SPECIAL REPAIR REPLACEMENT OF DOORS WITH PVC DOOR MISC BR

Amount

Taking down cement or cement lime plaster on brick walls incl racking out joints hacking for key scrubbing down with water etc and removing the debries outside the MOD land complete all as specified and as directed by Engr -in - Charge.

M&L for rendering CM (1:6) 15 mm thick on other than fair faces of brick work or concrete surfaces etc including finished even and smooth without using extra cement up to four storey height bldg complete all as specified and directed by Engr In Charge.

M & L for rendering 10mm thick on ceiling in cement mortar 1:3 finished fair and even smooth without using extra cement complete all as specified and directed by Engr In Charge.

M&L for preparation of newly plastered or unplastered surface and applying two coats of distemper oil emulsion on walls over a coat of primer incl 3mm thick wall care putty on walls complete all as specified and directed by Engr-In-Charge.

M&L for prepration of old plastered or unplastered surfaces of walls and applying two coat of approved shade of oil emulsion distemper with 3mm thick elastomeric wall care putty on walls, including repairing of pot holes and cracks with putty, take it plaster where it required complete all as specified and directed by Engr-in-Charge.

M&L for preparation on old plastered or unplatered surfaces of walls and applying two coat of exterior Apex/weather coat over a coat of primer any tint (colour as approved by GE) over putty including preparation of surface of wall, band/chajja/balcony up to four storey height building complete all as specified and dircted by Engineer in charge.

M&L preparation of new plastered or unplastered surface and applying three coats of white wash on ceiling upto four stories complete and all as specified and directed by engr-in -charge.

Taking down Chowkats or frames with shutters (without taking off shutters from the frame) area exc 1.5 sqm and not n.exc 4.0 sqm (including make good with CM 1:4 and hold fast) complete all as specified and directed by Engr In Charge.

All as per item No 08 above but not exc 1.5 Sqm .

Providing and fixing factory made PVC white colour sliding window three track made of extruded profile with wall thickness of 2.3mm (+/- 0.2mm). Window profile with hollow section with multi chamber, frame(88mmx52mm). sash (42mmx67mm). sliding mesh sase (42mmx567mm) sliding inlock (One vertical length in between two shutters) (45.5mmx28mm)Glazing bead (24.5mmx16mm) will be mitered cut and fusion welded to all corners & required wiremesh cloths, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware EPDM gasket + -0.2 mm thick galvanised steel frame (28mmx21.5mrn) sliding sash (30mmx18mm) 'sliding mesh sase (26mmx10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fastners. Hardware: [ touch lock of zinc alloyed (while powder coated) Corner strikers: Cyilnder. steelless steel wire cloths 0.36 mm nominal dia of wireand average dia of wire and average of widht of apreature 1.4mm and required accessories andglass) . The unit rate quoated by contractor excludes cost of glass and includes all and includes all other connected accessories and making good with which is required in PCC/RCC/plaster. Net opening will be measured for payment purpose (A) Area exc. 2.00 sqm each complete all as specificed and directed.

S&F aluminium powder coated frame any colour (minimum thickness of powder coating 50 micron) for doors, windows, partician, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed by Engineer-in-Charge.

S&F for powder coated aluminium doors shutters,( thickness of powder coating not less than 50 micron) alumonium section incl necessary joining cleats, glazing clips, rubber neoprene packing , handles 2 Nos in each door , hinges, anodised aluminium snap beading screws etc. complete all aspecified and directed by engr-In-Charge.

S&F aluminium powder coated (minimum thickness of powder coating 50 micron) as in window and ventilator shutters, sliding type three track, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber packing, anodised aluminum snap beading screws etc complete all as specified and as directed by Engr-In-Charge.

S&F in repair aluminium deco grills confirming to DG-104 grade all as specified and directed by Engr-In-Charge.

S & F in repair aluminium extruded section door closer hydraulically operated designation No-03, universal type, suitable for door shutters of 851 to 1000mm width and of weight of 61 to 80 Kg complete all as specified and directed by Engr In Charge.

S & F in repair 140mm long floor door stopper of Almn alloy body and tongue with hard drawn steel spring complete all as specified and directed by Engr In Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed.complete all as specified and directed by Engr In Charge.

M&L for Glazed ceramic coloured tiles in vertical surface 300X 450X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match incl back plaster 10 mm thick in cm 1:4 complete all as specified and directed by Engr In Charge.

M&L vitrified Ceramic light shade tiles 9 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match flooring( in any pattern) and jointed with neat cement slurry over 15 mm thick cement screed in CM 1:6 and pointed with coloured cement matching with surfaces of tiles as in floor complete all as specified and as directed by Engr-In-Charge.

All as per item No 21above but as on vertical surface of wall such as skirting/dado including 10mm thick cement plaster (1:4) as in backing coat of tiles complete all as specified and as directed

M & L for 75 mm thick PCC 1:3:6 type C2 as in Plinth Protection using 40 mm stone aggregate including making joints & filling with sand bitumen mastic as per instructions complete all as specified and directed by Engr In Charge.

S&F Modular partition workstation with 45mm thick with per-laminated top of 25mm thick as per color approved with metal powder coated legs, . Workstation having glass/fabric/white board prating on the top of the table, with three mobile pedestal, keyboard and CPU trolley. Overall size for per seat 1200x600x1200mm.(single seaters) as approved by GE.

M &L for PVC profile for wall panelling colour / shade as approved size 250mm wide, 08 mm over all thick with 1 mm wall thickness fixed with screw to mild steel square ( size 20mmx 20mmx 1mm thick) tubler frame work including one coat of red oxide primer, fixed to walls and including dismentling complete all as specified and directed by Engr-in-Charge.

M&L for PVC profile corner beading L/T type for wall panelling, colour/shade matching with wall panelling complete all as specified and as directed

Material and labour for false ceilings using GI snap grid system with roll-formed out of hot dip galvanised steel caping (powder coated) main runner 38 x 24 mm , cross Tee 29 x 24 mm and wall angle 24 x 24 mm members suspended with 4mm dia GI wire, carry maximum load up to 8.10 Kg/Sqm with 4mm thick designer ceiling board , pre painted Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions size 595 x 595mmx 4mm thick any texture (Lake and Hill, oceaniccascade or Electra) as approved by GE all as per specified, any height including dismantling complete all as specified and as directed by Engr-In-Charge.

M&L Machine pre polished cut kota stone slab 20 mm(+-2mm) thick in tread of steps, and similar over cement screed 20 mm thick in cm 1;4 base laid and jointed with grey slurry mixed with pigment to match the slab including rubbing and polishing as per and dismantling complete all as specified and directed by Engr In Charge.

All as per item No 28 above but riser on stair case, skirting on walls etc incl the surface with . jointed with grey slurry mixed with pigment to match the slab with incl back plaster 10 mm thick in cm 1:4 including rubbing and polishing as per complete all as specified and directed by Engr In Charge.

Demolition of brick work or stone/boulder masonry built in cement mortar complete all as specified and directed by Engr In Charge.

M&L for brick work with subclass 'B' bricks, straight or curved on plan exc 6 M mean radius built in CM 1:6 complete all as specified and directed by Engr In Charge.

M&L for Brickwork with sub- class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed by Engr In Charge.

M&L rendering for 15mm thick in cement mortar 1:4 on other than fair faces of brick work or concrete surfaces finished even and smooth with using extra cement up to fourth stories complete all as specified and directed by Engr In Charge.

Material & Labour for prepration of new plastered surfaces of walls and applying exterior two or more coats of APEX/WEATHER over 3mm putty including priming coat of exterior primer applied complete all as specified and directed by Engr-in-Charge.

S & F in repair stainless steel railing/grill/chain pattern and designas approved and confirming to SS 304 including with post holl PCC or other necessary fittings complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws including dismantling of asbastos cement (corrugated or semi corrugated) sheeting in roof covering as specified and directed by Engr-in-charge.

M & L for PCC (1:3:6) type C-2 ( using 40mm crushed stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

S&F steel/work in tubular truses, purlins, rafters, struts, vertical members and similar work including special shape washers complete using ERW or induction butt welded tubes conforming to IS-1161-1979, grade St-240, Mild Steel plates complete all as specified and directed by Engr-in-charge.

M&L for preparation of new steel surfaces of any description, not other wise described, over 10 cm width or girth and applying two coats synthetic enamel paint over a coats of red oxide primer as specified and directed by Engr-in-charge.

M & L for 75 mm thick cement concrete 1:3:6 type C-2, using 40 mm graded stone aggregate as in plinth protection laid to slop of 1:12, finished surface even and fair without using extra cement with and including all necessary form work to divide the area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 6 mm wide joints through out the thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight) complete all as specified and directed by Engr-In-Charge.

M&L for Brick work with subclass B bricks, staright or curved on plan exc 6.00 mtr mean redius, biult in 1:4 cement mortar complete all as specified and as directed by Engr-In-Charge.

M/L two coats of exterior appex paint (weather coat) incl prepartion of surfaces of new plastered surfaces of wall all as specified and directed.

deepankar trading co.

M/S MG GROUP

DEV CONSTRUCTION

VIJAY KUMAR GUPTA