REPAIR/ REPLACEMENT OF UNSV SPARES FOR DG SETS, OVERHAULING OF DG SETS, AMF PANELS AND OTHER CONNECTED MISC, E/M WORKS AT BASE HOSPITAL UNDER GE (EM) BHDC-10

Amount

Repairs/ servicing to 200 KVA DG set of Make Greaves (AT Covid area) with and including replacement of worn out spares and drain out engine oil from the sump, cleaning with kerosene oil and filling up with new engine oil of recommended grade & quality and testing for smooth running at rated speed Testing and commissioning complete all as per manufacturer’s instructions, as specified and as directed. Note: Spare pars to be repaired/replaced, shall be measured separately under Item Nos 1.01 to 1.07 here-in-after.

Cleaning and de-scaling of Radiator complete all as specified and as directed.

S&F Kit fuel filter and ring complete all as specified and as directed.

S&F Element Lub oil filter complete all as specified and as directed.

S&F Kit Super BYP, Filter Element complete all as specified and as directed.

S&F Seal 'O' Ring complete all as specified and as directed.

S&F Kit Air Cleaner Element complete all as specified and as directed.

S&F Connecting hose pipe complete all as specified and as directed.

S&F in replacement Oil pressure gauge for 320KVA/ 200 KVA/166 KVA/ 100 KVA/ 62.5 KVA DG set complete all as specified and as directed.

S&F in replacement Solenoid switch for 320KVA/ 200 KVA/166 KVA/ 100 KVA/ 62.5 KVA DG set complete all as specified and as directed.

S& F in replacement Battery lead with clamp for 320KVA/ 200 KVA/166 KVA/ 100 KVA/ 62.5 KVA DG set complete all as specified and as directed.

S&F in replacement Fan belt for 320KVA/ 200 KVA/166 KVA/ 100 KVA/ 62.5 KVA DG set complete all as specified and as directed.

S&F in replacement Fuel gauge suitable for 320KVA/ 200 KVA, DG set complete all as specified and as directed.

S&F in replacement Fuel gauge suitable for 100 KVA/ 40 KVA DG set complete all as specified and as directed.

S&F in replacement AVR for 1 Phase/3 Phase suitable for 320KVA/ 200 KVA/ 100 KVA DG set complete all as specified and as directed.

S&F in replacement 'V' Belt suitable for Diesel Engine, 200 KVA capacity of Make Kirlosker/Greaves/Cummins complete all as specified and as directed.

S&F in replacement 'V' Belt suitable for Diesel Engine, 320 KVA capacity of Make Kirlosker/Greaves/Cummins complete all as specified and as directed.

S&F in replacement 'V' Belt suitable for Diesel Engine, 100/40 KVA capacity of Make Kirlosker/Greaves/Cummins complete all as specified and as directed.

M&L servicing of self starter 12/24 Volts, DC from DG set including dismantling and replacing solenoid field coil complete all as specified and as directed.

M&L in replacement turbo kit of DG set 320/200 KVA capacity Make Greaves complete all as specified and as directed.

M&L in replacement turbo kit of DG set 100/40 KVA capacity Make Kirlosker complete all as specified and as directed.

M&L for rewinding of alternator field coil with super enamelled copper winding wire insulated complete of suitable size of copper wire of 320 KVA to 200 KVA Capacity DG set of Make Cummins/Kirlosker/Greaves complete all as specified and as directed.

M&L for rewinding of alternator field coil with super enamelled copper winding wire insulated complete of suitable size of copper wire of 100 KVA to 40 KVA Capacity DG set of Make Cummins/Kirlosker/Greaves complete all as specified and as directed.

S&F in replacement alternator bearing suitable for 320/200 KVA DG set of Make Cummins/Kirlosker/Greaves complete all as specified and as directed.

S&F in replacement alternator bearing suitable for 100/40 KVA DG set of Make Cummins/Kirlosker/Greaves complete all as specified and as directed.

S&F in repair Engine start relay, 12/24 V, DC, for Gen set 3 cranks on & off 0-30 sec each stable complete all as specified and as directed.

M&L for repair/overhauling of starter IC, replacement of carbon brushes, bearing, bushes, rewinding of armature and field etc and varnishing of 12/24V capacity complete all as specified and as directed.

M&L for calibration of FIP of DG set, 320 KVA Capacity, Make Greaves complete all as specified and as directed.

M&L for calibration of FIP of DG set, 200 KVA Capacity, Make Kirlosker complete all as specified and as directed.

M&L for calibration of FIP of DG set, 100/ 40KVA Capacity, Make Kirlosker complete all as specified and as directed.

S&F in repair DG set gasket set including head gasket complete all as specified and as directed.

S&F in repair 12/24 V, DC stop solenoid for DG set complete all as specified and as directed.

S&F in repair 12/24 V, DC line solenoid for DG set complete all as specified and as directed.

S&F in repair DG set control wiring of existing gauge complete all as specified and as directed.

Supply fabricated and fixing in repair Heavy Duty Aluminium Self support Folding Stool Type Ladder of 10 feet height, with the top aluminium platform of size 400mmX300mm, and the Ladder shall be Aluminium Alloy, light in weight, Fire Proof, Rust Proof, fitted with solid, non slippery Rubber shoes, side plug and Cap, safety Locks etc and Sides : Aluminium 'C' shape sections of size 66x31.7mmX3mm as per IS:733-1983 temper T-06, Steps : Aluminium 63mm Flat step 2 sides as per IS: 733-1983 temper T-06, step to step distance 12 inch and load bearing capacity of 150 Kg, suitable for fixing on four pole structure complete as specified and as directed. Make- SK ladders Model No.- SKL-108 or equivalent model of Euro/ Patel/ Godrej

Cutting/trimming of tree branches around street light fitting up to 5 metre distance at all sides and disposal complete all as specified and as directed.

S&F in replacement distribution board (DB), double door (CRCA sheet), dust and vermin proof, SPN 8 way, with 200 Amps rated copper bus bar, neutral bar, earth bar, IP 43 protection, 250 Volts, flush to wall complete all as specified and as directed.

S&F in replacement MCB, 40 to 63 Amp capacity, Single Pole & Neutral, 240 Volts, 'C' curve, 10 KA, IP 20 complete all as specified and as directed.

S&F in replacement for MCB, 63Amps capacity, Triple Pole & Neutral, 415 Volts, 'C' curve, 10 KA, IP 20 complete all as specified and as directed.

S&F in replacement MCB, 5 to 30 Amp, Single Pole, 240 Volts, 'B' curve, 10 KA, IP 20 complete all as specified and as directed.

S&F in repairs weather proof, twin core, copper multistranded conductor of size 2.5 Sqmm, PVC Insulated, PVC sheathed cable, 1100 V grade, as in service wire conductor for looping box including testing & commissioning complete all as specified and as directed.

S&F in repair 4 Sqmm, 1100 Volts grade, twin core, heavy duty cable, PVC insulated, multi stranded, aluminium conductor, (flat or circular), served with inner sheathing of PVC tape and over all PVC sheathed for service connection suspended by insulating hangers not more then 01 Metre apart including 4mm dia suspension wire including taking down old cable complete all as specified and as directed.

All as per item No 35.00 here in before but 6 Sqmm cable complete all as specified and as directed.

All as per item No 35.00 here in before but 10 Sqmm cable complete all as specified and as directed.

S&F in repair LED flood light fitting, 50 Watt, RGB, with auto sequence mode capacity, with IP 56 protection, PDC aluminium housing, Clear toughened glass, Suitable high efficient secondary lens, LM80 certified LED maximum Lumen Maintenance 50000 Hrs, control gear isolated electronic CC driver, linear LED with Red, Green & Blue colour, changing 240 V, 50 HZ, including necessary fixing brackets and connected accessories for adjustable Wall or Surface mounting including connecting to Electric supply complete all as specified and as directed. Make:- Helonix, Cat Part No :- HLFLD-ML22-50-RGB or equivalent Model of Makes Mentioned in PS. Note: Quoted rates shall also deemed to be inclusive of Fabrication & fixing of suitable size Iron Frame for Flood light.

S&F in repair LED flood light fitting, 100 Watt, RGB, with auto sequence mode capacity, with IP 56 protection, PDC aluminium housing, Clear toughened glass, Suitable high efficient secondary lens, LM80 certified LED maximum Lumen Maintenance 50000 Hrs, control gear isolated electronic CC driver linear LED with Red, Green & Blue colour, changing 240 V, 50 HZ, including necessary fixing brackets and connected accessories for adjustable Wall or Surface mounting including connecting to Electric supply complete all as specified and as directed. Make :- Helonix, Cat Part No :- HLFLD-ML22-100-RGB or equivalent Model of Makes Mentioned in PS. Note: Quoted rates shall also deemed to be inclusive of Fabrication & fixing of suitable size Iron Frame for Flood light.

S&F in repair LED flood light fitting, 150 Watt, RGB, with auto sequence mode capacity, with IP 56 protection, PDC aluminium housing, Clear toughened glass, Suitable high efficient secondary lens, LM80 certified LED maximum Lumen Maintenance 50000 Hrs, control gear isolated electronic CC driver linear LED with Red, Green & Blue colour, changing 240 V, 50 HZ, including necessary fixing brackets and connected accessories for adjustable Wall or Surface mounting including connecting to Electric supply complete all as specified and as directed. Make :- Helonix, Cat Part No:- HLFLD-ML22-150-RGB or equivalent Model of Makes Mentioned in PS. Note: Quoted rates shall also deemed to be inclusive of Fabrication & fixing of suitable size Iron Frame for Flood light.

M&L Earthing complete with galvanised Iron earth plate electrode 600x600x6mm thick, burried directly in ground (earth pit not less than 2.25mtr deep below GL) with top edge of the plate not less than 1.5 metre below normal ground level, surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15cm all round the plate with using 32X6 mm GI earth strip electrode welded and revetted to earth plate up to a distance of 7.5 metre long, GI earth strip encased in and including 40mm bore GI light grade pipe, with 20mm bore GI pipe light grade as water pipe from earth chamber to upper edge of earth plate, MS funnel with wire mesh fixed on water pipe including excavation earth work, Provn of PCC pit in PCC 1:2:4 type B-1 chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1 duly reinforced with MS bars 8mm dia @ 150 mm centre to centre, both ways complete with lifting handle all as shown in electrical plate No 3 of SSR of part-I complete all as specified and as directed.

M&L in repair pipe earthing (PIP) comprising of GI 50mm bore pipe, wall thickness of pipe 4.85 mm (Medium grade), 3.00 Metre length, terminal size 40x6mm & internal strip 25x4mm with one bag of BFC (50 Kg) as per IS 3043-1987, tubing filled with jelly earthing compound, duly inserted in soil, boring of 100mm bore filled with back filled compound including fibre chamber cover 1x1 feet, openable type, including testing of earthing complete all as specified and as directed. Note: On testing after completion, if the earth resistance < 1 Ohms is not obtain, earthing shall be rejuvenated at no extra cost till the desired earth resistance is obtained.

M&L in repair Conventional perforated pipe earthing, comprising of GI 50mm bore pipe, wall thickness of pipe 4.85 mm (Medium grade), 3.00 Metre length, terminal size 40x6mm & internal strip 25x4mm, with 10 kg salt and 20 Kg Charcoal, Funnel, reducer, Polplastic Pit Cover fibre chamber, including fibre chamber cover 1x1 feet, openable type, including testing of earthing complete all as specified and as directed. Note: On testing after completion, if the earth resistance < 1 Ohms is not obtain, earthing shall be rejuvenated at no extra cost till the desired earth resistance is obtained.

S&F in repair 25 x 4 mm GI strip with epoxy insulators and fixing screws etc for earth continuity conductors to test point terminal including taking down old strip complete all as specified and as directed.

Supply, fixing and connecting in repair single core, PVC Insulated, PVC sheathed cable, 1100 Volt grade, copper multistranded conductor of size 1.5 Sqmm, as in service wire conductor for AMF Panel, CT wiring, control wiring of LT Panels complete including testing, commissioning complete all as specified and as directed.

Supply, fixing and connecting in repair single core, PVC Insulated, PVC sheathed cable, 1100 Volt grade, copper multistranded conductor of size 2.5 Sqmm, as in service wire conductor for AMF Panel, CT wiring, control wiring of LT Panels complete including testing, commissioning complete all as specified and as directed.

Supply, fixing and connecting in repair single core, PVC Insulated, PVC sheathed cable, 1100 Volt grade, copper multistranded conductor of size 10.0 Sqmm, as in service wire conductor for 30 KVA UPS complete including testing, commissioning complete all as specified and as directed.

Excavation in trenches not exc 1.5 m wide and not exc 1.5 m in depth for foundation / fixing pole / laying cable and pipe line etc not exc 10 Sqm on plan and getting out in soft / loose soil complete all as specified and as directed.

Returning filling in including spreading, levelling, watering and well ramming in layers, not exceeding 25 cm thick complete all as specified and as directed.

Removing excavated Soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed.

M&L for providing dry river sand as in sand cushioning to under ground electric cable including punning down of sand in layer complete all as specified and as directed. Note: For measurement purpose punned thickness of sand shall only be considered.

Supply and Laying burn brick, sub class 'B' size 225 mm X 113 mm X 75 mm as in protection to cable including taking down old bricks complete all as specified and as directed.

Supply, Laying, connecting, testing and commissioning in replacement LT cable, PVC sheathed, XLPE cable, armoured aluminium conductor, 1100 Volt grade, 16 Sqmm, 4 core including taking out/down old existing unserviceable cable from trenches/ ducks/ road crossing and poles complete all as specified and as directed.

All as per item No 53.00 here in before but 25 Sqmm, 3.5 core cable complete all as specified and as directed.

All as per item No 53.00 here in before but 35 Sqmm, 3.5 core cable complete all as specified and as directed.

All as per item No 53.00 here in before but 50 Sqmm, 3.5 core cable complete all as specified and as directed.

All as per item No 53.00 here in before but 70 Sqmm, 3.5 core cable complete all as specified and as directed.

All as per item No 53.00 here in before but 95 Sqmm, 3.5 core cable complete all as specified and as directed.

All as per item No 53.00 here in before but 300 Sqmm, 3.5 core cable complete all as specified and as directed.

Supply, Laying, connecting, testing and commissioning in replacement LT cable, PVC sheathed, XLPE cable, armoured, aluminium conductor, 1100 Volt grade, 630 Sqmm, single core including taking out/down old existing unserviceable cable from trenches/ ducks/ road crossing and poles complete all as specified and as directed.

M&L cleaning of fuel tank made of MS sheet of 750/250 KVA DG Set of 1000 litre capacity approx by draining out fuel in a separate container, taking out all silt/ dirt deposition inside the tank, cleaning it completely by manual labour, necessary T&P, refitting and connecting with fuel pipes with DG sets all as per site requirement complete all as specified and as directed.

Supply only inhibitor corrosion (Coolant) green/red suitable for DG Sets 40 KVA to 320 KVA capacity complete all as specified and as directed.

Supply only Lubricant oil, 20W/40 multigrade or suitable for DG Sets 40 KVA to 320 KVA capacity complete all as specified and as directed.

S&F in repair 800Amp Fuse Switch units, fitted with sturdy side operating handle which drives the quick make break mechanism incorporating operating springs. Liberal sized silver plated terminals, suitable for aluminium cable/bus-bar termination, provided with terminal cover shields to prevent any accidental contact with live metal parts. Positive ON-OFF indication is provided on the switch door, Contacts made out of electrolytic copper, electro-plated with silver, for better contact and greater resistance to corrosion, Specially designed female contacts ensure low contact resistance and better arc-control. Fuse switches designed for use with HBC Cartridge fuse links conforming to IS:13703. The enclosure shall be made out of sheet steel, rust protected, phosphatised and powder coated, duly fitted with removable top and bottom end plates, provided with knock- outs for bus bars/cables entry, front accessible door, fitted with dust-excluding gasket, interlocked to prevent opening when the switch is in ‘ON’ condition, suitable for surface mounting complete all as specified and as directed. Make Havells Cat No -IHFNTW4800/SCHINDER/SEIMENS or equivalent Model of Makes Mentioned in PS.

S&F in repair 200Amp Fuse Switch units, fitted with sturdy side operating handle which drives the quick make break mechanism incorporating operating springs. Liberal sized silver plated terminals, suitable for aluminium cable/bus-bar termination, provided with terminal cover shields to prevent any accidental contact with live metal parts. Positive ON-OFF indication is provided on the switch door, Contacts made out of electrolytic copper, electro-plated with silver, for better contact and greater resistance to corrosion, Specially designed female contacts ensure low contact resistance and better arc-control. Fuse switches designed for use with HBC Cartridge fuse links conforming to IS:13703. The enclosure shall be made out of sheet steel, rust protected, phosphatised and powder coated, duly fitted with removable top and bottom end plates, provided with knock- outs for bus bars/cables entry, front accessible door, fitted with dust-excluding gasket, interlocked to prevent opening when the switch is in ‘ON’ condition, suitable for surface mounting complete all as specified and as directed. Make Havells Cat No -IHFNTW4200 or equivalent Model of Makes Mentioned in PS.

S&F in repair 100Amp Fuse Switch units, fitted with sturdy side operating handle which drives the quick make break mechanism incorporating operating springs. Liberal sized silver plated terminals, suitable for aluminium cable/bus-bar termination, provided with terminal cover shields to prevent any accidental contact with live metal parts. Positive ON-OFF indication is provided on the switch door, Contacts made out of electrolytic copper, electro-plated with silver, for better contact and greater resistance to corrosion, Specially designed female contacts ensure low contact resistance and better arc-control. Fuse switches designed for use with HBC Cartridge fuse links conforming to IS:13703. The enclosure shall be made out of sheet steel, rust protected, phosphatised and powder coated, duly fitted with removable top and bottom end plates, provided with knock- outs for bus bars/cables entry, front accessible door, fitted with dust-excluding gasket, interlocked to prevent opening when the switch is in ‘ON’ condition, suitable for surface mounting complete all as specified and as directed. Make Havells Cat No -IHFNTW4100 or equivalent Model of Makes Mentioned in PS.

S&F in repair 200 Amp Bus bar chamber, 4 way, wall mounted, of size 400X300X150 mm, fabricated using sheet steel (CRCA) and epoxy powder coated to give superior & lasting finish, bus bar sections shall be made out of ETP grade copper & dull tin plated, bus bar supports shall be made out of DMC (Dough moulding compound), Left & Right side end plates shall be detachable complete all as specified and as directed. Make- Havells cat IHBC020004 or equivalent Model of Makes Mentioned in PS.

S&F in repair 400 Amp Bus bar chamber, 4 way, wall mounted, of size 400X300X150 mm, fabricated using sheet steel (CRCA) and epoxy powder coated to give superior & lasting finish, bus bar sections shall be made out of ETP grade copper & dull tin plated, bus bar supports shall be made out of DMC (Dough moulding compound), Left & Right side end plates shall be detachable complete all as specified and as directed. Make- Havells cat IHBC040004 or equivalent Model of Makes Mentioned in PS.

S&F in repair MCCB 800 Amp, four pole , 50 KA (Ics =100%, Icu as per IEC 60947-II, Class II front face, Suitable for isolation, Adjustable Overload Setting Ir =(0.8 to 1.0)xIn, Adjustable Short Circuit Setting Isd = (5 -10) xIn, suitable for installation inside Panel including addition alteration to existing copper/ aluminium bus bar system complete all as specified and as directed. Note:- Quoted rates shall be inclusive of the addition/ alteration in bus bar system.

S&F in repair On load change over switch, 320 Amp, capacity, 4 pole, with MS Enclosure, made of 3.15 mm thick steel sheet and extensible handle mounting stand, made from 35 x 35 x 5 mm thick channel, floor mounted and fixing in ground and necessary mounting accessories complete all as specified and as directed. Make:- Havells Cat No IHBFFE0320 or equivalent Model of Makes Mentioned in PS.

S&F in repair On load change over switch, 400 Amp, capacity, 4 pole, with MS Enclosure, made of 3.15 mm thick steel sheet and extensible handle mounting stand, made from 35 x 35 x 5 mm thick channel, floor mounted and fixing in ground and necessary mounting accessories complete all as specified and as directed. Make:- Havells Cat No IHBFFE0400 or equivalent Model of Makes Mentioned in PS.

S&F in repair Power Contactor type MNX of size Fr6, suitable for existing starter panel complete all as specified and as directed. Make L&T, Model CS94145, type MNX 550 or equivalent Model of Makes Mentioned in PS.

S&F in repair Copper Tube terminals (Lugs) 10 Sqmm complete all as specified and as directed.

S&F in repair Copper Tube terminals (Lugs) 16 Sqmm complete all as specified and as directed.

S&F in repair Copper Tube terminals (Lugs) 25 Sqmm complete all as specified and as directed.

S&F in repair Copper Tube terminals (Lugs) 35 Sqmm complete all as specified and as directed.

S&F in repair Copper Tube terminals (Lugs) 50 Sqmm complete all as specified and as directed.

S&F in repair Copper Tube terminals (Lugs) 70 Sqmm complete all as specified and as directed.

S&F in repair Copper Tube terminals (Lugs) 95 Sqmm complete all as specified and as directed.

S&F in repair Copper Tube terminals (Lugs) 120 Sqmm complete all as specified and as directed.

S&F in repair Copper Tube terminals (Lugs) 185 Sqmm complete all as specified and as directed.

S&F in repair Copper Tube terminals (Lugs) 240 Sqmm complete all as specified and as directed.

S&F in repair Copper Tube terminals (Lugs) 300 Sqmm complete all as specified and as directed.

S&F in repair Copper Tube terminals (Lugs) 400 Sqmm complete all as specified and as directed.

S&F in repair Copper Tube terminals (Lugs) 630 Sqmm complete all as specified and as directed.

S&F in repair Aluminium Tube terminals (Lugs) 25/16 Sqmm complete all as specified and as directed.

S&F in repair Aluminium Tube terminals (Lugs) 35 Sqmm complete all as specified and as directed.

S&F in repair Aluminium Tube terminals (Lugs) 50 Sqmm complete all as specified and as directed.

S&F in repair Aluminium Tube terminals (Lugs) 70 Sqmm complete all as specified and as directed.

S&F in repair Aluminium Tube terminals (Lugs) 95 Sqmm complete all as specified and as directed.

S&F in repair Aluminium Tube terminals (Lugs) 120 Sqmm complete all as specified and as directed.

S&F in repair Aluminium Tube terminals (Lugs) 185 Sqmm complete all as specified and as directed.

S&F in repair Aluminium Tube terminals (Lugs) 240 Sqmm complete all as specified and as directed.

S&F in repair Aluminium Tube terminals (Lugs) 300 Sqmm complete all as specified and as directed.

S&F in repair Aluminium Tube terminals (Lugs) 400 Sqmm complete all as specified and as directed.

S&F in repair Aluminium Tube terminals (Lugs) 500 Sqmm complete all as specified and as directed.

Supply only LT insulation Tape, 25mmx50 Metre complete all as specified and as directed. Make Pidilite/3M/Raychem.

Supply only Distilled Water for DG Set battery complete all as specified and as directed.

RUCHIKA ENGG.WORKS

M/s Birja Nand

Saini Enterprises

Surjit and Sons

Ridhi engineers and builders