Loading
Loading…
Loading…
Tender Value
₹46.7 L
EMD Value
₹93,500
Closing Date
25 Apr 2026, 4:00 pmClosed
PRABHAT KUMAR
Executive Engineer
P.H Division Gopalganj Near Minz Stadium Pani Tanki
SUBODH SHANKAR
SE
Construction of 125mm X 40mm dia X 61 meter deep hand operated T/well with India Mark II Hand Pump with Platform and drain with Soak pit in Due to heat and heat wave conditions and falling water level in the districts of Gopalganj under P. H. Division, Gopalganj for the year 2026-27 . Total Nos 50
129494
NIT-02R1/2026-27/HP/PHED GOPALGANJ
Open Tender
CIVIL
Gopalganj
• Registration Certificate of appropriate Class of Govt. of Bihar
• GST REGISTRATION NUMBER
• ACCEPTED ALL TERM AND CONDITION AS PER NIT/TENDER DOCUMENT.
CIVIL
PERCENTAGE
L1
1
9 documents required · 9 mandatory
₹5,000
Processing Fee: 590
₹93,500
Yes
20 Apr 2026
20 Apr 2026
27 Apr 2026
20 Apr 2026
25 Apr 2026
20 Apr 2026
Sub Estimate no. 1
Estimate - For requirement of spare parts for repairs and maintenance of I.M.-II/ III hand pumps as per department yard stick.
Nos. of IM-III hand pump requiring repair 360 Nos.
Nos. of IM-II hand pump requiring repair 530 Nos.
Total Nos. of IM hand pump requiring repair Nos.
SI. No. Particulars of materials Qty. Reqd Unit Rate (In Rs.) Amount (In Rs.)
1 Handle Axle (S/S) 100 nos. each 207
2 Washer 4 mm thick for handle Axle 100 nos. each 4.95
3 M 12 X 1.75 X 40 mm long Hexogonal bolt 1000 nos. each 6.45
4 M 12 X 1.75 mm nut Hexogonal bolt 1000 nos. each 3.45
5 Hightensile M 10 X 1.5 X 40 mm long bolt 1000 nos. each 16.8
6 Nyloc Nut for M 10 Bolt 100 nos. each 6.45
7 Chain with coupling 90 nos. each 204
8 Spacers for handle 80 nos. each 15.4
9 Nitrile or chromium cup washer 484 nos. each 23.45
10 Nitrile Rubber seating Ring (big) 300 nos. each 7.45
11 Nitrile Rubber seating Ring (small) 300 nos. each 5.6
12 Hexagonal Rod coupling M 12 X 1.75 X 50 mm long 300 nos. each ###0.99
13 Water tank Assembly for IM-II 14 nos. each 1360
14 Cylinder Assembly for IM-III 46 nos. each 2315
15 Cylinder Assembly for IM-II 28 nos. each 2171
16 Plunger Rod (S/S) IM-III 40 nos. each 244
17 Plunger Rod (S/S) IM-II 40 nos. each 238
18 Upper valve assembly for IM- III 90 nos. each 711
19 Upper valve assembly for IM- II 60 nos. each 590
20 Lower Valve Assembly III 90 nos. each 797
21 Lower Valve Assembly II 60 nos. each 299
22 Nitrile rubber 'O' ring 780 no. each 7.95
23 Upper Cap cylinder Mark-III 51 nos. each 261.7
24 Bottom cap cylinder Mark-III 51 nos. each ###0.99
25 Follower for IM- III 51 nos. each 228.65
26 Check Valve for Seat for IM- II 80 nos. each 170.5
Cost of spare parts of 890 nos. IM-II/ III T/well.
Executive Engineer
P. H. Division, Gopalganj
Sub Estimate no. 2
Estimate - For requirement of spare parts for repairs and maintenance of Shallow Well Hand Pump (Singur )
Nos. of Singur hand pump requiring repair 1018 Nos.
SI. Particulars of materials Qty Required for Repair work Unit Rate (In Rs.) Amount (In Rs.)
1 C. I Body 60 Nos. each 1125
2 C.I Handle 80 Nos. each 549
3 Plunger pin 150 Nos. each 30.15
4 C.I Base 50 Nos. each 449
5 C.I Head 60 Nos. each 499
6 fulcrum pin 125 Nos. each ###0.00
7 M.S Plunger rod with eye 300 Nos. each 125
8 threaded bush 200 Nos. each 30
9 Hardened Bush 200 Nos. each 19.84
10 Plunger Plate 200 Nos. each 30.85
11 Follower Plate 200 Nos. each 30.85
12 Cup Seal 600 Nos. each ###0.99
13 Check Valve 800 Nos. each 13.45
14 Check valve guide 800 Nos. each 27
15 Rubber gasket 800 Nos. each 15.95
16 Hexa bolt M12 x1.75 -65MM Long 6000 Nos. each 7.9
17 Hexa nut M12 x1.75 6000 Nos. each 2.9
18 Spring Washer 1500 Nos. each 1.45
19 Cir clip 1500 Nos. each 1
Cost of spare parts for 1018 nos. T/well.
Executive Engineer
P. H. Division, Gopalganj
Sub Estimate no. 3
Estimate - For requirement of spare parts for repairs and maintenance of Ordinary Well Hand Pump (Ordinary No-06 )
Nos. of Ordinary hand pump requiring repair 2025 Nos.
SI. Particulars of materials Qty Required for Repair work Unit Rate (In Rs.) Amount (In Rs.)
1 C.I Barrel (Wt.Not less than 14 kg) 60 Nos. each 770
2 C.I Handle (Wt.Not less than 5 kg) 120 Nos. each 247.5
3 C.I Plunger (Wt.Not less than 700 g) 80 Nos. each 49.5
4 C.I Base (Wt.Not less than 4.5 kg) 70 Nos. each ###0.99
5 C.I Head Cover (Wt.Not less than 4.5 kg) 70 Nos. each 247.5
6 C.I Weight valve 600 Nos. each 6.74
7 90mm leather Bucket 2000 Nos. each 31.26
8 Leather Flap Valve 2000 Nos. each 20.9
G.I Nut & Bolt 1000 Nos. each 1
9 Nut & Bolts @1.5 kg / H.P
a 12mm x 90mm Long 339 kg each ###0.00
b 12mm x 65mm Long 943 kg each ###0.00
c 10mm x 65mm Long 503 kg each ###0.00
d 10mm x 50mm Long 101 kg each ###0.00
Cost of spare parts for 1257 nos. T/well.
Executive Engineer
P. H. Division, Gopalganj
GOVERNMENT OF BIHAR
Public Health Engineering Department
PUBLIC HEALTH DIVISION, GOPALGANJ
B.O.Q. FOR THE WORK- Construction of 125mm X 40mm dia X 61 meter deep hand operated T/well with India Mark II Hand Pump with Platform and drain with Soak pit in Due to heat and heat wave conditions and falling water level in the districts of Gopalganj under P. H. Division, Gopalganj for the year 2026-27. Total Nos 50
Date of Tender :- 2026-10-04T00:00:00Z
Estimated Cost:- 4672200
Earnest Money (In specified shape only):- 93500
Time of Completion :- 3 Month
Cost of BOQ :- Rs. 5000.00 (As per Online)
BSEDC Processing Fee :- Rs. 590.00 (As per Online)
B.O.Q. FOR THE WORK- Construction of 125mm X 40mm dia X 61 meter deep hand operated T/well with India Mark II Hand Pump with Platform and drain with Soak pit in Due to heat and heat wave conditions and falling water level in the districts of Gopalganj under P. H. Division, Gopalganj for the year 2026-27
Sr. No. Particulars Quantity Unit Rate Amount
1 Construction of 125mm X 40mm dia X 61 meter deep hand operated T/well with India Mark II Hand Pump with 1.85 mtr dia circular PCC Platform and 3.0 mtr long PCC drain in heat and heat wave conditions and falling water level in the district of Gopalganj under P. H. Division, Gopalganj for the year 2025-26 (as per Sub Estimated- 1) 50 Nos. Each 85041.26
2 Construction of 1.0m dia. and 2.0 metre deep Soak Pit with dry brick honey comb shaft with 100B bricks near Newly Constructed 50 Nos Hand Pumps under P.H Division Gopalganj 2025-26 (as per Sub Estimated- 2) 50 Nos. Each "R1."\ #,##0.00_);\("R1."\ #,##0.00\)
Executive Engineer
P.H. Division, GOPALGANJ
SCHEDULE - B …………………… NIL
SCHEDULE- C …………………….. NIL
Executive Engineer
P.H. Division, GOPALGANJ
1 Estimated cost (in Rs.) :-
2 Cost of Govt. Material :- NIL
3 Permissible limit. :-
4 Name of the Contractor :-
5 Address of the Contractor :-
6 I/we offer in Figures……. in words………………… % (Percentage) High / Less/Estimated rate mentioned in the Bill of quantity. IN FIG.
Executive Engineer, P.H.Division, GOPALGANJ
Name of Work B.O.Q. FOR THE WORK- Construction of 125mm X 40mm dia X 61 meter deep hand operated T/well with India Mark II Hand Pump with Platform and drain with Soak pit in Due to heat and heat wave conditions and falling water level in the districts of Gopalganj under P. H. Division, Gopalganj for the year 2026-27 Cost of Work as per BOQ 4672200
Time of Completion (in Month) Name of the contractor
3 Month Address of the contractor
Sl No. Items Requirement
1 Earnest Money (A) As prescribed in Tender document duly pledged in Favour of Executive Engineer, P.H. Division, GOPALGANJ
93500 Earnest money - Rs.93500.00
2 Registration Certificate of appropriate Class of PHED, Govt. of Bihar
3 PAN No. of Income Tax and copy of up-to-date Income Tax Return.
4 GST VAT Registration No. and copy of the Certificate.
5 Valid Character certificate issued from DM/SP
6 Details of tools & Plant
7 Affidavit (as per latest stamp rule after publication of this tender) regarding previously awarded & pending works (as per clause 6 of the notes to tenderer)
8 Affidavit (as per latest stamp rule after publication of this tender) regarding Debarment / Black listing and Rescind of Contract (as per clause 6 of the notes to tenderer)
9 Turnover of last five years , performance report of last three years/ details of work done
10 power of attorny / Partnership deed /MOU of private limited company etc. if applicable
11 details of Skilled /technical Staffs
12 Email id for communication
Executive Engineer, P.H.Division, GOPALGANJ
Sub Estimate no. 1
Estimate - For requirement of spare parts for repairs and maintenance of I.M.-II/ III hand pumps as per department yard stick.
Nos. of IM-III hand pump requiring repair 360 Nos.
Nos. of IM-II hand pump requiring repair 530 Nos.
Total Nos. of IM hand pump requiring repair Nos.
SI. No. Particulars of materials Qty. Reqd Unit Rate (In Rs.) Amount (In Rs.)
1 Handle Axle (S/S) 100 nos. each 207
2 Washer 4 mm thick for handle Axle 100 nos. each 4.95
3 M 12 X 1.75 X 40 mm long Hexogonal bolt 1000 nos. each 6.45
4 M 12 X 1.75 mm nut Hexogonal bolt 1000 nos. each 3.45
5 Hightensile M 10 X 1.5 X 40 mm long bolt 1000 nos. each 16.8
6 Nyloc Nut for M 10 Bolt 100 nos. each 6.45
7 Chain with coupling 90 nos. each 204
8 Spacers for handle 80 nos. each 15.4
9 Nitrile or chromium cup washer 484 nos. each 23.45
10 Nitrile Rubber seating Ring (big) 300 nos. each 7.45
11 Nitrile Rubber seating Ring (small) 300 nos. each 5.6
12 Hexagonal Rod coupling M 12 X 1.75 X 50 mm long 300 nos. each ###0.99
13 Water tank Assembly for IM-II 14 nos. each 1360
14 Cylinder Assembly for IM-III 46 nos. each 2315
15 Cylinder Assembly for IM-II 28 nos. each 2171
16 Plunger Rod (S/S) IM-III 40 nos. each 244
17 Plunger Rod (S/S) IM-II 40 nos. each 238
18 Upper valve assembly for IM- III 90 nos. each 711
19 Upper valve assembly for IM- II 60 nos. each 590
20 Lower Valve Assembly III 90 nos. each 797
21 Lower Valve Assembly II 60 nos. each 299
22 Nitrile rubber 'O' ring 780 no. each 7.95
23 Upper Cap cylinder Mark-III 51 nos. each 261.7
24 Bottom cap cylinder Mark-III 51 nos. each ###0.99
25 Follower for IM- III 51 nos. each 228.65
26 Check Valve for Seat for IM- II 80 nos. each 170.5
Cost of spare parts of 890 nos. IM-II/ III T/well.
Executive Engineer
P. H. Division, Gopalganj
Sub Estimate no. 2
Estimate - For requirement of spare parts for repairs and maintenance of Shallow Well Hand Pump (Singur )
Nos. of Singur hand pump requiring repair 1018 Nos.
SI. Particulars of materials Qty Required for Repair work Unit Rate (In Rs.) Amount (In Rs.)
1 C. I Body 60 Nos. each 1125
2 C.I Handle 80 Nos. each 549
3 Plunger pin 150 Nos. each 30.15
4 C.I Base 50 Nos. each 449
5 C.I Head 60 Nos. each 499
6 fulcrum pin 125 Nos. each ###0.00
7 M.S Plunger rod with eye 300 Nos. each 125
8 threaded bush 200 Nos. each 30
9 Hardened Bush 200 Nos. each 19.84
10 Plunger Plate 200 Nos. each 30.85
11 Follower Plate 200 Nos. each 30.85
12 Cup Seal 600 Nos. each ###0.99
13 Check Valve 800 Nos. each 13.45
14 Check valve guide 800 Nos. each 27
15 Rubber gasket 800 Nos. each 15.95
16 Hexa bolt M12 x1.75 -65MM Long 6000 Nos. each 7.9
17 Hexa nut M12 x1.75 6000 Nos. each 2.9
18 Spring Washer 1500 Nos. each 1.45
19 Cir clip 1500 Nos. each 1
Cost of spare parts for 1018 nos. T/well.
Executive Engineer
P. H. Division, Gopalganj
Sub Estimate no. 3
Estimate - For requirement of spare parts for repairs and maintenance of Ordinary Well Hand Pump (Ordinary No-06 )
Nos. of Ordinary hand pump requiring repair 2025 Nos.
SI. Particulars of materials Qty Required for Repair work Unit Rate (In Rs.) Amount (In Rs.)
1 C.I Barrel (Wt.Not less than 14 kg) 60 Nos. each 770
2 C.I Handle (Wt.Not less than 5 kg) 120 Nos. each 247.5
3 C.I Plunger (Wt.Not less than 700 g) 80 Nos. each 49.5
4 C.I Base (Wt.Not less than 4.5 kg) 70 Nos. each ###0.99
5 C.I Head Cover (Wt.Not less than 4.5 kg) 70 Nos. each 247.5
6 C.I Weight valve 600 Nos. each 6.74
7 90mm leather Bucket 2000 Nos. each 31.26
8 Leather Flap Valve 2000 Nos. each 20.9
G.I Nut & Bolt 1000 Nos. each 1
9 Nut & Bolts @1.5 kg / H.P
a 12mm x 90mm Long 339 kg each ###0.00
b 12mm x 65mm Long 943 kg each ###0.00
c 10mm x 65mm Long 503 kg each ###0.00
d 10mm x 50mm Long 101 kg each ###0.00
Cost of spare parts for 1257 nos. T/well.
Executive Engineer
P. H. Division, Gopalganj
Sub Estimate no. 1
Estimate - For requirement of spare parts for repairs and maintenance of I.M.-II/ III hand pumps as per department yard stick.
Nos. of IM-III hand pump requiring repair 360 Nos.
Nos. of IM-II hand pump requiring repair 530 Nos.
Total Nos. of IM hand pump requiring repair Nos.
SI. No. Particulars of materials Qty. Reqd Unit Rate (In Rs.) Amount (In Rs.)
1 Handle Axle (S/S) 100 nos. each 207
2 Washer 4 mm thick for handle Axle 100 nos. each 4.95
3 M 12 X 1.75 X 40 mm long Hexogonal bolt 1000 nos. each 6.45
4 M 12 X 1.75 mm nut Hexogonal bolt 1000 nos. each 3.45
5 Hightensile M 10 X 1.5 X 40 mm long bolt 1000 nos. each 16.8
6 Nyloc Nut for M 10 Bolt 100 nos. each 6.45
7 Chain with coupling 90 nos. each 204
8 Spacers for handle 80 nos. each 15.4
9 Nitrile or chromium cup washer 484 nos. each 23.45
10 Nitrile Rubber seating Ring (big) 300 nos. each 7.45
11 Nitrile Rubber seating Ring (small) 300 nos. each 5.6
12 Hexagonal Rod coupling M 12 X 1.75 X 50 mm long 300 nos. each ###0.99
13 Water tank Assembly for IM-II 14 nos. each 1360
14 Cylinder Assembly for IM-III 46 nos. each 2315
15 Cylinder Assembly for IM-II 28 nos. each 2171
16 Plunger Rod (S/S) IM-III 40 nos. each 244
17 Plunger Rod (S/S) IM-II 40 nos. each 238
18 Upper valve assembly for IM- III 90 nos. each 711
19 Upper valve assembly for IM- II 60 nos. each 590
20 Lower Valve Assembly III 90 nos. each 797
21 Lower Valve Assembly II 60 nos. each 299
22 Nitrile rubber 'O' ring 780 no. each 7.95
23 Upper Cap cylinder Mark-III 51 nos. each 261.7
24 Bottom cap cylinder Mark-III 51 nos. each ###0.99
25 Follower for IM- III 51 nos. each 228.65
26 Check Valve for Seat for IM- II 80 nos. each 170.5
Cost of spare parts of 890 nos. IM-II/ III T/well.
Executive Engineer
P. H. Division, Gopalganj
Sub Estimate no. 2
Estimate - For requirement of spare parts for repairs and maintenance of Shallow Well Hand Pump (Singur )
Nos. of Singur hand pump requiring repair 1018 Nos.
SI. Particulars of materials Qty Required for Repair work Unit Rate (In Rs.) Amount (In Rs.)
1 C. I Body 60 Nos. each 1125
2 C.I Handle 80 Nos. each 549
3 Plunger pin 150 Nos. each 30.15
4 C.I Base 50 Nos. each 449
5 C.I Head 60 Nos. each 499
6 fulcrum pin 125 Nos. each ###0.00
7 M.S Plunger rod with eye 300 Nos. each 125
8 threaded bush 200 Nos. each 30
9 Hardened Bush 200 Nos. each 19.84
10 Plunger Plate 200 Nos. each 30.85
11 Follower Plate 200 Nos. each 30.85
12 Cup Seal 600 Nos. each ###0.99
13 Check Valve 800 Nos. each 13.45
14 Check valve guide 800 Nos. each 27
15 Rubber gasket 800 Nos. each 15.95
16 Hexa bolt M12 x1.75 -65MM Long 6000 Nos. each 7.9
17 Hexa nut M12 x1.75 6000 Nos. each 2.9
18 Spring Washer 1500 Nos. each 1.45
19 Cir clip 1500 Nos. each 1
Cost of spare parts for 1018 nos. T/well.
Executive Engineer
P. H. Division, Gopalganj
Sub Estimate no. 3
Estimate - For requirement of spare parts for repairs and maintenance of Ordinary Well Hand Pump (Ordinary No-06 )
Nos. of Ordinary hand pump requiring repair 2025 Nos.
SI. Particulars of materials Qty Required for Repair work Unit Rate (In Rs.) Amount (In Rs.)
1 C.I Barrel (Wt.Not less than 14 kg) 60 Nos. each 770
2 C.I Handle (Wt.Not less than 5 kg) 120 Nos. each 247.5
3 C.I Plunger (Wt.Not less than 700 g) 80 Nos. each 49.5
4 C.I Base (Wt.Not less than 4.5 kg) 70 Nos. each ###0.99
5 C.I Head Cover (Wt.Not less than 4.5 kg) 70 Nos. each 247.5
6 C.I Weight valve 600 Nos. each 6.74
7 90mm leather Bucket 2000 Nos. each 31.26
8 Leather Flap Valve 2000 Nos. each 20.9
G.I Nut & Bolt 1000 Nos. each 1
9 Nut & Bolts @1.5 kg / H.P
a 12mm x 90mm Long 339 kg each ###0.00
b 12mm x 65mm Long 943 kg each ###0.00
c 10mm x 65mm Long 503 kg each ###0.00
d 10mm x 50mm Long 101 kg each ###0.00
Cost of spare parts for 1257 nos. T/well.
Executive Engineer
P. H. Division, Gopalganj
GOVERNMENT OF BIHAR
Public Health Engineering Department
PUBLIC HEALTH DIVISION, GOPALGANJ
B.O.Q. FOR THE WORK- Construction of 125mm X 40mm dia X 61 meter deep hand operated T/well with India Mark II Hand Pump with Platform and drain with Soak pit in Due to heat and heat wave conditions and falling water level in the districts of Gopalganj under P. H. Division, Gopalganj for the year 2026-27. Total Nos 50
Date of Tender :- 2026-10-04T00:00:00Z
Estimated Cost:- 4672200
Earnest Money (In specified shape only):- 93500
Time of Completion :- 3 Month
Cost of BOQ :- Rs. 5000.00 (As per Online)
BSEDC Processing Fee :- Rs. 590.00 (As per Online)
B.O.Q. FOR THE WORK- Construction of 125mm X 40mm dia X 61 meter deep hand operated T/well with India Mark II Hand Pump with Platform and drain with Soak pit in Due to heat and heat wave conditions and falling water level in the districts of Gopalganj under P. H. Division, Gopalganj for the year 2026-27
Sr. No. Particulars Quantity Unit Rate Amount
1 Construction of 125mm X 40mm dia X 61 meter deep hand operated T/well with India Mark II Hand Pump with 1.85 mtr dia circular PCC Platform and 3.0 mtr long PCC drain in heat and heat wave conditions and falling water level in the district of Gopalganj under P. H. Division, Gopalganj for the year 2025-26 (as per Sub Estimated- 1) 50 Nos. Each 85041.26
2 Construction of 1.0m dia. and 2.0 metre deep Soak Pit with dry brick honey comb shaft with 100B bricks near Newly Constructed 50 Nos Hand Pumps under P.H Division Gopalganj 2025-26 (as per Sub Estimated- 2) 50 Nos. Each "R1."\ #,##0.00_);\("R1."\ #,##0.00\)
Executive Engineer
P.H. Division, GOPALGANJ
SCHEDULE - B …………………… NIL
SCHEDULE- C …………………….. NIL
Executive Engineer
P.H. Division, GOPALGANJ
1 Estimated cost (in Rs.) :-
2 Cost of Govt. Material :- NIL
3 Permissible limit. :-
4 Name of the Contractor :-
5 Address of the Contractor :-
6 I/we offer in Figures……. in words………………… % (Percentage) High / Less/Estimated rate mentioned in the Bill of quantity. IN FIG.
Executive Engineer, P.H.Division, GOPALGANJ
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
NIT_2R1.pdf
NIT • 0.78 MB
Financial_NIT_2R1.xls
NIT • 0.10 MB
NIT_2R1.pdf
NIT • 0.78 MB
Paper_Cutting_2R1.jpeg
NIT • 0.10 MB
Technical_NIT_2R1.xls
NIT • 0.09 MB
Notes_To_Tender_2R1.pdf
NIT • 2.22 MB
Financial_NIT_2R1.xls
NIT • 0.10 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].