Loading
Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹7.8 Craccepted-aoc | ₹7.8 Cr | accepted-aoc |
Tender Value
₹7.5 Cr
EMD Value
₹11.2 L
Closing Date
12 May 2026, 9:30 pmClosed
Karnataka State Road Transport Corporation
RANGARAJU B P
K HOSUR, TARIKERE
KSRTC/2026-27/BD/WORK_INDENT173
KSRTC/2026-27/BD/WORK_INDENT173
Open
Buildings
Two Tender Document System(Two Cover)
KSRTC Divisional Controller Office Hassan
6 documents required · 6 mandatory
Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)
Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)
Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)
Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
List of Financial Resources with Certificates
To Qualify for award of this contract the tenderer, as a prime contractor, should have in his name Satisfactorily completed at least one Similar nature of work such as CC Road work/RCC Framed structure building work costing costing not less than Rs.374.57 Lakhs. The work should have been commenced and completed in any year during the last five financial years (i.e from 01-04-2021 till date of submission) i.e the work must have commenced on or after 01-04-2021 and completed till the date of submission of tender. Note: The work done certificate shall clearly mention the date of commencement & date of completion, otherwise it will not be considered for evaluation
To Qualify for award of this contract the Tenderer Executed in any one Financial year during the last 5 years (i.e, during the years years 2021-22 , 2022-23, 2023-24,2024-25&2025-26 the following minimum quantities of work in any of the Government Sector Undertaking. To Qualify for award of this contract the Tenderer, as a prime contractor, should have in his name Executed in any one financial year during last five years i.e. years 2021-22 , 2022-23, 2023-24,2024-25&2025-26 the quantities of works mentioned below1. M25 and above grade RCC - 755.00 cum 2. TMT/Mild Reinforcement Steel - 131 Tonne3. M30 & above for pavement concrete - 1040.00 cum4.Wet mix macadem/Dry lean concrete/GSB - 1510.00 Cum5.Bricks/solid blocks -446.00cum 6 M.S.Angular/Tubular Truss - 32 Tonne7. Embankment -4921 Cum 8.Electrical works -44.00lakhs incase solid blocks work sqm qty will be converted to cum
To Qualify for award of this contract the tenderer must have valid Class I Contractors Registration Certificate, registered in KPWD /MES /CPWD as on the Date of Tender Notification
To Qualify for award of this contract the tenderer in his name should have, in the last five financial years ( i.e. during the years 2021-22 , 2022-23, 2023-24,2024-25&2025-26) achieved in at least two financial years a minimum average financial turnover of Rs 1498.298 Lakhs (in all classes of civil engineering construction works only )
To Qualify for award of this contract the assessed available tender capacity of the tenderer should be more than the amount put to tender. Note: The bid capacity of the tenderer is calculated based on the formula.Assessed Available Tender Capacity -( (Ax N x 1.5) - B) WhereA -Maximum value of Civil Engineering works, (updated to the financial year of Tender invited), executed in any one year during the last five years.(Completed as well as works in progress).B- Value at price level (updated to the financial year of tender invited) of existing commitments and ongoing works to be completed during the next two years.N- Number of years prescribed for completion of the work for which tender is invited.1.5 -Multiplying factor for assessing the available tender capacity for works costing above Rs.100.00Lakhs
Equipments Required during Execution of Works as per ELIGIBILITY CRITERIA in the tender document
Liquid assets and or availability of credit facilities of not less than Rs. 224.74 Lakhs (credit lines /letters of credit /certificates from Banks) for meeting the fund requirement etc. (usually 30% of the amount of contract in the prescribed format )
₹5,000
₹11.2 L
12 May 2026
12 Apr 2026
14 May 2026
8 May 2026
5 May 2026
CONSTRUCTION OF KSRTC NEW BUS DEPOT AT TARIKERE
Earth work excavation by mechanical means for drains, canals, waste weir, draft, aapproach channels, key trenches, foundation of Buildings and bridges and such simillar works in all kinds of soils, as...
Providing and filling in foundation with granite/ trap broken metal 100mm. And down size and with approved sand including had packing, ramming, watering, including cost of all meterials and labour wit...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...
Providing and laying in Cement Concrete for all Basement and surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine ag...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite/t...
Providing and laying in Reinforced cement concrete for all Basement and surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates ...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. Th...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. Th...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. Th...
KSRB 42.12 Extra for providing throating or drip moulding to R.C.C chajja with plastering labour charges only as per specifications. Specification No KBS
Providing ThermoMechanically Treated bars of grade Fe550D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent ...
Providing Size Stone masonry with hard stone in foundation and plinth with Cement mortar 1:6 1 cement : 6 coarse sand
Filling available excavated earth excluding rock in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ramm...
Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:4 1 cement : 4 coarse sand inclu...
Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:3 1 cement :3 coarse sand inclu...
Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves excluding cost of cement concrete and side...
Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...
Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo...
Providing and fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners and jointed 2 No.s of 150mm long bra...
Providing and fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top and bottom rails, covered with heat moulde...
Providing and fixing of 3track x 2panel sliding windows made out of multi chambered UPVCMatching to RAL9016 sections and with minimum TiO2Titanium Dioxide at 6PHR with TPEThermo Plastic Elastomer and...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...
Providing 12 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:3 1 cement: 3 fine sand to concrete surface including rounding off corn...
Providing 15 mm cement plaster on the solid block surface of mix 1:4 1 cement: 4 fine sand including rounding off corners wherever required smooth rendering, providing and removing scaffolding, inclu...
Providing 12 mm cement plaster with cement mortar 1:4 1 cement:4 fine sand including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of mate...
Providing groove cutting in plastering, 15mm width and to the required depth as per design and finishing in CM 1:3 including curing
Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth co...
Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...
Providing and fixing precoated galvanised iron profile sheets size, shape and pitch of corrugation as approved by Engineerincharge 0.50 mm + 0.05 percentage total coated thickness with zinc coating 1...
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm +0.05 percentage total coated thickness, Zinc coating 120 grams per m2 as per IS: 277, in 240 mpa steel grade, 57 mic...
Providing, laying, spreading and compacting graded stoneaggregate to wet mix macadam specification includingpremixing the Material with water at OMC in mechanical mixplant carriage of mixed Material b...
Construction of dry lean cement concrete Sub base over a prepared subgrade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement rati...
Construction of unreinforced plain cement concrete pavement using RMC M30 grade with OPC at 270 kg/m3 and GGBSat 90 kg/m3 75:25 proportion as per approved mix design procedure and thickness as per de...
Vaccum dewatering with vaccum pump and suction mat and compaction with skin floater clubbed with floating disc including cost of generator, HOM of Machinery, screed vibratory, power floater, blade and...
Supplying, fitting and placing uncoated Mild steel reinforcement complete in foundation as per drawing and technical specification
Providing and filling joint sealing compound as per drawings and technical specifications with coarse sand and 6 per cent bitumen by weight
Providing and fixing in position 20 mm thick premoulded joint filler in expansion joint for fixed ends of simply supported spans not exceeding 10 m to cater for a horizontal movement upto 20 mm, cover...
Providing and laying vitrified floor tiles in different sizes thickness to be specified by the manufacturer with water absorption less than 0.08 percentage and conforming to IS: 15622, of approved mak...
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...
Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineerincharge.
Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with...
providing and laying Ceramic glazed floor tiles of size 300x300 mm thick ness to be specified by the manufacturer, of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, ex...
Providing flooring with 25mm thick polished Cuddapah slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mi...
Providing and fixing white vitreous china pedestal type water closet European type with seat and lid, 10 litre low level white vitreous china flushing cistern and C.P. flush bend with fittings and C.I...
Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the wa...
Providing and fixing mirror of superior glass of approved quality and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Circular sh...
Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre and post flushing with water 250 ml and 500 ml consumption, having...
Providing and fixing 100 mm sand cast Iron grating for gully trap.
roviding PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints...
roviding PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints...
roviding PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Constructing brick masonry chamber of internal dimension 450x600mmand depth of 600mm inner dimensions with modular bricks of CD 75in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering1...
Providing and fixing 455x610 mm cast iron cover with frame weight to be not less 38kgs weight of cover 23 kgs and weight of frame 15 kgsand necessary locking arrangements with M.S flats 32x6 mm etc an...
Providing and fixing stainless steel Grade 304 railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature wherever required and fitting ...
Finishing walls with 100 percentage Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali and fungal resistance, dirt resistance exterior paint...
Finishing walls with Acrylic Smooth exterior paint of required shade :New work Two coat applied at 1.67 ltr/10 m² over and including priming coat of exterior primer applied at 2.20 kg/10 m² with pai...
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drop...
Providing and fixing of Aluminium composite panel of approved make and colour for wall cladding for Brick/Rcc/stone walls and coloumns/ beams with necessary aluminium frame works at required level mad...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite/t...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. Th...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. Th...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. Th...
Providing ThermoMechanically Treated bars of grade Fe550D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent ...
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:4 1 cement : 4 coarse sand inclu...
Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:3 1 cement :3 coarse sand inclu...
Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves excluding cost of cement concrete and side...
Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...
Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo...
Providing and fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners and jointed 2 No.s of 150mm long bra...
Providing and fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top and bottom rails, covered with heat moulde...
Providing and fixing of 3track x 2panel sliding windows made out of multi chambered UPVCMatching to RAL9016 sections and with minimum TiO2Titanium Dioxide at 6PHR with TPEThermo Plastic Elastomer and...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...
Providing 12 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:3 1 cement: 3 fine sand to concrete surface including rounding off corn...
Providing 15 mm cement plaster on the solid block surface of mix 1:4 1 cement: 4 fine sand including rounding off corners wherever required smooth rendering, providing and removing scaffolding, inclu...
Providing 12 mm cement plaster with cement mortar 1:4 1 cement:4 fine sand including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of mate...
Providing groove cutting in plastering, 15mm width and to the required depth as per design and finishing in CM 1:3 including curing FF
Providing and laying vitrified floor tiles in different sizes thickness to be specified by the manufacturer with water absorption less than 0.08 percentage and conforming to IS: 15622, of approved mak...
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...
Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineerincharge. FF
Providing and laying Ceramic glazed floor tiles of size 300x300 mm thick ness to be specified by the manufacturer, of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, ex...
Providing and fixing white vitreous china pedestal type water closet European type with seat and lid, 10 litre low level white vitreous china flushing cistern and C.P. flush bend with fittings and C.I...
Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the wa...
Providing and fixing mirror of superior glass of approved quality and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Circular sh...
Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre and post flushing with water 250 ml and 500 ml consumption, having...
Providing and fixing 100 mm sand cast Iron grating for gully trap. FF
roviding PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints...
roviding PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints...
roviding PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints...
Providing and fixing double glazed hermetically sealed glazing in alu minium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including provid...
Providing and fixing of Aluminium composite panel of approved make and colour for wall cladding for Brick/Rcc/stone walls and coloumns/ beams with necessary aluminium frame works at required level mad...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and fixing stainless steel Grade 304 railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature wherever required and fitting ...
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appro...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Finishing walls with 100 percentage Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali and fungal resistance, dirt resistance exterior paint...
Finishing walls with Acrylic Smooth exterior paint of required shade :New work Two coat applied at 1.67 ltr/10 m² over and including priming coat of exterior primer applied at 2.20 kg/10 m² with pai...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite/t...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. Th...
Providing ThermoMechanically Treated bars of grade Fe550D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent ...
Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...
Providing and fixing precoated galvanised iron profile sheets size, shape and pitch of corrugation as approved by Engineerincharge 0.50 mm + 0.05 percentage total coated thickness with zinc coating 1...
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm +0.05 percentage total coated thickness, Zinc coating 120 grams per m2 as per IS: 277, in 240 mpa steel grade, 57 mic...
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:4 1 cement : 4 coarse sand inclu...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing 15 mm cement plaster on the solid block surface of mix 1:4 1 cement: 4 fine sand including rounding off corners wherever required smooth rendering, providing and removing scaffolding, inclu...
Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix 1:3 1 cement: 3 fine sand including rounding off corners wherever required...
Finishing walls with Acrylic Smooth exterior paint of required shade :New work Two coat applied at 1.67 ltr/10 m² over and including priming coat of exterior primer applied at 2.20 kg/10 m² with pai...
Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...
Providing and fixing water closet squatting pan Indian type W.C. pan with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually cont...
Providing and Applying PU based Elastomeric Liquid Applied PU Waterproofing Membrane single component, cold applied, water based acrylic PU dispersion with highly elastic and UV resistant water proofi...
roviding PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints...
Providing and fixing chorinated poly vinyl choride CPVC pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fitting fitting ...
Providing and fixing chorinated poly vinyl choride CPVC pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fitting fitting ...
Providing and fixing chorinated poly vinyl choride CPVC pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fitting fitting ...
Providing and fixing chorinated poly vinyl choride CPVC pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fitting fitting ...
Providing and fixing brass stop cock of approved quality :15 mm nominal bore FF
600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g FF
Providing and fixing Brass full way valve gate with C.I. wheel of approved quality screwed end : 25mm FF
WATER PROOFING Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix 1:3 1 cement: 3 fine sand including rounding off corners wh...
Earth work excavation by mechanical means for drains, canals, waste weir, draft, aapproach channels, key trenches, foundation of Buildings and bridges and such simillar works in all kinds of soils, as...
Removal of Unserviceable Soil with Disposal upto a suitable distance as directed by the Engineer incharge of work
Providing and laying vitrified floor tiles in different sizes thickness to be specified by the manufacturer with water absorption less than 0.08 percentage and conforming to IS: 15622, of approved mak...
Providing and fixing of 2track x 2panel sliding windows made out of multi chambered UPVCMatching to RAL9016 sections and with minimum TiO2Titanium Dioxide at 6PHR with TPEThermo Plastic Elastomer and ...
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on spec...
Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix 1:3 1 cement: 3 fine sand including rounding off corners wherever required...
Providing SandS RCC SPUN / VIBRATED CAST PIPES REINFORCEDpipes NP3 Class conforming to IS:4581988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work site, ...
Compound wall :Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of...
Providing ThermoMechanically Treated bars of grade Fe500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent ...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5...
Providing and fixing Steel work in built up tubular round, square or rectangular hollow tubes etc. trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of a...
Fencing with G.I. barbed wire R.C.C. post placed at required distance, embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and en...
CC pavement Earth work in surface excavation for stripping, seating of bund, Road way, by manual means for lowering and leveling the ground for all works other than foundation and depth in all kinds o...
Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to me...
Supplying and applying non metalic floor hardener at rate of 2.50kg / sqm. For road concrete finishing work as per direction in charge APPVD Rate at Arsikere Depot Concrete work
Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M 15 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, ker...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...
Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M 30 grade made of CandD waste by block making machine with vibratory compaction laid in requir...
ETP PLANT Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m ...
Providing and fixing chorinated poly vinyl choride CPVC pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fitting fitting ...
Laying different Gradation of Metal in sludge tank including complete as per Direction of engineer incharge 40mm size aggregate
Laying different Gradation of Metal in sludge tank including complete as per Direction of engineer incharge 20mm size aggregate
Laying different Gradation of Metal in sludge tank including complete as per Direction of engineer incharge 06mm size aggregate
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direct...
BELT SKIMMER : Providing and fixing of BELT SKIMMER with 5 LPH tray with complete arrangement for skimming out oil etc complete
ACTVATED SAND FILTERS :Providing and fixing of 0.8 m dia pressure sand filter comprising of 5 mm thick 0.8 m dia shell joined with 10 mm thick M S flanges and Air vent pipe with gate value graded filt...
PRESSURE SAND FILTERS :Providing and fixing of 0.8 m dia pressure sand filter comprising of 5 mm thick 0.8 m dia shell joined with 10 mm thick M S flanges and Air vent pipe with gate value graded filt...
DOZING PUMPS WITH TANKS . Providing and fixing of poly electrode dozing tanks comprising of 100 liters capacity LDPE tank with electronic metering pump etc complete as per direction of engineer in ch...
Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
WATER SUPPLY Providing and fixing chorinated poly vinyl choride CPVC pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fit...
WATER SUPPLY Providing and fixing chorinated poly vinyl choride CPVC pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fit...
Supply of PPR Gate valve confirming to IS 158012008 and DIN Standards 8077/8092 50 mm nominal bore
KSRB 1311.1: Providing and placing on terrace, polyethylene water storage tanks with manhole lid and suitable locking arrangements, making holes of suitable diameter for inlet, outlet and over flow p...
Constructing brick masonry chamber of internal dimension 450x300mm and depth of 600mm inner dimensions with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plasterin...
Geophysical investigation at site for sinking borewells for supplying drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner o...
Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG and above 1100 CMF and above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars ...
Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG and above 1100 CMF and above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars ...
Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG and above 1100 CMF and above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars ...
Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG and above 1100 CMF and above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars ...
Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 42702001 and latest ammendments, electrical resistance welded steel tubes, ma...
Providing and fixing MS casing collars as per IS 1239 partII 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm minimum. The dimensions o...
Providing and laying at site of work MS casing caps as per IS 1239 partII 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm minimum. The...
TOILET BLOCK Providing and constructing load bearing wall with Solid Concrete blocks of size 400x 200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 con...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS ...
Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...
Providing and fixing water closet squatting pan Indian type W.C. pan with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually cont...
Providing and fixing chorinated poly vinyl choride CPVC pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fitting fitting ...
Providing and fixing chorinated poly vinyl choride CPVC pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fitting fitting ...
Providing and fixing brass stop cock of approved quality :15 mm nominal bore
600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190g
Providing and fixing Brass full way valve gate with C.I. wheel of approved quality screwed end : 25mm
Providing and fixing Brass full way valve gate with C.I. wheel of approved quality screwed end : 32mm
Providing and fixing Brass full way valve gate with C.I. wheel of approved quality screwed end : 40mm
RWH Supplying to work spot rolling, lowering and placing in position RCC perforated rings in the already excavated pit including loading and unloading at both the destinations with all lead and lift w...
Supplying, filling, spreading and leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads and lifts, all complete as per direction of Engineerinc...
Providing and fixing RCC Precast Cover Slab of size 0.8 m x 0.8 m x 0.2m of M25Design mix concrete with 12 mm steel at 120 mm c/c both ways, over Gate valve extension spindle with central opening alon...
Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications. Stone/Bould...
Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm Phase and Neutral and 1x1.0 sqmm Earth w...
Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch box
Long point above 6Mtr upto 10Mtr from tapping point to out let via switch box
Concealed Conduit System : Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and run...
25mm dia 2mm thick
Open Conduit System :Supplying heavy gauge PVC conduit pipe ....... dia ....... mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted ...
Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/N...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps one way Switch
Do 6Amps 3way socket
Do Stepped Fan Regulator
Do16Amps one way switch
Do 6Amps Bell push
Do 32Amps DP switch
Do 6/16Amps universal socket
Do TV/Telephone socket
DoRJ45/I.O.outlet Cat6
Supplying PVC/GI flexible conduit pipe .... mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Supplying and drawing UTPCAT 6E LAN cable
Supplying 4mm thick plastic sheet with necessary nitches for fixing switches, regulators etc , and fixing on existing wooden or metal box using N.F. screws
Supplying of .....feet PVC Batten with integrated LED tube .... W with high quality diffuser with Life of 25000 burning hours and 70 percentage lumen maintenance with CRI 80. Power Input: 220240Vat ...
LED Street light : .Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Inj...
Supplying of recess mounting non integral type ........ LED w luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded false ceiling clamps, Power LEDs with CCT 6500 degr...
Supplying of LED Floodlight with .......W System Power consumption pressure die cast aluminum housing with powder coating with IP 65 protection. 1, 200275V voltage with electronic Driver, PF 0.9, sho...
DoLED Floodlight 240W
Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/79 and also comply with IS: 1709/1984 with latest amendment, Rated voltage 220 V/50 Hz, Rated power inpu...
Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable for operate on 230V 50Hz, AC supply complete. 15" sweep 450mm Make: Crompton / Almonard
Supplying exhaust fan of 1440 RPM of 300mm 12" size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply
Fixing all types and all capacities fluorescent / CFL / false ceiling fixtures indoor on the wall / ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, required nos of round...
Supplying and fixing 32mm dia class A GI pipe bracket upto 2.7 meters long for fixing MV/SV/MH/FTL street light fitting of all capacities on wall using suitable clamps, bolts and nuts and wiring using...
Fixing a ceiling / wall mounting fan of all capacities and all types to the existing S hook together with supplying and fixing a 5 ampers ceiling rose, necessary length of 23/0.0076 inch PVC insulated...
Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5Amps ceiling rose with sufficient length of 23/0.0076inch PVC insulated twin core wire of approved make
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross3 with Short circuit breaking cap...
Supplying and fixing regular MCB distribution boards on wall/wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 ...
Do 8Way SP and N
Do 12Way SP and N
Supplying and fixing Moulded Case Circuit Breaker MCCB over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Ove...
Do 125Amps 25kA
Do 200Amps 36kA
Supplying, fixing and wiring 50/5 to 400/5Amps 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound
Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C
Supplying, fixing and wiring heavy duty low voltage capacitors conforming to IS 2834. 3 phase, 400/440 volts grade, for power factor improvement of rotating machineries like induction motor
Supplying, fixing and wiring Automatic Power Factor controller circuit unit fully, static units controlled by 14 stage microprocessor operation, relays LED display, self programming function for power...
Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, KVA, KWH, KVAR suitable for 3 phase, 4 wire LT network with ...
Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped...
Supplying ......... amps rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator...
Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. ...
Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit . The pit shou...
Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed ...
Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x3mm GI strip
Do 600x600x3mm Copper plate
Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS1554 Part1 or IS7098 Part1, Armouring strip thickness in average +5 percen...
Do 3.5 core 25 sqmm
Do 3.5 core 50 sqmm
Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff LT Cable 2.5 to 25 Sqmm
Do 35 to 95 Sqmm
Providing and laying in position 100mm dia stone ware pipe in existing trench
Supplying and drawing 3 core flat PVC sheathed submersible pump cable manufactured with electrolytic grade copper with flexible copper with low resistance conductor confirming to13:81301984 and virgin...
Distribution Transformer 3 Phase,11kV/433V Stacked CRGO Core with Oil as per IS1180 Part1: 2014 B. CABLE ENTRY TYPE 63 kVA, Aluminum Wdg, Star 2 5 Star
Double Pole TC Set for erection of Transformer on RCC/PSCC 9 Mtr Long Poles as per IS1977For 25/63/100 kVA 4/5 Star Rated Transformer onPSCC Pole 9 Mtr Long, 300 Kg WL
RCC Pole 9 Mtr Long, 145 Kg WL
PSCC Pole 11 Mtr Long, 365 Kg WL for Intermediate
Poles only as per REC Standards
11 kV, Horizontal Cross Arm Mild Steel
11 kV, 5 kN Composite/Polymeric Pin Insulator 24 mm
11 kV, 45 kN Polymeric Insulator
11 kV, 200 Amps Single Break GOS Dwg
Rabbit ACSR 6/3.35 mm Al + 1/3.35 mm St, Std Wt: 214 Kg/KMI
Stringing of conductor Rabbit ACSR binding of conductor on each insulator and dead ending on strain or disc/strain insulator by means of clamps
11 kV, 3 Core, XPLE HTUG Cable with pressure extruded inner sheeth, ROUND WIRE ARMOURED as per IS7098 Part2 Armouring wires dia and Resistivity as per IS3975 95 Sqmm, 54 GI Wires 2.5 mm Dia
Load Break Switch with Panel
Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff HT Cable 3x95 to 150 Sqmm
Digging of Pit 1.8 Mtr depth for errection of 9 to 10 Mtr Long Steel/RCC/PSCC supports as per approved Drawing Hard Soil
Digging of Pit 2.2 Mtr depth for erection of 11 Mtr Long RCC/PSCC supports as per approved Drawing Hard Soil
Erection of RCC/PSCC Pole of 9 to 10 Mtr long in a pit of 1.8 Mtr
Erection of PSCC Pole 11 Mtr Long 365 Kg WL in a pit of 2.2 Mtr
9 kV, 5 kA Lightning Arrester Metal Oxide Ceramic type with GROUND DISCONNECTOR Dwg
11 kV, DOLO Cutout Conventional to Erstwhile KEB Specification
LT Distribution Box for 100 kVA DTC with MCCB's Sheet Metal Dwg
Supplying and Fixing of Patch panel for LAN cabling 24 Port 10/100/1000 patch panel
Supplying and Fixing of …mtrs Cat6 Patch Cable. 1mtr
Supplying and fixing Electronic Trivector Meter ETV suitable for operation LT operation and CT operated meter in polycarbonate body in class 0.5 accuracy as per IS 14697 and completely wired
Supplying, erecting, testing and commissioning of ONLINE UPS system suitable for operation on 230V, 50Hz, A/C supply, with isolation transformer all accessories complete and Excluding batteries and wi...
Supplying, installation, testing and commissioning of 12V DC, AH batteries in poly propylene container for U.P.S. Sealed maintenance free batteries 60 /65 AH capacity
Supplying.....litres capacity vertical/horizontal type wall mounting Electrical water heater with 22 SWG copper/SS sheet metal inner Container tinned inside and anticorrosive paint outside and 20 SWG ...
Erection charges for fixing a …liters capacity wall mounting electric geysers using bolts, flat at one end nut and washers at the other end for through bolts and nuts and washers with 150x450x600mm ...
Supplying, installation, testing and commissioning of solar hot water heater comprising of solar Flat Plate Collector FPC of size 2120x1040x100mm and stainless steel hot water storage tank with stainl...
Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog ...
Labour charges for Erection, Electrification and ommissioning of Pumpsets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well caps...
Fabrication, Supplying, Erection, Testing and Commissioning of ...... Mtrs long polygon high mast with Single / Multiple telescopic sections having, minimum overlap distance of 1.5 times of top sectio...
Providing,supplying to work site, Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 80342000;3Phase, SS Bowland Impeller with Low volt Motor as per specifications,as per ne...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
annexure B.docx
Others - Bid Capacity • 0.01 MB
tarikere KW4 FINAL.doc
Tender Document • 0.99 MB
annexure A.docx
Others - LETTER OF CREDIT • 0.01 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .