REPAIR/REPLACEMENT OF SUMMER/WINTER APPLIANCES AND OLD/UNSV WIRING ALONGWITH FITTING AND FIXTURE AT MD AND OTM ACCN AT BANA SINGH ENCLAVE, YOGENDER VIHAR, 18 MADRAS, 5/11 GR, 180 MAHIPALPUR, 35 INF BDE, 227 FD WKS UNDER AGE E/M OF GE (SOUTH) DELHI CA

Amount

M&L for Attending day to day complaints for checking the existing defective Ceiling Fan/ Exhaust Fan & Geyser including taking down of ceiling fan/ exhaust fan/geyser for rewinding/major defects and carrying out minor repair as required to make the item functional by checking the fault like capacitor, Holder hook, hanging nut & bolts, connection of wire, heating element, rubber gasket, fastner bolt etc at site complete all as specified and as directed.

Notes:- 1) The rate quoted by the tenderer are inclusive for replacement of small article like PVC wire for connection upto 1.00 Mtr length, greasing, oiling, isulation tap, screw/botls etc. to make the fan/geyser to fully functional and hanging it on its original poosition. 2) One ceiling fan/exhaust fan/geyser shall be measured as one unit.3) The site for attending complaints are Bana Singh Enclave, Yogender Vihar, 18 Madras, 5/11 GR,180 Mahipalpur, 35 INF BDE, 227 FD Wks. Contractor shall provide adequate tradesmen (electrician) to attend the complaints all the above areas in all working days between 0830Hrs to 1700Hrs including holiday and sunday if electrician will not come a recovery of Rs 1000/- per day shall be recovered from the contractor due. 4) Contractor shall ensure the security passes for his staff, to be obtained from concern authority for attending complaints.

5) The contractor will ensure that the team of electricians with necessary tools bag shall always remain present at complaint cell to attend the complaints. 6) A recovery of Rs.100/- for not attending the complaint upto 04 hours and after 04 hours Rs.500/- shall be recovered from the contractor due. 7) All the complaint slip, register & other connected document will be provided by the contractor without any extra cost. 8) Proper record (date wise) of complaints received & rectified by the contractor and the same may be asked for verification at the time of payment of each RAR/Bill. 9) The unserviceable defective parts as catered here-in-after shall be measured and paid seperatebly as S&F in repairs/M&L in repairs.

S&F in repairs BLDC ceiling fans Motor complete with blades, down rods, electronic regulator and accessories, 230 V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor complete all as specified and as directed.

S&F in repairs Regulator suitable for onground Ceiling Fan 230V, 50Hz complete all as specified and as directed. Note :- Make Should Be suitable for all type of Ceiling fan.

S&F in repairs Electric BLDC fan controller PCB with short cuircuit protection power 440V suitable for onground BLDC ceiling fan 1200mm Sweep complete all as specified and as directed.

S&F in repairs Exhaust fan motor Light duty Metal 300 mm Sweep (1400 RPM) complete with blades and accessories 230 V complete all as specified and as directed.

S&F in repairs CP connection with brass nipple 15 mm x 600 mm for Hot & Cold water with brass nuts and washers stainless steel at both ends of length not exc. 60 cms for connection of stainless steel as per sample complete all as specified and as directed.

S&F in repairs thermostat 9/11" (ISI Marked) for 25/35/50 Litres capacity Geyser as per sample complete all as specified and as directed.

S&F in repairs heating element of 1.5 KW including rubber washers (ISI marked) etc as per site requirement complete all as specified and as directed.

S&F in repairs heating element of 2.0 KW including rubber washers (ISI marked) etc as per site requirement complete all as specified and as directed.

S&F in repairs 35/50 Ltr inner stainless tank suitable for 35/50 Ltr storage water heater as per sample complete all as specified and as directed.

S&F in repairs 25 Ltr inner stainless tank suitable for 25 Ltr storage water heater as per sample complete all as specified and as directed.

S&F in repairs insulating material (Glass wool) for 25/35/50 litre capacity Geysers as per sample complete all as specified and as directed.

S&F in repairs base plate geyser syphon assembly set complete with inlet, outlet and thermostat, complete including rubber gasket as per sample for geyser of 25 litres cap as per sample complete all as specified and as directed.

S&F in repairs base plate geyser syphon assembly set complete with inlet, outlet and thermostat, complete including rubber gasket as per sample for geyser of 35/50 litres cap as per sample complete all as specified and as directed.

S&F in repairs FR PVC sheathed Round, Copper conductor (Flexible) industrial cable, 1100 Volts, conforming to IS: 694 of size 2.5 Sqmm 3 core for connecting geyser, complete including taking down old unserviceable cable complete all as specified and as directed. Note:- The PVC copper wire more than 1.00 Mtr in length shall be measurement and paid under this iem.

S&F in repairs safety plug and nut for high pressure release As per sample complete all as specified and as directed.

S&F in repairs non-return valves 15mm dia made up of brass as per sample complete all as specified and as directed.

S&F in repairs MS top & bottom cover for geysers of 25/35/50 ltrs capacity any make as per sample duly painted with two coats of Synthetic enamel spray paint (first quality) as per existing complete all as specified and as directed.

S&F in repairs MS outer cover for geyser made out of MS sheet suitable for upto 50 ltrs capacity geyser vertical/horizontal type complete all as specified and as directed.

S&F in repairs MS fastner bolt 8 mm dia and upto 150mm long for fixing Geyser/Exhaust Fan with nuts and washers complete all as specified and as directed.

S&F in repairs indicating lamp round / flat type (Red & Green) 230 volts suitable for Geyser as per sample complete all as specified and as directed.

S&F in repairs "U" clamp with rubber real for hanging ceiling fans of 1200/1400mm sweep as per sample complete all as specified and as directed.

S&F in repairs Down rod of 1.5 feet height fabricated out of MS pipe 12mm dia heavy duty, duly painted with one coat of white synthetic enamel paint complete all as specified and as directed.

S&F in repairs Canopy of Ceiling fans of 1200/1400mm swipe heavy duty complete all as specified and as directed.

S&F in repairs blade (set of 3 blades) of Ceiling fans 1200/1400mm swipe heavy duty as per sample complete all as specified and as directed.

S&F in repairs blade of exhaust/fresh air fans of 230/300 mm swipe heavy duty as per sample complete all as specified and as directed.

S&F in repairs blade of exhaust/fresh air fans of 450 mm swipe heavy duty duly as per sample complete all as specified and as directed.

S&F in repairs Exhaust fan MS Louvers upto 450 mm Size, as per sample up to fourth floor complete all as specified and as directed. Note:-Staircase arrangement for fixing of louvers up to fourth floor shall be arranged by the contractor without any extra cost.

S&F in repairs single phase inducation motor AC 230V, 1350 RPM copper wounded suitable for fresh air fan 300mm sweep as per sample complete all as specified and as directed.

S&F in repairs single phase inducation motor AC 230V, 1500 RPM copper wounded suitable for fresh air fan 450mm sweep as per sample complete all as specified and as directed.

S&F in repairs single phase inducation motor AC 230V, 1400 RPM copper wounded suitable for wall mount fan upto 450 mm sweep as per sample complete all as specified and as directed.

S&F in repairs Switch Modular type switch, 6 Amp 1- way SP switch complete all as specified and as directed.

S&F in repairs modular type 2/3 pin combined shuttered type 6 Amp socket complete all as specified and as directed.

S&F in repairs Switch Modular type switch, 16 Aamp 1-way SP switch complete all as specified and as directed.

S&F in repairs modular type 2/3 pin combined shuttered type 16 Amp socket complete all as specified and as directed.

S&F in repairs ceiling fan capacitor of 2.5 mfd complete all as specified and as directed. Make : TIBCON/AE/ EPCOS/Havells

S&F in repairs ceiling fan capacitor of 3.5 mfd complete all as specified and as directed. Make : TIBCON/AE/ EPCOS/Havells

Taking down carefully the old U/S Aluminium point wiring (light, fan, socket or power) complete fitting such as switches, ceiling roses, pendants, sockets, regulators, etc and making good disturbed surfaces of walls including necessary touch up with the adjoining surface of disturbed area ie with OBD/colour wash/white wash as the existing finish complete all as specified and as directed.

M&L for point wiring complete, standard copper conductor 1.5 Sqmm nominal area PVC insulated FRLS 1100 volts grade electrical cable in and including suitable concealed/existing PVC conduit medium grade and sunk in pressed steel terminal boxes of required size with top cover 3 mm thick plastic/laminated sheet of required color with screwed and cup washer complete with all accessories including 1.5 Sqmm standard copper conductor PVC unsheathed cable earth and connected to earth dolly complete all as specified and as directed. Note :- The Rate is inclusive cutting/chasing and making good distrubed surface with CM 1:3 and same surface finishes with the adjoining surface of distribed area with ODB/colour wash/white wash complete.

All as per item No.39 here-in-before, but One light /fan/Bell point/security light controlled by one way switch

All as per item No 39 here-in-before, but One 3 pin socket outlet 5 amps on same board

All as per item No.39 here-in-before, but One 3 pin socket outlet 5 amps point independent board with cable 1.5 Sqmm for main current and 1.5 sqmm as earth wire as power point.

All as per item No.39 here-in-before, but One 3 pin socket outlet, 15 amps on independent board with cable 2.5 Sqmm for main current and 2.5 sqmm as earth wire as power point.

All as per item No.39 here-in-before, but One 3 pin socket outlet, 15 amps on independent board with cable4 Sqmm for main current and 4 sqmm as earth wire as AC point.

S&F switch piano, flush type 5 Amps single pole one way complete all as specified and as directed.

S&F socket piano, flush type 5 Amps single pole one way complete all as specified and as directed.

S&F switch piano, flush type 15 Amps single pole one way complete all as specified and as directed.

S&F socket piano, flush type 15 Amps single pole one way complete all as specified and as directed.

S&F AC box with MCB 20 Amp complete with metal box and 3 Pin top plug complete all as specified and as directed. Note : Rates are inclusive of cutting/chases for mounting metal box on wall and manking good to disturbed surfaces with OBD/Colour wash/white wash and wall putty where ever required.

S&F of electric bell ding dong AC, 230 volts single phase complete all as specified and as directed.

S&F bell push, flush type 5/6 Amps complete all as specified and as directed.

S&F in repairs Wall mounted LED Integrated Batten T5 20 Watt - 4Ft White, indoor decorative PVC extruded T5 LED battern-Integrated complete all as specified and as directed.

S&F in repairs Wall mounted LED Integrated Batten T5 10 Watt-2 Ft White, indoor decorative PVC extruded T5 LED battern-integrated type complete all as specified and as directed.

Supply only battan of holder PVC insulated body complete all as specified and as directed.

S&F in repairs LED lamp 12 Watt LED Bulb complete all as specified and as directed.

S&F ceiling rose surface Bakelite 60x 25 mm two to three terminals complete all as specified and as directed.

S&F in repairs wall mounting 12 Watt LED decorative wall light fixture made up of Polycarbonate, with suitable with all connection complete all as specified and as directed.

S&F in repairs 10W LED bulk head in engineering plastic housing with clear prismatic diffuser, 10W WHITE including all accessories connecting up twin core flexible copper conductor cable complete all as specified and as directed.

S&F in repairs MCB SPN 40/63 Amps 240 volts complete all as specified and as directed.

S&F in repairs MCB SP 6 to 32 Amps 240 volts complete all as specified and as directed.

Taking down and re-fixing electronic/pre-paid meter in meter box with consultation with pre-paid meter authorities including necessary connections of incoming and out going cables for light and power complete all as specified and as directed.

Taking down unserviceable sub main wiring twin core any size complete and making good the disturbed surface complete all as specified and as directed.

M&L for submain wiring of two runs of 6 Sqmm size for main cable and one run of 6 Sqmm size earth continuity conductor of single core PVC insulated but unsheathed FRLS cable of specified size multistranded copper conductor 1100 volts grade IS-694 marked , drawn PVC conceiled conduit of size 25mm dia with complete all as specified and as directed.

Notes for Srl No.58:- (i) Phase should be Red/Yellow/Blue, neutral should be black and earthing wire should be of green colour. Two runs of cable for 3 phase neutral and for earth will be measured and paid as one unit length. (ii) The rates are inclusive of Cutting/chasing and making good to disturbed surface with CM 1:3 and same surface finishes with the adjoining surface of disturbed area with OBD/Colour wash /white wash complete.

S&F in repairs upper and lower Gun metal bush for ceiling fans as per sample complete all as specified and as directed.

S&F in repairs wall mount bush upto 400mm sweep of suitable size & model as per sample complete all as specified and as directed.

S&F in repairs wall mount shaft upto 400mm sweep with pin of suitable size & model as per sample complete all as specified and as directed.

S&F in repairs ceiling fan Ball bearing of suitable size & model as per sample complete all as specified and as directed.

S&F in repairs fan shaft with pin for ceiling fans of 1200/1400mm sweep as per sample complete all as specified and as directed.

S&F in repairs GI pipe's bracket suitable for fixing of bldg security LED light fitting of 45 Watts including grouting and fixing the same on wall for installation of light fitting with necessary clamps, nut, bolts & washer and painting by synthetic enameled good quality paint in white/grey colour over one coat of red oxide primer until unless smoothness of bracket complete all as specified and as directed. Note :- GI pipe should be 25 mm bore with medium grade and the same to be moulded in 45 degree angle at the 1 Mtr height to fix the building security light fitting.

Note :- The contract sum shall be after deducting the amount of credit shown in Sch of Credit of this tender