Construction of Toilet For DG Vigilance Office at 12th Floor South Wing and other Misc Civil Work at Shakti Bhawan Extn Lucknow

Amount

Laying and Jointing PVC Pipe. Heading

Cement concrete with 2cm gauge approved hard stone ballast, coarse sand (F.M. 1.8 to 2.5) and cement in proportion of 4:2:1 including supply of all materials, labour,side shuttering if required and T&P etc. required for proper completion of work.

First class half brick work in superstructure in 1:4 cement and coarse sand F.M.1.8 to 2.5) mortar in S.S.including supply of all materials, labour & T&P etc. required for proper completion of work.

P/F fully Anodized aluminium fixed glazing with HINDALCO or equivalent extruded standard sections14gauge (2.41mm thick) of various cross sections and joints mitred and jointed as shown in drawing including providing & fixing 5.5 mm thick toughened glass with Neoprene beading & aluminium glazing clips all around. The minimum thickness of anodizing on all aluminium sections should be 20 microns with a (+) 2 microns tolerance . The rate should include the cost of fixing the aluminum frame on Teak wood frame or finished wall (RB/RCC/Masonry) surface by means of 80 mm long approved counter sunk screws provided at 500 mm c/c or part there of starting from 100 mm above the bottom in vertical member and 100 mm from both the ends of horizontal top and bottom member excluding cost of Teak frame but including cost of all other material, labour, tools & plants etc. complete.

Providing and fixing ACP in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With ACP of 4.0 mm thickness

Supply and fixing of Godrej make hydraulic door closure of approved make & quality its fixing and adjustment with the help of screws, nuts and bolts including supply of all labour, T & P etc. required for proper completion of the work.

RCC work with cement, approved coarse sand and 2 cm gauge graded approved hard stone ballast like granite, quartzite etc from Dalla, Jhansi or other quarries in proportion 1:1.5:3 in lintels of doors and windows, excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and T&P.

Mild Steel or Iron work in heavy sizes such as trusses built up gates, door framesh, record, racks roof work gates etc wrought to required frorm including holes rivetting or we4lding where necessary and also fixing in proper position and alignment including cost of all materiasl supplied by contractor.

Provinding & Fixing of Ancor Fastner Wedge type (12 mm dia 50 mm long) including supply of all labour, T&P etc. required for proper completion of the work.

12 mm thick plaster with cement mortar consisting of one part of cement & Six part of coarse sand (1:6), minimum thickness Not to be less then 10 mm including supply of all material, labour and T&P etc for proper completion of work.

Supply and fixing 24 B.W.G , G.C. Iron Sheet roofing .fixed in position with J or U bolts 10 mm. dia with G.I. Limpet & bitumen washers including supply of all materials, labour,wastage. and T&P etc. required for proper completion of the work.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.5 mm thickness.

Providing and laying floor of 8 mm thick vitrified tiles in flooring or skirting of approved brand (Bell, Johnson or equi. make) size of 600x600 mm of approved shade, colour and pattern , laid over base cement mortar 1:4 mix including finishing the joints with white cement mixed with pigment to match the shade of tile including cost of all material, labour and T&P required for proper completion of the work.

Supply and Laying 6 mm thick glazed tiles of size 300x450 mm in skirting / dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry, jointing and polishing complete,including supply of all materials, labour and T&P etc. completion required for proper completion of the work.

Providing and laying of 16 mm thick granite ( black/ brown) in flooring or skirting ,of approved shade, colour,size and pattern , laid over base cement mortar 1:4 mix including finishing the joints with white cement mixed with pigment to match the shade of granite floor including cost of all material, labour and T&P required for proper completion of the work, as per direction of Engineer incharge.

Applying BIRLA PUTTY or equivalent putty on previousaly bila putty smoothen surface over one cost of water base cement primer of ICI or equivalent brand for smoothining and leveling of the surface as per requirement and direction of E/I including cost of all material , labour and T&P required for proper completion of work.

Painting with one coat of Acrylic emulsion paint of Berger/ Asian/ ICI or equivalent paint on previously painted surface. including all labour, material and T&P etc required for proper completion of the work, ( preparation of base with Birla putty etc. and a coating of primer shall be paid extra) .

Same as above in Item No-18 but for every coat after first coat of Acrylic emulsion paint of Berger/ Asian/ ICI or equivalent paint.

Dismantling brick work or stone work in lime or cement mortar and including stacking of materials as directed by the Engineer-in-charge within a distance of 60 metres.

Dismantling for floors to be stone flagged or tiled floor. including base concrete and including stacking of dismantled materials as directed by the Engineer In-charge within a distance of 60 metres.

Dismantling existing plaster including disposal of refuse as directed by the Engineer-I/C with in a distance of 60 M.

Dismantling doors or window leaves including stacking of materials as directed by the Engineer I/C within a dist. 60 M.

Scrapping old white or colour wash or distemper including disposal of refuse as directed by the Engineer-I/C within a distance of 60 M.

Renewing panes of 4 mm glass including supply of glass with putty and brads including supply of all materials, labour and t&P etc. required for proper completion of the work.

Disposal of rubbish / debris out side the UPPCL area as per direction of Er/in- charge including cartage, labour and materials, T&P etc. required for proper completion of the work. (No. deduction for voids shall be made).

Repair to plaster or pointing in patches including removal of old plaster racking out joints to 1 cm.(3/8") depth, watering the area and then replastering or reappointing with the same mortar or proportion of mortar as the existing surface including supply of all materials, labour and T&P etc. required for proper completion of the work add to the respective items in chap11 (11.09) (Plaster and Pointing).

Providing and fixing full way20 mm dia G.M. gate valve with wheel, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work.

Providing and fixing full way 65 mm dia G.M. gate valve with wheel, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work.

Making water connection of pipe line with Mains ( 25 mm to 100 mm ) dia. by providing and fixing Ferrule (25 mm dia) GI union and nipple including cutting and threading the pipe, inspection, testing, cutting and making good the road, executing bond with Nagar maha palika, fixing of pipe line upto the points near the building complete work including supply of all materials, labour and T&P etc. required for proper completion of work.

Providing and fixing 600 mm x 450 mm beveled edge mirror of Atul,Kiran makeglass with Indian polish 6.50 mm thick complete with back of 600 mm x 450 mm x 6 mm hard board sheet fixed to wooden cieats with C.P. brass screws and washers including supply of all materials, labour and T&P etc.required for proper completion of the work.

Providing and fixing 750 mm x 20 mm size C.P. brass towel rail of approved quality including brackets including supply of all materials,labour and T&P etc. required for proper completion of the work and cutting and making good the wall plaster etc. required for work.

Providing and fixing soap dish chromium plated with brackets fixed to wooden cleats with brass screws including supply of all materials,labour and T&P etc.required for proper completion of the work.

Supply and fixing 100 mm PVC Nahani Trap India make of heavy approved quality complete with CI grating, including supply of all materials,labour and T&P etc. required for proper completion of the work.

Providing and fixing CI GRATING 100 mm dia including all materials, labour cartage T&P etc.required for proper completion of the work.

Providing and laying , PVC ( FiNolex or quivalent ) pipe excluding cost of excavation, C.C. etc including its jointing and connection, all materials, labour and T&P etc. required for proper completion of the work 110 mm dia.

Providing and fixing 110 mm dia SWR, PVC ( FiNolex or equivalent ) Bends including cost of all materials, labour and T&P etc required for proper completion of the work.

Providing and fixing 110 mm dia SWR, PVC ( FiNolex or equivalent )Trap including cost of all materials, labour and T&P etc required for proper completion of the work.

Providing and fixing 110 mm dia SWR, PVC ( FiNolex or equivalent )socket including cost of all materials, labour and T&P etc required for proper completion of the work.

Providing and fixing 110 m m dia SWR, PVC ( FiNolex or equivalent ) plain tee including cost of all materials, labour and T&P etc required for proper completion of the work.

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.

Providing and fixing false ceiling at all heights with integral densifiedr Armstrong false ceiling tiles of Size 595x595 x12 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as perBS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM 518:1991, in true horizontal level suspended on interlocking metal powder coated T-Grid of hot dipped galvanised iron section of 0.40 mm thick on Silhouette profile,rotary stiched double webbed white with 6 SUB HEAD : 26- NEW TECHNOLOGIES AND MATERIALS 1632 mm reveal profile white/black),comprising of main-T runners of size 15x42 mm of length 3000 mm, cross - T of size 15x42 mm of length 1200 mm and secondary intermediate cross-T of size 15x42 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in- Charge. 26.23.1 With 12 mm thick Armstrong Miniral Fobre Sound Absorbing Sheet including cost of all materials,labour and T&P etc. required for proper completion of the work.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.

20 mm dia nominal bore outer dia pipe

32 mm dia nominal bore outer dia pipe

Core Cutting work 160 mm dia for Brick/RCC wall including supply of all materials, labour and T&P etc. required for proper completion of the work.

Providing and fixing sun-film of Gareware or equivalent make on glass panes of door and window shutters including cost of all materials,labour and T&P etc. required for proper completion of the work.

Providing and fixing of Supreme make or equivalent make 160 mm dia PVC pipe of 6 Kg pressure for ground floor to 04th Floor vertically in duct/wall including cost of scafolding, all labor material, T&P etc required for proper completion of the work.NSI

Providing and fixing full height Partition with 02 NOS 12 mm thick ISI marked ply board, all surfaces to finished withf 1 mm thick mica of texture and colour as approved by Engineer in Charge and fixed in polished teak wood including all labour, T&P, other items like (but not limited to) fevicol, nails screws, hinges, sliders,door handles, multipurpose lock of godrej or equivalent rate etc. required for proper completion of works, to be measured interms of front area only

Providing & fixing of Lamination both side on flush door complete with all fittings(excluding cost of Door Lock & Door Closure), etc all complete all complete as per drawing, specification and direction of engineer incharge.

Supply and fixing brass polished 200 mm Door handle set with Lock Body Godrej or Equivalent make its fixing and adjustment with the help of screws, nuts and bolts including supply of all labour, T & P etc. required for proper completion of the work.

Replacing Existing old damage Tile and Fixing New false ceiling with 12mm thick Arm strong Fire resistant gyp board false ceiling system of approved type fixed to a Withrequired hanger Including supply of all materials, labour and T & P etc required for proper completion of work.

Supply and fixing of of waste Coupling of make Model No-ALD-705L130 of Jaquar make or equivalent. make as approved by E/I. The work includes cost of all labour, material T&P for proper completion of work

Supply and fixing of Health Faucet Model No-ALD-CHR-565 With 1.00 Mtr Long Flexible Tube in chrome Finish and Wall Hook of Jaquar make or equivalent. make as approved by E/I. The work includes cost of all labour, material T&P for proper completion of work

Supply and fixing of Single piece-WC with UF Soft Close Slim Seat Cover, Fixing Accessories, Accessories set and Cistern Fittings, Size: 370x670x720 mm, P Trap-180mm Model LYS-WHT-38851S220UFSM of Jaguar make or equivalent. make The work includes cost of all labour, material T&P for proper completion of work as approved by E/I.

Supply and fixing of Wash basin Vanity+Mirror Size-605X470X540 Padestal Model No- KB0331 of Kerovit make The work includes cost of all labour, material T&P for proper completion of work as approved by E/I.

Supply and fixing of Paper Holder Model No AHS-1553 of Jaquar make or equivalent. make as approved by E/I. The work includes cost of all labour, material T&P for proper completion of work

Supply and fixing of Soap Dispencer Model No AKP-35735P of Jaquar make or equivalent. make as approved by E/I. The work includes cost of all labour, material T&P for proper completion of work

Supply and fixing of Two way Bib cock with wall flange Model Noopp-15041PM of Jaquar make or equivalent. make as approved by E/I. The work includes cost of all labour, material T&P for proper completion of work

Supply and fixing of Urinal with Fixing Accessories, Size: 370x315x620 mm Model -URS-WHT-13253O f Jaguar make or equivalent. make as approved by E/I. The work includes cost of all labour, material T&P for proper completion of work

Supply and fixing of Sensor Mini Concealed Type Flushing Valve for Urinal Complete Set with Installation Box (Battery Operated) Model-SNR-STL-51083 Jaguar make or equivalent. make as approved by E/I. The work includes cost of all labour, material T&P for proper completion of work

Supply and fixing of Basin trap with regular swinging spout(wall mounted model) with Model No-FLR-CHR-5347N of Jaquar make or equivalent. make as approved by E/I. The work includes cost of all labour, material T&P for proper completion of work

Supply and fixing of Angular Stop cock with wall flange Model No-OPP-15053PMof Jaquar make or equivalent. make as approved by E/I. The work includes cost of all labour, material T&P for proper completion of work

Wiring point for light with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable but in PVC conduit with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit with modular type switch in place of piano type switch.

Wiring point for fan / fresh air fan (light duty exhaust fan) with 1.5 sq.mm. FRLSH PVC insulated multistrand single core copper conductor cable in in PVC conduit with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduitwith modular type switch in place of piano type switch

Wiring Point for plug with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit plug point with modular switch & socket in place of piano type switch & socket.

Providing & Fixing of Roller Blinds of approved shade as per drawing & specification as approved by the Architect/ Engineer -in-Charge.

Supply and Fixing of 5 blade Exhaust fan ventile air dx 225 mm of Havells or equivalent make including all material, T&P etc required for proper completion of work as approved by engineer in charge.

AAKRITI ENTERPRISES

M/S OM SERVICES