR Branch piece single (Single Y) equal or unequal 110mm dia with door access, complete all as specified and directed.

S&F of PVC SWR Branch piece single (Single Y) equal or unequal 75 mm dia with door access, complete all as specified and directed.

S&F PVC (SWR) vent cowl 75mm bore, complete all as specified & directed.

S&F PVC (SWR) vent cowl 110mm bore, complete all as specified & directed.

S&F in repair CI Hubless pipe of dia 150 mm fixed to walls with necessary fittings and clamps complete all as specified and as directed.

S&F in repairs CI hubless dia reducer tee (single branch plain Tee) 150x150x100mm complete all as specified and as directed.

S&F in repairs only SS shielded coupling 150mm bore complete all as specified and as directed.

S&F in repairs CI hubless bend 150 mm bore complete all as specified and as directed.

S&F in repairs CI Hubless pipe of dia 100 mm bore fixed to walls with necessary fittings and clamps complete all as specified and as directed.

S&F in repairs hubless dia reducer tee (single branch plain T) 100x10x100mm complete all as specified and as directed.

S&F in repairs SS shielded coupling 100mm bore complete all as specified and as directed.

S&F in repairs CI hubless bend 100 mm bore complete all as specified and as directed.

S&F in repairs CI hubless 150x100 mm bore Dimminshing pieces (Reducer) complete all as specified and as directed.

M&L for providing precast reinforced cement concrete 1:2:4 type B-1 (Using 20mm garded crushed stone aggregate) as in manhole covers and setting in cement mortar 1:4, complete all as specified & directed.

M&L for precast factory made manhole cover of medium duty, area of each cover exc. 0.35 Sqm but n. exc. 0.90 Sqm and above, 75mm thick with SFRC concreting including groove and hook arrangement for lifting and placing in position and sides covered by MS sheet with necessary collars, complete all as specified and directed by Engr-in-charge.

M & L for preparation of old painted surface and applying one coat of floor paint with ready mixed paint for use on floor complete all as specified & directed by Engineer-in-Charge.

Demolition of stone slab & tiles of any description or thickness in floor, aprons etc., laid, bedded and pointed in any mortar of cement, complete all as specified and directed.

M&L for coloured precast cement concrete interlocking tiles 60mm thick, M-35 grade of any shape and size, conforming to IS-15658-2006 glossy finish as in floor / pavement laid over and including 50mm thick stone dust cushioning, laid dry complete all as specified and directed by Engr-in-Charge

S&F in repairs pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for 15mm bore GI pipe, complete all as specified and directed.

S&F in repairs 15mm bore GI pipe "medium grade" including with all fittings & fixtures, fixed to walls / ceiling or laid in floors in any position or location including taking down of old unserviceable pipe complete all as specifed and directed.

S&F in repairs 20mm bore GI pipe "medium grade" including with all fittings & fixtures, fixed to walls / ceiling or laid in floors in any position or location including taking down of old unserviceable pipe complete all as specifed and directed.

M&L for cutting chases, pinning in, concrete block / brick / stone walling & making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc. and cutting chases for concealed water tubing and making good, cutting exc. 10 cm girth, complete all as specified and directed.

S & F in repairs of 15 mm bore bib taps, chromium plated, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed.

M&L for non skid coloured ceramic tiles 400x400x 7 to 8mm thick size joint free of approved colour, set jointed in cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 20mm thick screed bed in CM 1:4 etc complete as in flooring all as specified and directed.

M&L for coloured glazed ceramic designed tiles in vertical surface 600x 300x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick backing coat in CM 1:4 to maintaine true plumb including triangular filleting on top edges in CM 1:4 including dismantling wall tiling including taking down backing coat, removing rubbish off up to a distance exceeding 5 Km complete all as speicified and directed.

M&L for Vitrified chequerred cement concrete glazed tiles of size 30cmx30cmx10 to 12mm thick in floor, set, jointed in cement slurry and pointed in grey cement and pigment over and incluidng 20mm thick screed bed in CM 1:6 including dismantling of old existing tiles including screed bed and removing rubbish off up to a distance exceeding 5 Km complete all as speicified and directed.

M&L for PCC 1:3:6 type C-1, (using 20mm graded stone aggregate) of 75mm thick, laid in alternate bays as in path and plinth protection / hard standing flooring etc., finish the surfaces even and smooth with using extra cement, complete all as specified and directed

M&L for precast coloured chequered cement concrete tiles, glossy finish of size 300x300x25 mm thick, conforming to IS-1237 (2006), set jointed and pointed with grey cement and pigment as in floor laid over and including 20 mm thick screed bed in cement mortar 1:4 including demolition of existing floor tiles including bedding layer complete all as specified and directed

Raj Construction Company (BID ID -3411666)

SARATH ENTERPRISES (BID ID -3408965)

M/s Omkar Associates (BID ID -3406128)

shiva traders (BID ID -3407204)

Gauri Associates (BID ID -3410838)

Santosh Pandurang Pise (BID ID -3409598)

M/s.BAJRANG CONSTRUCTION (BID ID -3408631)