Maintenance/ Improvement/ Repair / laying and fitting of pipes for extension / restoration of water supplies of various water supply Schemes in Sumb and Goran Section

Amount

Earthwork in excavation by manual means in trenches for foundations, drains, pipes, cables etc ( not exceeding 1.5 M in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan ,depth upto 1.5 Mt including disposal of excavated earth upto 1 Mtr from cutting edges, disposed earth to be levelled and neatly dressed in . All kinds of soil.

Earth work in excavation by Mechanical means (Hydraulic excavator) in foundations drains, pipes and cables etc (not exceeding 1.5 M in width or 10 sqm on plan ) trenches including dressing of sides and ramming of bottoms lift upto 1.5 m including getting out excavated soil and disposal of surplus soil as directed within lead of 50 M . All kinds of soil.

Dismentling manualy /Mechanically including stacking of serviceable material and disposal of unserviceable material within 50 Meter lead i) Bituminous road

ii) Water Bound Macadam Road.

Dismantling tile work in floors and roof laid in cement mortar including stacking material with in 50 Meteres lead a) For Thickness of tiles 10 mm to 25 mm

b) For thickness of tiles above 25 mm and upto 40 mm.

Demolishing cement concrete manually/ by mechanical means including disposal of material in with 50 mtrs lead a) 1: 3: 6 or richer mix.

b) 1:4:8 Leaner mix.

Laying and fitting of GI pipes complete excluding cost of pipes and earth work a) 15 mm dia

b) 20 mm dia.

c) 25 mm dia

d) 32 mm dia.

e) 40 mm dia.

f) 50 mm dia.

g) 65 mm dia.

h) i) 80 mm dia ( L )

ii) 80 mm dia ( M )

i) 100 mm dia ( L )

ii)100 mm dia ( M)

i) 150 mm dia ( L)

ii)150 mm dia ( M)

Providing and fixing of GI pipes complete with G.I fittings excluding tenching and refilling etc. ( external work) a) 15 mm dia

b) 20 mm dia.

c) 25 mm dia

d) 32 mm dia.

e) 40 mm dia.

f) 50 mm dia.

g) 65 mm dia.

h) i) 80 mm dia ( L )

ii) 80 mm dia ( M )

i) 100 mm dia ( L )

ii)100 mm dia ( M)

ii)150 mm dia ( M)

Laying S & S centrigugaly cast (Spun) Ductile Iron/ MS Pipe. a) 100 mm dia D.I. Class K-7 pipes (Rate to be quoted by the contractor)

b) 150 mm dia D.I. Class K-7 pipes (Rate to be quoted by the contractor)

c) 200 mm dia

d) 250 mm dia

e) 300 mm dia

f) 350 mm dia.

g) 400 mm dia

h) 450 mm dia

i) 500 mm dia

j) 600 mm dia

Fabrication of joints GI/ DI/ MS (complete Job) and involves the following items., Earth work excavation, Cutting of pipes with hack-saw, Refilling of excavated earth 90% Earth work item, Disposal of unserviceable material within 500 m by head load, Demolition of concrete/ Tiles/ Bituminious / WBM a) 25 mm dia to 50 mm dia.

b) 65 mm dia to 100 mm dia.

c) 125 mm dia to 150 mm dia.

d) 200 mm dia.

e) 250 mm dia.

f) 300 mm dia.

g) 350 mm to 450 mm dia.

h) 500 mm to 600 mm dia

Dismantling GI pipes (External work) including excavation and refilling after taking out the pipes, manually/ by mechanical means including stacking of pipes with in 50 Mtrs lead., a) 15mm to 40 mm dia nominal bore

b) Above 40 mm nominal bore.

Dismantling CI pipes including excavation and refilling trenches after taking out the pipes manually by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes and lead at site with 50 Mtrs lead as per direction of Engineer incharge a) Upto 150 mm dia..

b) Above 150 mm to 300 mm dia/

c) Above 300 mm dia.

Providing lead caulked joints to spun iron or C.I and specials including testing of joints but including the cost of pig lead a) 100 mm dia.

b) 125 mm dia.

c) 150 mm dia.

d) 200 mm dia.

e) 250 mm dia

f) 300 mm dia.

g) 400 mm dia.

h) 450 mm dia.

i) 500 mm dia.

j) 600 mm dia.

Filling available excavated earth (excluding rock ) in trenches, plinth sides of foundation etc. Layers not exceeding 20 cm in depth, consolidating each deposited layers lead upto 50 M and lift upto 1.5 M

Disposal of surplus excavated earth complete Job upto 1 Km by Mech Transport ( Carriage)

Chequrred precast cement concrete tiles 22 mm thick in footpath and courtyard jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and clearing etc. complete on 20 mm thick bed of cement mortar 1: 4 (1 cement: 4 coarse sand) excluding cost of tiles. a) Ordinary cement without any pigment,

Supply of Fitter/ Mazdoor/ Mason etc. i) Supply of Fitter ( 2nd class)

ii) Supplyof Labour (Mazdoor)

iii) Supply of Masson a) Ist Class

iv) 2nd Class

Providing push on joints to centrifugally (spun) cast- Iron pipes or Ductile Iron Pipes including testing including the cost of rubber gasket a) 100 mm dia.

b) 150 mm dia.

c) 200 mm dia.

d) 250 mm dia.

e) 300 mm dia.

f) 350 mm dia.

g) 400 mm dia.

h) 450 mm dia.

i) 500 mm dia.

j) 600 mm dia

Laying in position S & S or flanged CI special such as Tees bends, collars, tappers and caps etc (excluding cost of specials).

Locating/ Tracing of blockages/ leakages including excavation of pits.

Carriage of department material from Divisional store to site of work average distance 10 Kms by Mechanical Transport (Paid as per actual distance in volved at site shall be paid as per S.S. of rates 2020). a) G.I.Pipe and fitting.

b) Cement

c) Steel.

Carriage of pipe avg. 10 Kmt by M T Ductile Iron/ M.S.Pipes/ j) 100 mm dia.

ii) 150 mm dia.

iii) 200 mm dia.

iv) 250 mm dia.

v) 300 mm dia

vi) 350 mm dia

vii) 400 mm dia.

viii) 450 mm dia

ix) 500 mm dia

x) 600 mm dia to 800 mm dia

Carriage of Departmental material from stacking place to site of work average 200 Mtrs by Head Load ( Paid as per actual distance involved at site) a) G.I.Pipe and fitting.

b) Cement

c) Steel.

Replacement of C.I sluice valves/Check valves complete with bolts,nuts,rubber insertions etc.(sluice valves/Check valves to be supplied by the Department) 200mm dia

150 mm dia

100 mm dia

80 mm dia

65mm dia

50mm dia

Fixing /Replacement of GM Gate valves/Brass stop cocks complete(Gate valves/stop cocks toi be supplied by the department) including bends,collars,unions and other allied items 150mm dia

100mm dia

80mm dia

65mm dia

50mm dia

40mm dia

25mm dia

20mm dia

Making connection of G.I distribution branch with G.I main of following sizes by providing and fixing Tee,including cutting and threading the pipe etc. complete 25 to 40mm nominal bore

50 to 80mm niminal bore

Carriage of D.I/M.S pipe from stacking site of work avg. 200 mtr by head load. Ductile Iron/ MS Pipes. i) 100 mm dia.

ii) 150 mm dia.

iii) 200 mm dia.

iv) 250 mm dia

v) 300 mm dia.

vi) 350 mm dia.

vii) 400 mm dia.

viii) 450 mm dia and 500 mm dia.

ix) 600 mm dia ,700 mm dia , 750 mm dia and 800 mm dia.

Clearing jungle including uprooting of rank vegetation, grass, brushwood, trees and saplings of girth upto 30 cm measured at height of 1 M above ground level and removal of rubbish upto 1 distance of 50 m outside the periphery of the area cleared.

Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering-all work upto plinth level 1:3:6 (1 cement: 3 coarse sand 6 Graded stone aggregate of 20 mm nominal size) (Crushed)

Demolishing dry brick pitching in floors,drains etc. including stacking serviceable material and disposal of unserviceable material with in 50 meters lead

Dry brick on edge flooring with bricks of class designation 75 on a bed of 12mm cement mortar including filling joints with fine sand (1:4mix) ( with F.P.S bricks)

Brick work with common burnt clay FPS (non-modualar) bricks of class designation 75 in foundation and plinth in: a) Cement Mortar 1:4 (1 cement : 4 coarse sand)

b) Cement mortar 1: 6 (1 cement: 6 coarse sand)

Half Brick masonry with bricks of class designation 75 in foundation and plinth in:- Cement Mortar 1:4 (1 cement : 4 coarse sand)

Providing and laying in position cement concrete excluding the cost of centring , shuttering, finishing all work upto plinth level (1: 4: 8) 1. Cement : 4 coarse sand 8 Graded stone aggregate 40mm nominal size) crushed.

Dry stone pitching 225 mm thickness including cost of stone and preparation of surface “Nallah”.

Dry stone pitching (any thickness) excluding cost of stones:- a) On Horizontal

b) On Top copings of banks

c) On Slopes.

Hand packing stones in wire-crates, excluding cost of crates and stones.

Grouting of stone pitching using M-10 nominal mix concrete (max size of aggregate 20 mm nominal) @ 3.65 cum per 100 sqm on horizontal/ side slopes,complete including curing (Nallah)

Dumping of stone (excluding cost of stone) in horizontal on level.

supply of boulders (nallah) nominal size 225 mm (stack measurement reduced by 15%)

Demolishing Brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. In cement mortar

Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 M (stacks of cleaned bricks shall be measured) from brick work in cement mortar,

Silt clearance from canals, inclusive of initial lead and lift (50 m and 1.5 m respectively a)Dry

Slip clearance in soils; mixed with moorum/ kankar/ shingle/ boulders, disposal lead upto 50 M and lift upto 1.5 M

Carriage of sand, Bajri, stones bricks/ tiles from nearest source to site of work incl. loading, unloading and stacking complete (To be paid as per actual distance involved at site) a) Sand average distance 10 Km by MT

b) Bajri above 40 mm average distance 10 Km by M.T.

c) Bajri Below 40 mm average distance 10 KM by M.T.

d) Stones average distance 10 Km by Mech. Transport.

e) Bricks average distance of 10 Km by Mech, transport.

f) Tiles average distance of 10 km by Mech. Transport.

Carriage of material from stacking place to site of work average 200m by Head Load. a) Sand.

b) Bajri below 40 mm.

c) Stone aggregate 40 mm and above.

d) Stones.

e) Bricks.

f) Brick Tiles

Carraige of Alum from site of stacking up to bed of filtration plant by way of engaging labour

Clearance of GSR/ST/Dug well/OHT/Intake Tank by way of deploying labour and disposal of rubbish as per direction of Engineer-in- charge

Providing and laying cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate ) All works upto plinth level

Providing and laying cement concrete 1:1.5:3 a)Walls,

b)Slabs

Reinforcement of RCC

Repair of pipe of different dia incl. cost of material and earth work if required

Whitewashing one or more coat on old work

Welding with Gen Set

Minor repair of bathroom

Form work a) wall

b) Suspended floor/ roof

c) Edges of slab

d) Foundations

RCC 1:1.5:3 all work upto plinth level

6 mm plaster on cement concrete or RCC work with whoite cement based polymer mofified self curing mortar of approved make as per directions of Engineer-In- Charge

Removing white colour wash by scraping and sand papering and preparing the surface smooth incl. necessary repairs to scratches etc. complete.

Distempering with dry distemper of approved brand and manufacture (one or more coats) and of required shade on old work to give an even shade.

Painting with oil type wood preseroative of approved brand and manufacture an old work (one or more coat)

Renewing glass planes with putty and nail wherever necessary incl. taking out old putty float glass panes of thickness 4.0 mm

Repair to plaster thickness 12mm to 20 mm in patches of area 2.5 sqm incl. cutting patches in proper shape and plastering wall surface with white cement polymer self curing incl. disposal of rubbish. All complete

Loading unloading of material by way of engaging labour

Barricading by way of fitting of G.I. pipes (20mm to 50mm)

Repair of gate by way of weldiing and other material required

Engagement of sweeper

Opening of old wire crates and rebinding after filling

Earth work filling by JCB

Hand packing stone in wire crate excluding cost of crates and stones

Providing and fixing of check valve: a)100 mm dia

b) 80 mm dia

c) 65 mm dia

Providing and fixing of Sluice valve: a)100 mm dia

b) 80 mm dia

c) 65 mm dia

d) 50 mm dia

Providing and fixing of gun metal gate valve: a) 65 mm dia

b) 50 mm dia

c) 40 mm dia

d) 32 mm dia

e) 25 mm dia

f) 20 mm dia

Support Activity: Awaring people by printing of flexes, recording of Audio, Video song complete Job, for educating people in Samba District, organising seminar and providing refreshment etc complete job for invited people , DDC Chairman, BDC Chairman and all members. Seminar meeting and taking audio video, photography, printing of pamphlet and literature for delivery to the attending audience and oil for generator ( 10 Ltrs.) and hiring vehicle as Jal Rath Complete job on turn key basis

Sanjeev Singh