REPAIR MAINT OF DG SETS SOLAR WATER HEATER AND FIRE FIGHTING FIRE ALARM SYSTEM INCL ELECTRIC DIESEL JOCKEY PUMPS SLUICE VALVES SPRINKLERS HEAT SMOKE DETECTORS AT ALTINHO BAMBOLIM MADGAON AND ASC AREAS UNDER GE PANAJI

Amount

Material & labour for servicing of DG set of 10 KVA/20 KVA/25 KVA capacity Make : Kirloskar, with replacement of oil filter,Diesel filter & related accessories such as set of 'O' ring, set of joint /gasket, Set of Copper washer,Set of Fuel Flexible Pipe,Set of cogged belt, Set of Hoses, Instrument fuse, Battery maintenance, Dusting ,Cleaning and testing of DG Set all as directed by Engineer-in-Charge. Note for item No. 1,3,5,7,9,11,13,15,17,19,21,23 : 1. Spare parts shall be measured and paid separately under respective items 2. Minor spare parts, which are essential for carrying out servicing but specifically not included in the description of item with a comutative cost up to Rs. 500/- shall also deemed to be included in the unit rate. 3. The spare parts shall be of reputed brand / make and shall be of same type, design, specifications etc to match with the existing and as per the recommendation of OEM.

Supply only for following Items for Ser No-1

Fuel Filter primary element

Spin on filter for Lubricating oil

Main element for air cleaner

All as Same Item No 1 here in before but of 35 KVA DG Sets Make : Kirloskar.

Supply only for following Item for Ser No-3

Fuel Filter primary element

Spin on filter for Lubricating oil

Main element for air cleaner

All as Same Item No 1 here in before but of 62.5 KVA DG Sets Make : Kirloskar.

Supply only for following Item for Ser No-5

Fuel filter element pre-Filter

Fuel filter element micro

Spin on filter for Lubricating oil

Air filter outer

Air filter inner

All as Same Item No 1 here in before but of 100 KVA DG Sets,Make: Greaves Cotton

Supply only for following Item for Ser No-7

Fuel element with O ring

Fuel insert with O ring

Lubricating oil filter

Air filter outer

Air filter inner

All as Same Item No 1 here in before but of 125 KVA DG Sets,Make: Greaves Cotton

Supply only for following Item for Ser No-9

Fuel element with O ring

Fuel insert with O ring

Lubricating oil filter

Air filter outer

Air filter inner

All as Same Item No 1 here in before but of 150 KVA DG Sets, Make : Greaves Cotton

Supply only for following Item for Ser No-11

Fuel element with O ring

Fuel insert with O ring

Lubricating oil filter

Air filter outer

Air filter inner

All as Same Item No 1 here in before but of 380 KVA DG Sets,Make : Greaves Cotton

Supply only for following Item for Ser No-13

Fuel element with O ring

Fuel insert with O ring

Lubricating oil filter

Air filter outer

Air filter inner

Fuel pre filter -KF 5.0 Ltr

Supply and Filling of Engine oil of 15W40 grade of DG Set of capacity 10 KVA to 380 KVA DG Set all as specified and directed. Make : KOEL Care or equivalent Make: IOC/Greaves

Supply and Filling of pre mixed Coolant suitable for DG set Radiator all as specified and directed Brand/Make- K cool Super/Greaves/Waxpool

Supply and Filling of Distilled water in a sealed packing all as specified and directed.

M&L for Repairing of the Alternator after dismantling and removing from the Gen set of capacity 380 KVA canopy type and transporting to an authorised service centre and replacing burnt winding of stator/rotor with existing size coil of high quality including repair/remetaling of alternator shaft and lathe work, replacing ball bearing/bushes and coupling and refixing in position after repair including testing complete all as specified and directed by Engr-in-charge. NOTES FOR ITEM No. :-18, 19, 20,21,22,23,24 & 25 (i) The rate of transportation from site to workshop and back to site is included in quoted rate. (ii) Any other minor parts which required for functioning of alternator will be replaced by the contractor for which rate has to be considered in quoted rate.

All as per item No 18 here in before but of capacity 150 KVA all as specified and directed

All as per item No 18 here in before but of capacity 125 KVA all as specified and directed

All as per item No 18 here in before but of capacity 100 KVA all as specified and directed

All as per item No 18 here in before but of capacity 62.5 KVA all as specified and directed

All as per item No 18 here in before but of capacity 35 KVA all as specified and directed

All as per item No 18 here in before but of capacity 25 KVA all as specified and directed

All as per item No 18 here in before but of capacity 10 KVA all as specified and directed

M&L for repair of Radiator, Dismantling the radiator from DG set of any capacity after removing hose pipe connection, nut, bolts etc and taking out the same to civil workshop for repair and descaling of radiator using descaling chemical etc as approved to remove mud/deposit on fins and/in copper tubes including bracing of copper tubes for arresting of leakage and re-fixing after replacement of unserviceable hose pipes and clamps for DG Capacity 10/25/ 35 / 62.5 KVA all as specified and directed

All as per srl item No 26 here-in-before but for DG Capacity 100/125/ /150 KVA all as specified and directed

All as per srl item No 26 here-in-before but for DG Capacity 380 KVA all as specified and directed

M & L for repair of Self starter of 12 Volts by replacing unserviceable pinion/ armature/Field Coil/Bushes/Bearing/Rivets etc all as required for smooth Functioning including testing and commissioning complete all as specified and directed.

All as per srl item No 29 here-in-before but of Self Starter of 24V all as specified and directed.

M & L for repair of Dynamo of 12 Volts by replacing unserviceable Groove wheel/ armature including testing and commissioning complete all as specified and directed.

All as per srl item No 31 here-in-before but of dynamo of 24V.all as specified and directed

M&L for dismantling and taking out fuel injection pump for servicing from DG set of any type/make and capacity 10 KVA to 35 KVA disconnection of fuel injector line, carrying complete overhauling/ servicing of injector pump, ,calibration of fuel pump as per manufacturer instruction , assembling the same with DG set properly in original position, checking the alignment , making proper fuel connection and testing for smooth operation complete all as directed.

All as per item No 33 here in before but of capacity 62.5 KVA to 100 KVA all as specified and directed

All as per item No 33 here in before but of capacity 125 KVA 150 KVA all as specified and directed

All as per item No 33 here in before but of capacity 380 KVA all as specified and directed.

Supply & fixing in replacement of old unservicable Feed pump for fuel injection pump complete assy for DG Set of Capacity 10KVA to 62.5 KVA all as specified and directed.

All as serial No- 37 here in before but of capacity 100 KVA to 125 KVA all as specified and directed .

All as serial No- 37 here in before but of capacity 150 KVA to 380 KVA all as specified and directed.

Material & labour for opening / taking out of injector of DG set of any type/make and capacity 10 KVA to 35 KVA disconnection and opening of fuel injector assembly, carrying complete overhauling/servicing fuel injection system with including replacement of injector repair kit ,including calibration of injector, checking of pressure complete for each injector and re-assembling the same, fitted with DG set properly in original location, checking the alignment, making proper fuel connection, testing for smooth operation complete all as directed.

All as serial item No 40 here in before but of capacity 100 KVA to 125 KVA all as specified and directed.

All as serial item No 40 here in before but of Capacity 150 KVA to 380 KVA all as specified and directed.

Supply & fixing in replacement, of fuel shutoff valve assy , solenoid valve kit including taking out old valve assy and making all connection, testing for smooth operation of DG set of Capacity 10-125 KVAcomplete all as specified and directed

All as serial item No 43 here in before but of capacity 150 KVA to 380 KVA all as specified and directed.

Supply and fixing, in replacement, Radiator cap suitable for DG Set of any type / make and capacity, complete all as directed.

S & F, in replacement, higher crank power , high charge retention, superior spill resistant,12V, 105 AH complete all as specified and directed. Note : Old U/S battery deposited to AGE.E/M. Store.

S & F, in replacement, higher crank power , high charge retention, superior spill resistant,12V, 90 AH complete all as specified and directed. Note : Old U/S battery deposited to AGE.E/M. Store.

S&F in replacement of unsv thermostat with new thermostat alongwith complete assy for DG set connection testing complete all as specified and directed.

Supply and fixing, in replacement of Old unserviceable RPM CABLE .all as specified and directed

Supply and fixing, in replacement of Old unserviceable water temp gauge all as specified and directed.

Supply and fixing, in replacement of Old unserviceable OIL Pressure gauge all as specified and directed.

Supply and fixing, in replacement of Old unserviceable OIL Temperature gauge DG sets all as specified and directed..

Supply and fixing, in replacement, of Electronic Automatic Voltage Regulator (AVR) suitable for DG Set of 10 KVA to 62.5 KVA capacity, with and including taking out old AVR and making all connection, testing for smooth operation complete all as directed.

All as Same as item No 53 here in before but of size 100 KVA to 125 KVA DG sets all as specified and directed.

All as same as item No 53 here in before but of size 150 KVA / 380 KVA DG sets all as specified and directed.

Material & labour for carrying out complete overhauling / servicing of DG set panel/ control panel, including checking and rewiring faulty electrical circuit using 1.5 sqmm FRLS copper conductor, for DG Set of any type / make / capacity, making all electric connections and testing for smooth operation, complete all as directed.

Material & labour for Supply & fixing in replacement of Capacity CTs 100/5 DG sets all as specified and directed.

Material & labour for Supply & fixing in replacement of push button Switch of DG Set all as specified and directed.

Material & labour for Supply & fixing in replacement volt meter , 3 phase(0-500) volt of size 96 X 96 MM of DG Set all as specified and directed..

Material & labour for Supply & fixing in replacement Ammeter ,0-400 Amps, 3 Phase of Size 96X96MM of DG Set all as specified and directed.

Material & labour for opening /taking out of turbo charger of DG set of 10 KVA to 62.5 KVA capacity ,disconnection of air supply connection pipe etc,complete overhauling,servicing of turbo charger ,replacement of turbo charger repair kit including calibration/ testing of turbo charger system complete and re-assembling the same ,fitted with DG set properly in original position, checking the alignment, making proper all connection, testing for smooth operation complete all as directed.

All as Same Item No-61 here in before but suitable for 100 KVA to 125 KVA capacity of DG Set all as specified and directed.

All as Same Item No-61 here in before but suitable for 150 KVA to 380 KVA capacity of DG Set all as specified and directed.

Taking out and replacement of unservicable/blocked residential silencers of size 80 cm dia and 20 cm length suitable 62.5 KVA DG sets, including supply and fixing of MS bend,flange,flexible coupling,nut bolt, gasket and cutting welding and fixing of pipe complete all as directed.

Taking out and replacement of unservicable/blocked residential silencers of size 32 cm dia and 85 cm length suitable 150 KVA DG sets, including supply and fixing of MS bend,flange,flexible coupling,nut bolt, gasket and cutting welding and fixing of pipe complete all as directed.

M& L for aluminium cladding on MS pipe of dia 80/100 mm exhaust pipe of DG Set, including thermal insulation with 50 mm thick layer of LBR rock wool having density 144 kg per cubic meter ,with embedded chicken wire mech and cladding with 6mm aluminium sheet including fixing on existing MS support structure on the wall / ceiling including cutting ,welding work etc as required at site all as directed. Note : MS Pipe will be Measured and Paid Separately.

M& L for aluminium cladding on MS pipe of dia 150 mm exhaust pipe of DG Set, including thermal insulation with 50 mm thick layer of rock wool having density 144 kg per cubic meter , wrap with 24 gauge chicken wire mesh and cladding with 6mm aluminium sheet including fixing on existing MS support structure on the wall / ceiling including cutting ,welding work etc as required at site all as directed. Note : MS Pipe will be Measured and Paid Separately.

Supply and fixing in replacement of water pump complete of existing make suitable for DG set 10 KVA to 62.5 KVA all as specified and directed.

M&L for descaling of cooling system of DG Set of capacity 10 to 125 KVA by Radiwash, with two times circulation of Radiwash & cleaning of fan blades, crankcase breather, radiator and its fins by means of high pressure air or water.

All as same item No- 69 here in before but of capacity 150 KVA to 380 KVA of DG Set all as specified and directed.

Supply and fixing, in replacement battery lead in red & Black colour PVC insulated, multi stranded copper single core unsheathed cable of size 10 sqmm, 1100 volts grade,1.5 mtr long fitted including brass bty terminal at one end and copper thimble of 10 sqmm at other end ,complete all as directed.

M&L for radiator fan guard of existing make ,including taking out u/s fan guard of 10 KVA to 125 KVA DG set all as specified and directed.

All as serial item No 72 here in before but for 150 KVA to 380 KVA DG sets all as specified and directed.

S&F for replacement of on load change over switch 3 phase 415 volt 50 Hz 200 Amp to be fixed in existing panel of DG sets all as specified and directed.

S&F off load change over switch side handle operated in SS sheet enclosure of rating 3 phase 415 volt 200 Amps four pole DG sets all as specified and directed. ,

S&F off load change over switch side handle operated in SS sheet enclosure of rating 400 Amps four pole DG sets all as specified and directed.

S&F off load change over switch side handle operated in SS sheet enclosure of rating 100 Amps four pole DG sets all as specified and directed.

M & L for top overhauling of 100 KVA DG Set, Make : Greaves Cotton Ltd Model 4YDC MKIII, by opening and dismantling of cylinder head and connected accessories etc after complete of work including re-assembling the head and tapit valve setting etc, replacing the complete gasket set etc all as directed by Engineer-in-Charge. Note :-(i) Spare parts shall be measured and paid separately under respective item of this sch . (ii) Minor spare parts, which are essential for carrying out repair works but specifically not included in the description of item shall also deemed to be included in the unit rate. (iii) The rate quoted shall be deemed to be inclusive of cleaning using chemicals, cutting, grinding, rematling, polishing, and lathe work required if any . Supply only Following spare parts.

Valve Stem seal

Gasket cylinder head

Main bearing Narrow .01"U/S Pair

Set of joints 4YDX/C-MK3

Set of O Rings 4YDX/C-3

V- Belts A-40 YDA Elect ST

V Belt For 4YDC5

Lub Oil Filter(232V12)

Filter Element With O Ring

Filter Insrt With O Ring

L.E. Bearing .01"U/S IN -Pair

Main bearing Wide .01"U/S Pair

Small End bush

Screw Adjusting tappet

Kit For turbo Charger

Fresh Water Pump Kit

Oil Seal

Cylliner Ydx MK III

Piston+Gpin+CirclipY3DX

Inlet Valve YDX

Exh Valve YDX

V.S.insert IN/Y2-3Dx(std)

Injector tube

Rocker Shaft Assy

Injector Nozzle

L.O.pipe

L.O.pipe

Piston ring set YDX(III)

Valve Guide YDAX/YDX T/C

V.S. Insert EX/Y2-3DX(STD)

Thrust washer .125/.123/A

Branch Pipe

Delivery Valve

Element F I Pump 'A' V12

All as Same item No- 78 here in before but 62.5 KVA DG sets. Make :Kirloskar,

Cylinder liner with Joint ring

piston Assy complete

Set of Joints

Set of O rings

Set of copper Washer

Gasket for cylinder head (thickness 1.21 mm)

Inlet and exhaust Valve Pair

Valve guide (for Inlet and exhaust)

Valve seat insert (Inlet)

Valve seat insert (exhaust)

Valve seal

Valve collet

Wire snap ring

Bearing T/W KIR HA 394

Bearing Main KIR HA 494

Bearing C/R KIR HA 494

C.073.6.00.703 Bearing C/Bush KIR HA 394

V.R.Toe

Starter ring 121 teeth3.175 Module

Bearing Bush S/E KIR HA 494

L.O Supply hose (FIP) M10 Banjo ends X235 L

Spin on filter for lubricating oil

Fuel filter element pre

Fuel filter element micro

Lubricant oil pump assly.

Gear end oil seal (80X105X12)

Oil seal(115X140X12) CR Make

Bush for injection

Lubricant oil pump assembly for driving Gear

Bolts for cylinder head

Rocker arm adjustable screw

Thermostat by pass hose

Lubricant oil Cooler & header assly

Fuel pipe (7.5,14X14B,700PB)

Con rod assembly (without LE Bearing)

Oil spray nozzle assy

H. P complete Set (700 MM)

Water pump Assly 282.5 CRS , w/o pully

Valve rocker assembly -Complete

T bolt clamp , Klipco TB 78 / jupitor (84 to 92 dia)

Thermostat Element (74 deg)-WTIL No DEV358

Leak off pipe assembly

Hose (Pipe to water pump) (45X45X80L)

Locating Bolt(For Eye bolt) 65MM

Eye Bolt (190MM)

Lubricant oil sump (Flat face)

Deepstick assly (Presed sump 210-170X25-38)

O ring-deepstick (2X5 , 21515 or 21511)

Push rod (welded)

Assly of intermediate gear & bush

Plate foe Fuel filter (on inlet Manifold)

Cap assly

Stud-M12X1.75X25-8.8

Supply and Fixing in repair following spare parts: Notes: Sl No. (a) to (ae) : (i) The spare parts shall be of reputed brand / make and shall be of same type, design, specifications etc to match with the existing and as per the recommendation of OEM .

Poly V Belt ,Cat Part No-4H.1493.01.0.00

V Belt (XPA1250) Cogged, Part No-4H.069.01.0.00

Poly V Belt 8PK:1065 ,Cat Part No-F6.184.03.0.00

Poly V Belt 4PK:1515 ,Cat Part No-F6.184.04.0.01

V Belt(400/500/600 KVA) Fpr Fan Drive,part No-KV.056.29.0.00

V Belt(100/125/150/380 KVA) For water pump , part No-KV.056.30.0.00

Cogged Belt AX-40

Cogged Belt AX/64

Cogged BeltAX/43

Cogged Belt AX-44

Cogged Belt AX/57

Self starter for 35 KVA DG,Part No-48.470.01.0.00

Rubber Hose (compresser out let),Part No-4H.168.03.0.00

Rubber Hose (For Air cleaner),Part No-4H.166.06.0.00

Supply only nylon braded pipe 25 mm dia

Supply only asbestos rope 1/2" Dia

Engine wiring harness assembly, DG 63 KVA ,Kirloskar

Controller KG 934with 4-20 MA updated volt

SS left hand hing for Canopy

SS right hand hing for Canopy

Left Hand lock with Catcher

Right Hand lock with Catcher

Rubber Hose (For Air cleaner) DG 150 KVA ,Cummins

Fuel pipe (9.5 ID x 4000L) for 62.5 KVA DG kirloskar

Hose clip(41 mm/54mm/70 mm)

Centrifugal Filter for 125 KVA DG Set of Kirloskar

Starter ring gear on fly for DG 150 KVA , Make : Greaves Cotton

Starter ring gear on fly for DG 125 KVA , Make : Greaves Cotton

Starter ring gear on fly for DG 62.5 KVA , Make : kirloskar

Generator control unit level-2 KG545, for DG 62.5 KVA ,Make : Kirloskar

Self starter 24 Volts , part No KV 0.260.01.0.00 ,1

M&L for preparation of surface by scrapping existing painted surface and painting canopy, alternator, diesel engine body, radiator base frame, engine - alternator base channel and panel board etc applying one coat of synthetic enamel paint of existing colour and one coat of heat resistant paint of approved quality to engine and exhaust pipe by spray Machine including writing SM/MES No of DG set capacity 10 KVA to 35 KVA all as directed by Engineer-in-charge.

M&L for preparation of surface by scrapping existing painted surface and painting of alternator, diesel engine body, radiator base fram , engine base channel and panal board etc applying one coat of synthetic enamel paint of existing colour and one coat of heat resistant paint of approved quality to engine and exhaust pipe by spray Machine including writing SM/MES No of DG set capacity 62.5 KVA to 150 KVA all as directed by Engineer-in-charge.

M&L for preparation of surface by scrapping existing painted surface and painting canopy, alternator, diesel engine body, radiator base fram , Engine alternator Base channel panal board etc applying one coat of synthetic enamel paint of existing colour and one coat of heat resistant paint of approved quality to engine and exhaust pipe by spray Machine including writing SM/MES No of DG set capacity 380 KVA all as directed by Engineer-in-charge.

Supply fabricating and fixing of MS angle of size 50x50x6 mm cut to required shape and size DG sets all as specified and directed..

Supply and fixing in replacement of water pump complete of existing make suitable for DG set 62.5 KVA to 380 KVA all as specified and directed.

Supply, fabrication and fixing of leak proof, cubical shape closed fuel tank of 500 litres cap, fabricated out of 3 mm thick MS sheet and kept on MS 'C channels' of size 70X40 mm, height more than 2 meter (as decided by Engr-in-Charge) and fixed ladder accessible to tank of MS angle iron of size 50X50X6 complete with all standard accessories and fuel piping between fuel tank and diesel engine with GI pipe medium grade of dia 20 mm Complete with valves, level indications & accessories all as required and directed.

M&L for Fabrication of Daily fuel tank of 200 litres capacity fabricated out of 3 mm thick MS sheet complete with all standard accessories and fuel piping between fuel tank and diesel engine with GI pipe medium grade of dia 15 mm with flexible pipe Complete with valves, level indications & accessories all as required and directed.

M&L for Replacement of Radiator assembly of existing shape and size of DG set 100 KVA to150 KVA, Make: Cummins, Model : welding / soldering and replacement of all necessary fitting and hose pipe etc complete all as specified and directed.

Supply in Replacement of Battery charging unit including rectifier unit , voltage regulator,two Nos clamp,nuts, bolts and 5 M length of stranded copper conductor PVC cable 2.5 sq mm 3 run from power point to battery charger and 1.5 M length of 2 run for battery charger to battery etc suitable for 12 volt battery charging unit DG sets all as specified and directed.

M & L for Overhauling of water pump assy for necessary descalling including replacement of water pump kit , refixing and testing complete for DG 100 KVA to 125 KVA DG sets all as specified and directed.

M & L for Overhauling of water pump assy for necessary descalling including replacement of water pump kit , refixing and testing complete for DG 150 KVA to 380 KVA DG sets all as specified and directed.

Supply and Fixing Display Unit for DG Set of 380 KVA , Make Cumins at MH. Panaji all as specified and directed by Engr- in-Charge.

Dismantling of deterioted and cracked foundation of DG Set of any capacity 10 KVA to 380 KVA and M&L for construction of foundation of DG Set of size 1.8m x 1.2m x 0.2m with PCC(1:2:4) alongwith foundation bolt, antivibration pad, shifting of DG Set, electric and mechanical connection complete and testing all as specified and directed.

Repair/ Servicing/ Maintenance of Jockey Pump horizontal end suction centrifugal type Confirming to IS- 12469:1988 with CI casing bronze impeller and stainless steel shaft mounted on heavy duty bearings suitable for automatic operation with nonover loading power characteristics for frequent start / stop operations for 440 V , 3 phase, 50 Hz 7.0 HP existing type/make suitable for existing capacity all as specified and directed.

Repair/ Maintenance of Fire Hydrant Pump horizontal end suction centrifugal type Confirming to IS- 12469:1988 with CI casing bronze impeller and stainless steel shaft mounted on heavy duty bearings suitable for automatic operation with nonover loading power characteristics for frequent start / stop operations for 440 V , 3 phase, 50 Hz 50.0 HP existing type/make suitable for existing capacity all as specified and directed.

Repair/ Maintenance of Fire Sprinkler Pump horizontal end suction centrifugal type Confirming to IS- 12469:1988 with CI casing bronze impeller and stainless steel shaft mounted on heavy duty bearings suitable for automatic operation with nonover loading power characteristics for frequent start / stop operations for 440 V , 3 phase, 50 Hz 30.0 HP existing type/make suitable for existing capacity all as specified and directed.

Repair/ Servicing / Maintenance of Diesel Engine driven Fire Pump Set of existing type/make suitable for existing capacity of 38.0 HP suitable for automatic operation with nonover loading power characteristics for frequent start / stop operations for 440 V , 3 phase, 50 Hz existing type/make suitable for existing capacity all as specified and directed.

Taking down Unserviceable Fire Pump , Electric driven ,440 V , 3 phase, 50 Hz of any Make and capacity for 30.0 HP to 50.0 HP existing type/make from it's existing position to Repairing at workshop for Rewinding with existing gauge of copper enamel wire and make the motor functional with his previous RPM/Speed and heating /Varnshing complete , then refixing the rewinded/functional motor for smooth functiong ,testing /commissioning the Pump Set with existing Fire pipes Complete suitable for automatic operation with nonover loading power characteristics for frequent start / stop operations for 440 V , 3 phase, 50 Hz for existing capacity all as specified and directed.

Repair/ Maintenance of Fire Alarm Panel complete of existing type/make suitable for existing capacity all as specified and directed.

Repair/ Maintenance of Smoke/ Heat Detector Electronic Panel complete of existing type/make suitable for existing capacity all as specified and directed.

Repair/ Maintenance of Fire Fighting Main Electrical Panel with repair replacement of U/S Spare parts by opening and dismantling of U/S spare parts connected accessories etc after complete of work including re-assembling the motor starters,MCBs,MCCBs,wiring cables, etc, replacing the necessary items complete all as Specified and as directed by Engineer-in-Charge. Note :-(i) Spare parts shall be measured and paid separately under respective item of this sch . (ii) Minor spare parts, which are essential for carrying out repair works but specifically not included in the description of item shall also deemed to be included in the unit rate. (iii) The rate quoted shall be deemed to be inclusive of cleaning using chemicals, cutting, grinding, rematling, polishing, and lathe work required if any . Supply only Items.

Supply only Battery Charger ,12 Volt, DC for Diesel Engine Fire Pump of capacity 38 HP all as specified and directed.

Supply only MCB SP 6 Amps,10 KA 'C' Series,230 Volts all as specified and directed

Supply only MCB TPN 32Amps,10 KA,, 'C' Series,230 Volts all as specified and directed

Supply only MCCB 3 Pole .415 V. fixed type,125 Amps with breaking capacity 16 KA all as specified and directed

Supply only MCCB 3 Pole .415 V. fixed type,100 Amps with breaking capacity 16 KA all as specified and directed

Supply only Relay Suitable for Diesel Engine Fire Pump of capacity 38 HP all as specified and directed

Supply only Relay Suitable for Jockey Pump of capacity 7.4 HP all as specified and directed

Supply only Relay Suitable for Sprinkler Pump of capacity 30.0 HP all as specified and directed

Supply only Relay Suitable for Hydrant Pump of capacity 50.0 HP all as specified and directed

Supply only 3 Pole Contactor,3 Phase ,415 Volts Suitable for Jockey Pump of capacity 7.4 HP all as specified and directed

Supply only 3 Pole Contactor,3 Phase ,415 Volts Suitable for Sprinkler Pump of capacity 30.0 HP all as specified and directed

Supply only 3 Pole Contactor,3 Phase ,415 Volts Suitable for Hydrant Pump of capacity 50.0 HP all as specified and directed

Supply only Automatic Timmer Switch Suitable for Diesel Engine Fire Pump of capacity 38 HP all as specified and directed

Supply only Automatic Timmer Switch Suitable for Sprinkler Pump of capacity 30.0 HP all as specified and directed

Supply only Automatic Timmer Switch Suitable for Hydrant Pump of capacity 50.0 HP all as specified and directed

Supply only Panel mounted Automatic Hooter Suitable for Fire Fighting System of Existing Make/capacity all as specified and directed

Supply only Panel mounted Automatic Buzzer Suitable for Fire Fighting Panel of Existing Make/capacity all as specified and directed

Supply only Panel mounted Multi Functional Electronic Meter for measurements of Voltage, Current ,PF etc Suitable for Fire Fighting Panel of Existing Make/capacity all as specified and directed

Supply only Panel mounted Indicating Lamp ( Red/Blue/Yellow) including base holder Suitable for Fire Fighting Panel of Existing Make/capacity all as specified and directed

Supply and fixing in repair/ replacement of Detectors Complying with and type certified to EN - 45 Addressable type Smoke Detector, Photoelectric /Optical with base with self built intelligence as per IS: 11360 Smoke Detector complete of existing type/make suitable for existing capacity all as specified and directed.

Supply and fixing in repair/ replacement of Detectors Complying with and type certified to EN - 45 Addressable type multisensor detector with heat and smoke combination Photoelectric /Optical with base with self built intelligence as per IS: 11360 Smoke / Heat Detector complete of existing type/make suitable for existing capacity all as specified and directed.

Supply and fixing in repair/ replacement of Sprinkler Quick / Early response type as per IS 15105/TAC guidelines 79 degree temperature rating Sprinkler flexible type 1.5 mtr type complete of existing type/make suitable for existing capacity all as specified and directed.

Supply and fixing in repair/ replacement of Fire alarm control panel complying with BS EN 54, 2 loop panel of capacity with 99 detectors & 99 modules and upto 200 detectors and modules (Per each Loop) complete of existing type/make suitable for existing capacity all as specified and directed.

Repair/Maintenance of Fire alarm control panel complying with BS EN 54, 2 loop panel of capacity with 99 detectors & 99 modules and upto 200 detectors and modules (Per each Loop) complete of existing type/make suitable for existing capacity all as specified and directed.

Supply and fixing in repair/ replacement of Explosive proof Addressable Mannual Call Point Re-Settable type/ Add upControl Module type complete of existing type/make suitable for existing capacity all as specified and directed.

Supply and fixing in repair/ replacement of Explosive proof Addressable Mannual Call Point Remote response indicators complete of existing type/make suitable for existing capacity all as specified and directed.

Supply and fixing in repair/ replacement of Ceiling mounted Speaker of capacity 6 watt complete of existing type/make suitable for existing capacity all as specified and directed.

Supply and fixing in repair/ replacement of Wall mounted CD Speaker of capacity 6 watt complete of existing type/make suitable for existing capacity all as specified and directed.

Repair/ Maintenance of PA System Amplifier of Capacity 250 watts of existing type/make- Ahuja with repair/replacement of U/S Spare parts and make it functional all as specified and directed.

Supply and Fixing Fire Alarm sounders / Sirens electronic type horizontal two stage continuous normal operation for atleast 50 minutes with sound level 65 DB to 120 DB Measured at 1.5m with sound output Variation of + 5 db 500m rangeall as specified and directed.

S & F in Repair/ Maintenance of Alarm Valve,Model-H,250 PSI, FM Approved , Suitable for Water motor and Gong of existing type/make suitable all as specified and directed.

S & F in Repair/ Maintenance of Pressure Gauge for Fire protection Service,,0-16 Kg/Cm.square or 0-220 PSI, FM Approved , Suitable for Air/Water motor of existing type/make suitable all as specified and directed.

S & F in Repair/ Maintenance of Pressure Gauge for Fire protection Service, Model-HDP-1,0-21 Kg/Cm.square or 0-300 PSI, UL Listed 40 BN , FM Approved , Suitable for Air/Water motor of existing type/make suitable all as specified and directed.

S & F in Repair/ Maintenance of Water Pressure Switch /Cut-Out for Fire protection Service,,0-16 Kg/Cm.square or 0-220 PSI, FM Approved , Suitable for Air/Water motor of existing type/make suitable all as specified and directed.

S & F in Repair/ Maintenance of Gate Valve 25 mm for Fire protection Service, Suitable for Fire Water motor Pipe lines of existing type/make suitable all as specified and directed.

S & F in Repair/ Maintenance of Gate Valve 50 mm for Fire protection Service, Suitable for Fire Water motor Pipe lines of existing type/make suitable all as specified and directed.

S & F in Repair/ Maintenance of Ball Valve 25 mm for Fire protection Service, Suitable for Fire Water motor Pipe lines of existing type/make suitable all as specified and directed.

S & F in Repair/ Maintenance of Ball Valve 50 mm for Fire protection Service, Suitable for Fire Water motor Pipe lines of existing type/make suitable all as specified and directed.

S & F in Repair/ Maintenance of Suction type Strainer 150 mm for Fire protection Service, Suitable for Fire Water motor Pipe lines of existing type/make suitable all as specified and directed.

S & F in Repair/ Maintenance of Non-Return Valve (NRV) 80 mm size,ISI Marked ,IS-5312,Part-1,PN-1.6 for Fire Fighting Pipe lines, Suitable for Fire Water motor of existing type/make suitable all as specified and directed.

S & F in Repair/ Maintenance of Non-Return Sluice Valve (NRV) 150 mm size,ISI Marked ,IS-5312,Part-1,PN-16 for Fire Fighting Pipe lines, Suitable for Fire Water motor of existing type/make suitable all as specified and directed.

S & F in Repair/ Maintenance of Non-Return Butterfly Valve 150 mm size,ISI Marked ,IS-13015,Part-1,PN-1.6 for Fire Fighting Pipe lines, Suitable for Fire Water motor of existing type/make suitable all as specified and directed.

Supply and fixing in repair/ replacement of Single Headed Hydrant Valve complete of existing type/make suitable for existing capacity all as specified and directed.

Supply and fixing in repair/ replacement of Double Headed Hydrant Valve complete of existing type/make suitable for existing capacity all as specified and directed.

M & L for Painting of ERW Fire Fighting Pipe lines of 100 mm size including Single headed/double headed Hydrant Valves by two coats of Fire red colours after rubbing the rusted surfaces matching with existing shade all as specified and directed.

M & L for Painting of ERW Fire Fighting Pipe lines of 150 mm size including Single headed/double headed Hydrant Valves by two coats of Fire red colours after rubbing the rusted surfaces matching with existing shade all as specified and directed.

M & L for Painting of MS Fire Fighting Hose box made of 18 gauge MS Sheet 800mm X 600mm X 250mm with double door with 4 mm thick glasses and door frame made of 16 gauge MS sheet painted fire red out side and brilliant white inside yard after rubbing the rusted surfaces matching with existing shade all as specified and directed.

Dismantling and taking out old un-serviceable Solar Water heater from any height or any position with checking and disconnecting its hot and cold water pipe lines connection and unserviceable parts ,such as heating chamber, collecting pannel,hot water tank, water reserves and water make up tank etc and replace the minor spare parts and accessories including adequate/existing length and size inlet/outlet hot/cold water pipes connected with Solar water heater system and refitting the same in its own position including servicing the all parts and equipments of existing Solar Water Heater of capacity 300 LPD of Make/Model:-Racold ( Omega Max 8 ) and testing complete in all respect all as specified and directed. Note :- Spare parts will be measured and paid separately in respective Supply only items .

Supply only Solar Brass Coupler Collector as per existing size to be fitted with Solar water heater system of capacity 300 LPD Make / model : - RACOLD ( Omega Max 8 ) / Supreme /Crux Power or equivalent .

Supply only Aluminium Absorber Ultra 2 Collector (HN) as per existing size to be fitted with Solar water heater system of capacity 300 LPD .Make / model : - RACOLD ( Omega Max 8 ) / Supreme /Crux Power or equivalent .

Supply only Solar Hot water pipe duly insulated with glass wool and aluminium cladding 20 mm bore as per existing size to be fitted with Solar water heater system of capacity 300 LPD Make / model : - RACOLD ( Omega Max 8 ) / Supreme /Crux Power or equivalent .

Supply in replacement of Solar tank of capacity 300 ltrs PUF with Stand for FPC as per existing size to be fitted with Solar water heater system of capacity 300 LPD.Make / model : - RACOLD ( Omega Max 8 ) / Supreme /Crux Power or equivalent .

Supply in replacement of Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I of capacity 750 ltrs to be fitted with Solar water heater system of capacity 300 LPD with taking down old one.Make : - Sintex / Polycab or equivalent .

Shriyansh sales and services (BID ID -3368721)

cooltech engineering services (BID ID -3377563)

M/s Harshal Traders (BID ID -3368598)