Balance work of Agro Mall transformation into MC office Complex under MC Panipat

PandF Contactor as per NS MNX 25 Make: Indo Asian/Havells/Crompton/ L and T/C and S

Supplying and fixing of Hose Cabinet of size 750 mm x 600 mm x 250 mm made of 1.6 mm thick MS sheet with 6 mm thick glazed glass doors including necessary locking arrangement suitable to accommodate external hydrant with butterfly valve, 2 Nos 15 Mtr. Long Hose pipe, 1 No. branch pipe, mounted on wall OR raised brick platform and duly painted with post office red externally and white internally with synthetic enamel paint complete in all respect, for external hydrant, as required.

Supply and Fixing ISI marked ( IS : 15683 ) Portable fire Extinguisher, Carbon-dioxide type flat base including valve, discharge hose of not less than 10 mm dia. min. 600 mm long and complete in all respects including initial fill with C02 gas confirming to IS:307- 1966 filled to a filling ratio of not more than 0.667and wall suspension bracket. Capacity 4.5 Kg.

Supply, Installation, testing and commissioning of Hi Wall mounted type / Ceiling Concealed type / Floor mounted type /Ductable type indoor units having galvanized steel plate casing. The unit shall be insulated with sound absorbing thermal insulation material, Polystyrene / Polyethylene foam. The unit shall be supplied with suitable decorative panel and resin net filter with Mold resistance. The unit shall be supplied with drain hose, clamp metal, washer fixing plate, sealing pads, screws, clamps, washer for hanging bracket and insulation for fitting. 8.0 TR/3595 CMH Ductable Unit

Supply, Installation, testing and commissioning of Hi Wall mounted type / Ceiling Concealed type / Floor mounted type /Ductable type indoor units having galvanized steel plate casing. The unit shall be insulated with sound absorbing thermal insulation material, Polystyrene / Polyethylene foam. The unit shall be supplied with suitable decorative panel and resin net filter with Mold resistance. The unit shall be supplied with drain hose, clamp metal, washer fixing plate, sealing pads, screws, clamps, washer for hanging bracket and insulation for fitting. 2 TR/1031 CMH Cassette Unit (Including cordless remote controller)

Supply, Installation, testing and commissioning of Hi Wall mounted type / Ceiling Concealed type / Floor mounted type /Ductable type indoor units having galvanized steel plate casing. The unit shall be insulated with sound absorbing thermal insulation material, Polystyrene / Polyethylene foam. The unit shall be supplied with suitable decorative panel and resin net filter with Mold resistance. The unit shall be supplied with drain hose, clamp metal, washer fixing plate, sealing pads, screws, clamps, washer for hanging bracket and insulation for fitting. 2.5 TR/1236 CMH Cassette Unit (Including cordless remote controller)

Supply, Installation, testing and commissioning of Hi Wall mounted type / Ceiling Concealed type / Floor mounted type /Ductable type indoor units having galvanized steel plate casing. The unit shall be insulated with sound absorbing thermal insulation material, Polystyrene / Polyethylene foam. The unit shall be supplied with suitable decorative panel and resin net filter with Mold resistance. The unit shall be supplied with drain hose, clamp metal, washer fixing plate, sealing pads, screws, clamps, washer for hanging bracket and insulation for fitting. 1.5 TR /860 CMH Hi-wall Split Unit (Including cordless remote controller)

Supply and Installation of suction and discharge Seamless heavy gauge Copper piping of adequate size duly insulated with 19mm / 13mm thk. Nitrile Rubber Insulation. Refrigeration piping will have to be taken in the piping rack / Support / Cable Tray individually connecting to all indoor units for the respective floors. Pipe work shall include Even necessary connections, tees, reducers, supports, clamps, fittings, valves and ref. joints (Y joints) where ever required will be included. 6.4mm dia

Supply and Installation of suction and discharge Seamless heavy gauge Copper piping of adequate size duly insulated with 19mm / 13mm thk. Nitrile Rubber Insulation. Refrigeration piping will have to be taken in the piping rack / Support / Cable Tray individually connecting to all indoor units for the respective floors. Pipe work shall include Even necessary connections, tees, reducers, supports, clamps, fittings, valves and ref. joints (Y joints) where ever required will be included. 9.5mm dia

Supply and Installation of suction and discharge Seamless heavy gauge Copper piping of adequate size duly insulated with 19mm / 13mm thk. Nitrile Rubber Insulation. Refrigeration piping will have to be taken in the piping rack / Support / Cable Tray individually connecting to all indoor units for the respective floors. Pipe work shall include Even necessary connections, tees, reducers, supports, clamps, fittings, valves and ref. joints (Y joints) where ever required will be included. 12.7mm dia

Supply and Installation of suction and discharge Seamless heavy gauge Copper piping of adequate size duly insulated with 19mm / 13mm thk. Nitrile Rubber Insulation. Refrigeration piping will have to be taken in the piping rack / Support / Cable Tray individually connecting to all indoor units for the respective floors. Pipe work shall include Even necessary connections, tees, reducers, supports, clamps, fittings, valves and ref. joints (Y joints) where ever required will be included. 44.5mm dia

Refrigerant R 410 gas for excess Copper Piping for all circuits for entire system.

Supply and Laying of copper shielded armoured Communication/Control Cabling with end termination between Outdoor Units and Indoor Units, Communication cabling between the individual controllers to the main central controller with PVC conduits or Cable Trays if required, necessary supports, Plug Top, Earthing connection etc. as per site requirement in an approved manner complete as per Technical Specifications and drawing.

Providing and fixing in position the following Rigid PVC condensate drain pipes cut to required lengths and necessary elbows, tees and reducers, hanger, supports, fittings and with 9 mm thk. Nitrile Rubber Insulation as per drawing. Quoted price shall be inclusive of adhesive, nitrile rubber tape etc. as per specification and drawing. 32mm dia

Supply, fabrication, Installation, and testing of sheet metal ducts complete with all accessories like flanges, all necessary MS supports with epoxy Painting, suspension rods , anchor bolts, GI bolts and nuts, canvas connections , adjustable splitter , guide vanes including air balancing with necessary connections etc., in accordance with the approved shop drawings and as per the specifications : 24 G galvanized sheet steel

Supply, fabrication, Installation, and testing of sheet metal ducts complete with all accessories like flanges, all necessary MS supports with epoxy Painting, suspension rods , anchor bolts, GI bolts and nuts, canvas connections , adjustable splitter , guide vanes including air balancing with necessary connections etc., in accordance with the approved shop drawings and as per the specifications : 22 G galvanized sheet steel

Supply, fabrication, Installation and testing of flexible connections constructed of flexible double canvas sleeve with necessary mounting arrangement, flanges, nuts and bolts etc. in accordance with approved shop drawings and as per the specifications Refrigerant R 410 gas for excess Copper Piping for all circuits for entire system.

Supply, Installation, testing and balancing of Supply Air Duct dampers fabricated from G.I Sheet, duly painted with synthetic enamel paint and to be provided with suitable links and quadrants for control of volume of air. in accordance with the approved shop drawings and specifications.

Supply and Installation of GSS Louvers with bird screen, adjustable damper for fresh air and without damper for exhaust air complete with aluminum wire mesh bird screen in accordance with the approved shop drawings and specifications.

Supplying, Installing, Testing and Commissioning of extruded aluminum powder coated exhaust grilles 0/15/45 degree blade angle of approved shade and make as per specifications including any framework required for fixing of linear grilles.

Powder coated, extruded aluminium Diffuser in as required and as shown in the drawings. With Damper

Powder coated, extruded aluminium Diffuser in as required and as shown in the drawings. Without Damper

Supply, Installation and Balancing of opposed blade box type volume control dampers in Supply air duct collars as per approved drawings and specifications.

Supply and Installation of Thermal insulation On supply air ducting externally with 13 mm thick Nitrile Insulation with Al. foil having density between 40 to 60 kg/m3 as per approved drawing and specifications. Quoted price shall be inclusive of adhesive, tapes as per specification

`Supply, installing, testing, commissioning and handing over of Axial Fans (min. efficiency 70%) with MS Supports structure to suspend from ceiling sound level - 70db (A) @ 3mtr w/o silencers (The cost of FAN Motor Starter Panel with BMS Connectivity complete with necessary control, indicating OLP.SPP, ON/OFF push Buttons with ON indication, 2 nos, Non Polarised NO-NC contacts for tripping on signal from Fire Dampers/Fire Alarm Panel with all required accessories should also be included in the quoted Price with required cable from starter panel to Fan with max. length of cable considered up to 15 mtr. with end termination. Extra length of cable will be paid as per BOQ rate.) ` Capacity- 8000 CFM - 30 mm TSP

Supply, installing, testing, commissioning and handing over of Inline Fans with necesssary cabling : 1000 CFM, 20 mm SP

Supply, installing, testing, commissioning and handing over of Inline Fans with necesssary cabling : 700 CFM, 20 mm SP

Supply, installing, testing, commissioning and handing over of Inline Fans with necesssary cabling : 550 CFM, 20 mm SP

Supply, installing, testing, commissioning and handing over of Propeller Fans with necesssary cabling : 200 CFM

Supply, fabrication, Installation, and testing of sheet metal ducts complete with all accessories like flanges, all necessary MS supports with epoxy Painting, suspension rods , anchor bolts, GI bolts and nuts, canvas connections , adjustable splitter , guide vanes including air balancing with necessary connections etc., in accordance with the approved shop drawings and as per the specifications : 20 G galvanized sheet steels

Supply, installation, testing and commissioning of R410/R407Condensing unit of 8.5 TR.

Supply and Installation of suction and discharge Seamless heavy gauge Copper piping of adequate size duly insulated with 13 mm thick

Supply,, Installation, testing and commissioning of Compact Air Cooled type outdoor units of VRV system having hermetically sealed scroll type compressors and separate 1# inverter compressor, condenser coil fabricated from Seamless Copper tube and Plate type Al. Fins of Multi Row with “Anti Corrosive” treatment (Blue Fins), Axial Flow, upward throw condenser fan, Condenser fan - motor unit, insulated refrigeration piping, power / control wiring, and earthing, external wiring between Indoor and Outdoor units, all system controls-safety. The outdoor unit shall be pre charged with first charge of R 410A refrigerant. etc. complete as per Technical Specifications and drawing. Each Outdoor units with High Pressure switch, Fan driver overload protector, Over current relay, Inverter Overload Protector and Fusible Plug. The unit shall be suitable for 415 ± 10 % volts, 50 Hz, 3 phase AC supply, and IP 55 protection. 30 HP

SITC of DIN Type Astronomical Digital Time Switch with 1 CO: Astronomical programmable every 1 minute, backup of 6 years , 28 memory locations, currently capacity 16 Amp, with one changover, total 28 programs, 3 nos indication lamp with 1 nos toggle switch and 1 nos timer swicth with 5 years warrenty Make: LandT/Indi Asian/CandS

Removal Of old damaged ACP Pannels complete in all repsect.

Cleaning of glass outside of building

Providing and fixing vertical blinds made of vinyl fabric and Aluminum sliding hardware as per design, shade and pattern approved by Engineer In Charge (N.S.)

Providing and installation of steel acrylic composite words of required size with facing of stainless steel with 1 mm sheet thickness and sides of acrylic, including light fixtures and connection to the supply for night glow, complete in all respects as per satisfaction of the engineer in-charge

Providing and installation of acrylic colourfull MCP LOGO of required size withbacking of stainless steel with 1 mm sheet thickness

and sides and front of acrylic, including light fixtures and connection to the supply for night glow, complete in all respects as per satisfaction of the engineer in-charge

Supplying, Installation, Testing and Commissioning of Local Fire authority approved Electric Driven Main fire pump for Sprinkler / Hydrant applications suitable for automatic operation and consisting of following details given as A, B, C, D, E, F and G .(A) Horizontal Single / Multi stage Centrifugal End suction, back pull type pump complete for delivery of below mentioned discharge , with necessary Butterfly valve on the suction side ( all items to be matching with the suction side dia of the pump) and pressure gauge ,Butterfly valve and non return valve on the delivery side side ( all items to be matching with the delivery side dia of the pump) and including bypass arrangement for Testing of pump (B) Material of construction : Pump Casing - Cast Iron, Impellor - Bronze, Shaft - SS 410, Packing - Mechanical Seal (C)Pump shall be capable of furnishing not less than 150 % of rated capacity at a head not less than 65 % of the rated head. The shut off head shall not exceed 120 % of rated head (D) Squirrel cage induction motor suitable for 3 phase, 415 V, 50 HZ, Ac supply 2900 / 1450 RPM T.E.F.C confirming to IP:55 , of required HP suitable for the above pump ,along with flexible coupling , coupling guard complete in all respect . ( E) Common bed plate fabricated from mild steel channel for installation of pump and Motor (F) Pump is to be inspected by third party like RITES / PDIL at manufacturer`s premises and inspection report is to be submitted. (G) Suitable cement concreat foundation duly plastered with anti vibration pads.

Supplying, fixing, testing commissioning of butterfly valve PN 1.6, with Bronze/ Gunmetal seat duly ISI marked complete with Nuts, Bolts, washers, gaskets, conforming to IS 13095, of following sizes as required.

Supply and Fixing ISI marked ( IS : 15683 ) Portable Fire Exitnguisher, ABC type,finished externally with red enamel paint, complete in all respects including initial fill and wall suspension of following capacity. 6 kg

Providing, laying, testing and Commissioning of `C` class heavy duty MS pipe conforming to IS 3589 / 1239 for hydrent and sprinkler applications including fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. fixing the pipe on the wall/ceiling with suitable clamps and including painting of two coats of Red Oxide , painting with two or more coats of synthetic enamel paint of Post office red shade complete as required.The installation includes all civil openings ,breakages and making good the same. 200 mm dia, 6.0 mm thick

Supplying, installing, testing and commissioning of centrifugal submersible sump pumps, suitable for 415 ± 10% Volts, 3 phase/230 ±10% volts 50 Hz A.C. power supply. Each pump shall suitable for automatic/manual operation complete with control panel as per specification.Basement Storm Water (Sump) / Sewerage (2 Nos. 1 W plus 1 S) Flow rate = 4.0 LPS Head = 15 Mtrs. Solid Handling = 20mm

Supply, installation, testing and commissioning of 600X 600 mm LED Panel Light fixture made of Aluminum sheet channel 36 watts High efficiency 3800 lumens and high frequency replaceable digital ballast. Make: Crompton Greaves/Wipro/Bajaj/Phillips

Supply, installation, testing and commissioning of 1180 mm (nominalsize), 40 watt LED batten luminaire in aluminium housing with minimum light output 100 lumen/watt and Toatl system lumen )4000 lumen THD (20%, PF )0.95. The fixture shall be designed for a system life of 50,000 hours @ 70% lumen maintenance. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. complete with all accessories, electronic driver, diffuser, directly on ceiling/ wall, including connections and Make: Crompton Greaves/Wipro/Bajaj/Phillips

Supply of Wall Fan 16` Sweep ( 400mm)oscilating pipe light duty complete with built-in regulater, blade, jali etc. .Make:- as per HPHC approved Brand List WITHOUT GST

Supplying of 200 W LED Flood light luminaire, housing made up of dieOptic Lenses, toughened glass cover and mounting bracket. The fixture should have a minimum system efficacy of 120 lumen/Watt, ingress Protection of IP66 and Mechanical Impact Resistance Rating of IK )=07. The fixture driver should have an operating voltage range of 140-270 V, surge protection of )=10KV, PF )0.9, THD (10%. The fixture shall be designed for a system life of 50,000 hours @ 70%lumen maintenance.LM 79 and LM80 reports need to be submitted from a NABL/ULaccredited lab to verify above parameters. (Make-Phillips / Havells/Wipro /Crompton/ Bajaj).

SITC of 45 Wattage LED lights with 5 years warranty Driver shall be fully potted and should have a power factor )=0.95, and THD ( 10% with minimum inbuilt surge protection of internal 4kV / amp: external 10kV. The driver should be suitable for an operating voltage range of 140- 270V AC, cut-off at ( 300V ?C, and self-restore. The driver should sustain up to 8 hours at 440 V A?.

90 Wattage LED lights with 5 years warranty

Supply installation testing and commissioning of RACK 9 U SERVER complete in all respect as per satisfaction of Engineer In-charge Make: Honeywell or Pelco or Axis or D-link

Supply installation testing and commissioning of Dlink Patch Pannel 24 Ports Fully Loaded complete in all respect as per satisfaction of Engineer In-charge Make: Honeywell or Pelco or Axis or D-link

Supply installation testing and commissioning of Dlink Patch Cord 1 MTR complete in all respect as per satisfaction of Engineer In-charge Make: Honeywell or Pelco or Axis or D-link

Supply installation testing and commissioning of DLINK 24 PORTS GIGABIT SWITCH complete in all respect as per satisfaction of Engineer In-charge Make: Honeywell or Pelco or Axis or D-link

Supply installation testing and commissioning of Manageable Switch 24 Port Mikrotik complete in all respect as per satisfaction of Engineer In-charge Make: Honeywell or Pelco or Axis or D-link

Supply installation testing and commissioning of electrical cable 2 core 1.5 mm complete in all respect as per satisfaction of Engineer In-charge Make: Honeywell or Pelco or Axis or D-link

Supply installation testing and commissioning of Epabx Intercom system-200 LINES complete in all respect as per satisfaction of Engineer In-charge Make: Honeywell or Pelco or Axis or D-link

Supply installation testing and commissioning of Display Intercom Devices complete in all respect as per satisfaction of Engineer In-charge Make: Honeywell or Pelco or Axis or D-link

Supply installation testing and commissioning of Dlink I/O For Networking RJ-45 complete in all respect as per satisfaction of Engineer In-charge Make: Honeywell or Pelco or Axis or D-link

Supply installation testing and commissioning of Dlink I/O For Intercom RJ-11 complete in all respect as per satisfaction of Engineer In-charge Make: Honeywell or Pelco or Axis or D-link

Supply and Erection of water cooler SP body with 150 ltr /hr and 150 ltr storage capacity, complete with all labour and petty material required i/c making necessary connections upto entire staisfaction of Engineer-in-Charge o

Supply and erection of 25 Ltr. commercial RO plus UV, Fully automatic with auto cut off RO plus UV Water Purification system 25 ltr/ hr capacity complete with all labour and petty material required i/c making necessary connections upto entire satisfaction of Engineer-in-Charge of the work.

Providing and Fixing of Pictorial layout plan of size 900mmx600mm as approved design, made of 3mm thick acrylic non glare base plate and non glare cut out symbols with grade One Braille on which individual facility points, like inquiry, reception, restrooms, medical room/ first aid, cafeteria or breakout area, lounge, meeting room, conference room etc. present the respective floors with pictograph wherever needed all in tactile raised by minimum of 1to2 mm in

various colours to make it legible for seniors, partial vision impaired etc. All the facility names should be in Braille, along with English or Hindi.The entire block of tactile signs should be mounted on wall or on a slant/ inclined frame for easy reading. The map to be installed at specified locations and installed at a height of 800mm from ground level complete in all respect as per Harmonized guideline and satisfaction of Engineer-in-charges. (N.S)

Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange and landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required

20mm Rock Fiber False Ceiling (Bio-Safe):Providing and fixing Rock Fiber (Bio-Safe) Acoustical (NRC 0.9- 0.95) Micro Look Edge False Ceiling Tile of size 595X595X20 mm of approved texture, design and pattern. Rock Wool Tile should have Acoustical Tissue Paper on the top face and Harden edge to achieve NRC upto 0.95 as per ASTMC423/ISO354. The tiles should have Anti Bacterial coating and Passed the Test Method as per JIS Z 2801: 2010, Should passed resistance to fungal attack test as per ASTM: G21-15. Relative Humidity (RH) more than 85%, Fire Performance as per Vertical flammability test (UL94) Classification V1 (Flame extinguishes within 30 seconds with no dripping) in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.30 mm thick (galvanized @120 GSM) comprising of main T runners of 15x32 mm (Centre Black) of length 3000 mm, cross T of size 15x32mm (Centre Black) of length 1200 mm and secondary intermediate cross T of size 15x32 mm (Centre Black) of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80GSM) 50 mm long 8mm outer diameter M-6 dashfasteners,4mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size 22x19x3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic raw l plug at 450 mm centre to centre and 40 mm long dry wall S.S. screws. The exposed bottom portion of all T- sections used in false ceiling support system shall be pre- painted with polyester baked paint, for all heights. (Supplier Company should be OEM and OEM Test Certificates will be required from contractor before billing of the item). The work shall be carried out as per specifications, drawings and as per directions of the Engineer-In-Charge. Make: Gyptech / Armstrong / Rockfon Hygienic Plus

Fabric Acoustical Wall Paneling (0.9NRC): Providing and fixing of Fabric Acoustical Wall Paneling with square edges made of Rockwool with Glass-wool Tissue substrate 25mm thick and wrapped on the front side with an acoustically transparent and fire-resistant fabric with an option of colors as per the choice of the Architect/ Engineering- in charge of size 600x1200 or 600x600 mm providing a minimum sound absorption level of 0.90 NRC. The GI Metal system includes G.I Stud having Size 48 mm X 36 mm X 34 mm X 0.50mm, length 3600mm, and Floor Channel Size 50 mm X 32 mm X 32 mm X 0.50 mm, length3600 mm is fastener vertically/ horizontally at every 600mm filled with 50mm 1000 GSM nonwoven thermal bonded polyester wadding. Then 8 mm HDMR perforated Board should be Screwed to the GI frame with the help of 25X 6 mm metal screw for pasting of 25mm thick fabric acoustical panel with the help of rubber base Adhesive as per drawing and design of Engineer-in Charge. (Original equipment manufacturer MTC along with NRC certificate would be required at the time of installation) Make: Gyptech / Armstrong /Gyproc Ecophon Master

Wooden Acoustical Wall Paneling/Slats Providing and fixing GI frame work for wall paneling as per design drawing consisting of floor channel of size 50x32x32 x0.5mm thick at bottom and top fixed with 35 mm nylon sleeves and 35 mm screw. Further fixing GI stud 48x34x36x0.5 mm thick @600mm C/C vertically. The framework to be filled with 50mm 1000 GSM non- woven thermal bonded polyester wadding. Finally fixing over it horizontally 80x26x51x0.5 mm thick G.I. ceiling section placed @600mm C/C or wherever required as per design drawings with dry wall screws and soffit cleats 27x37x25x1.6 mm as required. The frame to be fixed to the walls by means of angle hold fastener cleats of required size complete with required metal screw fixed on each vertical member @1000mm C/C etc. as required all complete as per the directions of Engineer- in-Charge. Tongue and Groove Wooden Acoustical Micro Perforated Laminated Panels of size - 190mm x 2440 mmx16mm, as per acoustic design / Architects’ approval, The grooved acoustic wall panels to be backed with black acoustic fleece facing one mm laminate as per the approved Shade/spec

ies and finish and a Melamine balancing layer over the reverse side. The density of HDMR board should be more Than 800kg/m3.The HDMR board should be passed through vertically flammability test (UL94) and should be tested as Anti-Fungal. The Panels with the help of special design G.I. clip as per Drawing and Design would be fixed on Aluminum Channel of size 15x25x19x7x.70mmx3000mm Horizontally/Vertically. (Leaping and Beading for corner and other finishing will be paid extra).(Original equipment manufacturer MTC with NRC certificates will be required on installation) Make: Gyptech /Armstrong/USG Boral/Knouff/Saint Gobain

Providing and laying Laminated wooden flooring 12 mm (AC4 grade) of approved make and as per approved sample, colour and laid on the existing levelled flooring with approved adhesive and underlay including skirting and profile etc. complete as per manufacturers specification and approval of Engineer-In-Charge. Flooring should have these properties:- Absorption class – AC4, IP – Value = 4000 revolutions Resistance to staining - 5 Static indentation - No visible change, i.e = 0.01mm indentation using a straight steel cylinder, Dia = 11.30mm Resistance to cigarette burns - = Grade 4 Effect of furniture leg - No damage to be visible, when tested with foot type 0 Effect of a castor chair - No change in appearance or damage Thickness swelling - = 18.0% Impact resistance – IC2 Formaldehyde emission – E1 value ( 0.1ppm (0.125mg/m3) Light fastness - Blue wool scale , not worse than 6, Grey scale, not worse than 4 Thickness of the element - ?t average = 0.50mm, relative to nominal value tmax – tmin = 0.50mm Height different between elements – haverage = 0.10mm, hmax = 0.15mm

Repair of Main LT Panel alongwith below given material ACBS Metering Set, -38 nos. Bus Bar MCCBs.-66 nos. Relays, Fabrication etc., 1 Protections for LT Panels Over Voltage, Under Voltage, Single Phasing, Phase reversing, Short Circuit-12 nos. Main LT Floor Panels- 10 nos. Fire Safety panels-6 nos. UPS Panel-1 ??. Al. Armoured Cables 300 Sq. mm, 3.5 Core

Recovery Dismantling of Old chilled water system , including ducts , piping , machines etc and buy back Buyback of system with dismantling , restoration of items at site , and then removing from site .recovery

Supply and Installation of suction and discharge Seamless heavy gauge Copper piping of adequate size duly insulated with 19mm / 13mm thk. Nitrile Rubber Insulation. Refrigeration piping will have to be taken in the piping rack / Support / Cable Tray individually connecting to all indoor units for the respective floors. Pipe work shall include Even necessary connections, tees, reducers, supports, clamps, fittings, valves and ref. joints (Y joints) where ever required will be included. 19.1 mm dia

Supply and Installation of suction and discharge Seamless heavy gauge Copper piping of adequate size duly insulated with 19mm / 13mm thk. Nitrile Rubber Insulation. Refrigeration piping will have to be taken in the piping rack / Support / Cable Tray individually connecting to all indoor units for the respective floors. Pipe work shall include Even necessary connections, tees, reducers, supports, clamps, fittings, valves and ref. joints (Y joints) where ever required will be included. 22.2 mm dia

Supply and Installation of suction and discharge Seamless heavy gauge Copper piping of adequate size duly insulated with 19mm / 13mm thk. Nitrile Rubber Insulation. Refrigeration piping will have to be taken in the piping rack / Support / Cable Tray individually connecting to all indoor units for the respective floors. Pipe work shall include Even necessary connections, tees, reducers, supports, clamps, fittings, valves and ref. joints (Y joints) where ever required will be included. 25.4 mm dia

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Supply and Installation of suction and discharge Seamless heavy gauge Copper piping of adequate size duly insulated with 19mm / 13mm thk. Nitrile Rubber Insulation. Refrigeration piping will have to be taken in the piping rack / Support / Cable Tray individually connecting to all indoor units for the respective floors. Pipe work shall include Even necessary connections, tees, reducers, supports, clamps, fittings, valves and ref. joints (Y joints) where ever required will be included. 15.9 mm dia