CONSTRUCTION OF LIBRARY AND Computer IT BUILDING

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) Bd.A.1 Page No. 259 Reference No.BDA 1 SSR Item No.21.02

Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth/murum, ramming ,watering including shoring and strutting etc. complete. (Lift from 1.5m To 3.0 m.) Bd.A.4 Page No. 259 SSR Item No. 21.16 ReferenceNo.BDA 4

Excavation for foundation in Hard rock by chiselling, wedging, line drilling, etc. including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the building area stacking as directed, dewatering and back filling with available earth/ murum watering, ramming etc. complete. (Lift upto 1.5 m).Bd.A.6 Page No. 260 SSR Item No.21.20 Reference No.BDA 6

Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. Bd.A.11 Page No. 263 SSR Item No.21.37 Reference No.BDA 11

Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. As directed by Engineer in charge. 21.40 BDA

Transportation of excess soil not comsumed within the Site Boundry upto a lead of 7.50 kms. starting from any periphery of the site, using manual, mechanical equipments and machinery (i.e. manual labour, excavators, loaders and dumpers), including double handling of excess materials, disposing-off the excess material to a site approved by the local authority. The item rate should include all the performance and mobility related factors for manpower, mechanical equipments and machinery.

Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) treatment by treating the backfill in immediate contact with foundation at the rate of 5 litres of emulsion concentrate of 1.0 percent of clorophyrifos per square metre of vertical surface area covering 10 years guarantee on bond paper. As directed by Engineer in charge. 21.23 BDW

Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc.complete. With natural sand/V.S.I. quality Artificial Sand Bd. E. 1 Page No. 287 24.01 BDE 1 ( rate only)

Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for steps including steel centering, plywood/steel formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and oneycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.),with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand Bd.E.2 Page No. 288 and B.7 Page No 38 24.04 BDE 2

Providing and laying Cast in situ/Ready Mix cement concrete M- 25 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork ,cover blocks, laying/pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand Bd.F.3 Page No. 298 and B.7, Page No.38 25.13 BDF 3

Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including steel centering,formwork, cover blocks compacting and roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Bd.F.5 Page No. 300 and B-7,Page No 38. 25.33 BDF 5

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Bd.F.6 Page No. 300 and B.7, Page No.38 25.52 BDF 6

Providing and laying Cast in situ/Ready Mixcement concrete M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Bd.F.9 Page No. 303 and B.7, Page No.38 26.07 BDF 9

Providing and laying in situ M-25 cement concrete of trap / granite /quartzite / gneiss metal with 15% plum of trap stones for retaining walls and jetty etc. including necessary formwork, compacting, curing, bailing out water manually in tidal range etc. complete. Spec. No.Bd. E. 5; Page No. 67 / 2012 49.27 Bd.E.5

Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, compaction, finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. Complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Bd.F.8 Page No. 302 and B.7, Page No.38 25.72 BDF 8

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Bd.F.6 Page No.300 and B.7, Page No.38 25.52 BDF 6 (From Plinth PPC Level (top) till Terrace Floor Level Slab (top) and till Building top most point.)

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Bd.F.11 Page No. 304 and B.7, Page No. 38 (RCC Pardi/ Shear Walls/ Elevator Shaft Walls - M 25)

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap / quartzite /granite /gneiss metal for R.C.C. Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Bd. F. 13 Page No. 305 /I.S. 456 (2000 26.26 BDF 13A (Staircase of all types (landing and riser) - M 25)

Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis,copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. Bd.F.17, Page No. 306 26.33 BDF 17

Providing and applying Anti corrosive treatment to reinforcement as per cement polymer composite coating (C.P.C.C.) method developed by C.E.C.R.I. including cleaning the bar by means of any established mechanical or manual method for removing rust and deleterious material, applying rapid setting primer and cement polymer sealing coat of approved and licensed by CECRI including redoing the process if damage occurs during handling, stacking etc. complete. (With prior approval of SE) As directed by Engineer in Charge 26.36

Providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating,hoisting, erecting fixing in position, Making riveted/ bolted/ welded connection and one coat of anticorrosive paint and over it 2 coats of oil painting approved quality and shade etc. complete. Bd.C.8 Page No.278 23.04 BDC 8

Providing, Supplying and Mixing in the preparation of Cement Concrete, Cement Mortars and PCC, integral liquid waterproofing admixtures of Pidilite - Dr. FIXIT - PIDIPROOF LW or equivalent as per the dosage and the method of application as recommended by the manufacturer at all levels with all leads and lifts etc. complete.

FORM FINISHED FORMWORK: Providing, fabricating and erecting form work (centering and shuttering) at all levels and places wherever needed/specified as per drawing including striking with 12mm Plastic coated, marine resistant waterproof ply/Smooth finished MS plates with adjustable steel props of acceptable Staging system and with sufficient bracing as approved by consultant, design as per IS 14687 or latest, at any level including using shuttering oil as per structural consultants specifications, strutting, propping, removing the shuttering after stipulated period and re-propping. Cost to include designing of proper form work and staging system to suit the requirements,Submission of design calculations and shop drawings for approval,sealing the joints with heavy duty brown self adhesive tape, aligning to line and levels including M.S. Ties, PVC Spacer, Providing openings/ cutouts/ pockets, applying deshuttering chemical, Deshuttering as approved by the consultant etc., complete at all levels, double/tripple heights and profiles.[Measurement will be paid for the area of shuttering coming in contact with concrete only] Foundations / Raft

FORM FINISHED FORMWORK: Providing, fabricating and erecting form work (centering and shuttering) at all levels and places wherever needed/specified as per drawing including striking with 12mm Plastic coated, marine resistant waterproof ply/Smooth finished MS plates with adjustable steel props of acceptable Staging system and with sufficient bracing as approved by consultant, design as per IS 14687 or latest, at any level including using shuttering oil as per structural consultants specifications, strutting, propping, removing the shuttering after stipulated period and re-propping. Cost to include designing of proper form work and staging system to suit the requirements,Submission of design calculations and shop drawings for approval,sealing the joints with heavy duty brown self adhesive tape, aligning to line and levels including M.S. Ties, PVC Spacer, Providing openings/ cutouts/ pockets, applying deshuttering chemical, Deshuttering as approved by the consultant etc., complete at all levels, double/tripple heights and profiles.[Measurement will be paid for the area of shuttering coming in contact with concrete only] Columns: Rectangular / Square / Segmental

FORM FINISHED FORMWORK: Providing, fabricating and erecting form work (centering and shuttering) at all levels and places wherever needed/specified as per drawing including striking with 12mm Plastic coated, marine resistant waterproof ply/Smooth finished MS plates with adjustable steel props of acceptable Staging system and with sufficient bracing as approved by consultant, design as per IS 14687 or latest, at any level including using shuttering oil as per structural consultants specifications, strutting, propping, removing the shuttering after stipulated period and re-propping. Cost to include designing of proper form work and staging system to suit the requirements,Submission of design calculations and shop drawings for approval,sealing the joints with heavy duty brown self adhesive tape, aligning to line and levels including M.S. Ties, PVC Spacer, Providing openings/ cutouts/ pockets, applying deshuttering chemical, Deshuttering as approved by the consultant etc., complete at all levels, double/tripple heights and profiles.[Measurement will be paid for the area of shuttering coming in contact with concrete only] Columns: Circular / Elliptical / Semi-Curved ( Rate only)

FORM FINISHED FORMWORK: Providing, fabricating and erecting form work (centering and shuttering) at all levels and places wherever needed/specified as per drawing including striking with 12mm Plastic coated, marine resistant waterproof ply/Smooth finished MS plates with adjustable steel props of acceptable Staging system and with sufficient bracing as approved by consultant, design as per IS 14687 or latest, at any level including using shuttering oil as per structural consultants specifications, strutting, propping, removing the shuttering after stipulated period and re-propping. Cost to include designing of proper form work and staging system to suit the requirements,Submission of design calculations and shop drawings for approval,sealing the joints with heavy duty brown self adhesive tape, aligning to line and levels including M.S. Ties, PVC Spacer, Providing openings/ cutouts/ pockets, applying deshuttering chemical, Deshuttering as approved by the consultant etc., complete at all levels, double/tripple heights and profiles.[Measurement will be paid for the area of shuttering coming in contact with concrete only] Beams: Strainght / Curved / Segmental

FORM FINISHED FORMWORK: Providing, fabricating and erecting form work (centering and shuttering) at all levels and places wherever needed/specified as per drawing including striking with 12mm Plastic coated, marine resistant waterproof ply/Smooth finished MS plates with adjustable steel props of acceptable Staging system and with sufficient bracing as approved by consultant, design as per IS 14687 or latest, at any level including using shuttering oil as per structural consultants specifications, strutting, propping, removing the shuttering after stipulated period and re-propping. Cost to include designing of proper form work and staging system to suit the requirements,Submission of design calculations and shop drawings for approval,sealing the joints with heavy duty brown self adhesive tape, aligning to line and levels including M.S. Ties, PVC Spacer, Providing openings/ cutouts/ pockets, applying deshuttering chemical, Deshuttering as approved by the consultant etc., complete at all levels, double/tripple heights and profiles.[Measurement will be paid for the area of shuttering coming in contact with concrete only] Coffer Beams: Strainght / Curved / Segmental(Rate only)

FORM FINISHED FORMWORK: Providing, fabricating and erecting form work (centering and shuttering) at all levels and places wherever needed/specified as per drawing including striking with 12mm Plastic coated, marine resistant waterproof ply/Smooth finished MS plates with adjustable steel props of acceptable Staging system and with sufficient bracing as approved by consultant, design as per IS 14687 or latest, at any level including using shuttering oil as per structural consultants specifications, strutting, propping, removing the shuttering after stipulated period and re-propping. Cost to include designing of proper form work and staging system to suit the requirements,Submission of design calculations and shop drawings for approval,sealing the joints with heavy duty brown self adhesive tape, aligning to line and levels including M.S. Ties, PVC Spacer, Providing openings/ cutouts/ pockets, applying deshuttering chemical, Deshuttering as approved by the consultant etc., complete at all levels, double/tripple heights and profiles.[Measurement will be paid for the area of shuttering coming in contact with concrete only] Slabs: (flat, sloping, cantilevered or any other position) and Staircases

FORM FINISHED FORMWORK: Providing, fabricating and erecting form work (centering and shuttering) at all levels and places wherever needed/specified as per drawing including striking with 12mm Plastic coated, marine resistant waterproof ply/Smooth finished MS plates with adjustable steel props of acceptable Staging system and with sufficient bracing as approved by consultant, design as per IS 14687 or latest, at any level including using shuttering oil as per structural consultants specifications, strutting, propping, removing the shuttering after stipulated period and re-propping. Cost to include designing of proper form work and staging system to suit the requirements,Submission of design calculations and shop drawings for approval,sealing the joints with heavy duty brown self adhesive tape, aligning to line and levels including M.S. Ties, PVC Spacer, Providing openings/ cutouts/ pockets, applying deshuttering chemical, Deshuttering as approved by the consultant etc., complete at all levels, double/tripple heights and profiles.[Measurement will be paid for the area of shuttering coming in contact with concrete only] Coffer Slab: (flat, sloping, cantilevered or any other position) and Staircases) (Rate only)

FORM FINISHED FORMWORK: Providing, fabricating and erecting form work (centering and shuttering) at all levels and places wherever needed/specified as per drawing including striking with 12mm Plastic coated, marine resistant waterproof ply/Smooth finished MS plates with adjustable steel props of acceptable Staging system and with sufficient bracing as approved by consultant, design as per IS 14687 or latest, at any level including using shuttering oil as per structural consultants specifications, strutting, propping, removing the shuttering after stipulated period and re-propping. Cost to include designing of proper form work and staging system to suit the requirements,Submission of design calculations and shop drawings for approval,sealing the joints with heavy duty brown self adhesive tape, aligning to line and levels including M.S. Ties, PVC Spacer, Providing openings/ cutouts/ pockets, applying deshuttering chemical, Deshuttering as approved by the consultant etc., complete at all levels, double/tripple heights and profiles.[Measurement will be paid for the area of shuttering coming in contact with concrete only] RCC Pardi and Shear Walls: Strainght / Curved / Segmental

FORM FINISHED FORMWORK: Providing, fabricating and erecting form work (centering and shuttering) at all levels and places wherever needed/specified as per drawing including striking with 12mm Plastic coated, marine resistant waterproof ply/Smooth finished MS plates with adjustable steel props of acceptable Staging system and with sufficient bracing as approved by consultant, design as per IS 14687 or latest, at any level including using shuttering oil as per structural consultants specifications, strutting, propping, removing the shuttering after stipulated period and re-propping. Cost to include designing of proper form work and staging system to suit the requirements,Submission of design calculations and shop drawings for approval,sealing the joints with heavy duty brown self adhesive tape, aligning to line and levels including M.S. Ties, PVC Spacer, Providing openings/ cutouts/ pockets, applying deshuttering chemical, Deshuttering as approved by the consultant etc., complete at all levels, double/tripple heights and profiles.[Measurement will be paid for the area of shuttering coming in contact with concrete only] RELIEF FORMWORK (Rate only)

FORM FINISHED FORMWORK: Providing, fabricating and erecting form work (centering and shuttering) at all levels and places wherever needed/specified as per drawing including striking with 12mm Plastic coated, marine resistant waterproof ply/Smooth finished MS plates with adjustable steel props of acceptable Staging system and with sufficient bracing as approved by consultant, design as per IS 14687 or latest, at any level including using shuttering oil as per structural consultants specifications, strutting, propping, removing the shuttering after stipulated period and re-propping. Cost to include designing of proper form work and staging system to suit the requirements,Submission of design calculations and shop drawings for approval,sealing the joints with heavy duty brown self adhesive tape, aligning to line and levels including M.S. Ties, PVC Spacer, Providing openings/ cutouts/ pockets, applying deshuttering chemical, Deshuttering as approved by the consultant etc., complete at all levels, double/tripple heights and profiles.[Measurement will be paid for the area of shuttering coming in contact with concrete only] GROOVES IN CONCRETE SURFACES (as per pattern) (trapizoidal section) (using teakwood patti) 25 mm wide. (Rate only)

FORM FINISHED FORMWORK: Providing, fabricating and erecting form work (centering and shuttering) at all levels and places wherever needed/specified as per drawing including striking with 12mm Plastic coated, marine resistant waterproof ply/Smooth finished MS plates with adjustable steel props of acceptable Staging system and with sufficient bracing as approved by consultant, design as per IS 14687 or latest, at any level including using shuttering oil as per structural consultants specifications, strutting, propping, removing the shuttering after stipulated period and re-propping. Cost to include designing of proper form work and staging system to suit the requirements,Submission of design calculations and shop drawings for approval,sealing the joints with heavy duty brown self adhesive tape, aligning to line and levels including M.S. Ties, PVC Spacer, Providing openings/ cutouts/ pockets, applying deshuttering chemical, Deshuttering as approved by the consultant etc., complete at all levels, double/tripple heights and profiles.[Measurement will be paid for the area of shuttering coming in contact with concrete only] GROOVES IN CONCRETE SURFACES (as per pattern) (trapizoidal section) (using teakwood patti) 20 mm wide. (Rate only)

MURALS: Providing, fabricating, erecting and fixing in position shuttering formwork as per pattern and sizing using specializd material (details to be submitted by the contractor while quoting), giving fair finished concrete surfaces, making leak proof joints, using required couplers, tie bolts, M.S. Ties, concrete Spacer, providing openings/ cut-outs/ pockets, etc.; using required deshuttering emulsion which will not stain the concrete, etc. complete at all height, depths, lead & lift and required any height staging and supporting sturdy and braced. Also include removing & dismantling the aforesaid assembly after specified or as approved period from the day of casting of concrete.(Measurement: Surface area around the mural to the nearest square or rectangle or circle) (Proposed Material: Aluminium Cast/ Teak Wood/ MDF/ Fibreglass) Rate to include smooth finish and rendering if required, etc. all complete to the satisfaction of PM. On Wall ( rate only)

MURALS: Providing, fabricating, erecting and fixing in position shuttering formwork as per pattern and sizing using specializd material (details to be submitted by the contractor while quoting), giving fair finished concrete surfaces, making leak proof joints, using required couplers, tie bolts, M.S. Ties, concrete Spacer, providing openings/ cut-outs/ pockets, etc.; using required deshuttering emulsion which will not stain the concrete, etc. complete at all height, depths, lead & lift and required any height staging and supporting sturdy and braced. Also include removing & dismantling the aforesaid assembly after specified or as approved period from the day of casting of concrete.(Measurement: Surface area around the mural to the nearest square or rectangle or circle) (Proposed Material: Aluminium Cast/ Teak Wood/ MDF/ Fibreglass) Rate to include smooth finish and rendering if required, etc. all complete to the satisfaction of PM. On Ceiling ( rate only)

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually, striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete. Bd.G. 1 Page No.313 27.01 BDG 1 (Rate Only)

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete Bd.G.5 Page No. 315 27.05 BDG 5 (Rate Only)

Providing Autoclaved Aerated Concrete Block masonary of Ecolite or equivalent make conforming to IS:2185 (Part 3) - 1984 in extra fine jointing mortar of fixoblock of UltraTech or equivalent in superstructure including striking joints, raking out joints and scaffolding etc. Complete. (The test shall be carried out conforming to IS:6441 (Part I) - 1972) As directed by engineer in charge 27.15 BDG

Providing Autoclaved Aerated Concrete Block masonary of Ecolite or equivalent make conforming to IS:2185 (Part 3) - 1984 in extra fine jointing mortar of fixoblock of UltraTech or equivalent in Half brick thick wall including striking joints, raking out joints and scaffolding etc. Complete. (The test shall be carried out conforming to IS:6441 (Part I) - 1972) As directed by engineer in charge 27.16 BDG

Supplying and fixing of steel reinforcement Fe 415 of main MAKE (TISCON/SAIL/RINL) for brick masonry, uncoiling, straightening, cleaning, cutting, bending to shape and lengths as per details, placing in position, binding with 18 swg black annealed binding wire including supports, if required, at all levels including all leads, lifts, transportation etc. complete

Providing and constructing block masonry using Concrete Blocks as per drawings of approved quality in C.M. 1:4, for walls of thickness 115 mm or more in super-structure, and soaking the blocks in water, scaffolding required, raking the joints, cleaning and curing etc. at all levels with all leads and lifts etc. complete.

Providing and constructing block masonry using Concrete Blocks as per drawings of approved quality in C.M. 1:4, for walls of thickness 200 mm or more in super-structure, and soaking the blocks in water, scaffolding required, raking the joints, cleaning and curing etc. at all levels with all leads and lifts etc. complete.

Providing and constructing block masonry using Concrete Blocks as per drawings of approved quality in C.M. 1:4, for walls of thickness 230 mm or more in super-structure, and soaking the blocks in water, scaffolding required, raking the joints, cleaning and curing etc. at all levels with all leads and lifts etc. complete.

Providing and applying average 15 mm thk plaster in C.M. 1:4 finishing with White Cement Putty (smooth finish using combination of course and fine putty) at all levels, forming edges grooves to the finished plaster surface where it meets the skirting, door and window frames, as shown in detailed drawings and providing and applying Chicken Mesh (Plaster Mesh) made from Galvanized Iron Coils of 0.35 mm thick, dipped in hot zinc coating of 120 gms/sq.m. of 200 mm width to building surfaces of masonry and concrete joints, cutting, fixing with nails, including scaffolding, curing, forming edges and finishing the surfaces and cleaning with all leads and lifts etc. complete.

Providing and applying waterproof cement plaster of average 20 mm thk in two operations to brick and stone masonry and concrete surfaces in C.M. 1:3 with approved quality of water proofing compound mixing @ 2% by weight of cement including the cost of waterproofing material, and providing and applying Chicken Mesh (Plaster Mesh) made from Galvanized Iron Coils of 0.35 mm thick, dipped in hot zinc coating of 120 gms/sq.m. of 200 mm width to building surfaces of masonry and concrete joints, cutting, fixing with nails, at all levels including scaffolding, curing etc. with all leads and lifts etc. complete. and then applying a coat of PIDILITE - DR. FIXIT PIDIFIN 2K or equivalent to the surface of the water proof plaster as per manufactures specifications and dosage and method of application at all levels with all leads and lifts etc. complete.

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. Bd.L.7 Page No.369 32.11 BDL 7

Providing rough cast cement plaster externally in two coats with coloured cement finish to concrete/ brick/ stone masonry surfaces in all positions with base coat 12 to 15 mm. thick in C.M. 1:4 using gray cement and rough cast treatment 12 mm thick in proportion of 1:1 1/2:3 using colour pigment including scaffolding and fourteen days curing etc. complete. Bd.L.9, Page No.370 32.13 BDL 9

Providing and applying 18 mm (avg.) thick plaster in cement mortar mix ratio CM 1:6 (1 cement : 6 sand) to internal surfaces of concrete and masonry work; including raking out joints, hacking concrete surfaces as directed by PM to create a key, cleaning / grooving deep junctions of concrete & masonry, grouting then back by mortar; also providing and fixing 0.9mm dia GI wire mesh @ 150mm wide to junctions of concrete and masonry, preparing jambs, sills, grooves, pattas, wattas, rounding of corners, etc. all complete as per architectural drawings, specifications to satifcation of the PM at all leads, depth and lifts, doing independent double-legged scaffolding, cleaning of surfaces, curing, etc. complete as per specification and to the approval of the PM

Providing and fixing galvanized steel Corner Bead in finished plaster edges at door jambs and all projecting corners including using required screws/nails, straightening, making in plumb etc. all level with all leads and lifts etc. complete.

Providing and applying 2 Coats of high quality acrylic copolymer matt latex low VOC emulsion paint of approved shadethat gives smooth,flat and washable and durable finishing of approved make. Paint should have good flow levelling property with good colour retention and incan antibacterial property. Paint has to be applied on smooth and uniform surface prepared by an acrylic copolymer low VOC & Odour putty. This surface should be primed with water based low VOC acrylic copolymer based primer sealer that has incan antibacterial property. The work activity should cover all aspects of applying paints from surface preparation, filling to erecting and dismantling of scaffolding, finishing the surface etc as directed by Engineer in charge. As directed by Engineer in charge 48.13

Providing and applying interior wall finish luster of Asian / Berger / Nerolac / Dulux Paints or equivalent make on internal wall surface as detailed below Scrapping the surface with emery paper and wipe clean. Applying Asian / Berger / Nerolac / Duuex Paints or equivalent wall primer with brush with mineral turpentine with brush 8 to 10% and oil 15 to 20% with roller and allowing to dry for a period 6 to 8 hours. Applying Asian / Berger / Nerolac / Dulex Paints or equivalent Acrylic wall putty with appropriate proportion of water allowing to dry for period 4 to 6 hours. Scrapping with Emery paper 180 and wipe clean. Applying Asian / Berger / Nerolac / Dulux Paints or equivalent wall primer with brush with mineral turpentine 8 to 10% and oil 15 to 20% with roller Scrapping Emery paper 320 and wipe clean, Applying Asian / Berger / Nerolac / Dulux Paints or equivalent interior wall finish luster 1st coat with brush/rubber/spray with mineral turpentine 7 to 9% and Oil with roller 19 to 21% After 8 hours of activity Applying 2nd coat of Asian / Berger / Nerolac / Dulux Paints or equivalent interior wall finish Lustre with mineral turpentine 7 to 9 % with brush and Oil with roller 19 to 21% after allowing dry for the period of 6 to 8 hours activity. (With prior approval of S.E.) As directed by Engineer in charge. 36.20 BDP

Providing and applying Royale Luxury Emulsion of Asian / Berger / Nerolac / Dulex Paints or equivalent make on internal wall surface as detailed below Scrapping for surface with emery paper and wipe clean for area. Applying Asian / Berger / Nerolac / Dulex Paints or equivalent wall primer with brush by adding mineral turpentine oil by 8 to 10 % or water by 15 to 20% allowing to dry for 6 to 8 hoursAfter applying Asian / Berger / Nerolac / Dulex Paints or equivalent acrylic wall putty with appropriate prpportion of water of allow to dry for period of 4 to 6 hours of activity. Scrapping with emery paper and wipe clean Applying paints Royale Luxury emulsion 1st coat with brush water content water 40 to 45% or 65 to 70% by role Applying paints Royale luxury emulsion 2nd coat with brush with water content 40 to 45 % or 65 to 70 % by roller. (With prior approval of S.E.) As directed by Engineer in charge. 36.21 BDP

Providing and applying at all heights, leads and lifts white wash [three coats] of approved quality to the Elevator Shaft from inside including scaffolding, cleaning the surface etc. complete.

Providing and applying Anti-fungal Exterior grade (Weather Coat) Paint MATT finish on the plastered surface and concrete surface in approved shade (3 coats), including necessary back coat, all necessary scaffolding, required tools and plants at all levels with all leads and lifts etc. complete.

Providing and applying Anti-fungal Exterior grade (Weather Coat) Paint TEXTURED finish (as per the manufacturers specification and application method) on the plastered surface and concrete surface in approved shade (3 coats), including necessary back coat, all necessary scaffolding, required tools and plants at all levels with all leads and lifts etc. complete.

Providing and applying Stonecrete Plaster of average 20 mm thk to rough plastered surfaces as per the specification of the manufacturer and as per the method of application by the authorized applicators, including making grooves and also the pattern as approved by the Architects using specific size of grains/ aggregates and providing and applying Chicken Mesh (Plaster Mesh) made from Galvanized Iron Coils of 0.35 mm thick, dipped in hot zinc coating of 120 gms/sq.m. of 200 mm width to building surfaces of masonry and concrete joints, cutting, fixing with nails, including scaffolding, curing, making grooves at regular intervals as shown in drawings with all leads and lifts etc. complete. (Basic Rate of Stonecrete Plaster = Rs. 65 per sq.ft]

Providing & Applying Gypsum Finishing on walls of 12-15 mm Thick with Necessary hacking of Concrete Surface with scaffolding etc complete

Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coatof cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed withapproved water proofing compound filling up to half depth of brickbats, curing this layer for 3 days, applying cement slurry over this layerjoints of brick bats with C.M.1:3 admixed with approved waterproofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1 Kg per bagincluding finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surfacewith false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etc. complete.As directed by Engineer in charge. 31.04 BDJ

Waterproofing treatment using Crystallization Method of 'XYPEX' Make or equivalent to all types of Reinforced Cement Concrete Works, as per manufacturers specifications and direction of use at all levels with all leads and lifts etc. complete.

Providing, cutting, laying it in position and fixing PLASTIC SHEET of 450 microns as underlay of Raft, Plinth PCC at all levels with all leads and lifts etc. complete.

Providing and applying cement slurry on RCC surfaces using 2.75 kg per sq.m. including cleaning the surface, roughening and dampening the surface at all levels with all leads and lifts etc. complete.

Supplying, providing and applying water proofing treatment with Membrane type water proofing methods using polymer modified Bituminous membrane of approved makes of Atactic Poly-Propylene (APP-4mm th) based with UV resistant, ground chemical resistant, high melting point more than 110deg. C, flexible and elastic with high adhesive strength. The membrane shall be reinforced with non woven polyester reinforcement of minimum of 180 g/sqm and reinforced including coating with compatible primer of Bituminous base and torch application with overlap of 100 mm wherever required. The reinforcement provided shall be able to withstand the traffic flow density and after construction and shall carry a minimum guarantee period of 10 years. Cost to include laying by loose and torching the prefabricated overlap at ends. The membrane surface shall be protected with granules.Approved makes (Polyplus/Fosroc/IWL/Tristar intec)

Providing and Laying 4kg mineral finish APP Modified Membrane of Texsa India Limited. After cleaning of all loose dirt and dust from a pre-sloped surface apply Solvent based bituminous primer @0.3 L per sqm on well sloped and smooth surface. When the primer is dry lay Moply FP 4kg mineral finish. MOPLY FP bituminous membrane with LPG connected torch on method. The membrane should have a weight not less than 4kgs /sqm and have a reinforcement of Polyester. The Tensile strength of the membrane should be 600N/5cm(Longitudinal) and Elongation as more than 35%. The tear resistance should be 100 N in transverse direction. The softening point of the membrane should be >150deg C and cold flexibility of –5deg C .The tear resistance should be 100 N in transverse direction and should pass resistance to aging and UV rays weather-O-meter for 2000 hrs. The side laps and end laps should have an overlap of 3-4inches and it should be thermofused together so that it forms a single sheet all throughout. A proper Gola has to be provided all though out the junction of roof and parapet. If the Parapet is of height < 2 feet than Moply FP 4kg gravel should be taken over the parapet and stuck on parapet. If the parapet is over 2 ft then a groove of size 2 X 2 inches should cut 30 cm over the Gola and the membrane shall be inserted there and sealed off with plaster. For Accessible roof ,Over this any protective layer can be done of either China Mosiac or screeding as directed by EIC.

Providing and Laying 4kg mineral finish APP Modified Membrane of Texsa India Limited. On the smooth PCC apply a Bituminous primer @ 0.3L per sqm. After the primer dries up apply Moply FP 4 KG Gravel on the surface with LPG connected torch on method. The membrane should have a weight not less than 4kgs /sqm and have a reinforcement of Polyester. The Tensile strength of the of the membrane should be 600N/5cm(Longitudinal) and Elongation as more than 35%. The tear resistance should be 100 N in transverse direction. The softening point of the membrane should be >150deg C and cold flexibility of –5deg C. The side laps and end laps should have an overlap of 3-4inches and it should be thermofused together so that it forms a single sheet all throughout. The membrane should be protected by 15mm plaster or Texsa’s Roofmate 15mm in order to avoid puncture while laying the Raft. Then the retaining walls has to be taken over the Moply FP 4 KG Gravel from the end of PCC. After the retaining walls have been taken over, the Moply FP 4 KG Gravel that has been left alone should be taken over the retaining wall and fixed as discussed earlier on the primed surface and fixed till end. All throughout the membrane should be protected either with Texsa’s Roofmate 15mm or Drentex Protect 50/80. Over the protection RCC work or backfilling as the case may be can be done. The entire process should be done as per EIC.

Providing and fixing 20 to 25 mm thick rough shahabad box type waterproofing for basement or underground floor on a base of Cement concrete 1:3:6, including sub base of 2.50 centimeter thick Cement mortar 1:3 with conceal, secrete (RMW), Algae proof or other alike waterproofing liquids, raking of joints upto 35 mm depth, filling the joints with 6 mm size crushed metal, hand grouting with cement slurry, curing and cleaning, with 7 years guarantee on court fee stamp of Rs. 100/- with ponding test etc complete. (excluding Cement concrete 1:3:6 base concrete ) Bd.J.2 Page No.355 31.12 BDJ

Providing and laying 52 mm thick cement concrete flooring with metallic hardener topping under layer 40 mm thick cement concrete 1:2:4 ( 1 Cement : 2 Coarse Sand : Graded Stone aggregate 20 nominal size ) and top layer of 12 mm thk. metallic concrete hardener consisting of mix 1:2 (1 cement hardener mix : 2 stone aggregate 6 mm nominal size ) by volume with which metallic hardening compound of approved quality is mixed in the ratio 4:1 ( 4 parts of cement : 1 part of metallic floor hardening compound of approved quality ) by weight including cement slurry, at all levels of the building with all leads and lifts etc. complete.

Providing and laying Indian Patent Stone (IPS) flooring 75 mm thick with 65 mm thick cement concrete 1:2:4 ( 1 Cement : 2 Coarse Sand : Graded Stone aggregate 20 nominal size ) and top layer of 10 mm thk. cement slurry in C.M. 1:3, finishing the surface with trowel to receive a smooth finish, including making thread impression at a grid of 600 mm at all levels of the building with all leads and lifts etc. complete.

Providing and laying fully vitrified, high stain resistant tiles of size 600 mm x 600 mm (thickness as per manufacturers specification) for flooring and skirting with bed mortar C.M. 1:4, filing the joints with grout agents and finishing the joints with grout sealants, as per pattern as shown in drawings including cutting (if required), neat finishing the surface at all levels with all leads and lifts etc. complete [Basic Rate : Rs. 145 per sq.ft.].

Providing and laying fully vitrified, high stain resistant tiles of size 300 mm x 600 mm (thickness as per manufacturers specification) for DADO with bed mortar C.M. 1:4, filing the joints with grout agents and finishing the joints with grout sealants, as per pattern as shown in drawings including cutting (if required), neat finishing the surface at all levels with all leads and lifts etc. complete [Basic Rate : Rs. 185 per sq.ft.].

Providing and laying Anti-Skid Fully Vitrified tiles of approved MAKE of size 300mmx300mm with spacers in flooring using necessary cement bedding in C.M. 1:4 upto 20 mm thick average cement slurry for fixing the tiles with required slopes, cutting, curing, cleaning, filling the joints with pigments of similar colour and at all levels with all leads and lifts etc. complete as per directions of site in-charge and as per pattern required [ pastel - plain colour series ] [Basic Rate : Rs. 165 per sq.ft.].

Providing and laying Pre-Polished Granite tiles 20 mm thickness of size 300 mm x 600 mm and 600 mm x 600 mm of approved quality and source in flooring using necessary cement bedding in C.M. 1:4 upto 20 mm thick average cement slurry for fixing the tiles with required slopes, curing, cleaning, filling the joints with pigments of similar colour and at all levels with all leads and lifts etc. complete as per directions of site in-charge and as per pattern required [Basic Rate : Rs. 135 per sq.ft.].

Providing and laying Pre-Polished Granite (full length) of 18 mm thickness for Staircase RISER of approved quality and source in flooring using necessary cement bedding in C.M. 1:4 upto 20 mm thick average cement slurry for fixing the tiles with required slopes, curing, cleaning, filling the joints with pigments of similar colour and at all levels with all leads and lifts etc. complete as per directions of site in-charge and as per pattern required [Basic Rate : Rs. 135 per sq.ft.].

Providing and laying Pre-Polished Granite (full length) of 18 mm thickness for Staircase TREAD of approved quality and source in flooring using necessary cement bedding in C.M. 1:4 upto 20 mm thick average cement slurry for fixing the tiles with required slopes, curing, cleaning, filling the joints with pigments of similar colour and at all levels with all leads and lifts etc. complete as per directions of site in-charge and as per pattern required [Basic Rate : Rs. 135 per sq.ft.].

Providing and Laying Poly Vinyl Chloride (PVC) resin (anti-static) tiles of 3 mm thickness in Roll Form of minimum width if 1.50 m of approved MAKE, quality and colour, fixed with good quality acrylic glue and fixing/installation as per norm laid in BS:8203/1987 and AS:1884/1985 and the quality confirms to IS 3462 at all levels of the building with all leads and lifts etc. complete.period of 6 to 8 hours activity. (With prior approval of S.E.)SSR No.36.2. BDP .As directed by Engineer in charge.-Ground Floor

Providing and laying Kota Stone (full length of riser and tread) of minimum 18 mm thick and as directed of approved quality using necessary back coat of white cement in C.M. 1:3 upto 20 mm thick average cement slurry, curing, cleaning, filling the joints with pigments of similar colour, mirror polishing, edge rounding at all levels with all leads and lifts etc. complete as per directions of site in-charge [Basic Rate : Rs. 36 per sq.ft.] - RISER

Providing and laying Kota Stone (full length of riser and tread) of minimum 18 mm thick and as directed of approved quality using necessary back coat of white cement in C.M. 1:3 upto 20 mm thick average cement slurry, curing, cleaning, filling the joints with pigments of similar colour, mirror polishing, edge rounding at all levels with all leads and lifts etc. complete as per directions of site in-charge [Basic Rate : Rs. 36 per sq.ft.] - TREAD

Providing, cutting, laying and fixing Anti-Skid Tape of 3M Make ( 1 1/2" in width) on TREADS and OTHER PLACES, of approved colour, fixed as per manufacturers direction at all levels of the buildings with all leads and lifts etc. complete.

Providing and laying Rough Granite tiles 20 mm thickness of size 300 mm x 600 mm and 600 mm x 600 mm of approved quality and source in flooring using necessary cement bedding in C.M. 1:4 upto 20 mm thick average cement slurry for fixing the tiles with required slopes, curing, cleaning, filling the joints with pigments of similar colour and at all levels with all leads and lifts etc. complete as per directions of site in-charge and as per pattern required [Basic Rate : Rs. 135 per sq.ft.].

Providing and laying white cement base marble mosaic tiles of 25 x 25 cm of approved colour and pattern, with white and coloured marble chips upto maximum size of 6 mm for flooring in required positions set on a bed of C.M. 1:5, including neat cement float, filling joints with neat coloured cement slurry, curing, polishing and rubbing at all levels with all leads and lifts etc. complete.

Providing, cutting, laying and fixing it in position CARPET (fire retardant) of minimum 8 mm thickness in Roll Form of minimum width not less that 2.50 m of approved MAKE, quality and colour, fixed with good quality acrylic glue and fixing/installation as per manufacturers directions at all levels of the building with all leads and lifts etc. complete [Basic Rate : Rs. 105 per sq.ft.].

Providing and laying approved quality of mirror polished 18 mm thick Kotah stone in flooring and skirting (recessed) of various sizes (as per detailed drawing and pattern) with a proper bedding in C.M. 1:3, as per drawings, neat cement float, pointing to joints including cutting, champhering, dressing, fixing to required slope, neatly finishing the joints, mirror polishing the surface, curing, cleaning the surface, at all levels with all leads and lifts etc. complete.

Providing and laying approved quality of double polished 18 mm thick Kotah stone 100 mm high skirting (recessed) of various sizes (as per detailed drawing and pattern) with a proper bedding in C.M. 1:3, as per drawings, neat cement float, pointing to joints including cutting, champhering, dressing, fixing to required slope, neatly finishing the joints, mirror polishing the surface, curing, cleaning the surface, at all levels with all leads and lifts etc. complete.

Providing and laying approved quality of single polished 18 mm thick Kotah stone flooring of various sizes (as per detailed drawing and pattern) with a proper bedding in C.M. 1:3, as per drawings, neat cement float, pointing to joints including cutting, champhering, dressing, fixing to required slope, neatly finishing the joints, mirror polishing the surface, curing, cleaning the surface, at all levels with all leads and lifts etc. complete.

Same as 7.3 but in skirting of 100 mm high (recessed) of various sizes (as per detailed drawing and pattern) with a proper bedding in C.M. 1:3, as per drawings, neat cement float, pointing to joints including cutting, champhering, dressing, fixing to required slope, neatly finishing the joints, curing, cleaning the surface, at all levels with all leads and lifts etc. complete.

Providing, making, and fixing Window Sills and Skirting made out pre-polished GRANITE JET BLACK as approved as per detailed drawings and specifications, fixing the same on masonry surface, concrete surface with stainless steel cleats and in cement mortar, corner joints at 45 degrees, edge champhered at all levels of the building with all leads and lifts etc. complete [Basic Rate : Rs. 105 per sq.ft.].

Providing and laying Terracota tiles of size locally avaliable of approved quality and source in flooring using necessary cement bedding in C.M. 1:4 upto 20 mm thick average cement slurry for fixing the tiles with required slopes, curing, cleaning, filling the joints with pigments of similar colour and at all levels with all leads and lifts etc. complete as per directions of site in-charge and as per pattern required [Basic Rate : Rs. 65 per sq.ft.].

Providing and laying vitrified mirror / glossy finish tiles decorative type having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. completeSSR No.33.40-First Floor

Providing, making, and fixing Wash Basin Platform made out pre-polished GRANITE JET BLACK as approved as per detailed drawings and specifications, fixing the same on masonry surface, concrete surface with stainless steel cleats and in cement mortar, corner joints at 45 degrees, edge champhered including Kadappa undelay of minimum 35 mm thick at all levels of the building with all leads and lifts etc. complete [Basic Rate of Granite : Rs. 135 per sq.ft.].

Special Note: Bidders/ Tenderers to strictly study, understand and verify the detailed drawings submitted with the bidding/ tender document for all types of Doors, Windows, Ventilators and Glazings. With the bid the bidders should attach a Shop Drawing mentioning all the details on the sections used in terms of sizes and also if any deviations. While submitting the Tender, Bidders to give a complete rate analysis of each type of Doors, Windows, Ventilators and Glazings. While quoting the rate the bidder should take all the elements shown in the drawing including the all the ironmongery. (For all items of work mentioned under 8.0 are including Providing, fabricating, laying and fixing it in positions as per required fixtures and fastenings, neatly finishing the joints, sealing the joints at all levels of the building with all leads and lifts etc. complete. Bidders to verify the structural stability of the installed system (i.e. doors, windows, ventilators and glazing units). FLUSH DOORS (of required thickness) - D1

Special Note: Bidders/ Tenderers to strictly study, understand and verify the detailed drawings submitted with the bidding/ tender document for all types of Doors, Windows, Ventilators and Glazings. With the bid the bidders should attach a Shop Drawing mentioning all the details on the sections used in terms of sizes and also if any deviations. While submitting the Tender, Bidders to give a complete rate analysis of each type of Doors, Windows, Ventilators and Glazings. While quoting the rate the bidder should take all the elements shown in the drawing including the all the ironmongery. (For all items of work mentioned under 8.0 are including Providing, fabricating, laying and fixing it in positions as per required fixtures and fastenings, neatly finishing the joints, sealing the joints at all levels of the building with all leads and lifts etc. complete. Bidders to verify the structural stability of the installed system (i.e. doors, windows, ventilators and glazing units). FLUSH DOORS (of required thickness) - D2

Special Note: Bidders/ Tenderers to strictly study, understand and verify the detailed drawings submitted with the bidding/ tender document for all types of Doors, Windows, Ventilators and Glazings. With the bid the bidders should attach a Shop Drawing mentioning all the details on the sections used in terms of sizes and also if any deviations. While submitting the Tender, Bidders to give a complete rate analysis of each type of Doors, Windows, Ventilators and Glazings. While quoting the rate the bidder should take all the elements shown in the drawing including the all the ironmongery. (For all items of work mentioned under 8.0 are including Providing, fabricating, laying and fixing it in positions as per required fixtures and fastenings, neatly finishing the joints, sealing the joints at all levels of the building with all leads and lifts etc. complete. Bidders to verify the structural stability of the installed system (i.e. doors, windows, ventilators and glazing units). FLUSH DOORS (of required thickness) - D3 (FIRE DOOR WITH 3 HOUR RATING)

Special Note: Bidders/ Tenderers to strictly study, understand and verify the detailed drawings submitted with the bidding/ tender document for all types of Doors, Windows, Ventilators and Glazings. With the bid the bidders should attach a Shop Drawing mentioning all the details on the sections used in terms of sizes and also if any deviations. While submitting the Tender, Bidders to give a complete rate analysis of each type of Doors, Windows, Ventilators and Glazings. While quoting the rate the bidder should take all the elements shown in the drawing including the all the ironmongery. (For all items of work mentioned under 8.0 are including Providing, fabricating, laying and fixing it in positions as per required fixtures and fastenings, neatly finishing the joints, sealing the joints at all levels of the building with all leads and lifts etc. complete. Bidders to verify the structural stability of the installed system (i.e. doors, windows, ventilators and glazing units). FLUSH DOORS (of required thickness) - D4

Special Note: Bidders/ Tenderers to strictly study, understand and verify the detailed drawings submitted with the bidding/ tender document for all types of Doors, Windows, Ventilators and Glazings. With the bid the bidders should attach a Shop Drawing mentioning all the details on the sections used in terms of sizes and also if any deviations. While submitting the Tender, Bidders to give a complete rate analysis of each type of Doors, Windows, Ventilators and Glazings. While quoting the rate the bidder should take all the elements shown in the drawing including the all the ironmongery. (For all items of work mentioned under 8.0 are including Providing, fabricating, laying and fixing it in positions as per required fixtures and fastenings, neatly finishing the joints, sealing the joints at all levels of the building with all leads and lifts etc. complete. Bidders to verify the structural stability of the installed system (i.e. doors, windows, ventilators and glazing units). FLUSH DOORS (of required thickness) - D5

Special Note: Bidders/ Tenderers to strictly study, understand and verify the detailed drawings submitted with the bidding/ tender document for all types of Doors, Windows, Ventilators and Glazings. With the bid the bidders should attach a Shop Drawing mentioning all the details on the sections used in terms of sizes and also if any deviations. While submitting the Tender, Bidders to give a complete rate analysis of each type of Doors, Windows, Ventilators and Glazings. While quoting the rate the bidder should take all the elements shown in the drawing including the all the ironmongery. (For all items of work mentioned under 8.0 are including Providing, fabricating, laying and fixing it in positions as per required fixtures and fastenings, neatly finishing the joints, sealing the joints at all levels of the building with all leads and lifts etc. complete. Bidders to verify the structural stability of the installed system (i.e. doors, windows, ventilators and glazing units). FLUSH DOORS (of required thickness) - D6

Special Note: Bidders/ Tenderers to strictly study, understand and verify the detailed drawings submitted with the bidding/ tender document for all types of Doors, Windows, Ventilators and Glazings. With the bid the bidders should attach a Shop Drawing mentioning all the details on the sections used in terms of sizes and also if any deviations. While submitting the Tender, Bidders to give a complete rate analysis of each type of Doors, Windows, Ventilators and Glazings. While quoting the rate the bidder should take all the elements shown in the drawing including the all the ironmongery. (For all items of work mentioned under 8.0 are including Providing, fabricating, laying and fixing it in positions as per required fixtures and fastenings, neatly finishing the joints, sealing the joints at all levels of the building with all leads and lifts etc. complete. Bidders to verify the structural stability of the installed system (i.e. doors, windows, ventilators and glazing units). FLUSH DOORS (of required thickness) - D7

Special Note: Bidders/ Tenderers to strictly study, understand and verify the detailed drawings submitted with the bidding/ tender document for all types of Doors, Windows, Ventilators and Glazings. With the bid the bidders should attach a Shop Drawing mentioning all the details on the sections used in terms of sizes and also if any deviations. While submitting the Tender, Bidders to give a complete rate analysis of each type of Doors, Windows, Ventilators and Glazings. While quoting the rate the bidder should take all the elements shown in the drawing including the all the ironmongery. (For all items of work mentioned under 8.0 are including Providing, fabricating, laying and fixing it in positions as per required fixtures and fastenings, neatly finishing the joints, sealing the joints at all levels of the building with all leads and lifts etc. complete. Bidders to verify the structural stability of the installed system (i.e. doors, windows, ventilators and glazing units). FLUSH DOORS (of required thickness) - D8

Special Note: Bidders/ Tenderers to strictly study, understand and verify the detailed drawings submitted with the bidding/ tender document for all types of Doors, Windows, Ventilators and Glazings. With the bid the bidders should attach a Shop Drawing mentioning all the details on the sections used in terms of sizes and also if any deviations. While submitting the Tender, Bidders to give a complete rate analysis of each type of Doors, Windows, Ventilators and Glazings. While quoting the rate the bidder should take all the elements shown in the drawing including the all the ironmongery. (For all items of work mentioned under 8.0 are including Providing, fabricating, laying and fixing it in positions as per required fixtures and fastenings, neatly finishing the joints, sealing the joints at all levels of the building with all leads and lifts etc. complete. Bidders to verify the structural stability of the installed system (i.e. doors, windows, ventilators and glazing units). FLUSH DOORS (of required thickness) - D9

Special Note: Bidders/ Tenderers to strictly study, understand and verify the detailed drawings submitted with the bidding/ tender document for all types of Doors, Windows, Ventilators and Glazings. With the bid the bidders should attach a Shop Drawing mentioning all the details on the sections used in terms of sizes and also if any deviations. While submitting the Tender, Bidders to give a complete rate analysis of each type of Doors, Windows, Ventilators and Glazings. While quoting the rate the bidder should take all the elements shown in the drawing including the all the ironmongery. (For all items of work mentioned under 8.0 are including Providing, fabricating, laying and fixing it in positions as per required fixtures and fastenings, neatly finishing the joints, sealing the joints at all levels of the building with all leads and lifts etc. complete. Bidders to verify the structural stability of the installed system (i.e. doors, windows, ventilators and glazing units). FLUSH DOORS (of required thickness) - D10

Special Note: Bidders/ Tenderers to strictly study, understand and verify the detailed drawings submitted with the bidding/ tender document for all types of Doors, Windows, Ventilators and Glazings. With the bid the bidders should attach a Shop Drawing mentioning all the details on the sections used in terms of sizes and also if any deviations. While submitting the Tender, Bidders to give a complete rate analysis of each type of Doors, Windows, Ventilators and Glazings. While quoting the rate the bidder should take all the elements shown in the drawing including the all the ironmongery. (For all items of work mentioned under 8.0 are including Providing, fabricating, laying and fixing it in positions as per required fixtures and fastenings, neatly finishing the joints, sealing the joints at all levels of the building with all leads and lifts etc. complete. Bidders to verify the structural stability of the installed system (i.e. doors, windows, ventilators and glazing units). FLUSH DOORS (of required thickness) - D11

Special Note: Bidders/ Tenderers to strictly study, understand and verify the detailed drawings submitted with the bidding/ tender document for all types of Doors, Windows, Ventilators and Glazings. With the bid the bidders should attach a Shop Drawing mentioning all the details on the sections used in terms of sizes and also if any deviations. While submitting the Tender, Bidders to give a complete rate analysis of each type of Doors, Windows, Ventilators and Glazings. While quoting the rate the bidder should take all the elements shown in the drawing including the all the ironmongery. (For all items of work mentioned under 8.0 are including Providing, fabricating, laying and fixing it in positions as per required fixtures and fastenings, neatly finishing the joints, sealing the joints at all levels of the building with all leads and lifts etc. complete. Bidders to verify the structural stability of the installed system (i.e. doors, windows, ventilators and glazing units). FLUSH DOORS (of required thickness) - D12

Special Note: Bidders/ Tenderers to strictly study, understand and verify the detailed drawings submitted with the bidding/ tender document for all types of Doors, Windows, Ventilators and Glazings. With the bid the bidders should attach a Shop Drawing mentioning all the details on the sections used in terms of sizes and also if any deviations. While submitting the Tender, Bidders to give a complete rate analysis of each type of Doors, Windows, Ventilators and Glazings. While quoting the rate the bidder should take all the elements shown in the drawing including the all the ironmongery. (For all items of work mentioned under 8.0 are including Providing, fabricating, laying and fixing it in positions as per required fixtures and fastenings, neatly finishing the joints, sealing the joints at all levels of the building with all leads and lifts etc. complete. Bidders to verify the structural stability of the installed system (i.e. doors, windows, ventilators and glazing units). FLUSH DOORS (of required thickness) - D13

Special Note: Bidders/ Tenderers to strictly study, understand and verify the detailed drawings submitted with the bidding/ tender document for all types of Doors, Windows, Ventilators and Glazings. With the bid the bidders should attach a Shop Drawing mentioning all the details on the sections used in terms of sizes and also if any deviations. While submitting the Tender, Bidders to give a complete rate analysis of each type of Doors, Windows, Ventilators and Glazings. While quoting the rate the bidder should take all the elements shown in the drawing including the all the ironmongery. (For all items of work mentioned under 8.0 are including Providing, fabricating, laying and fixing it in positions as per required fixtures and fastenings, neatly finishing the joints, sealing the joints at all levels of the building with all leads and lifts etc. complete. Bidders to verify the structural stability of the installed system (i.e. doors, windows, ventilators and glazing units). FLUSH DOORS (of required thickness) - D14

Special Note: Bidders/ Tenderers to strictly study, understand and verify the detailed drawings submitted with the bidding/ tender document for all types of Doors, Windows, Ventilators and Glazings. With the bid the bidders should attach a Shop Drawing mentioning all the details on the sections used in terms of sizes and also if any deviations. While submitting the Tender, Bidders to give a complete rate analysis of each type of Doors, Windows, Ventilators and Glazings. While quoting the rate the bidder should take all the elements shown in the drawing including the all the ironmongery. (For all items of work mentioned under 8.0 are including Providing, fabricating, laying and fixing it in positions as per required fixtures and fastenings, neatly finishing the joints, sealing the joints at all levels of the building with all leads and lifts etc. complete. Bidders to verify the structural stability of the installed system (i.e. doors, windows, ventilators and glazing units). FLUSH DOORS (of required thickness) - D15

Special Note: Bidders/ Tenderers to strictly study, understand and verify the detailed drawings submitted with the bidding/ tender document for all types of Doors, Windows, Ventilators and Glazings. With the bid the bidders should attach a Shop Drawing mentioning all the details on the sections used in terms of sizes and also if any deviations. While submitting the Tender, Bidders to give a complete rate analysis of each type of Doors, Windows, Ventilators and Glazings. While quoting the rate the bidder should take all the elements shown in the drawing including the all the ironmongery. (For all items of work mentioned under 8.0 are including Providing, fabricating, laying and fixing it in positions as per required fixtures and fastenings, neatly finishing the joints, sealing the joints at all levels of the building with all leads and lifts etc. complete. Bidders to verify the structural stability of the installed system (i.e. doors, windows, ventilators and glazing units). FD 1 (FIRE DOOR WITH 3 HOUR RATING)

Special Note: Bidders/ Tenderers to strictly study, understand and verify the detailed drawings submitted with the bidding/ tender document for all types of Doors, Windows, Ventilators and Glazings. With the bid the bidders should attach a Shop Drawing mentioning all the details on the sections used in terms of sizes and also if any deviations. While submitting the Tender, Bidders to give a complete rate analysis of each type of Doors, Windows, Ventilators and Glazings. While quoting the rate the bidder should take all the elements shown in the drawing including the all the ironmongery. (For all items of work mentioned under 8.0 are including Providing, fabricating, laying and fixing it in positions as per required fixtures and fastenings, neatly finishing the joints, sealing the joints at all levels of the building with all leads and lifts etc. complete. Bidders to verify the structural stability of the installed system (i.e. doors, windows, ventilators and glazing units). Other Doors/ Shutters etc. Kitchen Entrance Door - MS Grill Door (TATA Sections to be used)

Special Note: Bidders/ Tenderers to strictly study, understand and verify the detailed drawings submitted with the bidding/ tender document for all types of Doors, Windows, Ventilators and Glazings. With the bid the bidders should attach a Shop Drawing mentioning all the details on the sections used in terms of sizes and also if any deviations. While submitting the Tender, Bidders to give a complete rate analysis of each type of Doors, Windows, Ventilators and Glazings. While quoting the rate the bidder should take all the elements shown in the drawing including the all the ironmongery. (For all items of work mentioned under 8.0 are including Providing, fabricating, laying and fixing it in positions as per required fixtures and fastenings, neatly finishing the joints, sealing the joints at all levels of the building with all leads and lifts etc. complete. Bidders to verify the structural stability of the installed system (i.e. doors, windows, ventilators and glazing units). MS Rolling Shutter - RS

Special Note: Bidders/ Tenderers to strictly study, understand and verify the detailed drawings submitted with the bidding/ tender document for all types of Doors, Windows, Ventilators and Glazings. With the bid the bidders should attach a Shop Drawing mentioning all the details on the sections used in terms of sizes and also if any deviations. While submitting the Tender, Bidders to give a complete rate analysis of each type of Doors, Windows, Ventilators and Glazings. While quoting the rate the bidder should take all the elements shown in the drawing including the all the ironmongery. (For all items of work mentioned under 8.0 are including Providing, fabricating, laying and fixing it in positions as per required fixtures and fastenings, neatly finishing the joints, sealing the joints at all levels of the building with all leads and lifts etc. complete. Bidders to verify the structural stability of the installed system (i.e. doors, windows, ventilators and glazing units). MS Rolling Shutter - RS 1

SLIDING DOORS: Aluminium Sections and Glass (JINDAL and INDAL Sections to be used and Glass from Modi Float/ Gujrat Guardian of required thickness. SD 1

SLIDING DOORS: Aluminium Sections and Glass (JINDAL and INDAL Sections to be used and Glass from Modi Float/ Gujrat Guardian of required thickness. SD 2

SLIDING DOORS: Aluminium Sections and Glass (JINDAL and INDAL Sections to be used and Glass from Modi Float/ Gujrat Guardian of required thickness. Ventilator - V 1

SLIDING DOORS: Aluminium Sections and Glass (JINDAL and INDAL Sections to be used and Glass from Modi Float/ Gujrat Guardian of required thickness. Ventilator - V 2

SLIDING DOORS: Aluminium Sections and Glass (JINDAL and INDAL Sections to be used and Glass from Modi Float/ Gujrat Guardian of required thickness. Ventilator - V 3

Providing, making, and fixing door frames made out pre-polished GRANITE JET BLACK as per detailed drawings and specifications, fixing the same on masonry surface, concrete surface with stainless steel cleats and in cement mortar, corner joints at 45 degrees, edge champhered, making the locking arrangement at all levels of the building with all leads and lifts etc. complete [Bidders to consider the door frame as a single element comprising of two granite strips attached with each other) [Basic Rate of Jet Black Granite: Rs. 85 per sq.ft.]

Aluminium Sections and Glass (JINDAL Sections to be used and Glass from Modi Float/ Gujrat Guardian of required thickness. W1 and W2

Aluminium Sections and Glass (JINDAL Sections to be used and Glass from Modi Float/ Gujrat Guardian of required thickness. W3 and W4

Aluminium Sections and Glass (JINDAL Sections to be used and Glass from Modi Float/ Gujrat Guardian of required thickness. W5, W6, W7, W8, W9, W10, W11

Aluminium Sections and Glass (JINDAL Sections to be used and Glass from Modi Float/ Gujrat Guardian of required thickness.-W12

Providing, fabricating and fixing it in position Mild Steel Railing (brush finish) 80 mm (OD) (CURVED OR STRAIGHT) pipe as per detailed drawing and specifications including all types of stainless steel Box sections, flats, plates, anchor fasteners required and making the entire system structurally safe and stable, with required scaffolding, applying zinc oxide primer (2 coats) and finished with 2 or more coats of paint (used for auotmobiles) at all levels of the building with all leads and lifts etc,. complete [Bidders are requested to submit a Shop Drawings in consultation with the approved manufacturers].

Providing, cutting, laying and fixing it firm in position rigid PVC pipes including all necessary fixtures and fittings with all leads up to any depth and height and all lifts at all levels including cost of all labour, transportation etc. complete. - 3" dia.

Providing, cutting, laying and fixing it firm in position rigid PVC pipes including all necessary fixtures and fittings with all leads up to any depth and height and all lifts at all levels including cost of all labour, transportation etc. complete. - 6" dia.

Providing and Laying NP2 class RCC hume pipe including collars, jointing the same in C.M. 1:2 including testing of the joints, curing the joints and leads up to any depth and all lifts at all levels including cost of all labour, transportation etc. complete. - 225 mm dia.

Providing and Laying NP2 class RCC hume pipe including collars, jointing the same in C.M. 1:2 including testing of the joints, curing the joints and leads up to any depth and all lifts at all levels including cost of all labour, transportation etc. complete. - 150 mm dia.

Providing, laying, fixing and finishing false ceiling 12 mm thick (GYPSUM) (seamless and waterproof type) with G.I. framework including all necessary fixtures and fittings for any required height/ depth, making holes for light fittings and fixtures, with all leads up to any depth and height and all lifts at all levels including cost of all labour, transportation etc. complete.

ACOUSTICAL FALSE CEILING: Providing & Fixing PERFORATED ALUMINIUM FALSE CEILING as per approved sample with necessary Material , Labour , Scaffolding and other misc. items etc complete

Providing & Fixing ALUMINIUM 300X300 TILES FOR FALSE CEILING as per approved sample with necessary Material , labour , Scaffolding and other misc. items etc complete

Providing, Casting (including making for form work and getting it approved from the Architects), laying it in position, fixing, finsihing JALI made from concrete (reinforced) as per required pattern, design and details given in drawing and using white cement as main base/ ingredient. Bidder to access and then quote accordingly how the JALI can be made in parts, installed at required location and making the entire installation structurally sound, stable, safe and neatly anchored to the periphery.

Providing, cutting, laying and fixing it firm in position Wire Gauze (Galvanized mild steel wire gauze, 85G, 0.56 mm dia.) on the outer edges of UPVC and NP2 Class pipes including all necessary fixtures and fittings with all leads up to any depth and height and all lifts at all levels including cost of all labour, transportation etc. complete.

SITC of Client's/ Architect's approved make special coloured vitreous chinaware Extended & open cistern wall Mounted European WC conforming to Pattern 2 of IS: 2556 (Part -II).The WC shall be comprising of the following: a) Cistern with lid comprising water saving dual flush 3Ltr/6Ltr. b) All standard accessories required to couple the cistern with EWC from the manufacturer. c) CI chair supports with fastners/bolts for the water closet. d) Matching coloured solid plastic seat & cover very heavy quality with rubber buffers fixed to the closet with CP brass pillar hinges. e) Making holes in walls/floors & making good all complete.

SITC of Client's/ Architect's approved , Vitreous chinaware Wash basin,with supporting MS or CI brackets.

SITC of Client's/ Architect's approved , Vitreous chinaware Flatback urinal,with supporting MS or CI brackets

SITC of Client's/ Architect's approved make two way Bib Tap(for WC with necessary fittings & accessories all complete.

SITC of Client's/ Architect's approved make Health Faucet with 1m long easy flex tube , extension nipple,accessories etc. complete.

SITC of Client's/ Architect's approved C.P. fitings for Wash Basin as mentioned below with necessary fittings & accessories. 1No 15mm CP brass single lever wash basin pillar cock for washbasin area with fittings all complete.

SITC of Client's/ Architect's approved C.P. fitings for Wash Basin as mentioned below with necessary fittings & accessories 1 No. heavy quality CP brass angular stop cock 15mm size with 1m length Braided Hose connector pipe. The supporting bracket shall be provided with 3 coats of approved paint of approved shade.

SITC of Client's/ Architect's approved C.P. fitings for Wash Basin as mentioned below with necessary fittings & accessories. 1 No. waste coupling 32mm size full threaded with 80mm height.

SITC of Client's/ Architect's approved, toilet paper holder (WC Area) with necessary fittings.

SITC and installation best Indian make CP brass liquid soap dispensers with CP brass bracket. FOR WASH BASIN AREA

SITC of pressmatic type stop cock for urinals including all necessory accessories as required.

SITC of pressmatic type Urinal Flush Valve for urinals including all necessory accessories as required.

Supply,installation,testing and commissioning of CPVC (Chlorinated Poly Vinyl Chloride) water supply pipes with pipe as per CTS SDR 11 (working pressure - 7 Bar @ 82 Deg C (however, testing pressure shall be 10 Bar) and 28 Bar @ 23 Deg C)for pipes from 1/2 Inch to 2 Inch. Schedule 40 Pipe to be used from 2-1/2 Inch to 6 Inch. Pipes shall be joined using solvent welded CPVC fittings i.e. Tees, Elbows, Couplers, Unions, Reducers, brushings etc. including transition fittings (connection between CPVC & metal pipe/GI) i.e. Brass Adaptors (both Male & Female threaded) conforming to ASTM D-2846. ASTM F441 with only CPVC solvent cement conforming to ASTM F-493. All termination points for installation of faucets shall have brass termination fittings. Installation shall be to as per Technical Manual of manufacturer of pipes & fittings. (In Internal toilet). Cost shall be inclusive of (a) Making maximum of 7.5 x 7.5 cm chasing in wall and floors for the pipe, making good the same by using 1:1 cement mortar over the wire mesh and providing protection to embedded pipes and fittings (in wall chase) by wrapping two layers of 400 micron polythene sheet including proper overlaps on joints complete as required. Hard PVC pipe sleeves suitable higher size shall be provided wherever the pipes are crossing the walls / floors slab and sealing the sleeves with glass wool in between and sealant compound at either end all as per Project Manager's / Consultant requirement. All termination points for installation of faucets shall have brass termination fittings. Installation shall be to as per Technical Manual of manufacturer of pipes & fittings.nical Manual of manufacturer of pipes & fittings. (for hot and cold water inside the toilet) - 15 mm

Supply,installation,testing and commissioning of CPVC (Chlorinated Poly Vinyl Chloride) water supply pipes with pipe as per CTS SDR 11 (working pressure - 7 Bar @ 82 Deg C (however, testing pressure shall be 10 Bar) and 28 Bar @ 23 Deg C)for pipes from 1/2 Inch to 2 Inch. Schedule 40 Pipe to be used from 2-1/2 Inch to 6 Inch. Pipes shall be joined using solvent welded CPVC fittings i.e. Tees, Elbows, Couplers, Unions, Reducers, brushings etc. including transition fittings (connection between CPVC & metal pipe/GI) i.e. Brass Adaptors (both Male & Female threaded) conforming to ASTM D-2846. ASTM F441 with only CPVC solvent cement conforming to ASTM F-493. All termination points for installation of faucets shall have brass termination fittings. Installation shall be to as per Technical Manual of manufacturer of pipes & fittings. (In Internal toilet). Cost shall be inclusive of (a) Making maximum of 7.5 x 7.5 cm chasing in wall and floors for the pipe, making good the same by using 1:1 cement mortar over the wire mesh and providing protection to embedded pipes and fittings (in wall chase) by wrapping two layers of 400 micron polythene sheet including proper overlaps on joints complete as required. Hard PVC pipe sleeves suitable higher size shall be provided wherever the pipes are crossing the walls / floors slab and sealing the sleeves with glass wool in between and sealant compound at either end all as per Project Manager's / Consultant requirement. All termination points for installation of faucets shall have brass termination fittings. Installation shall be to as per Technical Manual of manufacturer of pipes & fittings.nical Manual of manufacturer of pipes & fittings. (for hot and cold water inside the toilet) - 20 mm

Supply,installation,testing and commissioning of CPVC (Chlorinated Poly Vinyl Chloride) water supply pipes with pipe as per CTS SDR 11 (working pressure - 7 Bar @ 82 Deg C (however, testing pressure shall be 10 Bar) and 28 Bar @ 23 Deg C)for pipes from 1/2 Inch to 2 Inch. Schedule 40 Pipe to be used from 2-1/2 Inch to 6 Inch. Pipes shall be joined using solvent welded CPVC fittings i.e. Tees, Elbows, Couplers, Unions, Reducers, brushings etc. including transition fittings (connection between CPVC & metal pipe/GI) i.e. Brass Adaptors (both Male & Female threaded) conforming to ASTM D-2846. ASTM F441 with only CPVC solvent cement conforming to ASTM F-493. All termination points for installation of faucets shall have brass termination fittings. Installation shall be to as per Technical Manual of manufacturer of pipes & fittings. (In Internal toilet). Cost shall be inclusive of (a) Making maximum of 7.5 x 7.5 cm chasing in wall and floors for the pipe, making good the same by using 1:1 cement mortar over the wire mesh and providing protection to embedded pipes and fittings (in wall chase) by wrapping two layers of 400 micron polythene sheet including proper overlaps on joints complete as required. Hard PVC pipe sleeves suitable higher size shall be provided wherever the pipes are crossing the walls / floors slab and sealing the sleeves with glass wool in between and sealant compound at either end all as per Project Manager's / Consultant requirement. All termination points for installation of faucets shall have brass termination fittings. Installation shall be to as per Technical Manual of manufacturer of pipes & fittings.nical Manual of manufacturer of pipes & fittings. (for hot and cold water inside the toilet) - 25mm

Supply,installation,testing and commissioning of CPVC (Chlorinated Poly Vinyl Chloride) water supply pipes with pipe as per CTS SDR 11 (working pressure - 7 Bar @ 82 Deg C (however, testing pressure shall be 10 Bar) and 28 Bar @ 23 Deg C)for pipes from 1/2 Inch to 2 Inch. Schedule 40 Pipe to be used from 2-1/2 Inch to 6 Inch. Pipes shall be joined using solvent welded CPVC fittings i.e. Tees, Elbows, Couplers, Unions, Reducers, brushings etc. including transition fittings (connection between CPVC & metal pipe/GI) i.e. Brass Adaptors (both Male & Female threaded) conforming to ASTM D-2846. ASTM F441 with only CPVC solvent cement conforming to ASTM F-493. All termination points for installation of faucets shall have brass termination fittings. Installation shall be to as per Technical Manual of manufacturer of pipes & fittings. (In Internal toilet). Cost shall be inclusive of (a) Making maximum of 7.5 x 7.5 cm chasing in wall and floors for the pipe, making good the same by using 1:1 cement mortar over the wire mesh and providing protection to embedded pipes and fittings (in wall chase) by wrapping two layers of 400 micron polythene sheet including proper overlaps on joints complete as required. Hard PVC pipe sleeves suitable higher size shall be provided wherever the pipes are crossing the walls / floors slab and sealing the sleeves with glass wool in between and sealant compound at either end all as per Project Manager's / Consultant requirement. All termination points for installation of faucets shall have brass termination fittings. Installation shall be to as per Technical Manual of manufacturer of pipes & fittings.nical Manual of manufacturer of pipes & fittings. (for hot and cold water inside the toilet)- 32 mm

Supply,installation,testing and commissioning of CPVC (Chlorinated Poly Vinyl Chloride) water supply pipes with pipe as per CTS SDR 11 (working pressure - 7 Bar @ 82 Deg C (however, testing pressure shall be 10 Bar) and 28 Bar @ 23 Deg C)for pipes from 1/2 Inch to 2 Inch. Schedule 40 Pipe to be used from 2-1/2 Inch to 6 Inch. Pipes shall be joined using solvent welded CPVC fittings i.e. Tees, Elbows, Couplers, Unions, Reducers, brushings etc. including transition fittings (connection between CPVC & metal pipe/GI) i.e. Brass Adaptors (both Male & Female threaded) conforming to ASTM D-2846. ASTM F441 with only CPVC solvent cement conforming to ASTM F-493. All termination points for installation of faucets shall have brass termination fittings. Installation shall be to as per Technical Manual of manufacturer of pipes & fittings. (In Internal toilet). Cost shall be inclusive of (a) Making maximum of 7.5 x 7.5 cm chasing in wall and floors for the pipe, making good the same by using 1:1 cement mortar over the wire mesh and providing protection to embedded pipes and fittings (in wall chase) by wrapping two layers of 400 micron polythene sheet including proper overlaps on joints complete as required. Hard PVC pipe sleeves suitable higher size shall be provided wherever the pipes are crossing the walls / floors slab and sealing the sleeves with glass wool in between and sealant compound at either end all as per Project Manager's / Consultant requirement. All termination points for installation of faucets shall have brass termination fittings. Installation shall be to as per Technical Manual of manufacturer of pipes & fittings.nical Manual of manufacturer of pipes & fittings. (for hot and cold water inside the toilet) - 40mm

Supply,installation,testing and commissioning of CPVC (Chlorinated Poly Vinyl Chloride) water supply pipes with pipe as per CTS SDR 11 (working pressure - 7 Bar @ 82 Deg C (however, testing pressure shall be 10 Bar) and 28 Bar @ 23 Deg C)for pipes from 1/2 Inch to 2 Inch. Schedule 40 Pipe to be used from 2-1/2 Inch to 6 Inch. Pipes shall be joined using solvent welded CPVC fittings i.e. Tees, Elbows, Couplers, Unions, Reducers, brushings etc. including transition fittings (connection between CPVC & metal pipe/GI) i.e. Brass Adaptors (both Male & Female threaded) conforming to ASTM D-2846. ASTM F441 with only CPVC solvent cement conforming to ASTM F-493. All termination points for installation of faucets shall have brass termination fittings. Installation shall be to as per Technical Manual of manufacturer of pipes & fittings. (In Internal toilet). Cost shall be inclusive of (a) Making maximum of 7.5 x 7.5 cm chasing in wall and floors for the pipe, making good the same by using 1:1 cement mortar over the wire mesh and providing protection to embedded pipes and fittings (in wall chase) by wrapping two layers of 400 micron polythene sheet including proper overlaps on joints complete as required. Hard PVC pipe sleeves suitable higher size shall be provided wherever the pipes are crossing the walls / floors slab and sealing the sleeves with glass wool in between and sealant compound at either end all as per Project Manager's / Consultant requirement. All termination points for installation of faucets shall have brass termination fittings. Installation shall be to as per Technical Manual of manufacturer of pipes & fittings.nical Manual of manufacturer of pipes & fittings. (for hot and cold water inside the toilet) - 50mm

Supply,installation,testing and commissioning of CPVC (Chlorinated Poly Vinyl Chloride) water supply pipes with pipe as per CTS SDR 11 (working pressure - 7 Bar @ 82 Deg C (however, testing pressure shall be 10 Bar) and 28 Bar @ 23 Deg C)for pipes from 1/2 Inch to 2 Inch. Schedule 40 Pipe to be used from 2-1/2 Inch to 6 Inch. Pipes shall be joined using solvent welded CPVC fittings i.e. Tees, Elbows, Couplers, Unions, Reducers, brushings etc. including transition fittings (connection between CPVC & metal pipe/GI) i.e. Brass Adaptors (both Male & Female threaded) conforming to ASTM D-2846. ASTM F441 with only CPVC solvent cement conforming to ASTM F-493. All termination points for installation of faucets shall have brass termination fittings. Installation shall be to as per Technical Manual of manufacturer of pipes & fittings. (In Internal toilet). Cost shall be inclusive of (a) Making maximum of 7.5 x 7.5 cm chasing in wall and floors for the pipe, making good the same by using 1:1 cement mortar over the wire mesh and providing protection to embedded pipes and fittings (in wall chase) by wrapping two layers of 400 micron polythene sheet including proper overlaps on joints complete as required. Hard PVC pipe sleeves suitable higher size shall be provided wherever the pipes are crossing the walls / floors slab and sealing the sleeves with glass wool in between and sealant compound at either end all as per Project Manager's / Consultant requirement. All termination points for installation of faucets shall have brass termination fittings. Installation shall be to as per Technical Manual of manufacturer of pipes & fittings.nical Manual of manufacturer of pipes & fittings. (for hot and cold water inside the toilet) - 65mm

Supply,installation,testing and commissioning of CPVC (Chlorinated Poly Vinyl Chloride) water supply pipes with pipe as per CTS SDR 11 (working pressure - 7 Bar @ 82 Deg C (however, testing pressure shall be 10 Bar) and 28 Bar @ 23 Deg C)for pipes from 1/2 Inch to 2 Inch. Schedule 40 Pipe to be used from 2-1/2 Inch to 6 Inch. Pipes shall be joined using solvent welded CPVC fittings i.e. Tees, Elbows, Couplers, Unions, Reducers, brushings etc. including transition fittings (connection between CPVC & metal pipe/GI) i.e. Brass Adaptors (both Male & Female threaded) conforming to ASTM D-2846. ASTM F441 with only CPVC solvent cement conforming to ASTM F-493. All termination points for installation of faucets shall have brass termination fittings. Installation shall be to as per Technical Manual of manufacturer of pipes & fittings. (In Internal toilet). Cost shall be inclusive of (a) Making maximum of 7.5 x 7.5 cm chasing in wall and floors for the pipe, making good the same by using 1:1 cement mortar over the wire mesh and providing protection to embedded pipes and fittings (in wall chase) by wrapping two layers of 400 micron polythene sheet including proper overlaps on joints complete as required. Hard PVC pipe sleeves suitable higher size shall be provided wherever the pipes are crossing the walls / floors slab and sealing the sleeves with glass wool in between and sealant compound at either end all as per Project Manager's / Consultant requirement. All termination points for installation of faucets shall have brass termination fittings. Installation shall be to as per Technical Manual of manufacturer of pipes & fittings.nical Manual of manufacturer of pipes & fittings. (for hot and cold water inside the toilet)- 80mm

Providing and Fixing heavy class uPVC equivalent to ASTRAL AQUARIS BRAND PIPESSCH-80, confirming 12454B of ASTM D1784, for water supply with solvent cement joints including cutting the pipes to correct length, making good the same, testing, including providing and fixing with all types of UPVC fittings all complete. (Rate must be inclusive of fittings) ( For transfer pipes of water supply from pump rooms to tanks and terrace floor water supply looping )(in shafts/Exposed) Cost shall be inclusive of (a) Fixing/supporting the pipes (& fittings) at wall/ceiling level supported by galvanized clamps, hangers etc, as per specification. Exposed pipes to be painted of legends with direction arrow. Hard PVC pipe sleeves suitable higher size shall be provided wherever the pipes are crossing the walls / floors slab and sealing the sleeves with glass wool in between and sealant compound at either end all as per Project Manager's / Consultant requirement. All termination points for installation of faucets shall have brass termination fittings. Installation shall be to as per Technical Manual of manufacturer of pipes & fittings.Adhesive/solvent cement shall be used only from the original manufacturer of pipes' recommendation. - 15mm

Providing and Fixing heavy class uPVC equivalent to ASTRAL AQUARIS BRAND PIPESSCH-80, confirming 12454B of ASTM D1784, for water supply with solvent cement joints including cutting the pipes to correct length, making good the same, testing, including providing and fixing with all types of UPVC fittings all complete. (Rate must be inclusive of fittings) ( For transfer pipes of water supply from pump rooms to tanks and terrace floor water supply looping )(in shafts/Exposed) Cost shall be inclusive of (a) Fixing/supporting the pipes (& fittings) at wall/ceiling level supported by galvanized clamps, hangers etc, as per specification. Exposed pipes to be painted of legends with direction arrow. Hard PVC pipe sleeves suitable higher size shall be provided wherever the pipes are crossing the walls / floors slab and sealing the sleeves with glass wool in between and sealant compound at either end all as per Project Manager's / Consultant requirement. All termination points for installation of faucets shall have brass termination fittings. Installation shall be to as per Technical Manual of manufacturer of pipes & fittings.Adhesive/solvent cement shall be used only from the original manufacturer of pipes' recommendation. - 20mm

Providing and Fixing heavy class uPVC equivalent to ASTRAL AQUARIS BRAND PIPESSCH-80, confirming 12454B of ASTM D1784, for water supply with solvent cement joints including cutting the pipes to correct length, making good the same, testing, including providing and fixing with all types of UPVC fittings all complete. (Rate must be inclusive of fittings) ( For transfer pipes of water supply from pump rooms to tanks and terrace floor water supply looping )(in shafts/Exposed) Cost shall be inclusive of (a) Fixing/supporting the pipes (& fittings) at wall/ceiling level supported by galvanized clamps, hangers etc, as per specification. Exposed pipes to be painted of legends with direction arrow. Hard PVC pipe sleeves suitable higher size shall be provided wherever the pipes are crossing the walls / floors slab and sealing the sleeves with glass wool in between and sealant compound at either end all as per Project Manager's / Consultant requirement. All termination points for installation of faucets shall have brass termination fittings. Installation shall be to as per Technical Manual of manufacturer of pipes & fittings.Adhesive/solvent cement shall be used only from the original manufacturer of pipes' recommendation. - 25mm

Providing and Fixing heavy class uPVC equivalent to ASTRAL AQUARIS BRAND PIPESSCH-80, confirming 12454B of ASTM D1784, for water supply with solvent cement joints including cutting the pipes to correct length, making good the same, testing, including providing and fixing with all types of UPVC fittings all complete. (Rate must be inclusive of fittings) ( For transfer pipes of water supply from pump rooms to tanks and terrace floor water supply looping )(in shafts/Exposed) Cost shall be inclusive of (a) Fixing/supporting the pipes (& fittings) at wall/ceiling level supported by galvanized clamps, hangers etc, as per specification. Exposed pipes to be painted of legends with direction arrow. Hard PVC pipe sleeves suitable higher size shall be provided wherever the pipes are crossing the walls / floors slab and sealing the sleeves with glass wool in between and sealant compound at either end all as per Project Manager's / Consultant requirement. All termination points for installation of faucets shall have brass termination fittings. Installation shall be to as per Technical Manual of manufacturer of pipes & fittings.Adhesive/solvent cement shall be used only from the original manufacturer of pipes' recommendation. - 32mm

Providing and Fixing heavy class uPVC equivalent to ASTRAL AQUARIS BRAND PIPESSCH-80, confirming 12454B of ASTM D1784, for water supply with solvent cement joints including cutting the pipes to correct length, making good the same, testing, including providing and fixing with all types of UPVC fittings all complete. (Rate must be inclusive of fittings) ( For transfer pipes of water supply from pump rooms to tanks and terrace floor water supply looping )(in shafts/Exposed) Cost shall be inclusive of (a) Fixing/supporting the pipes (& fittings) at wall/ceiling level supported by galvanized clamps, hangers etc, as per specification. Exposed pipes to be painted of legends with direction arrow. Hard PVC pipe sleeves suitable higher size shall be provided wherever the pipes are crossing the walls / floors slab and sealing the sleeves with glass wool in between and sealant compound at either end all as per Project Manager's / Consultant requirement. All termination points for installation of faucets shall have brass termination fittings. Installation shall be to as per Technical Manual of manufacturer of pipes & fittings.Adhesive/solvent cement shall be used only from the original manufacturer of pipes' recommendation. -40mm

Providing and Fixing heavy class uPVC equivalent to ASTRAL AQUARIS BRAND PIPESSCH-80, confirming 12454B of ASTM D1784, for water supply with solvent cement joints including cutting the pipes to correct length, making good the same, testing, including providing and fixing with all types of UPVC fittings all complete. (Rate must be inclusive of fittings) ( For transfer pipes of water supply from pump rooms to tanks and terrace floor water supply looping )(in shafts/Exposed) Cost shall be inclusive of (a) Fixing/supporting the pipes (& fittings) at wall/ceiling level supported by galvanized clamps, hangers etc, as per specification. Exposed pipes to be painted of legends with direction arrow. Hard PVC pipe sleeves suitable higher size shall be provided wherever the pipes are crossing the walls / floors slab and sealing the sleeves with glass wool in between and sealant compound at either end all as per Project Manager's / Consultant requirement. All termination points for installation of faucets shall have brass termination fittings. Installation shall be to as per Technical Manual of manufacturer of pipes & fittings.Adhesive/solvent cement shall be used only from the original manufacturer of pipes' recommendation. - 50mm

Providing and Fixing heavy class uPVC equivalent to ASTRAL AQUARIS BRAND PIPESSCH-80, confirming 12454B of ASTM D1784, for water supply with solvent cement joints including cutting the pipes to correct length, making good the same, testing, including providing and fixing with all types of UPVC fittings all complete. (Rate must be inclusive of fittings) ( For transfer pipes of water supply from pump rooms to tanks and terrace floor water supply looping )(in shafts/Exposed) Cost shall be inclusive of (a) Fixing/supporting the pipes (& fittings) at wall/ceiling level supported by galvanized clamps, hangers etc, as per specification. Exposed pipes to be painted of legends with direction arrow. Hard PVC pipe sleeves suitable higher size shall be provided wherever the pipes are crossing the walls / floors slab and sealing the sleeves with glass wool in between and sealant compound at either end all as per Project Manager's / Consultant requirement. All termination points for installation of faucets shall have brass termination fittings. Installation shall be to as per Technical Manual of manufacturer of pipes & fittings.Adhesive/solvent cement shall be used only from the original manufacturer of pipes' recommendation. - 65mm

Providing and Fixing heavy class uPVC equivalent to ASTRAL AQUARIS BRAND PIPESSCH-80, confirming 12454B of ASTM D1784, for water supply with solvent cement joints including cutting the pipes to correct length, making good the same, testing, including providing and fixing with all types of UPVC fittings all complete. (Rate must be inclusive of fittings) ( For transfer pipes of water supply from pump rooms to tanks and terrace floor water supply looping )(in shafts/Exposed) Cost shall be inclusive of (a) Fixing/supporting the pipes (& fittings) at wall/ceiling level supported by galvanized clamps, hangers etc, as per specification. Exposed pipes to be painted of legends with direction arrow. Hard PVC pipe sleeves suitable higher size shall be provided wherever the pipes are crossing the walls / floors slab and sealing the sleeves with glass wool in between and sealant compound at either end all as per Project Manager's / Consultant requirement. All termination points for installation of faucets shall have brass termination fittings. Installation shall be to as per Technical Manual of manufacturer of pipes & fittings.Adhesive/solvent cement shall be used only from the original manufacturer of pipes' recommendation. - 180mm

Providing and Fixing heavy class uPVC equivalent to ASTRAL AQUARIS BRAND PIPESSCH-80, confirming 12454B of ASTM D1784, for water supply with solvent cement joints including cutting the pipes to correct length, making good the same, testing, including providing and fixing with all types of UPVC fittings all complete. (Rate must be inclusive of fittings) ( For transfer pipes of water supply from pump rooms to tanks and terrace floor water supply looping )(in shafts/Exposed) Cost shall be inclusive of (a) Fixing/supporting the pipes (& fittings) at wall/ceiling level supported by galvanized clamps, hangers etc, as per specification. Exposed pipes to be painted of legends with direction arrow. Hard PVC pipe sleeves suitable higher size shall be provided wherever the pipes are crossing the walls / floors slab and sealing the sleeves with glass wool in between and sealant compound at either end all as per Project Manager's / Consultant requirement. All termination points for installation of faucets shall have brass termination fittings. Installation shall be to as per Technical Manual of manufacturer of pipes & fittings.Adhesive/solvent cement shall be used only from the original manufacturer of pipes' recommendation. - 100mm

Supply, instalation, testing & commissioning of forged brass, male or female threaded isolation valve (Ball Valve), confirming to latest IS , PN 10, with necessary specials, union, nipples etc., to complete the job. - 50mm

Supply, instalation, testing & commissioning of forged brass, male or female threaded isolation valve (Ball Valve), confirming to latest IS , PN 10, with necessary specials, union, nipples etc., to complete the job. - 40mm

Supply, instalation, testing & commissioning of forged brass, male or female threaded isolation valve (Ball Valve), confirming to latest IS , PN 10, with necessary specials, union, nipples etc., to complete the job. - 32mm

Supply, instalation, testing & commissioning of forged brass, male or female threaded isolation valve (Ball Valve), confirming to latest IS , PN 10, with necessary specials, union, nipples etc., to complete the job. - 25mm

Supply, instalation, testing & commissioning of forged brass, male or female threaded isolation valve (Ball Valve), confirming to latest IS , PN 10, with necessary specials, union, nipples etc., to complete the job. - 20mm

Supply, instalation, testing & commissioning of forged brass, male or female threaded isolation valve (Ball Valve), confirming to latest IS , PN 10, with necessary specials, union, nipples etc., to complete the job. - 15mm

Providing, fixing and testing gun metal non return valve ( PN 10 )of approved quality with flanges along with all accessories as required.-65mm

Providing, fixing and testing gun metal non return valve ( PN 10 )of approved quality with flanges along with all accessories as required. - 50mm

Providing, fixing and testing gun metal non return valve ( PN 10 )of approved quality with flanges along with all accessories as required.-40mm

Providing, fixing and testing gun metal non return valve ( PN 10 )of approved quality with flanges along with all accessories as required.-32mm

Providing, fixing and testing gun metal non return valve ( PN 10 )of approved quality with flanges along with all accessories as required.-25mm

Providing, fixing and testing heavy quality CI Butterfly valve ( PN 10 )Slim seal type including suitable D table flanges and nuts,washers and bolts etc complete. - 100mm

Providing, fixing and testing heavy quality CI Butterfly valve ( PN 10 )Slim seal type including suitable D table flanges and nuts,washers and bolts etc complete.-80mm

Providing, fixing and testing heavy quality CI Butterfly valve ( PN 10 )Slim seal type including suitable D table flanges and nuts,washers and bolts etc complete.-65mm

Providing and fixing best Indian make CI flanged water meters direct reading type calibrated in 'litres & kilolitres tested and approved by Municipal Corporation with dirt box (strainer) including making necessary flanged joints, testing etc.complete. Note;water meters shall be provided with necessary bypass connection for maintanance purpose. - 50 mm size

Constructing brick masonry valve & meter chambers in 250mm thick brick masonry in cement mortar 1.5 using first class bricks constructed over a bed of 150mm thick cement concrete 1:2:4 plastering inside outside and all 'exposed surface with 20mm thick cement mortar 1.3, finishing 'inside with a floating coat of neat cement of size 2000 mm x 900 mm x 1200 mm deep & fixing CI frame & cover of 250 kg size, weight mentioned below painting all CI items with 3 coats of approved bitumastic paint etc. complete.--

Chamber 900 mm x 1200 mm clear inside with FRP cover of load bearing capacity of 12.5 tons and load tested as per BSEN124,IS 1726 and AASHTO M306 standards of size 900 mm x 1200 mm.

Providing and fixing best Indian make CP brass 15mm n.b air release valve with 15mm isolation valve. fixed on water lines.

Supplying, testing and commissioning automtic level controller(Hi/Low) including level float switch with 5mtr length cable,Control box 24V AC with indicator, with PLC based solenoid valve control panel(SCP) in overhead water tanks,Storage Flushing tank and Storage fire tanks as per the dimension of the water tanks including necessary electical and control cable cabling as per the drawing and connection to the pump panel.

Supplying and fixing Motorised Solenoid Valve,pilot operated diaphram type screwed end with IP65 coil and manual override & flow regulator, with all required accessories including the Electrical control cabling( 2Cx1.5 sq.mm FRLS cu multi standard screened ) between the valve and the solinoid valve control panel(SCP)/pump panel ( laying in shaft with suitable clamping and tyies )as required in conjunction with the layout plans.-32mm Dia

Supplying and fixing Motorised Solenoid Valve,pilot operated diaphram type screwed end with IP65 coil and manual override & flow regulator, with all required accessories including the Electrical control cabling( 2Cx1.5 sq.mm FRLS cu multi standard screened ) between the valve and the solinoid valve control panel(SCP)/pump panel ( laying in shaft with suitable clamping and tyies )as required in conjunction with the layout plans. - 40 mm Dia

Supplying and fixing Motorised Solenoid Valve,pilot operated diaphram type screwed end with IP65 coil and manual override & flow regulator, with all required accessories including the Electrical control cabling( 2Cx1.5 sq.mm FRLS cu multi standard screened ) between the valve and the solinoid valve control panel(SCP)/pump panel ( laying in shaft with suitable clamping and tyies )as required in conjunction with the layout plans.-50mm Dai

SITC FRP Manhole cover for Over head tank 600mm Dia. circular type 0.5 (B125)tons load carrying cpacity with all complete accessories

SITC FRP Manhole cover for Underground tank 1000mm*1200mm Side Wall type 12.5 (B125)tons load carrying cpacity with all complete accesories.

Supply, installation, testing & commissioning of Submersible pumps for Domestic Water Supply. (lpm120 & head 60met.)

Supply, installation, testing & commissioning of Submersible pumps for Flushing Water Supply. (lpm120 & head 60met.)

Supply, installation, testing & commissioning of Submersible pumps for Pump Room sump Water Discharge. (lpm200 & head 15met.)

Supply, installation, testing & commissioning of Submersible pumps for Basement Storm sump Water Discharge. (lpm200 & head 15met.)

Supply, installation, testing & commissioning as per architect for Two side flange sleeve - 50mm

Supply, installation, testing & commissioning as per architect for Two side flange sleeve - 65mm

Supply, installation, testing & commissioning as per architect for Two side flange sleeve - 80mm

Supply, installation, testing & commissioning as per architect for Two side flange sleeve - 100mm

Supply, installation, testing & commissioning as per architect for Two side flange sleeve - 150mm

Supply, installation, testing & commissioning as per architect for Two side flange sleeve - 200mm

Supply, installation, testing & commissioning as per architect for one side flange sleeve - 50mm

Supply, installation, testing & commissioning as per architect for One side flange sleeve - 65mm

Supply, installation, testing & commissioning as per architect for One side flange sleeve - 80mm

Supply, installation, testing & commissioning as per architect for One side flange sleeve - 100mm

Supply, installation, testing & commissioning as per architect for One side flange sleeve - 150mm

Supply, installation, testing & commissioning as per architect for One side flange sleeve - 200mm

Providing, fixing, jointing, testing and commissioning of UPVC SWR pipes(Type B pipes for waste pipe)confirming to IS : 13592 for below 75 mm dia pipe, and confirming to IS : 4985 for pipe upto 50 mm dia cut to required lengths including all necessary fittings and specials such as bends, junctions offsets, access pieces (plain or door) . Making proper connection with cement solvent joint as per BIS / manufacturer. Fixing at wall / ceiling level supported by G.I. clamps, hangers etc .making holes in walls/floors & making good all complete.(Pipes inside toilet). - 32 mm dia (agri 6 kg/cm2) can be used only for this item)

Providing, fixing, jointing, testing and commissioning of UPVC SWR pipes(Type B pipes for waste pipe)confirming to IS : 13592 for below 75 mm dia pipe, and confirming to IS : 4985 for pipe upto 50 mm dia cut to required lengths including all necessary fittings and specials such as bends, junctions offsets, access pieces (plain or door) . Making proper connection with cement solvent joint as per BIS / manufacturer. Fixing at wall / ceiling level supported by G.I. clamps, hangers etc .making holes in walls/floors & making good all complete.(Pipes inside toilet). - 40 mm dia (agri 6 kg/cm2) can be used only for this item)

Providing, fixing, jointing, testing and commissioning of UPVC SWR pipes(Type B pipes for waste pipe)confirming to IS : 13592 for below 75 mm dia pipe, and confirming to IS : 4985 for pipe upto 50 mm dia cut to required lengths including all necessary fittings and specials such as bends, junctions offsets, access pieces (plain or door) . Making proper connection with cement solvent joint as per BIS / manufacturer. Fixing at wall / ceiling level supported by G.I. clamps, hangers etc .making holes in walls/floors & making good all complete.(Pipes inside toilet). - 50 mm dia (agri 6 kg/cm2) can be used only for this item)

Providing, fixing, jointing, testing and commissioning of UPVC SWR pipes(Type B pipes for waste pipe)confirming to IS : 13592 for above 75 mm dia pipe, and confirming to IS : 4985 for pipe upto 50 mm dia cut to required lengths including all necessary fittings and specials such as bends, junctions offsets, access pieces (plain or door) . Making proper connection with cement solvent joint as per BIS / manufacturer. Fixing at wall / ceiling level supported by G.I. clamps, hangers etc .making holes in walls/floors & making good all complete.(Inside the shaft piping). - 80 mm dia can be used only for this item)-Type A(Vent pipe)

Providing, fixing, jointing, testing and commissioning of UPVC SWR pipes(Type B pipes for waste pipe)confirming to IS : 13592 for above 75 mm dia pipe, and confirming to IS : 4985 for pipe upto 50 mm dia cut to required lengths including all necessary fittings and specials such as bends, junctions offsets, access pieces (plain or door) . Making proper connection with cement solvent joint as per BIS / manufacturer. Fixing at wall / ceiling level supported by G.I. clamps, hangers etc .making holes in walls/floors & making good all complete.(Inside the shaft piping). - 80 mm dia can be used only for this item)-Type B(Waste Water pipe)

Providing, fixing, jointing, testing and commissioning of UPVC SWR pipes(Type B pipes for waste pipe)confirming to IS : 13592 for above 75 mm dia pipe, and confirming to IS : 4985 for pipe upto 50 mm dia cut to required lengths including all necessary fittings and specials such as bends, junctions offsets, access pieces (plain or door) . Making proper connection with cement solvent joint as per BIS / manufacturer. Fixing at wall / ceiling level supported by G.I. clamps, hangers etc .making holes in walls/floors & making good all complete.(Inside the shaft piping). - 110 mm dia can be used only for this item)

Providing, fixing, jointing, testing and commissioning of UPVC SWR pipes(Type B pipes for waste pipe)confirming to IS : 13592 for above 75 mm dia pipe, and confirming to IS : 4985 for pipe upto 50 mm dia cut to required lengths including all necessary fittings and specials such as bends, junctions offsets, access pieces (plain or door) . Making proper connection with cement solvent joint as per BIS / manufacturer. Fixing at wall / ceiling level supported by G.I. clamps, hangers etc .making holes in walls/floors & making good all complete.(Inside the shaft piping). - 160 mm dia can be used only for this item)

Providing, fixing, jointing, testing and commissioning Centrifugal C.I. spun pipe for soil, waste pipes installation conforming toIS:3989cut to required lengths including all necessary fittings and specials such as Bends, junctions, offsets, access pieces (plain or door) & vent cowl. Fixing at wall/ceiling level supported by galvanized steel clamps & hangers etc. duly epoxy coated. Making proper connection with drip seal PJS joint or pig lead joint of required depth as per manufacturer. Cutting, chases/holes in floors / walls / slab. (for lower most Floor to upto First chamber waste and soil drainage) - 75 mm dia

Providing, fixing, jointing, testing and commissioning Centrifugal C.I. spun pipe for soil, waste pipes installation conforming toIS:3989cut to required lengths including all necessary fittings and specials such as Bends, junctions, offsets, access pieces (plain or door) & vent cowl. Fixing at wall/ceiling level supported by galvanized steel clamps & hangers etc. duly epoxy coated. Making proper connection with drip seal PJS joint or pig lead joint of required depth as per manufacturer. Cutting, chases/holes in floors / walls / slab. (for lower most Floor to upto First chamber waste and soil drainage) - 100 mm dia

Providing, fixing, jointing, testing and commissioning Centrifugal C.I. spun pipe for soil, waste pipes installation conforming toIS:3989cut to required lengths including all necessary fittings and specials such as Bends, junctions, offsets, access pieces (plain or door) & vent cowl. Fixing at wall/ceiling level supported by galvanized steel clamps & hangers etc. duly epoxy coated. Making proper connection with drip seal PJS joint or pig lead joint of required depth as per manufacturer. Cutting, chases/holes in floors / walls / slab. (for lower most Floor to upto First chamber waste and soil drainage) - 150 mm dia

Providing, fixing, jointing, testing and commissioning UPVC (Type-B)Rain water down take pipeconforming to IS:13592 cut to required lengths including all necessary fittings and specials. Fixing at wall/ceiling level supported by galvanized steel clamps & hangers etc. Making proper connection with push fit ("O" ring )rubber joints as per BIS / manufacturer. Cutting, chases / holes in floors / walls / slab. -110 mm dia

Providing, fixing, jointing, testing and commissioning UPVC (Type-B)Rain water down take pipeconforming to IS:13592 cut to required lengths including all necessary fittings and specials. Fixing at wall/ceiling level supported by galvanized steel clamps & hangers etc. Making proper connection with push fit ("O" ring )rubber joints as per BIS / manufacturer. Cutting, chases / holes in floors / walls / slab. - 160 mm dia

Providing, fixing, jointing, testing and commissioning UPVC (Type-B)Rain water down take pipeconforming to IS:13592 cut to required lengths including all necessary fittings and specials. Fixing at wall/ceiling level supported by galvanized steel clamps & hangers etc. Making proper connection with push fit ("O" ring )rubber joints as per BIS / manufacturer. Cutting, chases / holes in floors / walls / slab. - 75 mm dia

SITC of SWR UPVC long arm Nahani trap 100X100x125 size as per IS standard of self cleansing design with water seal not less than 50mm 'with or without vent,including setting the trap in 1:2:4 cement concrete etc. complete.

SITC of SWR UPVC long arm Multi trap 100X100x175 size as per IS standard of self cleansing design with water seal not less than 50mm 'with or without vent,including setting the trap in 1:2:4 cement concrete etc. Complete.(NOTE:MULTI FLOOR TRAP)

Providing & fixing Floor / Urinal trap approved make stainless steel cockroach trap (150x150x70mm)assembly complete with ring, outer cup, inner cup, jali etc. As directed by Engineer-in-charge.

Providing, laying, fixing & comissioning of PVC vent cowlof ISI approved make & complete in all(For Rain water,soil, waste & Antisyphonage pipes ) - 80mm pipes

Providing, laying, fixing & comissioning of PVC vent cowlof ISI approved make & complete in all(For Rain water,soil, waste & Antisyphonage pipes ) - 110mm pipes

Providing, laying, fixing & comissioning of PVC vent cowlof ISI approved make & complete in all(For Rain water,soil, waste & Antisyphonage pipes ) - 160mm i pipes

SITC of cast iron rain water inlets with gravel guard and grating specially cast,screwed with S.S-304 grade screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement: 4 coarse sand) and making good the wall etc., generally conforming to drawings.complete. - 110mm pipes

SITC of cast iron rain water inlets with gravel guard and grating specially cast,screwed with S.S-304 grade screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement: 4 coarse sand) and making good the wall etc., generally conforming to drawings.complete. - 160mm pipes

Providing, fixing, jointing and testing HARD PVC WC pan connector of approved 'colour with or without 'vent horn all as per requirements including the expansion joints where ever of Engineer-'in-charge. Size 100mm i/d -'Length 300mm to 400mm.

Providing, laying to lines jointing with hemyarn and cement sand mortar 1:1 including bedding NP2 class(ISI MARKED)RCC spun pipes with collars joints as per IS 458, testing, rectification of leaks etc. complete.(For Sewage Line, manhole connections) - 150 mm

Providing, laying to lines jointing with hemyarn and cement sand mortar 1:1 including bedding NP2 class(ISI MARKED)RCC spun pipes with collars joints as per IS 458, testing, rectification of leaks etc. complete.(For Sewage Line, manhole connections) - 200 mm

Providing, laying to lines jointing with hemyarn and cement sand mortar 1:1 NP2 class(ISI MARKED)RCC spun pipes with collars joints as per IS 458, testing, rectification of leaks etc. complete.(For storm water Line) - 150mm

Providing, laying to lines jointing with hemyarn and cement sand mortar 1:1 NP2 class(ISI MARKED)RCC spun pipes with collars joints as per IS 458, testing, rectification of leaks etc. complete.(For storm water Line) - 200 mm

Providing, laying to lines jointing with hemyarn and cement sand mortar 1:1 NP2 class(ISI MARKED)RCC spun pipes with collars joints as per IS 458, testing, rectification of leaks etc. complete.(For storm water Line) - 250 mm

Providing & fixing square mouth salt glazed stoneware gully trap class A with FRP cover of load bearing capacity of 40 tons and load tested as per BSEN124,IS 1726 and AASHTO M306 standards at top including embedding the trap in reinforced cement concrete of 1:2:4 construction of brick masonry chamber internal clear size 450 x 450 mm in brick masonry 250mm thick in cement sand mortar 1:5 over 1:4:8 cement concrete 'bed 150mm thick, plastering inside outside and all exposed surfaces with 1:3 cement sand plaster 15mm thick .The Gully chamber cover should be of FRP material of size 450 x 450mm etc. complete.Gully trap with 110 inlet & 110mm outlet.

Construction of brick masonry inspection chambers with first quality burnt bricks in cement mortar 1:5, 250mm thick over 1:4:8 cement concrete foundation, 1:2:4 cement concrete for benching and channel cement mortar plaster 1:3 '20mm thick on inside outside and all exposed faces providing & fixing cast iron steps if depth of chamber exceeds 1200mm etc. complete. - Size of chamber 900mm x 450mm inside clear for sewer lines depth not exceeding 1200mm with FRP cover of load bearing capacity of 40 tons and load tested as per BSEN124,IS 1726 and AASHTO M306 standardsof size 900 x 450 mm.

Constructing conical manholes in 350mm brick masonry 1:5 over 230mm thick 1:4:8 cement concrete, 1:2:4 cement concrete for benching & channel, plastering with cement sand mortar 1:3 20mm thick on inside outside and all exposed surface, providing CI steps @ 300mm C/C etc.complete. - Chamber 900mm inside clear dia at bottom 525mm inside clear at top and depth not exceeding 1800mm provided with FRP cover of load bearing capacity of 40 tons and load tested as per BSEN124,IS 1726 and AASHTO M306 standards size of 600 mm dia.

Size of chamber 450 x 450mm inside clear for storm water inspection chambers depth not exceeding 800mm including FRP grating of load bearing capacity of 20 tons and load tested as per BSEN124,IS 1726 and AASHTO M306 standardssize 600 x 600mm complete in all.

Size of chamber 600 x 600mm inside clear for storm water inspection chambers depth not exceeding 1000mm including FRP grating of load bearing capacity of 20 tons and load tested as per BSEN124,IS 1726 and AASHTO M306 standardssize 600 x 600mm complete in all.

Supply, installation, testing and commissioning of cubicle type panels as specified and shown on drawing. i) Main Aluminium busbars with bar type feeder connections & all internal wiring (with FRLS wires)and connections. ii) Earthing all components,frame etc. to a common internal earth bar. iii) Painting all sheet metal works. iv) All accessories & supporting structure,base etc., with necessary fuses. parameters like KW, KVA, A, V, vii) All Load Managers to have v) Brass glands and crimping lugs for sending and receiving ends. vi) All ammeters with C.T's and voltmeter and energy meters PF, KVAR, Active & Reactive component of power, RS 485 port to have BMS compatibility as required & desired to complete the system. vii) Panel components as specified and as required with required control cabling and motor control panel viii) MS base frame and structural supports as required ix)All switch gear to have short circuit levels as specified (for MCB, consider fuse back up etc.,). x) I.P.- 52 or I.P.- 55 enclosure as specified below and nothing less than IP-52 is accepted for the enclosure which are not written with IP category. (Outdoor isolators, starter panels, panels shall be of IP55 rating) xi) All electric motors shall have efficiency as specified in Ashrae 90.1, 2004. xii) In all panels for each starter the following shall be provided with BMS connectivity for Potential free contact for A/M switch, and A/M switch itself, to Acccept PFC from BMS for start/stop, PFC for run statuts to BMS & PFC for Trip Status to BMS.) - Plumbing panel @Bsmt-03) as required, specified and shown on drg.No. SL-164-PL-TDR-ESLD-114-R0.

Supply, Installation, testing & Commissioning of Isolators with VFD in IP 57 enclosure as per technical Specifications, as shown in the drawing and as per section 5.1 mentioned above complete with all necessory accessories required to complete the job including structural supports. - Isolator starter panel with VFD Starter for 3 Phase 1.5 Kw motor with Powder coated M.S enclosure (IP57)

Supply, Installation, testing & Commissioning of Isolators with VFD in IP 57 enclosure as per technical Specifications, as shown in the drawing and as per section 5.1 mentioned above complete with all necessory accessories required to complete the job including structural supports - SITC of Control Panel for 2Nos pumps as per pump Data Sheet . All two pumps shall be provided with individual 1.5 KW variable frequency drive of suitable rating as per pump data sheet and THDi less than 10% panel should come with auto logic like dry run protection, under voltage auto tripping, NO nc contact for BMS etc.. IP65 enclosure.

Power Cabling (XLPE / PVC/FS)-Supply and laying heavy duty 1100V grade XLPE insulated sheathed & armoured FRLS cables indoor with Al./Cu conductors as specified in the specification and as shown on drgs. complete with: a) Cable clamps on walls, columns, beams, built-up trenches, cable markers etc. for indoor cables. b) Covering bricks or tiles, cable markers etc for outdoor cables. c) Earthing the glands armouring etc. Aluminium cables (XLPE cables) 3.5 C 185 sqmm

Power Cabling (XLPE / PVC/FS)-Supply and laying heavy duty 1100V grade XLPE insulated sheathed & armoured FRLS cables indoor with Al./Cu conductors as specified in the specification and as shown on drgs. complete with: a) Cable clamps on walls, columns, beams, built-up trenches, cable markers etc. for indoor cables. b) Covering bricks or tiles, cable markers etc for outdoor cables. c) Earthing the glands armouring etc. Aluminium cables (XLPE cables) - 3.5 C 120 sqmm

Power Cabling (XLPE / PVC/FS)-Supply and laying heavy duty 1100V grade XLPE insulated sheathed & armoured FRLS cables indoor with Al./Cu conductors as specified in the specification and as shown on drgs. complete with: a) Cable clamps on walls, columns, beams, built-up trenches, cable markers etc. for indoor cables. b) Covering bricks or tiles, cable markers etc for outdoor cables. c) Earthing the glands armouring etc. Aluminium cables (XLPE cables) - 3.5 C 35 sqmm

Power Cabling (XLPE / PVC/FS)-Supply and laying heavy duty 1100V grade XLPE insulated sheathed & armoured FRLS cables indoor with Al./Cu conductors as specified in the specification and as shown on drgs. complete with: a) Cable clamps on walls, columns, beams, built-up trenches, cable markers etc. for indoor cables. b) Covering bricks or tiles, cable markers etc for outdoor cables. c) Earthing the glands armouring etc. Aluminium cables (XLPE cables) - 3 C 185 sqmm

Power Cabling (XLPE / PVC/FS)-Supply and laying heavy duty 1100V grade XLPE insulated sheathed & armoured FRLS cables indoor with Al./Cu conductors as specified in the specification and as shown on drgs. complete with: a) Cable clamps on walls, columns, beams, built-up trenches, cable markers etc. for indoor cables. b) Covering bricks or tiles, cable markers etc for outdoor cables. c) Earthing the glands armouring etc. Aluminium cables (XLPE cables) - 3 C 120 sqmm

Power Cabling (XLPE / PVC/FS)-Supply and laying heavy duty 1100V grade XLPE insulated sheathed & armoured FRLS cables indoor with Al./Cu conductors as specified in the specification and as shown on drgs. complete with: a) Cable clamps on walls, columns, beams, built-up trenches, cable markers etc. for indoor cables. b) Covering bricks or tiles, cable markers etc for outdoor cables. c) Earthing the glands armouring etc. Aluminium cables (XLPE cables) - 3 C 95 sqmm

Power Cabling (XLPE / PVC/FS)-Supply and laying heavy duty 1100V grade XLPE insulated sheathed & armoured FRLS cables indoor with Al./Cu conductors as specified in the specification and as shown on drgs. complete with: a) Cable clamps on walls, columns, beams, built-up trenches, cable markers etc. for indoor cables. b) Covering bricks or tiles, cable markers etc for outdoor cables. c) Earthing the glands armouring etc. Aluminium cables (XLPE cables) - 3 C 70 sqmm

Power Cabling (XLPE / PVC/FS)-Supply and laying heavy duty 1100V grade XLPE insulated sheathed & armoured FRLS cables indoor with Al./Cu conductors as specified in the specification and as shown on drgs. complete with: a) Cable clamps on walls, columns, beams, built-up trenches, cable markers etc. for indoor cables. b) Covering bricks or tiles, cable markers etc for outdoor cables. c) Earthing the glands armouring etc. Aluminium cables (XLPE cables) - 3 C 50 sqmm

Power Cabling (XLPE / PVC/FS)-Supply and laying heavy duty 1100V grade XLPE insulated sheathed & armoured FRLS cables indoor with Al./Cu conductors as specified in the specification and as shown on drgs. complete with: a) Cable clamps on walls, columns, beams, built-up trenches, cable markers etc. for indoor cables. b) Covering bricks or tiles, cable markers etc for outdoor cables. c) Earthing the glands armouring etc. Aluminium cables (XLPE cables) - 3 C 25 sqmm

Power Cabling (XLPE / PVC/FS)-Supply and laying heavy duty 1100V grade XLPE insulated sheathed & armoured FRLS cables indoor with Al./Cu conductors as specified in the specification and as shown on drgs. complete with: a) Cable clamps on walls, columns, beams, built-up trenches, cable markers etc. for indoor cables. b) Covering bricks or tiles, cable markers etc for outdoor cables. c) Earthing the glands armouring etc. Aluminium cables (XLPE cables) - 3.5 C 25 sqmm

Power Cabling (XLPE / PVC/FS)-Supply and laying heavy duty 1100V grade XLPE insulated sheathed & armoured FRLS cables indoor with Al./Cu conductors as specified in the specification and as shown on drgs. complete with: a) Cable clamps on walls, columns, beams, built-up trenches, cable markers etc. for indoor cables. b) Covering bricks or tiles, cable markers etc for outdoor cables. c) Earthing the glands armouring etc. - CU. CABLES -4 C 25 sqmm

Power Cabling (XLPE / PVC/FS)-Supply and laying heavy duty 1100V grade XLPE insulated sheathed & armoured FRLS cables indoor with Al./Cu conductors as specified in the specification and as shown on drgs. complete with: a) Cable clamps on walls, columns, beams, built-up trenches, cable markers etc. for indoor cables. b) Covering bricks or tiles, cable markers etc for outdoor cables. c) Earthing the glands armouring etc. - CU. CABLES - 4 C 16 sqmm

Power Cabling (XLPE / PVC/FS)-Supply and laying heavy duty 1100V grade XLPE insulated sheathed & armoured FRLS cables indoor with Al./Cu conductors as specified in the specification and as shown on drgs. complete with: a) Cable clamps on walls, columns, beams, built-up trenches, cable markers etc. for indoor cables. b) Covering bricks or tiles, cable markers etc for outdoor cables. c) Earthing the glands armouring etc. - CU. CABLES - 4 C 10 sqmm

Power Cabling (XLPE / PVC/FS)-Supply and laying heavy duty 1100V grade XLPE insulated sheathed & armoured FRLS cables indoor with Al./Cu conductors as specified in the specification and as shown on drgs. complete with: a) Cable clamps on walls, columns, beams, built-up trenches, cable markers etc. for indoor cables. b) Covering bricks or tiles, cable markers etc for outdoor cables. c) Earthing the glands armouring etc. - CU. CABLES - 4 C 6 sqmm

Power Cabling (XLPE / PVC/FS)-Supply and laying heavy duty 1100V grade XLPE insulated sheathed & armoured FRLS cables indoor with Al./Cu conductors as specified in the specification and as shown on drgs. complete with: a) Cable clamps on walls, columns, beams, built-up trenches, cable markers etc. for indoor cables. b) Covering bricks or tiles, cable markers etc for outdoor cables. c) Earthing the glands armouring etc. - CU. CABLES - 4 C 4 sqmm

Power Cabling (XLPE / PVC/FS)-Supply and laying heavy duty 1100V grade XLPE insulated sheathed & armoured FRLS cables indoor with Al./Cu conductors as specified in the specification and as shown on drgs. complete with: a) Cable clamps on walls, columns, beams, built-up trenches, cable markers etc. for indoor cables. b) Covering bricks or tiles, cable markers etc for outdoor cables. c) Earthing the glands armouring etc. - CU. CABLES - 4 C 2.5 sqmm

Power Cabling (XLPE / PVC/FS)-Supply and laying heavy duty 1100V grade XLPE insulated sheathed & armoured FRLS cables indoor with Al./Cu conductors as specified in the specification and as shown on drgs. complete with: a) Cable clamps on walls, columns, beams, built-up trenches, cable markers etc. for indoor cables. b) Covering bricks or tiles, cable markers etc for outdoor cables. c) Earthing the glands armouring etc. - CU. CABLES - 3 C 16 sqmm

Power Cabling (XLPE / PVC/FS)-Supply and laying heavy duty 1100V grade XLPE insulated sheathed & armoured FRLS cables indoor with Al./Cu conductors as specified in the specification and as shown on drgs. complete with: a) Cable clamps on walls, columns, beams, built-up trenches, cable markers etc. for indoor cables. b) Covering bricks or tiles, cable markers etc for outdoor cables. c) Earthing the glands armouring etc. - CU. CABLES - 3 C 10 sqmm

Power Cabling (XLPE / PVC/FS)-Supply and laying heavy duty 1100V grade XLPE insulated sheathed & armoured FRLS cables indoor with Al./Cu conductors as specified in the specification and as shown on drgs. complete with: a) Cable clamps on walls, columns, beams, built-up trenches, cable markers etc. for indoor cables. b) Covering bricks or tiles, cable markers etc for outdoor cables. c) Earthing the glands armouring etc. - CU. CABLES - 3 C 6 sqmm

Power Cabling (XLPE / PVC/FS)-Supply and laying heavy duty 1100V grade XLPE insulated sheathed & armoured FRLS cables indoor with Al./Cu conductors as specified in the specification and as shown on drgs. complete with: a) Cable clamps on walls, columns, beams, built-up trenches, cable markers etc. for indoor cables. b) Covering bricks or tiles, cable markers etc for outdoor cables. c) Earthing the glands armouring etc. - CU. CABLES 3 C 4 sqmm

Power Cabling (XLPE / PVC/FS)-Supply and laying heavy duty 1100V grade XLPE insulated sheathed & armoured FRLS cables indoor with Al./Cu conductors as specified in the specification and as shown on drgs. complete with: a) Cable clamps on walls, columns, beams, built-up trenches, cable markers etc. for indoor cables. b) Covering bricks or tiles, cable markers etc for outdoor cables. c) Earthing the glands armouring etc. - CU. CABLES - 3 C 2.5 sqmm

SITC of 2C 1.5Sqmm 11000 PVC insulated sheathed and screened FRLS control cables with copper conductors generally as specified and same as for power cables. in required 20/25mm dia GI conduit for flow switches to Fire alarm control panel located at ground floor, with all required accessories, cable end terminations etc

SITC of 25mm dia GI conduit with all accessories, screws, spacers, clamps, z-sections etc.,

SITC of 2C 1.5Sqmm 11000 PVC insulated sheathed and screened FRLS control cables with copper conductors

Making cable end terminations including brass compression glands and crimping type copper lugs for 2C 1.5Sqmm control cables

Cable Termination FOR CABLES.-Making cable end terminations including brass compression glands and crimping type copper lugs for cable sizes mentioned below of copper or Aluminium & as specified in the specification. - 3.5 C 185 sqmm

Cable Termination FOR CABLES.-Making cable end terminations including brass compression glands and crimping type copper lugs for cable sizes mentioned below of copper or Aluminium & as specified in the specification. - 3.5 C 120 sqmm

Cable Termination FOR CABLES.-Making cable end terminations including brass compression glands and crimping type copper lugs for cable sizes mentioned below of copper or Aluminium & as specified in the specification. - 3.5 C 35 sqmm

Cable Termination FOR CABLES.-Making cable end terminations including brass compression glands and crimping type copper lugs for cable sizes mentioned below of copper or Aluminium & as specified in the specification. - 3 C 185 sqmm

Cable Termination FOR CABLES.-Making cable end terminations including brass compression glands and crimping type copper lugs for cable sizes mentioned below of copper or Aluminium & as specified in the specification. - 3 C 120 sqmm

Cable Termination FOR CABLES.-Making cable end terminations including brass compression glands and crimping type copper lugs for cable sizes mentioned below of copper or Aluminium & as specified in the specification. - 3 C 95 sqmm

Cable Termination FOR CABLES.-Making cable end terminations including brass compression glands and crimping type copper lugs for cable sizes mentioned below of copper or Aluminium & as specified in the specification. - 3 C 70 sqmm

Cable Termination FOR CABLES.-Making cable end terminations including brass compression glands and crimping type copper lugs for cable sizes mentioned below of copper or Aluminium & as specified in the specification. - 3 C 50 sqmm

Cable Termination FOR CABLES.-Making cable end terminations including brass compression glands and crimping type copper lugs for cable sizes mentioned below of copper or Aluminium & as specified in the specification. - 3 C 35 sqmm

Cable Termination FOR CABLES.-Making cable end terminations including brass compression glands and crimping type copper lugs for cable sizes mentioned below of copper or Aluminium & as specified in the specification. - 3/ 3.5 C 25 sqmm

Cable Termination FOR CABLES.-Making cable end terminations including brass compression glands and crimping type copper lugs for cable sizes mentioned below of copper or Aluminium & as specified in the specification. - 4c / 3c x 10

Cable Termination FOR CABLES.-Making cable end terminations including brass compression glands and crimping type copper lugs for cable sizes mentioned below of copper or Aluminium & as specified in the specification. - 4c / 3c x 10

Cable Termination FOR CABLES.-Making cable end terminations including brass compression glands and crimping type copper lugs for cable sizes mentioned below of copper or Aluminium & as specified in the specification. - 4c / 3c x 6

Cable Termination FOR CABLES.-Making cable end terminations including brass compression glands and crimping type copper lugs for cable sizes mentioned below of copper or Aluminium & as specified in the specification. -4c / 3c x 4

Cable Termination FOR CABLES.-Making cable end terminations including brass compression glands and crimping type copper lugs for cable sizes mentioned below of copper or Aluminium & as specified in the specification. 4c / 3c x 2.5

Cable Trays-Supply & installation of Powder coated Ladder type Powder Coated M.S. cable Tray with all its necessary accessories and supporting frames etc. - 750 mm wide single horizontal/vertical tier.

Cable Trays-Supply & installation of Powder coated Ladder type Powder Coated M.S. cable Tray with all its necessary accessories and supporting frames etc. - 600 mm wide single horizontal/vertical tier.

Cable Trays-Supply & installation of Powder coated Ladder type Powder Coated M.S. cable Tray with all its necessary accessories and supporting frames etc. - 450 mm wide Single horizontal/vertical tier.

Cable Trays-Supply & installation of Powder coated Ladder type Powder Coated M.S. cable Tray with all its necessary accessories and supporting frames etc.- 300 mm wide single horizontal/vertical tier.

Supply & installation of Al. Painted Perforated type Powder Coated M.S cable trays 50 mm in Height & 2.5mm thick with two coats of red-oxide and with necessary supporting frame members, angles, clamps etc. for Power & Control cables as specified & shown on drawings. - 50 mm wide single horizontal/vertical tier.

Supply & installation of Al. Painted Perforated type Powder Coated M.S cable trays 50 mm in Height & 2.5mm thick with two coats of red-oxide and with necessary supporting frame members, angles, clamps etc. for Power & Control cables as specified & shown on drawings. - 100 mm wide single horizontal/vertical tier.

Supply & installation of Al. Painted Perforated type Powder Coated M.S cable trays 50 mm in Height & 2.5mm thick with two coats of red-oxide and with necessary supporting frame members, angles, clamps etc. for Power & Control cables as specified & shown on drawings. - 150 mm wide single horizontal/vertical tier.

Supply & installation of Al. Painted Perforated type Powder Coated M.S cable trays 50 mm in Height & 2.5mm thick with two coats of red-oxide and with necessary supporting frame members, angles, clamps etc. for Power & Control cables as specified & shown on drawings. - 200 mm wide single horizontal/vertical tier.

Supply & installation of Al. Painted Perforated type Powder Coated M.S cable trays 50 mm in Height & 2.5mm thick with two coats of red-oxide and with necessary supporting frame members, angles, clamps etc. for Power & Control cables as specified & shown on drawings. - 300 mm wide single horizontal/vertical tier.

Supply & installation of Al. Painted Perforated type Powder Coated M.S cable trays 50 mm in Height & 2.5mm thick with two coats of red-oxide and with necessary supporting frame members, angles, clamps etc. for Power & Control cables as specified & shown on drawings. - 500 mm wide single

Earth wire/strips-Supply & laying Cu/G.I. earthing strips for interconnecting the earthing stations, panels, DB's, pumps, chillers, exhuast fans etc. in built-up trenches, on walls/ceiling, buried in ground, generally as specified & shown on drawings complete with; a) Fixing accessories. b) Corrosion protection of buried conductors with bituminous coating and covered with PVC tapes. - GI Strips, - 50 x 12 mm G.I.

Earth wire/strips-Supply & laying Cu/G.I. earthing strips for interconnecting the earthing stations, panels, DB's, pumps, chillers, exhuast fans etc. in built-up trenches, on walls/ceiling, buried in ground, generally as specified & shown on drawings complete with; a) Fixing accessories. b) Corrosion protection of buried conductors with bituminous coating and covered with PVC tapes. - GI Strips, - 50 x 10 mm G.I.

Earth wire/strips-Supply & laying Cu/G.I. earthing strips for interconnecting the earthing stations, panels, DB's, pumps, chillers, exhuast fans etc. in built-up trenches, on walls/ceiling, buried in ground, generally as specified & shown on drawings complete with; a) Fixing accessories. b) Corrosion protection of buried conductors with bituminous coating and covered with PVC tapes. - GI Strips, - 50 x 6 mm G.I.

Earth wire/strips-Supply & laying Cu/G.I. earthing strips for interconnecting the earthing stations, panels, DB's, pumps, chillers, exhuast fans etc. in built-up trenches, on walls/ceiling, buried in ground, generally as specified & shown on drawings complete with; a) Fixing accessories. b) Corrosion protection of buried conductors with bituminous coating and covered with PVC tapes. - GI Strips, - 50 x 5 mm G.I.

Earth wire/strips-Supply & laying Cu/G.I. earthing strips for interconnecting the earthing stations, panels, DB's, pumps, chillers, exhuast fans etc. in built-up trenches, on walls/ceiling, buried in ground, generally as specified & shown on drawings complete with; a) Fixing accessories. b) Corrosion protection of buried conductors with bituminous coating and covered with PVC tapes. - GI Strips, - 40 x 10 mm G.I.

Earth wire/strips-Supply & laying Cu/G.I. earthing strips for interconnecting the earthing stations, panels, DB's, pumps, chillers, exhuast fans etc. in built-up trenches, on walls/ceiling, buried in ground, generally as specified & shown on drawings complete with; a) Fixing accessories. b) Corrosion protection of buried conductors with bituminous coating and covered with PVC tapes. - GI Strips, - 40 x 5 mm G.I.

Earth wire/strips-Supply & laying Cu/G.I. earthing strips for interconnecting the earthing stations, panels, DB's, pumps, chillers, exhuast fans etc. in built-up trenches, on walls/ceiling, buried in ground, generally as specified & shown on drawings complete with; a) Fixing accessories. b) Corrosion protection of buried conductors with bituminous coating and covered with PVC tapes. - GI Strips, - 25 x 5 mm G.I.

Earth wire/strips-Supply & laying Cu/G.I. earthing strips for interconnecting the earthing stations, panels, DB's, pumps, chillers, exhuast fans etc. in built-up trenches, on walls/ceiling, buried in ground, generally as specified & shown on drawings complete with; a) Fixing accessories. b) Corrosion protection of buried conductors with bituminous coating and covered with PVC tapes. - GI Strips, - 25 x 6 mm G.I.

Earth wire/strips-Supply & laying Cu/G.I. earthing strips for interconnecting the earthing stations, panels, DB's, pumps, chillers, exhuast fans etc. in built-up trenches, on walls/ceiling, buried in ground, generally as specified & shown on drawings complete with; a) Fixing accessories. b) Corrosion protection of buried conductors with bituminous coating and covered with PVC tapes. - GI Strips, - 25 x 3 mm G.I.

Earth wire/strips-Supply & laying Cu/G.I. earthing strips for interconnecting the earthing stations, panels, DB's, pumps, chillers, exhuast fans etc. in built-up trenches, on walls/ceiling, buried in ground, generally as specified & shown on drawings complete with; a) Fixing accessories. b) Corrosion protection of buried conductors with bituminous coating and covered with PVC tapes. - GI Strips, - 20 x 3 mm G.I.

Earth wire/strips-Supply & laying Cu/G.I. earthing strips for interconnecting the earthing stations, panels, DB's, pumps, chillers, exhuast fans etc. in built-up trenches, on walls/ceiling, buried in ground, generally as specified & shown on drawings complete with; a) Fixing accessories. b) Corrosion protection of buried conductors with bituminous coating and covered with PVC tapes. - GI Strips, - 30 x 6 mm G.I.

Earth wire/strips-Supply & laying Cu/G.I. earthing strips for interconnecting the earthing stations, panels, DB's, pumps, chillers, exhuast fans etc. in built-up trenches, on walls/ceiling, buried in ground, generally as specified & shown on drawings complete with; a) Fixing accessories. b) Corrosion protection of buried conductors with bituminous coating and covered with PVC tapes. - GI Strips, - 8 SWG G.I.

Earth wire/strips-Supply & laying Cu/G.I. earthing strips for interconnecting the earthing stations, panels, DB's, pumps, chillers, exhuast fans etc. in built-up trenches, on walls/ceiling, buried in ground, generally as specified & shown on drawings complete with; a) Fixing accessories. b) Corrosion protection of buried conductors with bituminous coating and covered with PVC tapes. - GI Strips - Copper Strips, - 50 x 5 mm Cu

Earth wire/strips-Supply & laying Cu/G.I. earthing strips for interconnecting the earthing stations, panels, DB's, pumps, chillers, exhuast fans etc. in built-up trenches, on walls/ceiling, buried in ground, generally as specified & shown on drawings complete with; a) Fixing accessories. b) Corrosion protection of buried conductors with bituminous coating and covered with PVC tapes. - GI Strips - Copper Strips, - 35 x 5 mm Cu

Earth wire/strips-Supply & laying Cu/G.I. earthing strips for interconnecting the earthing stations, panels, DB's, pumps, chillers, exhuast fans etc. in built-up trenches, on walls/ceiling, buried in ground, generally as specified & shown on drawings complete with; a) Fixing accessories. b) Corrosion protection of buried conductors with bituminous coating and covered with PVC tapes. - GI Strips - Copper Strips, - 32 x 6 mm Cu

Earth wire/strips-Supply & laying Cu/G.I. earthing strips for interconnecting the earthing stations, panels, DB's, pumps, chillers, exhuast fans etc. in built-up trenches, on walls/ceiling, buried in ground, generally as specified & shown on drawings complete with; a) Fixing accessories. b) Corrosion protection of buried conductors with bituminous coating and covered with PVC tapes. - GI Strips - Copper Strips, - 25 x 5mm Cu

Earth wire/strips-Supply & laying Cu/G.I. earthing strips for interconnecting the earthing stations, panels, DB's, pumps, chillers, exhuast fans etc. in built-up trenches, on walls/ceiling, buried in ground, generally as specified & shown on drawings complete with; a) Fixing accessories. b) Corrosion protection of buried conductors with bituminous coating and covered with PVC tapes. - GI Strips - Copper Strips, - 25 x 3 mm Cu

Earth wire/strips-Supply & laying Cu/G.I. earthing strips for interconnecting the earthing stations, panels, DB's, pumps, chillers, exhuast fans etc. in built-up trenches, on walls/ceiling, buried in ground, generally as specified & shown on drawings complete with; a) Fixing accessories. b) Corrosion protection of buried conductors with bituminous coating and covered with PVC tapes. - GI Strips - Copper Strips, - 20 x 5 mm Cu

Earth wire/strips-Supply & laying Cu/G.I. earthing strips for interconnecting the earthing stations, panels, DB's, pumps, chillers, exhuast fans etc. in built-up trenches, on walls/ceiling, buried in ground, generally as specified & shown on drawings complete with; a) Fixing accessories. b) Corrosion protection of buried conductors with bituminous coating and covered with PVC tapes. - GI Strips - Copper Strips, - 15 x 5 mm Cu

Earth wire/strips-Supply & laying Cu/G.I. earthing strips for interconnecting the earthing stations, panels, DB's, pumps, chillers, exhuast fans etc. in built-up trenches, on walls/ceiling, buried in ground, generally as specified & shown on drawings complete with; a) Fixing accessories. b) Corrosion protection of buried conductors with bituminous coating and covered with PVC tapes. - GI Strips - Copper Strips, - 20 x 3 mm Cu

Earth wire/strips-Supply & laying Cu/G.I. earthing strips for interconnecting the earthing stations, panels, DB's, pumps, chillers, exhuast fans etc. in built-up trenches, on walls/ceiling, buried in ground, generally as specified & shown on drawings complete with; a) Fixing accessories. b) Corrosion protection of buried conductors with bituminous coating and covered with PVC tapes. - GI Strips - Copper Strips, - 10 x 5 mm Cu

Earth wire/strips-Supply & laying Cu/G.I. earthing strips for interconnecting the earthing stations, panels, DB's, pumps, chillers, exhuast fans etc. in built-up trenches, on walls/ceiling, buried in ground, generally as specified & shown on drawings complete with; a) Fixing accessories. b) Corrosion protection of buried conductors with bituminous coating and covered with PVC tapes. - GI Strips - Copper Strips, - 10 x 3 mm Cu

Earth wire/strips-Supply & laying Cu/G.I. earthing strips for interconnecting the earthing stations, panels, DB's, pumps, chillers, exhuast fans etc. in built-up trenches, on walls/ceiling, buried in ground, generally as specified & shown on drawings complete with; a) Fixing accessories. b) Corrosion protection of buried conductors with bituminous coating and covered with PVC tapes. - GI Strips - Copper Strips, - 12 x 3 mm Cu

Earth wire/strips-Supply & laying Cu/G.I. earthing strips for interconnecting the earthing stations, panels, DB's, pumps, chillers, exhuast fans etc. in built-up trenches, on walls/ceiling, buried in ground, generally as specified & shown on drawings complete with; a) Fixing accessories. b) Corrosion protection of buried conductors with bituminous coating and covered with PVC tapes. - GI Strips - Copper Strips, - 8 SWG Cu

Supply, installation,testing and commissioning of (Non UL Listed) fire pumps electrically driven generally as specified & shown in data sheets complete with: i) all accessories ii) Vibration mounts,flexible connections,Pressure sensor and Pressure guages, pump discharge etc. iii) Test connection excluding starter panel & foundation. iv) with valves at inlet & outlet ,Ystrainer at inlet & NRV at outlet as per inlet and outlet pipe dia. v) For Electrical panel & cabling scope of work Kindly reffer fire SLD & electrical section. - Fire Hydrant Pump as per data sheet 'FP1' (Flow 1850 lpm &72 met. Head)

Supply, installation,testing and commissioning of (Non UL Listed) fire pumps electrically driven generally as specified & shown in data sheets complete with: i) all accessories ii) Vibration mounts,flexible connections,Pressure sensor and Pressure guages, pump discharge etc. iii) Test connection excluding starter panel & foundation. iv) with valves at inlet & outlet ,Ystrainer at inlet & NRV at outlet as per inlet and outlet pipe dia. v) For Electrical panel & cabling scope of work Kindly reffer fire SLD & electrical section. - Jockey for Hydrant as per data sheet 'FP2' (Flow 180 lpm & 72 met. Head)

Supply, installation,testing and commissioning of (Non UL Listed) fire pumps electrically driven generally as specified & shown in data sheets complete with: i) all accessories ii) Vibration mounts,flexible connections,Pressure sensor and Pressure guages, pump discharge etc. iii) Test connection excluding starter panel & foundation. iv) with valves at inlet & outlet ,Ystrainer at inlet & NRV at outlet as per inlet and outlet pipe dia. v) For Electrical panel & cabling scope of work Kindly reffer fire SLD & electrical section. - Fire Hydrant Diesel Pump as per data sheet 'FP1' (Flow 1850 lpm, & 72 met. Head)

Supply, installation,testing and commissioning of (Non UL Listed) fire pumps electrically driven generally as specified & shown in data sheets complete with: i) all accessories ii) Vibration mounts,flexible connections,Pressure sensor and Pressure guages, pump discharge etc. iii) Test connection excluding starter panel & foundation. iv) with valves at inlet & outlet ,Ystrainer at inlet & NRV at outlet as per inlet and outlet pipe dia. v) For Electrical panel & cabling scope of work Kindly reffer fire SLD & electrical section. - Booster Pump for hydrant system as per data sheet 'FP3'(Flow 450 lpm, & 45 met. Head)

Supply, installation,testing and commissioning of (Non UL Listed) fire pumps electrically driven generally as specified & shown in data sheets complete with: i) all accessories ii) Vibration mounts,flexible connections,Pressure sensor and Pressure guages, pump discharge etc. iii) Test connection excluding starter panel & foundation. iv) with valves at inlet & outlet ,Ystrainer at inlet & NRV at outlet as per inlet and outlet pipe dia. v) For Electrical panel & cabling scope of work Kindly reffer fire SLD & electrical section. - pressure gauge panel comprising of: i) Pressure gauges-2Nos ii) Pressure switches-2Nos

Providing & fixing Fire hose reel box suitable to accommodate 2 nos of landing valves of15 m long canavs hoses, (Approx 0.75 m (high) x 0.6 m (wide) x 0.3 m (deep) ).

Providing & fixing gun metal fire hydrant Single landing valve with 80 / 100 mm N.B. flanged inlet, brass spindle controlled 63 mm dia female instantaneous outlet including orifice plate as required and flanged tapping from wet riser complete as required. Note:- Orifice Plate outlet pressure should not excced more than 3.5 kg/cm²

Providing & fixing swinging type First Aid hose reel drum with 30 mts long and 20 mm dia heavy duty rubber water hosewith with 5 mm outlet gunmetal / SS nozzle with shut off valve(I.S. 884-1969) complete with GI socket for tap-off, drum and brackets for fixing on wall complete as required.

Providing and fixing 63 mm dia canvas hose of 15 m length including SS male and female instantaneous type coupling approved by fire authority, machine wound with copper wire complete in all respects.Hose shall conform to IS 636 Type II and coupling to IS 903 -1975 ( ISI marked)

Providing and Fixing 63 mm dia instantaneous pattern branch short SS pipe, 20 mm dia SS nozzle suitable for inter connection to SS hose pipe coupling complete as required. ( ISI marked)

Providing and fixing standard firemans axe with heavy rubber handle.

External hydrant standpost 80 mm Dia. Type generally as specified & shown in drgs. (Single Headed)

External hose cabinets as specified for wall mounting or free standing complete with Galvanised mild steel or fiber glass cabinet.

External hose cabinets as specified for wall mounting or free standing complete with 2 Nos. of controlled percolation or rubber lined reinforced canvas hoses. Confirming to IS:14933-2001

Supply, installation, testing & commissioning of Fire brigade breaching connection with two twin headed 63mm valves, stand post and 150 mm GI 'C' class pipe for mounting the stand post etc. with 150mm non- return valve and 150mm sluice valve etc. as specified & shown in drawings. (Fire connection to Tank)

Supply, installation, testing & commissioning of Siamese connection with 2 Nos 63 mm outlets,stand post and 150 mm GI 'C' Class pipe for mounting the stand post etc. with 150mm non- return valve and 150mm sluice valve etc. complete as shown in drg. (Fire connection to External Hydrant Ring )

Supply, laying, testing & commissioning of external piping (Underground) generally as specified using G.I. `C' class of IS 1239 or 3589 complete with:(pipe for sprinkler & fire hydrant system). i) All pipes and all heavy grade fittings conforming to IS 1538,PN 16 together with flanges, gaskets, bolts,nuts etc. ii) Covered with Pypkote. Iii) all steel supports/clamps etc., required - 150 n.b

Supply, laying, testing & commissioning of external piping (Underground) generally as specified using G.I. `C' class of IS 1239 or 3589 complete with:(pipe for sprinkler & fire hydrant system). i) All pipes and all heavy grade fittings conforming to IS 1538,PN 16 together with flanges, gaskets, bolts,nuts etc. ii) Covered with Pypkote. Iii) all steel supports/clamps etc., required - 100 n.b

Supply, laying, testing & commissioning of external piping (Underground) generally as specified using G.I. `C' class of IS 1239 or 3589 complete with:(pipe for sprinkler & fire hydrant system). i) All pipes and all heavy grade fittings conforming to IS 1538,PN 16 together with flanges, gaskets, bolts,nuts etc. ii) Covered with Pypkote. Iii) all steel supports/clamps etc., required - 80 n.b

Excavation of soft murram as per general profiles/pre-preparation of surface and back filling as required.

Excavation of hard murram as per general profiles/pre-preparation of surface and back filling as required.

Making 1:2:4 cement concrete supports and thrust blocks generally as required

Supply & installation of C.I. butterfly valves of PN 16 with mating flanges generally as specified complete for - 150 n.b

Supply & installation of C.I. butterfly valves of PN 16 with mating flanges generally as specified complete for - 100 n.b

Supply & installation of C.I. butterfly valves of PN 16 with mating flanges generally as specified complete for - 80n.b.

Providing brick masonry valve chamber generally as shown in drawings complete with cast iron surface box as per standards. - 750 x 750mm clear (900mm depth)

Providing brick masonry valve chamber generally as shown in drawings complete with cast iron surface box as per standards. - 1000 x 1000mm clear (over 1200mm depth)

Supply & laying and commisioning of heavy duty GI piping ( GI 'C' Class of IS 1239 part-I) complete with all pipe fittings of PN 16, pipe supports, clamps, painting,structural supports etc.as per specification. (Internal Hydrant system,Internal sprinkler system and all the pump rooms piping ) - 250 n.b

Supply & laying and commisioning of heavy duty GI piping ( GI 'C' Class of IS 1239 part-I) complete with all pipe fittings of PN 16, pipe supports, clamps, painting,structural supports etc.as per specification. (Internal Hydrant system,Internal sprinkler system and all the pump rooms piping ) - 200 n.b

Supply & laying and commisioning of heavy duty GI piping ( GI 'C' Class of IS 1239 part-I) complete with all pipe fittings of PN 16, pipe supports, clamps, painting,structural supports etc.as per specification. (Internal Hydrant system,Internal sprinkler system and all the pump rooms piping ) - 150 n.b

Supply & laying and commisioning of heavy duty GI piping ( GI 'C' Class of IS 1239 part-I) complete with all pipe fittings of PN 16, pipe supports, clamps, painting,structural supports etc.as per specification. (Internal Hydrant system,Internal sprinkler system and all the pump rooms piping ) - 125 n.b

Supply & laying and commisioning of heavy duty GI piping ( GI 'C' Class of IS 1239 part-I) complete with all pipe fittings of PN 16, pipe supports, clamps, painting,structural supports etc.as per specification. (Internal Hydrant system,Internal sprinkler system and all the pump rooms piping ) - 100 n.b

Supply & laying and commisioning of heavy duty GI piping ( GI 'C' Class of IS 1239 part-I) complete with all pipe fittings of PN 16, pipe supports, clamps, painting,structural supports etc.as per specification. (Internal Hydrant system,Internal sprinkler system and all the pump rooms piping ) - 80 n.b

Supply & laying and commisioning of heavy duty GI piping ( GI 'C' Class of IS 1239 part-I) complete with all pipe fittings of PN 16, pipe supports, clamps, painting,structural supports etc.as per specification. (Internal Hydrant system,Internal sprinkler system and all the pump rooms piping ) - 65 n.b

Supply & laying and commisioning of heavy duty GI piping ( GI 'C' Class of IS 1239 part-I) complete with all pipe fittings of PN 16, pipe supports, clamps, painting,structural supports etc.as per specification. (Internal Hydrant system,Internal sprinkler system and all the pump rooms piping ) - 50 n.b

Supply & laying and commisioning of heavy duty GI piping ( GI 'C' Class of IS 1239 part-I) complete with all pipe fittings of PN 16, pipe supports, clamps, painting,structural supports etc.as per specification. (Internal Hydrant system,Internal sprinkler system and all the pump rooms piping ) - 40 n.b

Supply & laying and commisioning of heavy duty GI piping ( GI 'C' Class of IS 1239 part-I) complete with all pipe fittings of PN 16, pipe supports, clamps, painting,structural supports etc.as per specification. (Internal Hydrant system,Internal sprinkler system and all the pump rooms piping ) - 32 n.b

Supply & laying and commisioning of heavy duty GI piping ( GI 'C' Class of IS 1239 part-I) complete with all pipe fittings of PN 16, pipe supports, clamps, painting,structural supports etc.as per specification. (Internal Hydrant system,Internal sprinkler system and all the pump rooms piping ) - 25 n.b

Supply, installation, testing, commissioning of forged brass Ball Valves complete with all fittings, pipe supports, clamps, painting etc.as per specification. (Pressure class PN 16.) - 20 n.b

Supply, installation, testing, commissioning of forged brass Ball Valves complete with all fittings, pipe supports, clamps, painting etc.as per specification. (Pressure class PN 16.) - 25 n.b

Supply, installation, testing, commissioning of forged brass Ball Valves complete with all fittings, pipe supports, clamps, painting etc.as per specification. (Pressure class PN 16.) - 32 n.b

Supply, installation, testing, commissioning of forged brass Ball Valves complete with all fittings, pipe supports, clamps, painting etc.as per specification. (Pressure class PN 16.) - 40 n.b

Supply, installation, testing, commissioning of C.I. Butterfly valves complete with all fittings, pipe supports, clamps, painting etc.as per specification.(Pressure class PN 16.) - 65 n.b

Supply, installation, testing, commissioning of C.I. Butterfly valves complete with all fittings, pipe supports, clamps, painting etc.as per specification.(Pressure class PN 16.) - 80 n.b

Supply, installation, testing, commissioning of C.I. Butterfly valves complete with all fittings, pipe supports, clamps, painting etc.as per specification.(Pressure class PN 16.) - 100 n.b

Supply, installation, testing, commissioning of C.I. Butterfly valves complete with all fittings, pipe supports, clamps, painting etc.as per specification.(Pressure class PN 16.) - 150 n.b

Supply, installation, testing, commissioning of C.I. Butterfly valves complete with all fittings, pipe supports, clamps, painting etc.as per specification.(Pressure class PN 16.) - 200 n.b

Supply, installation, testing, commissioning of C.I. Butterfly valves complete with all fittings, pipe supports, clamps, painting etc.as per specification.(Pressure class PN 16.) - 250 n.b

Supply, installation, testing, commissioning of C.I. Butterfly valves with supervisory tamper switch icluding all necessary circuit control wiring upto the auxilliary signal device (bell or horn), complete with all fittings, pipe supports, clamps, painting etc.as per specification.The circuit provides one switch for the fire alarm system (optional) and a second switch for an indicating light or audible alarm at the valve location.(Pressure class PN 16.) - 65 n.b

Supply, installation, testing, commissioning of C.I. Butterfly valves with supervisory tamper switch icluding all necessary circuit control wiring upto the auxilliary signal device (bell or horn), complete with all fittings, pipe supports, clamps, painting etc.as per specification.The circuit provides one switch for the fire alarm system (optional) and a second switch for an indicating light or audible alarm at the valve location.(Pressure class PN 16.) - 80 n.b

Supply, installation, testing, commissioning of C.I. Butterfly valves with supervisory tamper switch icluding all necessary circuit control wiring upto the auxilliary signal device (bell or horn), complete with all fittings, pipe supports, clamps, painting etc.as per specification.The circuit provides one switch for the fire alarm system (optional) and a second switch for an indicating light or audible alarm at the valve location.(Pressure class PN 16.) - 100 n.b

Supply, installation, testing, commissioning of C.I. Butterfly valves with supervisory tamper switch icluding all necessary circuit control wiring upto the auxilliary signal device (bell or horn), complete with all fittings, pipe supports, clamps, painting etc.as per specification.The circuit provides one switch for the fire alarm system (optional) and a second switch for an indicating light or audible alarm at the valve location.(Pressure class PN 16.) - 150 n.b

Supply, installation, testing, commissioning of best Indian make IS stamped C.I. non return valve complete with all fittings, pipe supports, clamps, painting etc.as per specification.(Pressure class PN 16.) - 65 mm

Supply, installation, testing, commissioning of best Indian make IS stamped C.I. non return valve complete with all fittings, pipe supports, clamps, painting etc.as per specification.(Pressure class PN 16.) - 100mm

Supply, installation, testing, commissioning of best Indian make IS stamped C.I. non return valve complete with all fittings, pipe supports, clamps, painting etc.as per specification.(Pressure class PN 16.) - 150 mm

Supply, installation, testing, commissioning of best Indian make IS stamped C.I. non return valve complete with all fittings, pipe supports, clamps, painting etc.as per specification.(Pressure class PN 16.) - 200 mm

Supply, installation, testing, commissioning of best Indian make IS stamped C.I. non return valve complete with all fittings, pipe supports, clamps, painting etc.as per specification.(Pressure class PN 16.) - 250 mm

Supply, installation testing and commissioning of double flanged C.I Y strainers with C.I body and brass strainer.( PN 10 ) - 65 mm

Supply, installation testing and commissioning of double flanged C.I Y strainers with C.I body and brass strainer.( PN 10 ) - 80 mm

Supply, installation testing and commissioning of double flanged C.I Y strainers with C.I body and brass strainer.( PN 10 ) - 100 mm

Supply, installation testing and commissioning of double flanged C.I Y strainers with C.I body and brass strainer.( PN 10 ) - 150 mm

Supply, installation testing and commissioning of double flanged C.I Y strainers with C.I body and brass strainer.( PN 10 ) - 200 mm

Supply,installation,testing and commissioning of installation valve assembly of PN 16 rating (UL approved)as specified and shown on drawings and complete with: i) Mains gate valve. ii) Installation valve with retard chamber & motor gong. iii) Pressure gauges with gate valve. iv) Test connection with gate valve v) All inter connected galvanised steel, piping, strainers,valves, drain piping etc. - 200mm dia

Supply,installation,testing and commissioning of installation valve assembly of PN 16 rating (UL approved)as specified and shown on drawings and complete with: i) Mains gate valve. ii) Installation valve with retard chamber & motor gong. iii) Pressure gauges with gate valve. iv) Test connection with gate valve v) All inter connected galvanised steel, piping, strainers,valves, drain piping etc. - 150mm dia

Supply, fabrication, installation, testing & commissioning of Pressure / Air vessels 300mm diameter and 1000mm high with butterfly valved inlet/outlet valved drain, valved air inlet etc. complete.

Supply, Installation, testing and commissioning automatic air vents with 32 dia isolation ball valves of PN 10 rating.

Supply,installation,testing and commissioning of flow switches complete with : i) flow switch & Press indicator,sight glass ii) Control wiring till control panel(lumpsum) iii) Orifice plate with flange to maintain a pressure of 2.2ksc at the tap-off as required. iv) Drain assembly includes drain valve, sight flow indicator as shown in drawing and complete with all necessary accessories.(PN 10) - 150 dia

Supply,installation,testing and commissioning of flow switches complete with : i) flow switch & Press indicator,sight glass ii) Control wiring till control panel(lumpsum) iii) Orifice plate with flange to maintain a pressure of 2.2ksc at the tap-off as required. iv) Drain assembly includes drain valve, sight flow indicator as shown in drawing and complete with all necessary accessories.(PN 10) - 100 dia

Supply,installation,testing and commissioning of flow switches complete with : i) flow switch & Press indicator,sight glass ii) Control wiring till control panel(lumpsum) iii) Orifice plate with flange to maintain a pressure of 2.2ksc at the tap-off as required. iv) Drain assembly includes drain valve, sight flow indicator as shown in drawing and complete with all necessary accessories.(PN 10) - 80 dia

Supply,installation,testing and commissioning of flow switches complete with : i) flow switch & Press indicator,sight glass ii) Control wiring till control panel(lumpsum) iii) Orifice plate with flange to maintain a pressure of 2.2ksc at the tap-off as required. iv) Drain assembly includes drain valve, sight flow indicator as shown in drawing and complete with all necessary accessories.(PN 10) - 65 dia

SITC of forged brass ball valves of required pressure rating for sprinkler/hydrant drain as per standards complete with all required accessories.(PN 10) - 25 mm dia

SITC of forged brass ball valves of required pressure rating for sprinkler/hydrant drain as per standards complete with all required accessories.(PN 10) - 32 mm dia

SITC of forged brass ball valves of required pressure rating for sprinkler/hydrant drain as per standards complete with all required accessories.(PN 10) - 40 mm dia

SITC of forged brass ball valves of required pressure rating for sprinkler/hydrant drain as per standards complete with all required accessories.(PN 10) - 50 mm dia

Supply,installation,testing and commissioning of sprinklers generally as specified complete with escutcheon plates: Pendent type 15/10mm 68oC Sprinklers( Quick Response type)

SITC of UL listed & local CFO approved sprinkler flexible connection with all necessary supports & joining accessories i) 1.5m length

SITC of UL listed & local CFO approved sprinkler flexible connection with all necessary supports & joining accessories ii)1m length

Preparation of Isometric drawings, Hydraulic calculations(with standard and authorised piping software) and doing all necessary re-engineering to complete the entire fire fighting works and doing all necessary integration.

Supplying, installing and commissioning of ABC Powder 4 Kg Fire Extinguisher containing Mono Ammonium Phosphate Powder 50, Stored Pressure Type, Pressure Gauge, fitted with discharge hose, wall mounting bracket etc., Discharge Time less than 15 Secs, Controllable discharge mechanism, Range minimum 4 Meters, applicable on Class A,B,C and electrically started Fire, A Rating- 8A, B Rating 34B, Can Construction : Deep drawn & Co2 Mig welded, Valve Construction : Forging & Machining, Internal Coating of Can : Epoxy Powder coating, External Coating of Can : Epoxy Polyster Powder coating, Sheet metal thickness : 1.60MM, ISI approved as per IS:15683:2006 - ABC type -4 kg.

Supplying, installing and commissioning of ABC Powder 4 Kg Fire Extinguisher containing Mono Ammonium Phosphate Powder 50, Stored Pressure Type, Pressure Gauge, fitted with discharge hose, wall mounting bracket etc., Discharge Time less than 15 Secs, Controllable discharge mechanism, Range minimum 4 Meters, applicable on Class A,B,C and electrically started Fire, A Rating- 8A, B Rating 34B, Can Construction : Deep drawn & Co2 Mig welded, Valve Construction : Forging & Machining, Internal Coating of Can : Epoxy Powder coating, External Coating of Can : Epoxy Polyster Powder coating, Sheet metal thickness : 1.60MM, ISI approved as per IS:15683:2006 - ABC type -6 kg.

Supplying, installing and commissioning of ABC Powder 4 Kg Fire Extinguisher containing Mono Ammonium Phosphate Powder 50, Stored Pressure Type, Pressure Gauge, fitted with discharge hose, wall mounting bracket etc., Discharge Time less than 15 Secs, Controllable discharge mechanism, Range minimum 4 Meters, applicable on Class A,B,C and electrically started Fire, A Rating- 8A, B Rating 34B, Can Construction : Deep drawn & Co2 Mig welded, Valve Construction : Forging & Machining, Internal Coating of Can : Epoxy Powder coating, External Coating of Can : Epoxy Polyster Powder coating, Sheet metal thickness : 1.60MM, ISI approved as per IS:15683:2006 - ABC clean agent type modular Automatic fire extinguisher – 15 kg (Ceiling mounted)

Obtaining all the necessary / required statutory approvals from the competenat authority, necessary doccumentation and drawing preparation and also have the equipment and installation inspected and got approved.

Supply, installation, testing and commissioning of cubicle type panels as specified and shown on drawing. i) Main Aluminium busbars with bar type feeder connections & all internal wiring (with FRLS wires)and connections. ii) Earthing all components,frame etc. to a common internal earth bar. iii) Painting all sheet metal works. iv) All accessories & supporting structure,base etc., with necessary fuses. parameters like KW, KVA, A, V, vii) All Load Managers to have v) Brass glands and crimping lugs for sending and receiving ends. vi) All ammeters with C.T's and voltmeter and energy meters PF, KVAR, Active & Reactive component of power, RS 485 port to have BMS compatibility as required & desired to complete the system. vii) Panel components as specified and as required with required control cabling and motor control panel viii) MS base frame and structural supports as required ix)All switch gear to have short circuit levels as specified (for MCB, consider fuse back up etc.,). x) I.P.- 52 or I.P.- 55 enclosure as specified below and nothing less than IP-52 is accepted for the enclosure which are not written with IP category. (Outdoor isolators, starter panels, panels shall be of IP55 rating) xi) All electric motors shall have efficiency as specified in Ashrae 90.1, 2004. xii) In all panels for each starter the following shall be provided with BMS connectivity for Potential free contact for A/M switch, and A/M switch itself, to Acccept PFC from BMS for start/stop, PFC for run statuts to BMS & PFC for Trip Status to BMS.) - FIRE PUMP PANEL-1( @Bsmt-03) as required, specified and shown on drg.No. SL-046-FF-ELE-1002

Supply, installation, testing and commissioning of cubicle type panels as specified and shown on drawing. i) Main Aluminium busbars with bar type feeder connections & all internal wiring (with FRLS wires)and connections. ii) Earthing all components,frame etc. to a common internal earth bar. iii) Painting all sheet metal works. iv) All accessories & supporting structure,base etc., with necessary fuses. parameters like KW, KVA, A, V, vii) All Load Managers to have v) Brass glands and crimping lugs for sending and receiving ends. vi) All ammeters with C.T's and voltmeter and energy meters PF, KVAR, Active & Reactive component of power, RS 485 port to have BMS compatibility as required & desired to complete the system. vii) Panel components as specified and as required with required control cabling and motor control panel viii) MS base frame and structural supports as required ix)All switch gear to have short circuit levels as specified (for MCB, consider fuse back up etc.,). x) I.P.- 52 or I.P.- 55 enclosure as specified below and nothing less than IP-52 is accepted for the enclosure which are not written with IP category. (Outdoor isolators, starter panels, panels shall be of IP55 rating) xi) All electric motors shall have efficiency as specified in Ashrae 90.1, 2004. xii) In all panels for each starter the following shall be provided with BMS connectivity for Potential free contact for A/M switch, and A/M switch itself, to Acccept PFC from BMS for start/stop, PFC for run statuts to BMS & PFC for Trip Status to BMS.) - Supply, Installation, testing & Commissioning of MPCB Isolators with star delta in IP 57 enclosure as per technical Specifications, as shown in the drawing and as per section 5.1 mentioned above complete with all necessory accessories required to complete the job including structural supports. MPCB isolator starter panel with Star Delta Starter for 3 Phase 7.5 Kw motor with Powder coated M.S enclosure (IP57)

Supply, installation, testing and commissioning of cubicle type panels as specified and shown on drawing. i) Main Aluminium busbars with bar type feeder connections & all internal wiring (with FRLS wires)and connections. ii) Earthing all components,frame etc. to a common internal earth bar. iii) Painting all sheet metal works. iv) All accessories & supporting structure,base etc., with necessary fuses. parameters like KW, KVA, A, V, vii) All Load Managers to have v) Brass glands and crimping lugs for sending and receiving ends. vi) All ammeters with C.T's and voltmeter and energy meters PF, KVAR, Active & Reactive component of power, RS 485 port to have BMS compatibility as required & desired to complete the system. vii) Panel components as specified and as required with required control cabling and motor control panel viii) MS base frame and structural supports as required ix)All switch gear to have short circuit levels as specified (for MCB, consider fuse back up etc.,). x) I.P.- 52 or I.P.- 55 enclosure as specified below and nothing less than IP-52 is accepted for the enclosure which are not written with IP category. (Outdoor isolators, starter panels, panels shall be of IP55 rating) xi) All electric motors shall have efficiency as specified in Ashrae 90.1, 2004. xii) In all panels for each starter the following shall be provided with BMS connectivity for Potential free contact for A/M switch, and A/M switch itself, to Acccept PFC from BMS for start/stop, PFC for run statuts to BMS & PFC for Trip Status to BMS.) - Supply, Installation, testing & Commissioning of MPCB Isolators with star delta in IP 57 enclosure as per technical Specifications, as shown in the drawing and as per section 5.1 mentioned above complete with all necessory accessories required to complete the job including structural supports. MPCB isolator starter panel with Star Delta Starter for 3 Phase 11 Kw motor with Powder coated M.S enclosure

Power Cabling (XLPE / PVC/FS)-Supply and laying heavy duty 1100V grade XLPE insulated sheathed & armoured FRLS cables indoor with Al./Cu conductors as specified in the specification and as shown on drgs. complete with: a) Cable clamps on walls, columns, beams, built-up trenches, cable markers etc. for indoor cables. b) Covering bricks or tiles, cable markers etc for outdoor cables. c) Earthing the glands armouring etc. Aluminium cables (XLPE cables) - 3.5 C 185 sqmm

Power Cabling (XLPE / PVC/FS)-Supply and laying heavy duty 1100V grade XLPE insulated sheathed & armoured FRLS cables indoor with Al./Cu conductors as specified in the specification and as shown on drgs. complete with: a) Cable clamps on walls, columns, beams, built-up trenches, cable markers etc. for indoor cables. b) Covering bricks or tiles, cable markers etc for outdoor cables. c) Earthing the glands armouring etc. Aluminium cables (XLPE cables) - 3.5 C 120 sqmm

Power Cabling (XLPE / PVC/FS)-Supply and laying heavy duty 1100V grade XLPE insulated sheathed & armoured FRLS cables indoor with Al./Cu conductors as specified in the specification and as shown on drgs. complete with: a) Cable clamps on walls, columns, beams, built-up trenches, cable markers etc. for indoor cables. b) Covering bricks or tiles, cable markers etc for outdoor cables. c) Earthing the glands armouring etc. Aluminium cables (XLPE cables) 3.5 C 35 sqmm

Power Cabling (XLPE / PVC/FS)-Supply and laying heavy duty 1100V grade XLPE insulated sheathed & armoured FRLS cables indoor with Al./Cu conductors as specified in the specification and as shown on drgs. complete with: a) Cable clamps on walls, columns, beams, built-up trenches, cable markers etc. for indoor cables. b) Covering bricks or tiles, cable markers etc for outdoor cables. c) Earthing the glands armouring etc. Aluminium cables (XLPE cables) - 3 C 185 sqmm

Power Cabling (XLPE / PVC/FS)-Supply and laying heavy duty 1100V grade XLPE insulated sheathed & armoured FRLS cables indoor with Al./Cu conductors as specified in the specification and as shown on drgs. complete with: a) Cable clamps on walls, columns, beams, built-up trenches, cable markers etc. for indoor cables. b) Covering bricks or tiles, cable markers etc for outdoor cables. c) Earthing the glands armouring etc. Aluminium cables (XLPE cables) - 3 C 120 sqmm

Power Cabling (XLPE / PVC/FS)-Supply and laying heavy duty 1100V grade XLPE insulated sheathed & armoured FRLS cables indoor with Al./Cu conductors as specified in the specification and as shown on drgs. complete with: a) Cable clamps on walls, columns, beams, built-up trenches, cable markers etc. for indoor cables. b) Covering bricks or tiles, cable markers etc for outdoor cables. c) Earthing the glands armouring etc. Aluminium cables (XLPE cables) - 3 C 95 sqmm

Power Cabling (XLPE / PVC/FS)-Supply and laying heavy duty 1100V grade XLPE insulated sheathed & armoured FRLS cables indoor with Al./Cu conductors as specified in the specification and as shown on drgs. complete with: a) Cable clamps on walls, columns, beams, built-up trenches, cable markers etc. for indoor cables. b) Covering bricks or tiles, cable markers etc for outdoor cables. c) Earthing the glands armouring etc. Aluminium cables (XLPE cables) - 3 C 70 sqmm

Power Cabling (XLPE / PVC/FS)-Supply and laying heavy duty 1100V grade XLPE insulated sheathed & armoured FRLS cables indoor with Al./Cu conductors as specified in the specification and as shown on drgs. complete with: a) Cable clamps on walls, columns, beams, built-up trenches, cable markers etc. for indoor cables. b) Covering bricks or tiles, cable markers etc for outdoor cables. c) Earthing the glands armouring etc. Aluminium cables (XLPE cables) - 3 C 50 sqmm

Power Cabling (XLPE / PVC/FS)-Supply and laying heavy duty 1100V grade XLPE insulated sheathed & armoured FRLS cables indoor with Al./Cu conductors as specified in the specification and as shown on drgs. complete with: a) Cable clamps on walls, columns, beams, built-up trenches, cable markers etc. for indoor cables. b) Covering bricks or tiles, cable markers etc for outdoor cables. c) Earthing the glands armouring etc. Aluminium cables (XLPE cables) - 3 C 25 sqmm

Power Cabling (XLPE / PVC/FS)-Supply and laying heavy duty 1100V grade XLPE insulated sheathed & armoured FRLS cables indoor with Al./Cu conductors as specified in the specification and as shown on drgs. complete with: a) Cable clamps on walls, columns, beams, built-up trenches, cable markers etc. for indoor cables. b) Covering bricks or tiles, cable markers etc for outdoor cables. c) Earthing the glands armouring etc. Aluminium cables (XLPE cables) - 3.5 C 25 sqmm

Power Cabling (XLPE / PVC/FS)-Supply and laying heavy duty 1100V grade XLPE insulated sheathed & armoured FRLS cables indoor with Al./Cu conductors as specified in the specification and as shown on drgs. complete with: a) Cable clamps on walls, columns, beams, built-up trenches, cable markers etc. for indoor cables. b) Covering bricks or tiles, cable markers etc for outdoor cables. c) Earthing the glands armouring etc. CU. CABLES - 4 C 25 sqmm

Power Cabling (XLPE / PVC/FS)-Supply and laying heavy duty 1100V grade XLPE insulated sheathed & armoured FRLS cables indoor with Al./Cu conductors as specified in the specification and as shown on drgs. complete with: a) Cable clamps on walls, columns, beams, built-up trenches, cable markers etc. for indoor cables. b) Covering bricks or tiles, cable markers etc for outdoor cables. c) Earthing the glands armouring etc. CU. CABLES - 4 C 16 sqmm

Power Cabling (XLPE / PVC/FS)-Supply and laying heavy duty 1100V grade XLPE insulated sheathed & armoured FRLS cables indoor with Al./Cu conductors as specified in the specification and as shown on drgs. complete with: a) Cable clamps on walls, columns, beams, built-up trenches, cable markers etc. for indoor cables. b) Covering bricks or tiles, cable markers etc for outdoor cables. c) Earthing the glands armouring etc. CU. CABLES - 4 C 10 sqmm

Power Cabling (XLPE / PVC/FS)-Supply and laying heavy duty 1100V grade XLPE insulated sheathed & armoured FRLS cables indoor with Al./Cu conductors as specified in the specification and as shown on drgs. complete with: a) Cable clamps on walls, columns, beams, built-up trenches, cable markers etc. for indoor cables. b) Covering bricks or tiles, cable markers etc for outdoor cables. c) Earthing the glands armouring etc. CU. CABLES - 4 C 6 sqmm

Power Cabling (XLPE / PVC/FS)-Supply and laying heavy duty 1100V grade XLPE insulated sheathed & armoured FRLS cables indoor with Al./Cu conductors as specified in the specification and as shown on drgs. complete with: a) Cable clamps on walls, columns, beams, built-up trenches, cable markers etc. for indoor cables. b) Covering bricks or tiles, cable markers etc for outdoor cables. c) Earthing the glands armouring etc. CU. CABLES - 4 C 4 sqmm

Power Cabling (XLPE / PVC/FS)-Supply and laying heavy duty 1100V grade XLPE insulated sheathed & armoured FRLS cables indoor with Al./Cu conductors as specified in the specification and as shown on drgs. complete with: a) Cable clamps on walls, columns, beams, built-up trenches, cable markers etc. for indoor cables. b) Covering bricks or tiles, cable markers etc for outdoor cables. c) Earthing the glands armouring etc. CU. CABLES - 4 C 2.5 sqmm

Power Cabling (XLPE / PVC/FS)-Supply and laying heavy duty 1100V grade XLPE insulated sheathed & armoured FRLS cables indoor with Al./Cu conductors as specified in the specification and as shown on drgs. complete with: a) Cable clamps on walls, columns, beams, built-up trenches, cable markers etc. for indoor cables. b) Covering bricks or tiles, cable markers etc for outdoor cables. c) Earthing the glands armouring etc. CU. CABLES - 3 C 16 sqmm

Power Cabling (XLPE / PVC/FS)-Supply and laying heavy duty 1100V grade XLPE insulated sheathed & armoured FRLS cables indoor with Al./Cu conductors as specified in the specification and as shown on drgs. complete with: a) Cable clamps on walls, columns, beams, built-up trenches, cable markers etc. for indoor cables. b) Covering bricks or tiles, cable markers etc for outdoor cables. c) Earthing the glands armouring etc. CU. CABLES - 3 C 10 sqmm

Power Cabling (XLPE / PVC/FS)-Supply and laying heavy duty 1100V grade XLPE insulated sheathed & armoured FRLS cables indoor with Al./Cu conductors as specified in the specification and as shown on drgs. complete with: a) Cable clamps on walls, columns, beams, built-up trenches, cable markers etc. for indoor cables. b) Covering bricks or tiles, cable markers etc for outdoor cables. c) Earthing the glands armouring etc. CU. CABLES - 3 C 6 sqmm

Power Cabling (XLPE / PVC/FS)-Supply and laying heavy duty 1100V grade XLPE insulated sheathed & armoured FRLS cables indoor with Al./Cu conductors as specified in the specification and as shown on drgs. complete with: a) Cable clamps on walls, columns, beams, built-up trenches, cable markers etc. for indoor cables. b) Covering bricks or tiles, cable markers etc for outdoor cables. c) Earthing the glands armouring etc. CU. CABLES - 3 C 4 sqmm

Power Cabling (XLPE / PVC/FS)-Supply and laying heavy duty 1100V grade XLPE insulated sheathed & armoured FRLS cables indoor with Al./Cu conductors as specified in the specification and as shown on drgs. complete with: a) Cable clamps on walls, columns, beams, built-up trenches, cable markers etc. for indoor cables. b) Covering bricks or tiles, cable markers etc for outdoor cables. c) Earthing the glands armouring etc. CU. CABLES - 3 C 2.5 sqmm

SITC of 2C 1.5Sqmm 11000 PVC insulated sheathed and screened FRLS control cables with copper conductors generally as specified and same as for power cables. in required 20/25mm dia GI conduit for flow switches to Fire alarm control panel located at ground floor, with all required accessories, cable end terminations etc

SITC of 25mm dia GI conduit with all accessories, screws, spacers, clamps, z-sections etc.,

SITC of 2C 1.5Sqmm 11000 PVC insulated sheathed and screened FRLS control cables with copper conductors

Making cable end terminations including brass compression glands and crimping type copper lugs for 2C 1.5Sqmm control cables

Cable Termination FOR CABLES.-Making cable end terminations including brass compression glands and crimping type copper lugs for cable sizes mentioned below of copper or Aluminium & as specified in the specification. - 3.5 C 185 sqmm

Cable Termination FOR CABLES.-Making cable end terminations including brass compression glands and crimping type copper lugs for cable sizes mentioned below of copper or Aluminium & as specified in the specification. - 3.5 C 120 sqmm

Cable Termination FOR CABLES.-Making cable end terminations including brass compression glands and crimping type copper lugs for cable sizes mentioned below of copper or Aluminium & as specified in the specification. - 3.5 C 35 sqmm

Cable Termination FOR CABLES.-Making cable end terminations including brass compression glands and crimping type copper lugs for cable sizes mentioned below of copper or Aluminium & as specified in the specification. 3 C 185 sqmm

Cable Termination FOR CABLES.-Making cable end terminations including brass compression glands and crimping type copper lugs for cable sizes mentioned below of copper or Aluminium & as specified in the specification. 3 C 120 sqmm

Cable Termination FOR CABLES.-Making cable end terminations including brass compression glands and crimping type copper lugs for cable sizes mentioned below of copper or Aluminium & as specified in the specification. - 3 C 95 sqmm

Cable Termination FOR CABLES.-Making cable end terminations including brass compression glands and crimping type copper lugs for cable sizes mentioned below of copper or Aluminium & as specified in the specification. - 3 C 70 sqmm

Cable Termination FOR CABLES.-Making cable end terminations including brass compression glands and crimping type copper lugs for cable sizes mentioned below of copper or Aluminium & as specified in the specification. - 3 C 50 sqmm

Cable Termination FOR CABLES.-Making cable end terminations including brass compression glands and crimping type copper lugs for cable sizes mentioned below of copper or Aluminium & as specified in the specification. - 3 C 35 sqmm

Cable Termination FOR CABLES.-Making cable end terminations including brass compression glands and crimping type copper lugs for cable sizes mentioned below of copper or Aluminium & as specified in the specification. - 3/ 3.5 C 25 sqmm

Cable Termination FOR CABLES.-Making cable end terminations including brass compression glands and crimping type copper lugs for cable sizes mentioned below of copper or Aluminium & as specified in the specification. - 4c / 3c x 16

Cable Termination FOR CABLES.-Making cable end terminations including brass compression glands and crimping type copper lugs for cable sizes mentioned below of copper or Aluminium & as specified in the specification. - 4c / 3c x 1

Cable Termination FOR CABLES.-Making cable end terminations including brass compression glands and crimping type copper lugs for cable sizes mentioned below of copper or Aluminium & as specified in the specification. - 4c / 3c x 6

Cable Termination FOR CABLES.-Making cable end terminations including brass compression glands and crimping type copper lugs for cable sizes mentioned below of copper or Aluminium & as specified in the specification. - 4c / 3c x 4

Cable Termination FOR CABLES.-Making cable end terminations including brass compression glands and crimping type copper lugs for cable sizes mentioned below of copper or Aluminium & as specified in the specification. - 4c / 3c x 2.5

Cable Trays-Supply & installation of Powder coated Ladder type Powder Coated M.S. cable Tray with all its necessary accessories and supporting frames etc. - 750 mm wide single horizontal/vertical tier.

Cable Trays-Supply & installation of Powder coated Ladder type Powder Coated M.S. cable Tray with all its necessary accessories and supporting frames etc. - 600 mm wide single horizontal/vertical tier.

Cable Trays-Supply & installation of Powder coated Ladder type Powder Coated M.S. cable Tray with all its necessary accessories and supporting frames etc. - 450 mm wide Single horizontal/vertical tier.

Cable Trays-Supply & installation of Powder coated Ladder type Powder Coated M.S. cable Tray with all its necessary accessories and supporting frames etc. - 300 mm wide single horizontal/vertical tier.

Supply & installation of Al. Painted Perforated type Powder Coated M.S cable trays 50 mm in Height & 2.5mm thick with two coats of red-oxide and with necessary supporting frame members, angles, clamps etc. for Power & Control cables as specified & shown on drawings. - 50 mm wide single horizontal/vertical tier.

Supply & installation of Al. Painted Perforated type Powder Coated M.S cable trays 50 mm in Height & 2.5mm thick with two coats of red-oxide and with necessary supporting frame members, angles, clamps etc. for Power & Control cables as specified & shown on drawings. - 100 mm wide single horizontal/vertical tier.

Supply & installation of Al. Painted Perforated type Powder Coated M.S cable trays 50 mm in Height & 2.5mm thick with two coats of red-oxide and with necessary supporting frame members, angles, clamps etc. for Power & Control cables as specified & shown on drawings. - 150 mm wide single horizontal/vertical tier.

Supply & installation of Al. Painted Perforated type Powder Coated M.S cable trays 50 mm in Height & 2.5mm thick with two coats of red-oxide and with necessary supporting frame members, angles, clamps etc. for Power & Control cables as specified & shown on drawings. - 200 mm wide single horizontal/vertical tier.

Supply & installation of Al. Painted Perforated type Powder Coated M.S cable trays 50 mm in Height & 2.5mm thick with two coats of red-oxide and with necessary supporting frame members, angles, clamps etc. for Power & Control cables as specified & shown on drawings. - 300 mm wide single horizontal/vertical tier.

Supply & installation of Al. Painted Perforated type Powder Coated M.S cable trays 50 mm in Height & 2.5mm thick with two coats of red-oxide and with necessary supporting frame members, angles, clamps etc. for Power & Control cables as specified & shown on drawings. - 500 mm wide single horizontal/vertical tier.

Supply & installation of Al. Painted Perforated type Powder Coated M.S cable trays 50 mm in Height & 2.5mm thick with two coats of red-oxide and with necessary supporting frame members, angles, clamps etc. for Power & Control cables as specified & shown on drawings. - 500 mm wide double horizontal/vertical tier.

Supply & installation of Al. Painted Perforated type Powder Coated M.S cable trays 50 mm in Height & 2.5mm thick with two coats of red-oxide and with necessary supporting frame members, angles, clamps etc. for Power & Control cables as specified & shown on drawings. - 750 mm wide single horizontal/vertical tier.

Supply & installation of Al. Painted Perforated type Powder Coated M.S cable trays 50 mm in Height & 2.5mm thick with two coats of red-oxide and with necessary supporting frame members, angles, clamps etc. for Power & Control cables as specified & shown on drawings. - 750 mm wide double horizontal/vertical tier.

Earth wire/strips-Supply & laying Cu/G.I. earthing strips for interconnecting the earthing stations, panels, DB's, pumps, chillers, exhuast fans etc. in built-up trenches, on walls/ceiling, buried in ground, generally as specified & shown on drawings complete with; a) Fixing accessories. b) Corrosion protection of buried conductors with bituminous coating and covered with PVC tapes. - GI Strips, - 50 x 12 mm G.I.

Earth wire/strips-Supply & laying Cu/G.I. earthing strips for interconnecting the earthing stations, panels, DB's, pumps, chillers, exhuast fans etc. in built-up trenches, on walls/ceiling, buried in ground, generally as specified & shown on drawings complete with; a) Fixing accessories. b) Corrosion protection of buried conductors with bituminous coating and covered with PVC tapes. - GI Strips, - 50 x 10 mm G.I.

Earth wire/strips-Supply & laying Cu/G.I. earthing strips for interconnecting the earthing stations, panels, DB's, pumps, chillers, exhuast fans etc. in built-up trenches, on walls/ceiling, buried in ground, generally as specified & shown on drawings complete with; a) Fixing accessories. b) Corrosion protection of buried conductors with bituminous coating and covered with PVC tapes. - GI Strips, - 50 x 6 mm G.I.

Earth wire/strips-Supply & laying Cu/G.I. earthing strips for interconnecting the earthing stations, panels, DB's, pumps, chillers, exhuast fans etc. in built-up trenches, on walls/ceiling, buried in ground, generally as specified & shown on drawings complete with; a) Fixing accessories. b) Corrosion protection of buried conductors with bituminous coating and covered with PVC tapes. - GI Strips, - 50 x 5 mm G.I.

Earth wire/strips-Supply & laying Cu/G.I. earthing strips for interconnecting the earthing stations, panels, DB's, pumps, chillers, exhuast fans etc. in built-up trenches, on walls/ceiling, buried in ground, generally as specified & shown on drawings complete with; a) Fixing accessories. b) Corrosion protection of buried conductors with bituminous coating and covered with PVC tapes. - GI Strips, - 40 x 10 mm G.I.

Earth wire/strips-Supply & laying Cu/G.I. earthing strips for interconnecting the earthing stations, panels, DB's, pumps, chillers, exhuast fans etc. in built-up trenches, on walls/ceiling, buried in ground, generally as specified & shown on drawings complete with; a) Fixing accessories. b) Corrosion protection of buried conductors with bituminous coating and covered with PVC tapes. - GI Strips, - 40 x 5 mm G.I.

Earth wire/strips-Supply & laying Cu/G.I. earthing strips for interconnecting the earthing stations, panels, DB's, pumps, chillers, exhuast fans etc. in built-up trenches, on walls/ceiling, buried in ground, generally as specified & shown on drawings complete with; a) Fixing accessories. b) Corrosion protection of buried conductors with bituminous coating and covered with PVC tapes. - GI Strips, - 25 x 5 mm G.I.

Earth wire/strips-Supply & laying Cu/G.I. earthing strips for interconnecting the earthing stations, panels, DB's, pumps, chillers, exhuast fans etc. in built-up trenches, on walls/ceiling, buried in ground, generally as specified & shown on drawings complete with; a) Fixing accessories. b) Corrosion protection of buried conductors with bituminous coating and covered with PVC tapes. - GI Strips, - 25 x 6 mm G.I.

Earth wire/strips-Supply & laying Cu/G.I. earthing strips for interconnecting the earthing stations, panels, DB's, pumps, chillers, exhuast fans etc. in built-up trenches, on walls/ceiling, buried in ground, generally as specified & shown on drawings complete with; a) Fixing accessories. b) Corrosion protection of buried conductors with bituminous coating and covered with PVC tapes. - GI Strips, - 25 x 3 mm G.I.

Earth wire/strips-Supply & laying Cu/G.I. earthing strips for interconnecting the earthing stations, panels, DB's, pumps, chillers, exhuast fans etc. in built-up trenches, on walls/ceiling, buried in ground, generally as specified & shown on drawings complete with; a) Fixing accessories. b) Corrosion protection of buried conductors with bituminous coating and covered with PVC tapes. - GI Strips, - 20 x 3 mm G.I.

Earth wire/strips-Supply & laying Cu/G.I. earthing strips for interconnecting the earthing stations, panels, DB's, pumps, chillers, exhuast fans etc. in built-up trenches, on walls/ceiling, buried in ground, generally as specified & shown on drawings complete with; a) Fixing accessories. b) Corrosion protection of buried conductors with bituminous coating and covered with PVC tapes. - GI Strips, - 30 x 6 mm G.I.

Earth wire/strips-Supply & laying Cu/G.I. earthing strips for interconnecting the earthing stations, panels, DB's, pumps, chillers, exhuast fans etc. in built-up trenches, on walls/ceiling, buried in ground, generally as specified & shown on drawings complete with; a) Fixing accessories. b) Corrosion protection of buried conductors with bituminous coating and covered with PVC tapes. - GI Strips, - 8 SWG G.I.

Earth wire/strips-Supply & laying Cu/G.I. earthing strips for interconnecting the earthing stations, panels, DB's, pumps, chillers, exhuast fans etc. in built-up trenches, on walls/ceiling, buried in ground, generally as specified & shown on drawings complete with; a) Fixing accessories. b) Corrosion protection of buried conductors with bituminous coating and covered with PVC tapes - Copper Strips, - 50 x 5 mm Cu

Earth wire/strips-Supply & laying Cu/G.I. earthing strips for interconnecting the earthing stations, panels, DB's, pumps, chillers, exhuast fans etc. in built-up trenches, on walls/ceiling, buried in ground, generally as specified & shown on drawings complete with; a) Fixing accessories. b) Corrosion protection of buried conductors with bituminous coating and covered with PVC tapes - Copper Strips, - 35 x 5 mm Cu

Earth wire/strips-Supply & laying Cu/G.I. earthing strips for interconnecting the earthing stations, panels, DB's, pumps, chillers, exhuast fans etc. in built-up trenches, on walls/ceiling, buried in ground, generally as specified & shown on drawings complete with; a) Fixing accessories. b) Corrosion protection of buried conductors with bituminous coating and covered with PVC tapes - Copper Strips, - 32 x 6 mm Cu

Earth wire/strips-Supply & laying Cu/G.I. earthing strips for interconnecting the earthing stations, panels, DB's, pumps, chillers, exhuast fans etc. in built-up trenches, on walls/ceiling, buried in ground, generally as specified & shown on drawings complete with; a) Fixing accessories. b) Corrosion protection of buried conductors with bituminous coating and covered with PVC tapes - Copper Strips, - 25 x 5mm Cu

Earth wire/strips-Supply & laying Cu/G.I. earthing strips for interconnecting the earthing stations, panels, DB's, pumps, chillers, exhuast fans etc. in built-up trenches, on walls/ceiling, buried in ground, generally as specified & shown on drawings complete with; a) Fixing accessories. b) Corrosion protection of buried conductors with bituminous coating and covered with PVC tapes - Copper Strips, - 25 x 3 mm Cu

Earth wire/strips-Supply & laying Cu/G.I. earthing strips for interconnecting the earthing stations, panels, DB's, pumps, chillers, exhuast fans etc. in built-up trenches, on walls/ceiling, buried in ground, generally as specified & shown on drawings complete with; a) Fixing accessories. b) Corrosion protection of buried conductors with bituminous coating and covered with PVC tapes - Copper Strips, - 20 x 5 mm Cu

Earth wire/strips-Supply & laying Cu/G.I. earthing strips for interconnecting the earthing stations, panels, DB's, pumps, chillers, exhuast fans etc. in built-up trenches, on walls/ceiling, buried in ground, generally as specified & shown on drawings complete with; a) Fixing accessories. b) Corrosion protection of buried conductors with bituminous coating and covered with PVC tapes - Copper Strips, - 15 x 5 mm Cu

Earth wire/strips-Supply & laying Cu/G.I. earthing strips for interconnecting the earthing stations, panels, DB's, pumps, chillers, exhuast fans etc. in built-up trenches, on walls/ceiling, buried in ground, generally as specified & shown on drawings complete with; a) Fixing accessories. b) Corrosion protection of buried conductors with bituminous coating and covered with PVC tapes - Copper Strips, - 20 x 3 mm Cu

Earth wire/strips-Supply & laying Cu/G.I. earthing strips for interconnecting the earthing stations, panels, DB's, pumps, chillers, exhuast fans etc. in built-up trenches, on walls/ceiling, buried in ground, generally as specified & shown on drawings complete with; a) Fixing accessories. b) Corrosion protection of buried conductors with bituminous coating and covered with PVC tapes - Copper Strips, - 10 x 5 mm Cu

Earth wire/strips-Supply & laying Cu/G.I. earthing strips for interconnecting the earthing stations, panels, DB's, pumps, chillers, exhuast fans etc. in built-up trenches, on walls/ceiling, buried in ground, generally as specified & shown on drawings complete with; a) Fixing accessories. b) Corrosion protection of buried conductors with bituminous coating and covered with PVC tapes - Copper Strips, - 10 x 3 mm Cu

Earth wire/strips-Supply & laying Cu/G.I. earthing strips for interconnecting the earthing stations, panels, DB's, pumps, chillers, exhuast fans etc. in built-up trenches, on walls/ceiling, buried in ground, generally as specified & shown on drawings complete with; a) Fixing accessories. b) Corrosion protection of buried conductors with bituminous coating and covered with PVC tapes - Copper Strips, - 12 x 3 mm Cu

Earth wire/strips-Supply & laying Cu/G.I. earthing strips for interconnecting the earthing stations, panels, DB's, pumps, chillers, exhuast fans etc. in built-up trenches, on walls/ceiling, buried in ground, generally as specified & shown on drawings complete with; a) Fixing accessories. b) Corrosion protection of buried conductors with bituminous coating and covered with PVC tapes - Copper Strips, - 8 SWG Cu

Harshal Buildcon LLP

SHUBHSHREE ENGINEERING AND CONSTRUCTION PRIVATE LIMITED

SRICO PROJECTS PVT LTD

S.S.SATHE