Construction of Kitchen Shed cum Dining Hall Near Sri Angalamman Koil SHG Federation Building(First Floor) at Ikkaraiboluvampatti H/o Ikkaraiboluvampatti Panchayat

Amount

Construction of Kitchen shed cum Dining Hall near Sri Angalamman Koil SHG Federation Building (First Floor) at IkkaraiBoluvampatti H/O IkkaraiBoluvampatti Panchayat

Dismantling and removing one course of pressed tiles including all labour charges etc.,

Dismantling and removing cement plasterd surface from wall including all labour charges etc.,

Brick work in C.M 1:5 mix using Fly ash bricks incuding cost and conveyance and all labour charges etc. (Kitchen, In First Floor, Dining, Stair room and Hand wash)

Supplying and errecting for sides & soffits including supports and strutting upto 3.29m height for plane surface in all floors including cost and conveyance and all labour charges etc. (Kitchen and Dining)

Supply and fabrication of steel including cost and conveyance and all labour charges etc. complete.

RCC 1:1.5:3 mix using 20mm metal including cost and conveyance and all labour charges etc. (Kitchen In First Floor and Dining)

Fabrication, Supply and erection of Steel Structures as per the specification, dimensions and design requirement including all labour charges and other charges etc. complete (including Primary and Secondary framing, foundation bolts, Stiffener plate, Cleat plate, fasteners, cold formed Purlin members, MS angle, Rectangular Hollow sections, Sag rods, Bracing rods, End plate, Base plate, Connection plate etc using welding)

Providing Rectangular hollow section of size 100mmx50mmx3.2mm

Providing rectangular hollow section of size 60mmx40mmx2.9mm

Supplying of colour coated galvanised sheet 0.47 mm thick for roofing including fixing in position with all necessary accessories complete complying with standard specification

Plastering with cement mortar 1;5, using 12mm thick in all floors etc.,complete.

Paving the floor with best quality Vitrified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three crushed stone M.Sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification.

Cost & supply of following doors and windows including loading and unloading etc

Kitchen

MS Door 1.80x2.10m

MS ventilator 0.90x0.60m

Dining

MS Door 1.80x2.10m

MS Door 1.00x2.10m

MS Window 1.00x1.30m

Distembering two coats including priming coat with best approved distember and primer including costand conveyance of all materials to site and all labour charges etc complete

Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

Painting the new iron works with two coats of Synthetic Enamel Paint including Scaffolding Charges, brushes etc., Complete as per Specification.

Provision for Electricity Arrangements

Wiring with 2x1.5 sqmm (22/0.3) PVC insulated FRLS Cu.Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 3mm thick hylem sheet cover with TW switch box and 5A F.T. switch and making good of the concealed portion with suitable colour for open PVC light / Fan Point (For electronic regulator) (5 Points Per Coil) SD18

Wiring with 2x1.5sqmm (22/0.3) FRLS Cu.Conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories, in flush with wall, with 150mm x 100mm x 113mm TW switch box with 3 mm thick Hylem sheet cover for 5 A 3 pin non inter locking Wall socket with 5A Flush type switch with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for open PVC plug point. SD 36

Wiring with 2x1.5sqmm (22/0.3) PVC insulated FRLS Cu.Conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories, in flush with wall, with 150mm x 100mm x 113mm TW switch box with 3 mm thick Hylem sheet cover for 5 A 3 pin non inter locking Wall socket with 5A Flush type switch with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for open PVC plug point. SD 41

Supply and fixing of single box type 4'40 W flu fitting complete with copper choke and condenser with TW round blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting. SD 88

Supply and fixing of 450mm(18") sweep(lightduty) AC exhaust fan complete with necessary wall opening and making good of the wall SD 118

Supply and fixing of 1200mm (48")AC ceiling fan complete with stepped electronic 300W regulator with 300mm downrod on the existing clampSD 110

Supplying and fixing of cuddapah slab including costand conveyance of all materials to site and all labour charges etc complete 50 mm thick (M-0130)

Cost & supply of Cuddapah sink including loading and unloading etc

Supplying and fixing of Granite slab including cost and conveyance of all materials to site and all labour charges etc complete

Supplying and fixing 110 mm dia. PVC down fall pipes ncluding cost and conveyance of all materials to site and all labour charges etc complete

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

MURUGAN AYYASAMY (BID ID -1459461)