Providing fitting of new gate structure along with winch machine in place of damaged escape gate at Garore on distributary of Ranbir Canal

Amount

Dismantling of damaged winch machine of 05 ton capacity from the supporting channel and disconnecting the stem rod from the leaf structure then extracting out the damaged/worn out gate leaf structure with the help of manual labour using tools and tackles, chain pulley block and tripod/hydra crane after removing accumulated mud/silt around the gate leaf. Carriage of gate structure along with winch machine and stem rod to the road side after crossing the canal with the help of manual labour using tools and tackles. Loading in mechanical transport and then carriage to workshop. Fabrication of leaf structure of size 1.5X2.25Mtrs (approx) using the ISMC channel of 75X40MM size with 3 No. vertical & 2 No. horizontal cross members for support by way of cutting /welding using superior quality electrodes. Providing and then welding the MS sheet of 5/6mm thickness on the frame of channel structure. Also making of provision for stem rod attachment with 2 no. L-shaped MS Clamps. Providing and fitting of 1 no. stem rod made out of 50 mm dia. MS bar of length approx. 6’and then cutting of thread & turning, finishing to the original size. Providing/fixing of bulb type and flat rubber seal of size as per required match of leaf frame by providing & fitting of MS drilled MS flat for securing the seal duly riveted/bolted. Fabrication, providing & fitting of 05 Ton capacity manually operated, worm gear type winch machine along with base plate of 10mm thickness of 35X35cms size approx, oiling and greasing the gear mechanism before fitting. Complete painting of gate structure by way of Providing two coats of superior quality enamel paint after applying two coats of red oxide primer. Loading the gate structure along with winch machine on the mechanical transport for carrying to site of installation. Unloading the gate structure at road side then shifting to the site after crossing the canal by making temporary approach with the help of manual labour using tools and tackles/crane and earth moving machinery as per requirement. Installation of gate structure by way of lowering the leaf structure into the sliding grooves using manual labour, tools and tackles using chain pulley block and tripod/crane by drilling requisite no. of holes in hoisting channels at site. Fitting of winch machine on the supporting channel and connecting the stem rod to the leaf structure after ensuring the proper alignment/gravity of the gate structure. Complete job includes cost of material, transportation charge, labour charges and testing for its smooth operation at site

Rebate on Old Parts

G S ENGINEERING WORKS

M/S FASTTRACK ENGINEERS