SEES/SHIMLA-291/2021-22

Amount

Excavation in foundation, trench etc. In earth work, lift up to 1.5 meters. work, in all kinds of soil, Stacking and excavation soil more not than 3 meters clear from the edges of the excavation and then returning the stacked soil in 15 CM. Layers, when required in to plinths sides of foundations etc. consolidating each deposited of all surplus excavated earth at approval dumping site within all leads and lifts as directed by the Engineer-in-Charge. in all kinds of soil .

Boulder filling dry hand packed tightly as in wire crtates

Providing and laying cement concrete 1:3:6 ( 1 cement: 3 sand :6 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of form work in foundation and plinth

Providing Mild/Tor steel reinforcement for RCC work i/c bending, binding and placing in position including all lead and lift of material. Tor Steel

Steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of red lead paint.

a) In beams, josists, channels, angles, tee, flats with connecting plates or angle cleats as in main and cross beams, hip and jack rafters, purlins connected to common rafters and the like.

b) In gratings framed guard bars, ladders, railing, brackets and similar works. (i) Through Rate

Providing form work with steel plates 3.15mm.thick welded with angle iron in frame 30x30x5mm. so as to give a fair finish including centering, shuttering, strutting and propping etc. with wooden battening and soiling height of propping and centering below supporting floor to ceiling not exceeding 4 mtrs. and removal of the same for in situ-reinforced concrete and plain concrete work including all leads and lifts of materials in (Sub analysis of rates for manufacturing steel plates) Foundation, footings base of columns etc and mass concrete.

a) Foundation, footing basis of columns etc. and mass concrete.

Providing and laying cement concrete 1:1.5:3 (1cement :1.5 sand :3 graded stone aggregate 20mm. nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in foundation and plinth a) Foundation, footings bases of columns and the like mass concrete

Painting two coats (excluding priming coat) on new steel and other metal surface under coat with ready mixed paint brushing to give an even shade including cleaning the surface all dirt, dust and other foreign matter : With ready mixed paint other than white.

Providing and fixing Galvanised M.S. Round holding down and anchor bolts with nuts and washer plate complete.

Providing and laying P.V.C. pipe for weep holes 100 mm dia.

Providing and laying precast RCC slab cover 65 mm thick 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20 mm nominal size) for outdoor cable trenches with outerframe of M.S. Angle 50x50x5 mm welded with reinforced steel bar as per design i/c making grooves for lifting arrangement complete with placing the cover on cable trench in proper position in all respect as per the direction of Engineer-in-charge i/c removal of old/damaged cable trench covers within a lead of 20 mtrs. beyond yard area.

Providing and laying cement concrete 1:4:8 ( 1 cement: 4 sand :8 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of form work in foundation and plinth

Providing and laying shingle/ aggregate (Gravel) 40 mm/20mm in yard area in three layers 50 mm thickness each as per Direction of Engineer-In-Charge.

SACHIN GARG

kaushal Electricals