15/BSNL/CD-FBR/CHN/2025-26

Amount

Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of:

Asbestos cement sheet

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /seIf tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Removing the Toughened Glass door at the of the IQ floor Entrance and after repair, refixing the same including providing new floor spring such as Everite or equivalent as directed.

Removing the aluminium Windows shutter from its position and refixing the same with the existing Two track bottom after providing the new PVC sliding wheels,rubber gasket, locking arrangement including allignment of shutters to make the it functionable as decided and directed bt the Eng-in- charge. (Rate per window)

Charges for repairs to existing cycle shed truss work by Cutting of existing damaged,bent up sections at the bottom upto required height by using gas cutting machine ,and fixing the new necessary steel sections at bottom including making good the surface by Grinding,Welding etc complete and concreting with CC 1:2;4 as directed by Engineer in charge.

Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :

Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete :

Providing and fixing stainless steel handles for doors with necessary screws etc. complete :

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessaryaccessories and screws etc. complete.

Providing and fixing stainless steel kitchen sink with rubber plug, 40mm Cp brass waste complete over the existing kitchen worktop including cutting and making good the etc. complete.

Size 600mm x 400mm x 150mm

Charges for servicing the available floor spring to make it functionable incuding removing and refixing the door after necessary repairing as directed.

Providing and fixing stainless steel grating of approved quality and colour

Circular type 100mm dia

Transportation charges for shifting of Aluminium materials ,particle boards,glazing etc, carefully upto floor v level from various sources as decided and directed by Eng-in-charge.

Easening of wooden doors/window shutters of all sizes without removing the shutter, to size the sides/ rebate and tightening the hinges etc. by carpenter tools to give a smooth operation.

Doors

Providing and fixing partition works with available aluminium sections, prelaminated particle boards,Bison boards and Glass panels in panelling supplied departmentally with necessary new expansion hold fastners, screws,clips etc. including necessary filling up of gaps at junctions, top,bottom etc.all as directed by the Eng-in-charge.

Levelling the false ceiling of aluminium work in proper allignment consisting of tee/ angle sections with necessary new GI Suspended rods and sections,boards supplied departmentally in frames of false ceiling including aluminium angle cleats with necessary C.P. brass/ stainless steel with screws including making good the available bendup sections into serviceable condition etc.all complete as per approved architectural drawings and direction of the Engineer-in-charge.

Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. A)Bend 87.5°

110 mm bend

French spirit polishing :

Two or more coats on old works including a coat of wood filler.

Providing and fixing White vitreous china washbasin with fisher bolts including making all connections ,PTMT waste coupling,PTMT ornamental pillar cock,pvc connection pipe and pvc waste pipe of 40mm dia as directed..

Flat back wash basin of size 450x300 mm

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :

W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete :

White solid plastic seat with lid

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.

One coat.

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre. of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.

One coat.

Baiiing out of seewage water from the septic tank including removal of sludge by the seewage lorry as directed

Providing and fixing stainless steel pipe of required length for curtain rods with brackets at both ends.

20mm heavy type

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge.