Construction of New PG Girl Hostel

Amount

EARTHWORK

Surface dressing of the ground including removing vegetation and in- equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. in all kinds of soil.

Clearing jungle including uprooting of rank vegetation, grass, brush wood,trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.

Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including dressing of sides and ramming of bottom disposal of excavated earth, lead up to 50m and lift up to 1.5m, disposed earth to be levelled and neatly dressed. (No extra lift is payable if work is done by mechanical means) All kinds of soil

Earth work in excavation/ by mechanical means (Hydraulic Excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including dressing of sides and ramming of bottom disposal of excavated earth, lead up to 50 m and liftup to 1.5 m, disposed earth to be levelled and neatly dressed. (a) Ordinary Rock

Filling available excavated earth (excluding hard rock/Ordinary rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Carriage of Earth by mechanical transport including loading, unloading and Stacking including royalty & carriage up to 5 KM complete.

Supplying and filling in plinth under floors including watering ramming consolidating in layers not exceeding 20cm in depth and dressing complete. (b) Supplying and filing in plinth with soil (other then BC soil ) having MDD not less than 1.85 t/m3 under floors including watering, ramming and compacting (minimum compaction 95% of MDD) in layers not exceeding 15cm depth and dressing complete.

Providing & laying 230mm thk compacted hard-core of 150 to 200mm size stone soling including watering, ramming, rolling, blinding with moorum including cost of all labour and material complete as per directions of Engineer-In-charge.

Preconstruction antitermite treatment to the building under construction by providing. Stage 1: Treating the bottom and the sides (upto 30 cm height of the excavated trench @ 5 liters per sqm of the surface area. Stage 2: After masonry/RCC work, the backfill in the immediate contact with the foundation structure treatment @ 7.5 liters per sqm. Of the vertical surface of the substructure for each side. Stage 3: surface treatment by spreading emulsion over the plinth area before laying the base concrete under floors @ 5.0 litres/Sqm. Stage 4: Pumping the emulsion in plinth masonry on filling side at floor junction @ 7.5 litres/Sqm. Stage 5: Pumping the emulsion from outer side of the plinth below ground around the masonry @ 5.0 litres/Sqm as per I.S. 8944 Emulsion. (1Chlorpyrifos: 19 water) with five years service guarantee (Measurements to be taken for plinth area) Note – Treatment should start when foundation trenches and pits are ready to take bed concrete or leveling course in foundations. Lying of bed concrete should start when the chemical emulsion has been absorbed by the soil and the surface is reasonably dry. Treatment should not be carried out when it is raining or when soil is wet with rain or subsoil water. This also applies to fill up soil within the plinth area before laying the subgrade for flooring.

Supplying chemical emulsion in sealed containers including delivery as specified. Chlorpyriphos/ Lindane emulsifiable concentrate of 20%

CONCRETE

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level :With 40mm nominal size graded stone aggregate. M-10 Nominal (Mix -1 Cement : 3 sand : 6 graded stone aggregate)

Providing centering & shuttering including strutting and propping etc. and removal of formwork for Foundations, footings, bases of columns, etc. for mass concrete

Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

Centering and shuttering in cluding strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platform.

Centering and shuttering in cluding strutting, propping etc. and removal of form for: Shelves(Cast in situ)

Centering and shuttering in cluding strutting, propping etc. and removal of form for: Lintels, beams, girders, bressumers and cantilevers

Centering and shuttering in cluding strutting, propping etc. and removal of form for: Columns, P i l l a r s , Piers, Abutments, Posts and Struts.

Centering and shuttering in cluding strutting, propping etc. and removal of form for: Stairs, (excluding landings) except spiral- Staircases.

Centering and shuttering in cluding strutting, propping etc. and removal of form for: Small lintels not exceeding 1.5m clear span, mouldingas incornices, window, sills, courses, bands, copings, bed plates, anchor blocks and the like.

Centering and shuttering in cluding strutting, propping etc. and removal of form for: Weather shade, Chajjas, corbels etc., including Edges.

Steel reinforcement for R.C.C. work ready to use "cut and bend" rebars of approved make from factory/workshop to construction site including placing in position and binding all complete upto plinth level. (a) Thermo-Mechanically Treated bars of grade Fe-500D or more.

Steel reinforcement for R.C.C. work ready to use "cut and bend" rebars of approved make from factory/workshop to construction site including placing in position and binding all complete above plinth level. (a) Thermo-Mechanically Treated bars of grade Fe-500D or more.

Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 1.10 times of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. All works upto plinth level. (a) Concrete of M-25 grade with minimum cement content of 330 kg /cum

All works above plinth level and upto floor V level. (a) Concrete of M-25 grade with minimum cement content of 330 kg /cum

Providing and laying damp-proof course 40 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size).

Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification.

Applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.

BRICKWORK

Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in: (a) Cement mortar 1:4 (1 cement : 4 coarse sand)

Brick work with common burnt clay modular bricks of class designation 7.5 in exposed brick work including making horizontal and vertical grooves 10mm wide 12 mm deep complete in cement mortar 1:6 (1 cement : 6 coarse sand). (a) Above plinth level upto floor V level

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. (a) Cement mortar 1:4 (1 cement :4 coarse sand)

Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry.

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : (a) Cement mortar 1:6 (1 cement : 6 coarse sand)

Random rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) at window sills, ceiling level and the like. (a) Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing and laying raised & cut pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand)

Providing 40mm thick precast cement concrete Jali 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 6mm nominal size ), reinforced with 1.6 mm dia mild steel wire, including centering and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 fine sand) etc. complete, excluding plastering of the jambs, sills and soffits.

FLOORING

Providing & laying 25mm thick Kota stone slab flooring laid over 20mm thick base and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :

Providing & laying Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. Granite stone slab of all colour and texture except black, Cherry/Ruby red (a) Area of slab upto 0.50 sqm

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. Granite stone slab of all colour and texture except black, Cherry/Ruby red (b) Area of slab over 0.50 sqm

Providing edge moulding to 18 mm thick granite stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.

Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete.

Extra for providing opening of required size & shape for wash basin/kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.

M & L, 8mm thick granite Stone tile work of any colour and shade, mirror polished and machine cut edge for wall lining upto 10 m height with special adhesive over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 sand), with cement slurry @ 3.3kg/sqm including pointing in white cement with admixture of pigment to match the stone shade complete all as specified and directed.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete.

Providing and laying double charge vitrified tiles polished finish of size 600 x 600mm in floor (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.

Providing and laying double charge Vitrified tiles polished finished of size 600 x 600mm (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joint with white cement & matching pigments etc. complete.

Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with dark shade pigment using ordinary cement to match the shade of tiles, including rubbing and cleaning etc. complete, on 20mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).

FINISHING WORK

Providing & applying 15 mm cement plaster in on rough side of single or half brick wall finished with a floating coat of neat cement of mix in CM 1: 4 (1 Cement : 4 coarse Sand) all heights and levels including scaffolding, curing etc. complete.

Providing & applying 12mm cement plaster in CM 1:3 (1Cement : 4 Coarse sand) on ceiling surfaces, finished with a floating coat of neat cement of all heights and levels including scaffolding, curing etc. complete.

Providing & applying 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster 1:3 (1 cement : 3 coarse sand) finished smooth including scaffolding and using admixture of approved make while plastering the junction of two different material such as RCC and brick etc.

Providing and fixing G.I. chicken mesh as per ISI specification and in the required width with 50mm long Bombay nails before plastering upt 10 meter height as in vertical and horizontal junction of RCC and brick/AAC work including scaffolding and all lead and lift etc. complete

Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers.

Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof.

Providing and applying plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete.

Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound) content less than 50 grams/ltr of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coat on new work.

Finishing walls by any mechanical or manual means with Acrylic Smooth exterior paint of required shade including all scaffolding. New work (Two or more coat applied @1.67ltr/10sqm over and including priming coat of exterior primer applied @ 2.20 litre/10 sqm complete all as specified and as directed.

Providing & applying three or more coats of white washing with lime, using DDL (of pidilite) binder as per manufacturers specifications, to ceilings and walls to give an even shade, on new work including surface preparation at all levels & heights.

Providing and applying Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer [email protected] ltr/10 sqm of approved brand or manufactureof approved brand and manufacture of required colour to give an even shade over an under coat of suitable shade with ordinary paint of approved brand and manufacture.

Providing and applying Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @0.80 ltr/ 10 sqm of approved brand or manufacture.

Supply only water proofing compound as per requirement

WOOD WORKS

Providing and fixing pressed steel door frames made of 1.6 mm thick steel profile conforming to IS: 4351 manufactured from commercial mild steel sheet including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.60 mm pressed mild steel welded or rigidly fixed together by mechanical means, including 2.5mm thick M.S. pressed butt hinges, with mortar guards, lock strike-plate and shock absorbers as specified filling the frame with Cement Concrete 1:3:6 at site before fixing (cost of concrete to be paid separately) fixing with adjustable lugs (200 mm long & 1.0 mm thick) and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: a) Profile B of 1.60mm thick single rebate of size 80mmx50mm, Fixing with adjustable lugs with split end tail to each jamb.

Providing and fixing pressed steel door frames made of 1.6 mm thick steel profile conforming to IS: 4351 manufactured from commercial mild steel sheet including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.60 mm pressed mild steel welded or rigidly fixed together by mechanical means, including 2.5mm thick M.S. pressed butt hinges, with mortar guards, lock strike-plate and shock absorbers as specified filling the frame with Cement Concrete 1:3:6 at site before fixing (cost of concrete to be paid separately) fixing with adjustable lugs (200 mm long & 1.0 mm thick) and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: b) Profile C of 1.60mm thick single rebate of size 100mmx50mm, Fixing with adjustable lugs with split end tail to each jamb.

Providing and fixing pressed steel door frames made of 1.6 mm thick steel profile conforming to IS: 4351 manufactured from commercial mild steel sheet including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.60 mm pressed mild steel welded or rigidly fixed together by mechanical means, including 2.5mm thick M.S. pressed butt hinges, with mortar guards, lock strike-plate and shock absorbers as specified filling the frame with Cement Concrete 1:3:6 at site before fixing (cost of concrete to be paid separately) fixing with adjustable lugs (200 mm long & 1.0 mm thick) and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: c) Profile E of 1.60mm thick double rebate of size 115mmx50mm, Fixing with adjustable lugs with split end tail to each jamb.

Providing and fixing ISI marked flush door shutter 35mm thick including ISI marked Stainless Steel butt hinges with necessary screws, conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutter.

Providing and fixing ISI marked flush door shutter 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. Piano hinges IS: 3818 marked with necessary screws, conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutter.

Providing and fixing 18mm thick Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately).

Providing and fixing 25mm thick Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately).

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).

Providing and fixing 2nd class teak wood 35 mm thick wire gauze shutters with ISI marked stainless steel butt hinges of required size, using galvanised M.S. wire gauze of average width of aperture 1.4mm in both direction with wire of dia. 0.63 mm for doors, windows and clerestory windows with hinges and necessary screws complete all as specified and directed.

Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete and fixing with 2nd class teak wood beading 62x19mm.

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : a) 250 x 10mm

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : b) 200 x 10mm

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : c) 150 x 10mm

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : d) 100 x 10mm

Providing and fixing bright finished brass handles with necessary screws etc. complete. a) 125mm

Providing and fixing bright finished brass handles with necessary screws etc. complete. b) 100mm

Providing and fixing bright finished brass sliding door bolts with nuts and screws etc complete of size 300 x 16mm.

Providing and fixing bright finished brass 100 mm mortice latch and lock ISI marked with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles with necessary screws etc. complete (Best make of approved quality)

Providing and fixing special quality bright finished brass cupboard or wardrobe locks with four levers including necessary screws etc. complete (best make of approved quality) : a) 50mm

Providing and fixing special quality bright finished brass cupboard or wardrobe locks with four levers including necessary screws etc. complete (best make of approved quality) : b) 75mm

Providing and fixing 50 mm bright finished brass cup board or wardrobe knob with necessary screws (best make of approved quality)

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. approved quality). Twin rubber stopper

Providing and fixing IS : 12817 marked stainless steel butt hinges of size 100x58x1.90mm with stainless steel screws etc. complete :

Providing M.S. Piano hinges of overall width 50mm, ISI marked IS: 3818 finished with nickel chromium plating grade I as per IS: 1068 and fixing with necessary screws etc., complete.

Providing and fixing bright finished brass hasp and staple of 150mm (safety type) with necessary screws etc. complete:

Providing and fixing magnetic catcher double strip (horizontal type) in cupboard / ward robe shutters including fixing with necessary screws etc. complete (Best make of approved quality).

Providing and fixing stainless steel soft closing heavy type telescopic drawer channels of approved make 500 mm long with screws etc. complete as per directions of Engineer- in-charge.

Providing and fixing sliding arrangement in racks/ cupboards/cabinets shutter by P/F stainless steel rollers to run inside C or E aluminium channel section (The payment of C or E channel shall be made separately)

Providing and fixing rubber buffers with screws complete

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.

Providing 2nd class teak wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or dash fastener shall be paid for separately).

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand: 6 graded stone aggregate 20mm nominal size).

Providing and fixing fancy type Stainless steel SS grade 304 , curtain rod 20 mm dia 1.20mm thick

Providing and fixing Stainless steel SS grade 304, brackets ( curtain rod) 20 mm dia 1.20mm thick

Providing and fixing fancy type Stainless steel SS grade 304 , curtain rod 25 mm dia 1.20mm thick

Providing and fixing Stainless steel SS grade 304, brackets ( curtain rod) 25 mm dia 1.20mm thick

Providing and fixing double coat hook stainless steel fancy type superior quality with screws and rawl plugs complete for wardrob complete all as specififed.

Providing and fixing cloth hanging hooks stainless steel 304 grade C-type having 5/6 hooks on one plate with stainless steel screws and rawl plugs complete.

STEEL WORKS

Providing and fixing stainless steel (Grade 304) railing made of Hollowtubes, channels, plates etc. including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete i/c fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer- in-charge. (For payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)

Providing and fixing 8 mm thick toughened glass including all connectors and fixing accessories all complete for staircase railing, balcony railing and partitions, cubicals etc. As per direction of Engineer-in-Charge.

ROOFING & WATERPROOFING WORKS

Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of : a) Ist course of applying cement slurry @ 4.4 Kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including roundingoff junction of vertical and horizontal surface. b) IInd course of 20mm cement plaster 1:3 (1 cement: 3 sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. c) IIIrd course of applying blown or residual bitumen applied hot at 1.7 Kg. per sqm of area. d) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 Kg/sqm.) (with 5 years service guarantee)

Supplying and Stacking Filling sunken floor with over burnt jhama brick aggregate 120mm to 40mm including compacting of materials complete as specified and directed for all levels.

M&L 12mm thick Cement plaster of mix 1: 4 (1 Cement : 4 Coarse Sand) over roof including mixing with required water proofing compound as per manufacturer's specification or direction of Consultant and finishing concrete surface even & smooth. Note: Water proofing compound shall be paid separately.

Providing & mixing water proofing compound `CICO' or equivalent @ 1.5 Kg. per bag of cement used or as directed.

Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/ 450N/5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : 3 mm thick

Extra for covering top of membrane with Geotextile, 120 gsm non woven, 100% polyester of thickness 1 to 1.25 mm bonded to the membrane with intermittent touch by heating the membrane by Butane Torch as per manufactures recommendation.

Providing Grading roof for receiving water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) complete all as specified and directed by engineer-in-charge.

Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner.

S & F Plain, galvanised mild steel sheeting 0.80mm thick in covering to crumple joint, steeped flashing with welded or soldered or by fixing screw/nut bolts joints are provided complete all as specifed and as directed.

S & F 50mm thick expansion joint filler board is manufactured from water resistant, bitumen impregnated, cane fibre as in crumple joint in concrete slab and wall in horizontal/vertical portion, Joint Filler displays excellent resistance to compression, with outstanding recovery characteristics and the board conform specification as per IS 1838(Part-I) 1983 Standard Test of Expansion Joint Fillers, complete all as per manufacturer's specification and as directed.

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75 mm deep chase

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.

Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage. (a) For vertical surface two coats @ 0.70 kg per sqm

Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage. (b) For horizontal surface one coat @1.10 kg per sqm.

ALUMINIUM WORKS

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing glazing with float glass panes of 4.0mm thickness (weight not less than 10 kg/sqm) in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item).

Providing and fixing glazing with float glass panes of 5.0 mm thickness (weight not less than 12.50 kg/sqm) in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item).

Providing and fixing glazing with froasted glass panes of 4.0mm thickness (weight not less than 10 kg/sqm) in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item).

Providing and fixing Stainless steel (grade 304) fly proof wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides to windows, clerestory windows and doors with aluminium snap beading complete. (Cost of aluminium snap beading shall be paid in basic item).

Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-Charge. (Only weight of grill to be measured for payment).

Providing and fixing double action hydraulic floor spring With stainless steel cover plate minimum 1.25 mm thickness of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.

Providing and fixing Powder coated (minimum thickness 50 micron) aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick and length as required with SS screws etc. complete as per direction of Engineer-in-Charge.

Providing and fixing Brass 100 mm mortice latch and lock with 6 levers without pair of handles(best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.

Providing and fixing Powder coated (minimum thickness 50 micron) aluminium casement windows fastener of required length for aluminium windows with necessary screws etc. complete.

Providing and fixing powder coated (minimum thickness 50 micron) aluminium round shape handle of outer dia 100mm with SS screws etc. Complete as per direction of Engineer-in-Charge

Filling the gap in between aluminium frame and adjacent RCC/Brickwork/ Stone Work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge. Upto 5mm depth and 5mm width

Providing and fixing EPDM/neoprene gasket for fixing glass with the window frame complete all asspecified and as directed.

MISCELLANEOUS WORK

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. (a) In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. (b) In gratings, frames, guard bar, ladders, railings, brackets, gates and similar works.

Providing and fixing PVC Rungs of size 270mm x 165mm x 25mm, U type wight not less thn 900gms ofeach steps for going in water tank complete all as manufacturers specifications.

Providing and fixing false ceiling at all heights with 15 mm thick integral densified micro look edged non- cementitious light weight calcium silicate false ceiling tile reinforced with fibre and natural filler falseceiling tiles of Size 595x595 mm of approved texture, design and patterns having NRC (Noise Reduction Coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part- 4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM 518:1991, in true horizontal level suspended on interlocking metal powder coated T-Grid of hot dipped galvanised iron section of 0.40 mm thick on Silhouette profile,rotary stiched double webbed white with 6mm reveal profile (white/black), comprising of main-T runners of size 15x42mm of length 3000 mm, cross - T of size 15x42 mm of length 1200mm and secondary intermediate cross- T of size 15x42 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.

Providing and fixing in true horizontal level 600 mm. X 600 mm. false ceiling system manufactured by M/s. Armstrong World Industries using hot dipped galvanized steel section, exposed surface with pre-coated capping, main tee of size 15 x 32 mm., having 0.27 mm gauge at every 1200 mm. centre to centre maximum and rotary stitched cross tee of size 15 x 32 mm, having 0.27 mm gauge at every 600 mm. c/c. and sub cross tee of size 15 x 32 mm, having 0.25 mm gauge at 1200 mm c/c. and wall angle of size 19 x 19 mm., having 0.35 mm gauge fixed to the periphery of the wall. The above grid is suspended at every 1200mm c/c. in both directions using 2.0 mm. thick prestraightened GI wire laying ORCAL LAY-IN STANDARD PERFOARTED MICROLOOK EDGE METAL TILE WITH ACCOUSTICAL FLEECE manufactured and punched in Single Process by M/s. Armstrong World Industries, of size 600mmx600mmx0.5mm having NRC 0.70, Light reflectance of >61% (WT), with standard perforation of 2.5 MM dia. (16% open space), having Fire Performance CLASS O / CLASS 1 (BS 476), surface having global white – baked polyester paint over the formed grid complete.

PLUMBING WORK

Providing and fixing water closet squatting pan (Indian type W.C. pan 585x445x260mm pan ) with L bend and extension make of Jaquar cat no. ECS-WHT-451 or Hindwarecat No. 20076 with 100mm sand cast iron P or S- trap, and 7.2 litre Smart single flush wall hung cistern with installation kit make of Jaquar WHC-WHT-184NL or Hindware cat No. 21001 with all fittings and fixures complete including cutting and making good the wall and floors wherever required complete as directed by Engineer-in-Charge(Contractor Shall Provide 10 year Warrantee certificate and Manufacturer's Test Certificate including copy of invoice of each item).

Providing and fixing white vitreous china Couple Water closet Make of Jaquar cat no. CNS-WHT-755S220SPP and CNS-WHT-207 or Kohler cat no. K-8753T and K-8753T-S or Grohe cat No. 39 119 001 with PP soft closing seat cover, Hinges, fixing Accessories set, Connection pipe with painting complete including cutting and making good the walls where required complete as directed by Engineer-in-Charge (Contractor Shall Provide 10 year Warrantee certificate and Manufacturer's Test Certificate including copy of invoice of each item).

Providing and fixing C.P. brass Hand shower Health Faucet with 1.00 metre long flexible tube with wall hook Make Jaquar Cat No. ALD-577 or Kohler cat no. K - 12927IN-CP or Grohe cat no. 27 513 000 etc including cutting and making good the walls wherever required complete as directed by Engineer-in-Charge (Contractor Shall Provide 10 year Warrantee certificate and Manufacturer's Test Certificate including copy of invoice of each item).

Providing and fixing white vitreous china Oval shape Wash basin of size 555x425x195 mm of make Jaquar cat no. FLS-WHT-5701 or Kohler cat no. K-2240T-0 or Grohe cat no. 39423000 with 32mm dia CP brass waste coupling of Make Jaquar Cat ALD- 705L130 or Kohler cat no. K-9031in-CP or Grohe slotted click basin waste 32mm C.P. brass bottle trap of Make Jaquar Cat no. 769L300x190 or Kohler cat no. K-7314IN-CP and pipe to wall with C.P. brass wall flange and rubber adopter for waste connection, with painting complete including cutting and making good the walls where required complete as directed by Engineer-in-Charge(Contractor Shall Provide 10 year Warrantee certificate and Manufacturer's Test Certificate including copy of invoice of each item).

Providing and fixing white vitreous china Oval shape Wash basin of size 565X425X140 mm of make Jaquar cat no. KUS-WHT-35935 or Kohler cat no. K-2240T-0 or Grohe cat no. 39423000 with 32mm dia CP brass waste coupling of Make Jaquar Cat ALD- 705L130 or Kohler cat no. K-9031in-CP or Grohe slotted click basin waste 32mm C.P. brass bottle trap of Make Jaquar Cat no. 769L300x300 or Kohler cat no. K-7314IN-CP and pipe to wall with C.P. brass wall flange and rubber adopter for waste connection, with painting complete including cutting and making good the walls where required complete as directed by Engineer-in-Charge(Contractor Shall Provide 10 year Warrantee certificate and Manufacturer's Test Certificate including copy of invoice of each item).

Providing and fixing Stainless Steel double bowl undermount kitchen sink of overall size 1040 x 510 x 200mm and bowl size 460 x 410 x 200mm, stainless steel of A ISI-304 quality 1mm thick as per IS-13983 of approved brand with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required :

Providing and fixing C.P. brass sink cock table Mounted with angular knob Jaquar Cat. No. FLR-5347N or Kohler cat no. K-10877IN-4-CP or Grohe cat no. 31 288 000 for Sink complete as directed by Engineer-in-Charge (Contractor Shall Provide 10 year Warrantee certificate and Manufacturer's Test Certificate including copy of invoice of each item).

Providing and fixing bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing stainless steel single towel rail 600mm long make of Jaquar Cat. No. ACN-1111SM or Kohle cat no. K-17521T-CP or Grohe cat no. 40 509 001 etc complete as per direction Engineer-in-Charge (Contractor Shall Provide 10 year Warrantee certificate and Manufacturer's Test Certificate including copy of invoice of each item).

Providing and fixing toilet paper holder make of Jaquar Cat No. ACN-1153S or Kohler Cat No. K-10705D-CP complete as per direction of Engineer-in-charge (Contractor Shall Provide 10 year Warrantee certificate and Manufacturer's Test Certificate including copy of invoice of each item).

Providing and fixing CP Brass Soap dish holder Make of Jaquar Cat No.ACN-1131N or Kohler cat no. K-17528T-CP or Grohe cat no. 40 754 001 complete as per direction of Engineer-in-charge (Contractor Shall Provide 10 year Warrantee certificate and Manufacturer's Test Certificate including copy of invoice of each item).

Providing and fixing CP Brass Soap dispenser with metalic Bottle Make of Jaquar Cat No. ACN-1137N complete as per direction of Engineer-in-charge (Contractor Shall Provide 10 year Warrantee certificate and Manufacturer's Test Certificate including copy of invoice of each item).

Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Tumbler Holder. (Premium Range)

Providing and fixing 15mm C.P. brass Shower Arm Casted 190mm long flat shape for wall mounted shower with flange make of Jaquar cat no. SHA-483 or Kohler cat No. K-16346IN-CP or Ghrohe cat no. 28 576 000 Complete as per direction of Engineer-in-charge (Contractor Shall Provide 10 year Warrantee certificate and Manufacturer's Test Certificate including copy of invoice of each item).

Providing and fixing C.P. brass Over head Shower Dia 105mm of Jaquar cat no. OHS-1709 or Kohler cat no. K-16356IN-CP or Grohe cat no. 26 267 000 etc Complete as per direction of Engineer-in-charge (Contractor Shall be Provide 10 year Warrantee certificat and MTC of each item).

Providing and fixing CP brass Wall Mixer with provision for over head shower with 115mm long bend pipe on upper side connecting legs and wall flange Make of Jaquar cat no. OPP-15117PM or Hindware cat no. F360019 etc complete as per direction Engineer-in-Charge (Contractor Shall Provide 10 year Warranteecertificate and Manufacturer's Test Certificate including copy of invoice of each item).

Providing and fixing 15mm C.P. brass bib cock of Jaquar cat no. OPP-15037PM or Ghrohe cat no. 20 238 000 or Kohler cat no. K - 37319IN-4-CP With wall flange Complete as per direction of Engineer-in-charge (Contractor Shall Provide 10 year Warrantee certificate and Manufacturer's Test Certificate including copy of invoice of each item).

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards andweighing not less than 690 gm, 15 mm nominal bore

Providing and fixing 15mm C.P. brass Pillar cock Make of Jaquar Cat No. OPP-15001PM or Kohler cat no. K-22538IN-CP with including cutting and making good the walls wherever required complete as directed by Engineer-in-Charge (Contractor Shall Provide 10 year Warrantee certificate and Manufacturer's Test Certificate including copy of invoice of each item).

Providing and fixing C.P. brass single Lever Basin Mixer without Pop-up waste with 450mm Long Braided hoses Make of Jaquar Cat No. OPP-15011BPM or Kohler cat no. K-16027IN-4DN-CP or Grohe cat no. 23 819 000 with including cutting and making good the walls wherever required complete as directed by Engineer-in-Charge (Contractor Shall Provide 10 year Warrantee certificate and Manufacturer's Test Certificate including copy of invoice of each item).

Providing and fixing 15mm C.P. brass Concealed stop cock consisting Concealed body with wall flage make of Jaquar cat no OPP-15083KPM and ALD-083 or Grohe cat no. 19 917 000 and cat no. Kohler cat no. K - 11739IN-9-CP complete as directed by Engineer-in-charge (Contractor Shall be Provide 10 year Warrantee certificat and MTC of each item).

Providing and fixing C.P. brass 2-way Bib cock make of Jaquar Cat. No. OPP-15041PM or Grohe cat no. 20 248 000 or Kohler cat no. K - 37320IN-4-CP With wall Flange complete as directed by Engineer-in-Charge (Contractor Shall Provide 10 year Warrantee certificate and Manufacturer's Test Certificate including copy of invoice of each item).

Providing and fixing 15mm C.P. brass angular stop cock with wall flage make of Jaquar cat no OPP-15053PM or Grohe cat no. 26 021 000 or Kohler cat no. K - 37317IN-4A-CP With wall flange etc complete for mixer and geyser points as directed by Engineer-in-charge (Contractor Shall Provide 10 year Warrantee certificate and Manufacturer's Test Certificate including copy of invoice of each item).

Providing and fixing 15 mm dia 450mm long unplasticized PVC connection pipe with brass union complete all as specified.

Providing and fixing UPVC trap ofself cleaning design complete. Including cost of cutting and making good the wall and floors. 100 mm inlet and 75 mm outlet

Providing and fixing 100mm dia C.P. brass grating of approved quality and make conforming to IS: specification.

Providing and fixing 32mm dia GI waste pipe including painting with two coats of bitumastic paint, wrapping with applying a final coat of bitumastic paint (for pipes in chase or under floor) conforming to IS:1239 (Medium Class) complete with GI fittings and clamps including cutting and making good the walls for wash basins and kitchen sinks etc. disposal with waste connection etc. complete.

Providing and fixing 40mm dia GI waste pipe including painting with two coats of bitumastic paint, wrapping with applying a final coat of bitumastic paint (for pipes in chase or under floor) conforming to IS:1239 (Medium Class) complete with GI fittings and clamps including cutting and making good the walls for wash basins and kitchen sinks etc. disposal with waste connection etc. complete.

Providing and fixing automatic hand dryer machine, ABS Plastic, HSD-02 Model, AC220V, 1800 w, electronic sensor operated complete all as per manufacturersspecification.

Providing and fixing glass corner glass shelf chrome finished of size 10" x 10" with edges round off, with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. Make ; Jaquar/Hindware/Parryware/Marc

Providing and fixing CP Brass Glass self Make of Jaquar Cat No.ACN-1171N or Kohler cat no. K-17520T-CP complete as per direction of Engineer-in-charge (Contractor Shall Provide 10 year Warrantee certificate and Manufacturer's Test Certificate including copy of invoice of each item).

Providing and fixing C.P brass air purifier container fix to wall with PVC rawl plug with C.P screws complete in respects.

Providing and fixing CP Brass Towel Rack Make of Jaquar Cat No. ACN-1181FHS or Kohler cat no. K-17529T-CP complete as per direction of Engineer-in-charge (Contractor Shall Provide 10 year Warrantee certificate and Manufacturer's Test Certificate including copy of invoice of each item).

Providing and fixing white vitreous china Wall Hung Flat Back Urinal (Urinal pot size 480X 300 X 740 mm) make Jaquar cat no. URS-WHT-13255 and 15mm sensotronic mini concealed type flusing valve make Jaquar cat no. SNR-CHR-51097 with all fittings and fixures complete including cutting and making good the wall and floors wherever required complete as directed by Engineer-in-Charge (Contractor Shall Provide 10 year Warrantee certificate and Manufacturer's Test Certificate including copy of invoice of each item).

Providing and fixing Glass Urinal Partition Size 450X900 8mm Frosted Make Jaquar Cat No. JCE-CHR-810UC450X etc complete as per direction Engineer-in-Charge (Contractor Shall Provide 10 year Warrantee certificate and Manufacturer's Test Certificate including copy of invoice of each item).

INTERNAL SOIL, WASTE & RAINWATER PIPE AND FITTINGS

Providing and fixing 75mm dia unplasticised Rigid PVC soil and waste pipes conforming to IS: 13592 Type B including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion. Single socketed pipes for working pressure of 4 kg/sqcm. (minimum wall thickness 3.2mm), in any length, fixed to wall, laid in trenches or in floors complete all as specified and directed.

Providing and fixing 110mm dia unplasticised Rigid PVC soil and waste pipes conforming to IS: 13592 Type B including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion. Single socketed pipes for working pressure of 4 kg/sqcm. (minimum wall thickness 3.2mm), in any length, fixed to wall, laid in trenches or in floors complete all as specified and directed.

Providing and fixing 75mm dia unplasticised PVC moulded plain bend/elbow for unplasticised Rigid PVC soil and waste pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.

Providing and fixing 110mm dia unplasticised PVC moulded plain bend/elbow for unplasticised Rigid PVC soil and waste pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.

Providing and fixing unplasticised PVC moulded single Y without door of 75mm for unplasticised Rigid PVC soil and waste pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.

Providing and fixing unplasticised PVC moulded single Y without door of 110mm for unplasticised Rigid PVC soil and waste pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.

Providing and fixing unplasticised PVC moulded double Y without door of 75mm for unplasticised Rigid PVC soil and waste pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.

Providing and fixing unplasticised PVC moulded double Y without door of 110mm for unplasticised Rigid PVC soil and waste pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.

Providing and fixing unplasticised PVC moulded single Y with door of 75mm for unplasticised Rigid PVC soil and waste pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.

Providing and fixing unplasticised PVC moulded single Y with door of 110mm for unplasticised Rigid PVC soil and waste pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.

Providing and fixing unplasticised PVC moulded double Y with door of 75mm for unplasticised Rigid PVC soil and waste pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.

Providing and fixing unplasticised PVC moulded double Y with door of 110mm for unplasticised Rigid PVC soil and waste pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.

Providing and fixing unplasticised PVC moulded single tee with door of size 75 x 75 x 75mm for unplasticised Rigid PVC soil and waste pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.

Providing and fixing unplasticised PVC moulded single tee with door of size 110 x 110 x 110mm for unplasticised Rigid PVC soil and waste pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.

Providing and fixing unplasticised PVC moulded single tee without door of size 75 x 75 x 75mm for unplasticised Rigid PVC soil and waste pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.

Providing and fixing unplasticised PVC moulded single tee without door of size 110 x 110 x 110mm for unplasticised Rigid PVC soil and waste pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.

Providing and fixing unplasticised PVC moulded coupler/socket 75mm dia for unplasticised Rigid PVC soil and waste pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.

Providing and fixing unplasticised PVC moulded coupler/socket 110mm dia for unplasticised Rigid PVC soil and waste pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.

Providing and fixing Unplasticised - PVC pipe clips of approved design to 75mm dia Unplasticised - PVC soil and waste pipes by means of bombay nail of required length including and making good the wall etc. complete.

Providing and fixing Unplasticised - PVC pipe clips of approved design to 110mm dia Unplasticised - PVC soil and waste pipes by means of bombay nail of required length including and making good the wall etc. complete.

Providing and fixing unplasticised PVC moulded reducer coupler 110 x 75mm dia for unplasticised Rigid PVC soil and waste pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.

Providing and fixing unplasticised PVC moulded vent cowl 110mm dia for unplasticised Rigid PVC soil and waste pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.

Providing and fixing 180 x 150mm size P type square- mouth S.W. gully trap class SP1 complete with C.I. grating with well burnt bricks masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70kg as per standard design :

WATER SUPPLY(INTERNAL + EXTERNAL)

Excavating trenches of required width for pipes, cables, etc. including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m including getting out theexcavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : (No extra lift is payable if work is done by mechanical means) in all kinds of soil (a) Pipes, cables etc., not exceeding 80 mm dia.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work exposed on wall (a) 15 mm dia

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work exposed on wall (b) 25 mm dia

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work exposed on wall (c) 40 mm dia

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Concealed pipe including painting with anti corrosivebitumastic paint, cutting chases and making good the wall. (a) 15 mm dia

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. External work : including trenching and refilling etc. (a) 40 mm dia

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : (a) 15 mm dia

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : (b) 25 mm dia

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : (c ) 40 mm dia

Providing and fixing 25mm dia nominal bore ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :

Constructing masonry Chamber 60x60x75 cm inside, in brick work With common burnt clay bricks of 25 kg /sqcm compressive strength. in cement mortar 1:4 (1 cement : 4 sand) for sluice valve, with C.I. surface box 100mm. top diameter, 160 mm bottom diameter and180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement :2 sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design

EXTERNAL SEWERAGE & STORM WATER DRAINAGE SYSTEM

Excavating trenches of required width for pipes, cables, etc. including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m including getting out theexcavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : (No extra lift is payable if work is done by mechanical means) in all kinds of soil Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia.

Extra for excavating trenches for pipes, cables etc. in all kinds of soil for depth exceeding 1.5 m, but not exceeding 3 m. (Rate is over corresponding basic item for depth up to 1.5 metre).

Providind, laying and jointing 150 mm dia to 160 mm dia HDPE Double Wall corrugated (DWC) pipes complete all as specified and as directed. (excavation to be paid seperately)

Providind, laying and jointing 200 mm dia HDPE Double Wall corrugated (DWC) pipes complete all as specified and as directed. (excavation to be paid seperately)

Providind, laying and jointing 300mm dia HDPE Double Wall corrugated (DWC) pipes complete all as specified and as directed. (excavation to be paid seperately)

Providing and laying cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) up to haunches of 160mm dia PVC pipes including bed concrete as per standard design, complete all as specified and as directed.

Providing and laying cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) up to haunches of 200mm dia PVC pipes including bed concrete as per standard design, complete all as specified and as directed.

Providing and laying cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) up to haunches of 300mm dia PVC pipes including bed concrete as per standard design, complete all as specified and as directed.

Constructing brick masonry manhole with well burnt bricks in cement mortar 1:4 ( 1 cement : 4 sand ) R.C.C. top slab with Cement Concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stoneaggregate 20mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be notless than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :

Constructing brick masonry manhole with well burnt bricks in cement mortar 1:4 ( 1 cement : 4 sand ) R.C.C. top slab with Cement Concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stoneaggregate 20mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) :

Extra for depth for manhole constructed with well burnt bricks of inside size 90 x 80cm beyond 45cm.

Extra for depth for manhole constructed with well burnt bricks of inside size 120 x 90cm beyond 90cm.

ROAD DRAINAGE

Excavating trenches of required width for pipes, cables, etc. including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m including getting out theexcavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : (No extra lift is payable if work is done by mechanical means) in all kinds of soil Pipes, cables etc. exceeding 300 mm dia but not exceeding 600 mm.

Extra for excavating trenches for pipes, cables etc. in all kinds of soil for depth exceeding 1.5 m, but not exceeding 3 m. (Rate is over corresponding basic item for depth up to 1.5 metre).

Providing and laying 300 mm dia reinforced cement concrete, NP-2 (Non pressure type -2) pipes with collars jointed with stiff mixtures of cement mortar in the proportion of 1:2 ( 1 cement : 2 fine sand ) including jointing and testing complete in all respect.

Providing and laying 450 mm dia reinforced cement concrete, NP-2 (Non pressure type -2) pipes with collars jointed with stiff mixtures of cement mortar in the proportion of 1:2 ( 1 cement : 2 fine sand ) including jointing and testing complete in all respect.

MISCELLANEOUS ITEMS , PUMPS AND EQUIPMENTS

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. (a) In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete

ROAD & DEVELOPMENT

NOTE :- The slope/camber shall be provided during earth work only so that uniform thickness of all other layers can be maintained. Excavation for road work in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting suitable earth to the embankment location and disposing off unsuitable earth with all lifts and lead upto 1000m as per relevent clauses of section-300 of specification.

Removal of unserviceable soil including excavation, loading and disposal upto 1000 metres lead but excluding replacement by suitable soil which shall be paid separately as per clause 305.

With hard muram having CBR >12 % at under floors including watering, ramming and compacting (minimum compaction 95% of MDD) in layers not exceeding 20cm in thickness and dressing complete. (Note:- maximum thickness of this layer to be provided shall be 30cm

Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. 16.78.1 With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-30

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density in accordance to Table No. 400-12, 400-13 and as per clause of section 406 of specifications.

Construction of cement concrete kerb with channel with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade PCC on M15 grade foundation 150 mm thick, kerb channel 300 mm wide, 50 mm thick in PCC M20 grade, sloped towards the kerb, kerb stone with channel laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 409. Using concrete mixer.

Plain cement concrete M-7.5 Nminal mix with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days. as per MORT&H Specification 409.

Providing and applying tack coat using hot straight run bitumen of grade VG - 10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications : (a) On W.B.M. @ 0.75 Kg / sqm

Providing and applying tack coat using hot straight run bitumen of grade VG - 10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications : (b) On bituminous surface @ 0.50 Kg / sqm

Providing and laying Bitumen Penetration Macadam with hard stone aggregate of quality, size and grading as specified, with bitumen of suitable penetration grade, including required key aggregate as specified, spreading coarse aggregate with the help of self propelled/ tipper tail mounted aggregate spreader and applying bitumen by a pressure distributor and then spreading key aggregate with the help of aggregate spreader complete, including consolidation with road roller of minimum 8 to 10 tonne capacity to achieve specified values of compaction and surface accuracy : (a) For 50mm compacted thickness using coarse aggregate of size 50-20 mm graded @ 0.60 cum per 10 sqm key aggregate of size 12.5 mm graded @ 0.15 cum per 10 sqm. With paving asphalt grade VG - 10 @ 50 kg/ 10 sqm.

2.5 cm premix carpet surfacing with 2.25 cum and 1.12 cum of stone chippings of 13.2 mm and 11.2 mm size respectively per 100 sqm and 52 kg and 56 kg of hot bitumen per cum of stone chippings of 13.2 mm and 11.2 mm size respectively, including a tack coat with hot straight run bitumen, including consolidation with road roller of 6 to 9 tonne capacity etc. complete (tack coat to be paid for separately). (a) With paving Asphalt grade VG - 30 with no solvent

Providing and laying seal coat of premixed fine aggregate ( passing 2.36 mm and retained on 180 micron sieve) with bitumen using 128 kg of bitumen of grade VG - 10 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface, including rolling and finishing with road roller all complete.

Providing and fixing at or near ground level factory made RCC pavement slab of M-30 grade of size 450x450x50 mm, including reinforcement with 6 mm dia M.S. bars 4 nos on each side, including setting in position in footpath to the required level and line over a bed of 20 mm average thick cement mortar 1:5 (1 cement : 5 coarse sand), having joint thickness not more than 5mm except on curve, including filling of joints with same cement mortar and making grooves etc. complete as per direction of Engineer-in-charge.

Providing and applying 2.5 mm thick road marking strips (retro- reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications.

Providing and applying Painting lines, dashes, arrows etc on roads in two coats on new work with ready mixed road Grade-I marking paint (cold applied reflective paint) conforming to IS:164 on concrete/bituminous surface, including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control. Up to 10 cm in width.

Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer-in- charge. (The panel shuttering work shall be paid for separately).(Note:- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/ recoverable separately).

Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.

Providing and laying random rubble masonry with hard stone (locally available stone) in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggretage 20mm nominal size) at plinth level in CM 1:6 (1 cement : 6 coarse sand). Joints shall be raked to a minimum depth of 15mm by a raking tool during the progress of work while the mortar is still green.

Providing and laying plain cement concrete M-15 Grade concrete with 20mm nominal size graded stone aggregate as in coping to retaining walls, return walls, walls (any thickness) including attached pilasters, columns, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets etc. upto floor two level, excluding the cost of centering, shuttering and finishing :

Providind, laying and jointing 150 mm dia to160 mm dia HDPE Double Wall corrugated (DWC) pipes (excavation to be paid seperately)

(xvi) Car door: S.S. (stainless steel) hairline finish centre/telescopic opening door with vision panel. (xvii) Landing door: S.S. (stainless steel) hairline finish centre/telescopic opening door with vision panel. (xviii) Door operation: Automatic electric power operated door, full height infrared curtain with multiple criss/cross light beams. (xix) Car interior: S.S. (stainless steel) panel with hair line finish on all sides. (xx) Car floor: Anti skid PVC flooring on heavy duty M S (mild steel) platform. (xxi) Car ceiling & lighting: S. S. (stainless steel) finish with aesthetic appearance with LED ceiling lights (xxii) Carventilation: Pressure fan/blower fan (car fan with automatic sleep timer shall be provided). (xxiii) Emergency lighting in car: Battery operated emergency lighting in the lift car. (xxiv) Intercom system: Battery operated intercom system in lift car, machine room and ground floor/control room. (xxv) Emergencyalarm: Battery operated alarm bell system in lift car & control room / ground floor. (xxvi) Position of machine room: Directly above the hoist- way. (xxvii) Electric power supply: AC 415 V, 3 phases 50 Hz & AC 230 V 1phase 50Hz terminated in machine room.

(xxviii) Fire man switch : Fire man switch at machine room/terminal landing (xxix) All car panel buttons and all floor switches must be with Braille language as per lift act. (xxx) Audio visual indication in the lift car showing overloading shall be provided such that doors keep open till excess load is removed. (xxxi) Spring buffer/hydraulic buffer shall be provided (xxxii) Mechanical over speed governor, door key holes in the floor doors shall be provided. (xxxiii) Lift machine hoisting arrangement in the lift machine room and monkey ladder for lift pit should be provided by the lift agency, along with the other steel structure works, foundations for the machines etc. (xxxiv) In the hoist way fascia plate shall be provided. (xxxv) Permanent wiring in lift machine room and lift well with proper no. of light points, with fixtures, exhaust fan, plug points and 3 phase 440V power supply shall be made in lift shaft by the department, machine room or at desired level. (xxxvi) Car top safety barricade shall be provided.

(xxxvii) ARD (automatic rescue device): Solid state inbuilt automatic rescue device (ARD) automatically rescues passengers trapped in the lift car in between floors in the event of power failure. Automatic operation and immediate action in the event of mains failure, capable of moving the lift to the nearest landing, opens the automatic door of the lift car and floor. Sealed maintenance free battery backup with automatic charging unit and auto changeover device on mains failure. 8 Passenger (544Kg.)

Add extra to item no. 1 for every additional floor beyond initial G+ 1 floor (additional stops beyond two stops) provides all necessary additional parts/equipments as per manufacturer's requirement. Cost for each additional floor : upto 4 stops each (For 08 Passengers)

ELECTRICAL INTERNAL SECTION MATERIAL

Providing and fixing switches piano, flush type single pole, one way 15/16 Amps 230 volt AC supply, ISI marked complete all as specified and directed.

Providing and fixing socket outlet two in one 5 pin 5/6 Amps flush type, 230 volt AC supply complete all as specified and directed.

Ceiling mounted Cool Day Light Panel Light 1 x 36 Watts energy efficient light material aluminium powder coated complete with all accessories. SYSKA Part No. ‎5605169033408)

Surface rond ceiling light (white) 1 x 18 watts LeD, energy efficient light, complete with all accessories. (PHILIPS Part No. 588973113).

Supply,fixing and testing battern LED luminaire 1x22W LED Integrated sleek extruded polycarbonate LED channel including LED tube 22 W and connecting up with twin core twisted flexible copper conductor from ceiling rose to fitting MOD No. SSK-SQ-2201 (6500k) Make :Syskaj or equivalent make in Crompton Greaves, C&S.

Supply,fixing and testing battern LED luminaire 1x22W LED Integrated sleek extruded polycarbonate LED channel including LED tube 22 W wall mounted including all necessary accessories. Make :Syskaj or equivalent make in Crompton Greaves, C&S.

Supply,fixing and testing PHILIPS Slimline 10-Watt LED Batten, Cool Day Light, 2 feet wal mounted including necessary fixture as required.

1 x 11 W CFL SU , 11 W , mirror night compact and & decorative luminaire with anti glare diffuser & decorative end caps Make:Cat no- LHFOECF1OZ1W011 or equivalent model of Havells or Anchor or bajaj

10W LED Bulkhead luminary with IP66 IK08 protection, 600Lumens complete in all respect.(Philips Cat no. WT 202W LED 6S PSU S1 PC)

140W LED Street lighting luminary suitable for pole/ wall mounting with Single piece die cast aluminium housing IP66 Class 1 protection, toughened glass, 7000 Lumens complete with all accessories. (Philips Cat no. BRP322 LED140 CWHE MRPC S3)

1200mm dia sweep ceiling fan with standard down rod, of Crompton, Usha, Bajaj make.

Providing and fixing Stepped type Modular Fan regulator (2 module)

300mm dia heavy duty 900 RPM exhaust fan complete with louvered shutters

Providing and fixing water cooling machine of 150 liter/hour production rate with 150 liters storage for drinking water. (Make : VOLTAS, BLUESTAR)

Providing and fixing good quality RO of Aqua guard or equivalent with ultra violet lamp, TDS etc suitable for treating approx. 150 lits / hr of water flow for drinking water production make.

Providing and fixing in position storage type vertical electrical water heater with copper container, · Moulded PUF insulation for less energy consumption , and stove enameled M.S. Jocket, thermostatically controlled immersion heater, with pilot lamp, 15/20mm dia inlet with non-return valve and 15/20mm dia outlet including making connections complete in all respects (wall mounted with suitable M.S bolts and nuts) AO Smith / Racold /Jaquar make. a) Capacity 15 liter

Providing and fixing in position storage type vertical electrical water heater with copper container, · Moulded PUF insulation for less energy consumption , and stove enameled M.S. Jocket, thermostatically controlled immersion heater, with pilot lamp, 15/20mm dia inlet with non-return valve and 15/20mm dia outlet including making connections complete in all respects (wall mounted with suitable M.S bolts and nuts) AO Smith / Racold /Jaquar make. a) Capacity 25 liter

ELECTRICAL INTERNAL SECTION WORK

PVC INSULATED COPPER CONDUCTOR WIRING IN STEEL CONDUIT Copper point wiring in steel conduit : Material & Labour for point wiring complete with 1.5 sqmm multi stranded copper conductor single core PVC insulated unsheathed FRLS cable 1100 grade (ISImarked) with proper colour coding drawn through and non metalic rigid PVC medium grade conduit not less than 20mm dia and conduit accessories (ISI marked) concealed in wall/fixed to roof, ceiling etc including provision of 1.5 sqmm PVC insulated multistranded unsheathed copper conductor cable FR-LS (ISI marked) as earth continuity conductor connected to common earth dolly, fabricated sundry terminal box made out of GI sheet steel not less than 1.22mm thic for boxes upto a size of 200 x 300 mm and above this size not less than 1.63 mm thick duly painted with aluminnium inside and anti-corrosive paint out side, concealed in walls, with 3mm thick bakelite/plastic laminated sheet top cover fixed with cadmium plated iron screws for housing switches, socket outlets, fan regulators etc duly earthed including cutting chases of existing wall for conduits and sinking for boxes. Connections of cable with MCBs or bus bar shall be done through proper size copper/brass thimbles. Where concealing of conduit is not feasible i.e. on surface of roof etc. conduit shall be fixed on surface with necessary saddles at no extra cost all as specified and as directed for the following :- a) One Light/Fan/Exhaust Fan/wall mounted fan point controlled by one way switch 5/6 Amps, 230 V.

Material & Labour for point wiring complete with 1.5 sqmm multi stranded copper conductor single core PVC insulated unsheathed FRLS cable 1100 grade (ISImarked) with proper colour coding drawn through and non metalic rigid PVC medium grade conduit not less than 20mm dia and conduit accessories (ISI marked) concealed in wall/fixed to roof, ceiling etc including provision of 1.5 sqmm PVC insulated multistranded unsheathed copper conductor cable FR-LS (ISI marked) as earth continuity conductor connected to common earth dolly, fabricated sundry terminal box made out of GI sheet steel not less than 1.22mm thic for boxes upto a size of 200 x 300 mm and above this size not less than 1.63 mm thick duly painted with aluminnium inside and anti-corrosive paint out side, concealed in walls, with 3mm thick bakelite/plastic laminated sheet top cover fixed with cadmium plated iron screws for housing switches, socket outlets, fan regulators etc duly earthed including cutting chases of existing wall for conduits and sinking for boxes. Connections of cable with MCBs or bus bar shall be done through proper size copper/brass thimbles. Where concealing of conduit is not feasible i.e. on surface of roof etc. conduit shall be fixed on surface with necessary saddles at no extra cost all as specified and as directed for the following :- b) One 3 pin socket outlet, 5/6 Amps point on the same board with other switches.

Material & Labour for point wiring complete with 1.5 sqmm multi stranded copper conductor single core PVC insulated unsheathed FRLS cable 1100 grade (ISImarked) with proper colour coding drawn through and non metalic rigid PVC medium grade conduit not less than 20mm dia and conduit accessories (ISI marked) concealed in wall/fixed to roof, ceiling etc including provision of 1.5 sqmm PVC insulated multistranded unsheathed copper conductor cable FR-LS (ISI marked) as earth continuity conductor connected to common earth dolly, fabricated sundry terminal box made out of GI sheet steel not less than 1.22mm thic for boxes upto a size of 200 x 300 mm and above this size not less than 1.63 mm thick duly painted with aluminnium inside and anti-corrosive paint out side, concealed in walls, with 3mm thick bakelite/plastic laminated sheet top cover fixed with cadmium plated iron screws for housing switches, socket outlets, fan regulators etc duly earthed including cutting chases of existing wall for conduits and sinking for boxes. Connections of cable with MCBs or bus bar shall be done through proper size copper/brass thimbles. Where concealing of conduit is not feasible i.e. on surface of roof etc. conduit shall be fixed on surface with necessary saddles at no extra cost all as specified and as directed for the following :- c) One 3 pin 5 amps socket outlet point on independent board.

All as per item Sl. No. 01 here in before but wiring with 2.5 sq.mm multistranded cable and earth wire with copper conductor of size 2.5 sq.mm for one 5 pin socket outlet 16 Amps on independent board for power plug/geyser point/AC point.

SUPPLYING AND FIXING METAL BOXES

Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in the front including painting etc. as required : 150mm x 150mm x 60mm deep

Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in the front including painting etc. as required : 180mm x 100mm x 60mm deep

Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in the front including painting etc. as required : 200mm x 125mm x 60mm deep

Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in the front including painting etc. as required : 200mm x 150mm x 75mm deep

ERECTION OF FITTINGS AND ACCESSORIES

S/F light plug point accessories (NR): Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch,connection etc. as required. (For light plugs to be used in non residential buildings).

S/F light plug point accessories (NR): Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.

Providing and fixing switches Piano, flush type single pole, one way 5/6 Amps, 230 Volt, AC supply, ISI marked complete all as specified and directed.

Providing and fixing switches piano, flush type single pole, one way 15/16 Amps 230 volt AC supply, ISI marked complete all as specified and directed.

Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.

Supplying and fixing extra down rod of 10 cm length G.I. pipe ,15mm dia, heavy gauge including painting etc. as required. (Note :More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)

MCB'S/RCB'S S/F 5A to 32A L Series MCB:

Supplying and fixing 6 amps to 32 amps rating, 240 volts,miniature circuit breaker of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required (Category-B): 6 amps. to 32 amps. ratings , SP MCB, "C" curve, 10 KA breaking capacity

6 amps. to 32 amps. ratings , SPN MCB, "C" curve, 10 KA breaking capacity

6 amps. to 32 amps. ratings , TP MCB, "C" curve, 10 KA breaking capacity

6 amps. to 32 amps. ratings , TPN MCB, "C" curve, 10 KA breaking capacity

Supplying and fixing single pole, blanking plate in the existing MCB DB complete etc. as required.

Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required: 40 Amps

Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required: 63 Amps

Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required: 40 Amps

Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required: 63 Amps

Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required: 100 Amps

Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commission 25 Amps

Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commission 40 Amps

Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commission 63 Amps

Supplying and fixing following rating, four pole, (three phase and neutral) 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 100milliamperes in the existing MCB DB complete with connections, testing and commissioning 25 amps. rating, 2 pole RCCB, 100mA/ 300mA

Supplying and fixing following rating, four pole, (three phase and neutral) 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 100milliamperes in the existing MCB DB complete with connections, testing and commissioning 40 amps. rating, 2 pole RCCB, 100mA/ 300mA

Supplying and fixing following rating, four pole, (three phase and neutral) 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 100milliamperes in the existing MCB DB complete with connections, testing and commissioning 63 amps. rating, 2 pole RCCB, 100mA/ 300mA

Supplying and fixing 20ams. 240 volts, SPN industrial type socket outlet, with 2 pole and earth metal enclosed plug top alongwith 20 amps. G-series, SP MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket, outle

Supplying and fixing 30 amps, TPN, industrial type socket outlet, with 4 pole and earth metal enclosed, plug top, alongwith 30 amps, G-series, TP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet, and

MCB DISTRIBUTION BOARDS

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess,complete with tinned copper bus bar, neutral bus bar, earth bar,din bar, interconnections, powder painted including earthing etc.as required. (But without MCB/RCCB/Isolator) 2 + 4 way/ 6 way , Double door

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess,complete with tinned copper bus bar, neutral bus bar, earth bar,din bar, interconnections, powder painted including earthing etc.as required. (But without MCB/RCCB/Isolator) 2 + 6 way/ 8 way , Double door

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/recess, complete with tinned copper bus bar, neutral bus bar,earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 4 way (4 + 12), Double door

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/recess, complete with tinned copper bus bar, neutral bus bar,earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 6 way (4 + 18), Double door

DANGER NOTICE PLATES

Providing and fixing M.V. danger notice plate of 200 mm X 150 mm,made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.

LIGHTNING CONDUCTORS

Providing and fixing of lightning conductor finial, made of 25mm, dia, 300mm, long, copper tube, having single progn at top, with 85mm. Dia. 3mm. Thick copper base plate including holes etc. complete as required.

Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any other metallic object) by riveting / nut bolting/sweating and soldering etc as required.

Providing and fixing GI tape 20mm x 3 mm thick on parapet or surface of wall for lightening conductor as required (for horizontal run)

Providing and fixing GI tape 20mm x 3 mm thick on parapet or surface of wall for lightening conductor as required (for vertical run)

Providing and fixing testing joint, made of 20mm x 3mm. Thick, GI strip, 125 mm. Long, with 4 nos. of tinned brass bolts, nuts, check nuts and spring washers etc. complete as required

Providing and laying GI tape, 32mm x 6 mm thick from each electrode directly in ground as required.

EXTERNAL ELECTRICAL WORK

Supply, installation, testing and commissioning of 'Silent Type' diesel generating set comprising with diesel engine 3 Phase, 25 KVA, Air cooled, Synchronous alternator, AMF control panel single/three phase, acoustic enclosure, battery with charger and related accessories including PCC 1:2:4 platform, incoming cable 10 mtr, earthing Cu/GI plate 2No/2No, exhaust pipe 'B' class with insulation as per

Earthing with G.I. earth plate 600mm X 600mm X 6mm thick including accessories and providing masonry encloser in cement mortar, cover plate having locking arrangement on the top and G.I. watering pipe 20mm dia 2.7 metre long etc. (but without charcoal or coke and salt) complete as required

Add extra for using salt and charcoal/coke for G.I. plate or copper plate earth electrode as required including excavation and refilling the pit in all type of soil, murrum

Supply and laying 25mm X 6mm G.I. strip at 0.5 metre below ground level/surface as strip earth electrode including jointing etc. as required.

Supply of XLPE insulated power cable (conforming IS-7098 Part-I) 1100 Volt grade, 6sqmm, 2 core ISI marked with alu. stranded /solid conductor

Supply of XLPE insulated power cable (conforming IS-7098 Part-I) 1100 Volt grade, 16sqmm, 4 core ISI marked with alu. stranded /solid conductor

Supply of XLPE insulated power cable (conforming IS-7098 Part-I) 1100 Volt grade, 25sqmm, 4 core ISI marked with alu. stranded /solid conductor

Supply of XLPE insulated power cable (conforming IS-7098 Part-I) 1100 Volt grade, 50 Sqmm, 3.50 Core ISI marked with alu. stranded /solid conductor

Supply of XLPE insulated power cable (conforming IS-7098 Part-I) 1100 Volt grade, 70 Sqmm, 3.50 Core ISI marked with alu. stranded /solid conductor

Supply of XLPE insulated power cable (conforming IS-7098 Part-I) 1100 Volt grade, 185 Sqmm, 3.50 Core ISI marked with alu. stranded /solid conductor

Supply and laying or fixing or laid in trenches/ ducts/ through pipes/ in floors / under roads/ hard standing /along poles and testing HT cable XLPE, insulated screened, bedded, galvanised steel strip or wire armourd cable (heavy duty) 11000 volt grade with aluminium conductor having cross sectional area 95 Sqmm 3 core conforming to IS-7098 (Part-I -1988) complete all as specified.

Laying of one number armoured / unarmoured power cable 1.1KV grade of size not exceeding 25 sq. mm direct in ground including excavation in all soil/ murrum /soft rock, sand cushioning, protective covering and refilling the pit etc. as required.

Laying of one number armoured / unarmoured power cable 1.1.KV grade of size exceeding 25sq. mm but not exceeding 120 sq. mm direct in ground including excavation in all soil/ murrum/soft rock, sand cushioning, protective covering and refilling the pit etc. as required.

Laying of one number armoured / unarmoured cable 1.1.KV grade of size exceeding 120 sq. mm. but not exceeding 400 sq. mm direct in ground including excavation in all soil/murrum /soft rock, and sand cushioning protective covering and refilling the pit etc. as required.

M&L for providing PCC 1:4:8 type D-2 mix using 40mm graded stone aggregate as in foundation of poles/struts etc including necessary form work as required at site complete all as specified and as directed by the Engineer-in-Charge.

Providing and fixing 50mm bore G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. External work : including trenching and refilling etc.

Supplying, install and errect in true vertical postion steel tublar swaged welded pole 9.00 mtr long conforming to IS 2713 par t II type 410 SP 32 complete with cast iron MS base plate 6mm thick and of size 300x300mm fininal taper pole cap bolts nuts screw etc pole made out of ERW MS tubing inculding of holes of required Nos and size for fixing of cross arms painting with one coat of red oxide primer and two coats of aluminum paint for exposed surface and two coats of black bitumenous paint for portion embedded in concrete painting three singnal red colur bands at lower portion of exposed pole starting from plinth block each band of 200mm height at 300mm spacing painting pole no. the black paint by stenciled letters /figures of 8cm height complete all as specified and diretced

Supplying and fixing of 32mm dia. X 2.00 meter long G.I. pipe (medium class) bracket for mounting of fluorescent/S.V/M.H/L.E.D lamp street light fittings on poles including bending the pipe to the required shape and wiring with 1.5sq.mm W.P./PVC wire etc. as required.

Supplying and fixing flood light with high power LED of 3 to 6 Watt each assembled on single MCPCB and additional unique peanut lens on each LED, system lumens output with efficacy>120 lm/Watt. luminiare having color temp upto 6500K & 50000 hrs. burning life with minimum @ L 70, The colour rendering index of LED light should be more than 70. Luminiare comprises of driver, PF > 0.95 & surge protection 10KV. Housing made of pressure die cast aluminium with heat resistant flat glass, IP65 protection. Submission LM 79-08/IS16106 (2012), IEC60598, IEC61347i/c connection wire, testing etc. to complete the job. 60Watt, color temp 3000-6500k as required.

Supply & fix sintex box of size 195 X 135 X 90 mm Cat No GS-JB-2014 Hinged (L) wiith 2 way terminal mounted on epoxy insulators for looping of cable for 1Phase and 1neutral fixed on pole with the help of MS nuts bolts and MS clamps-2 Nos of size 40 mm X 4 mm thick with one No MCB SP 6 Amp capacity mounted on din rail inside box. work also includes making suitable hole in pole to take out connections to fitting if required at site and provisioning of PVC insulated copper cable from junction box to conector of street light all as specified and directed.

Supplying,testing & commissioning cubicle type free floor mounted front operated (800 A , 4 Pole , 415 V , MDO Microprocessor Based ACB with O/L,S/c,E/F Protection ) With adaptor box having Busbar to connect with existing installed Indoor Type LT Panel made out of 2 mm thick powder coated sheet steel, PVC colour coded aluminium bus bar,(0.8A/sq.mm) 40 x 6 mm aluminium earth tape from end to end of the panel, consisting of RYB phase indecating lamp,ammeter,voltmeter with HRC fuse and suitable rating CT's, all as per single line diagram. (G.A. drawing of panel to be approved before fabrication) NOTE - 1) The above ACB panel shall be installed with existing Main LT Panelafter doing modification,alteration,cutting , painting inclusive all other materials or as per instruction s of Engineer -in Charge .This extention cubicals shall be complete in all respect to connect with existing MLTP. 2) The cost of modification ,altarnation in existing busbars,Cubicals with painting etc shall be inclusive in the rate of extention 800A ACB panel.

Supplying,testing & commissioning cubicle type free floor mounted front operated (1200 A , 4 Pole , 415 V , MDO Microprocessor Based ACB with O/L,S/c,E/F Protection ) With adaptor box having Busbar to connect with existing installed Indoor Type LT Panel made out of 2 mm thick powder coated sheet steel, PVC colour coded aluminium bus bar,(0.8A/sq.mm) 40 x 6 mm aluminium earth tape from end to end of the panel, consisting of RYB phase indecating lamp,ammeter,voltmeter with HRC fuse and suitable rating CT's, all as per single line diagram. (G.A. drawing of panel to be approved before fabrication) NOTE - 1) The above ACB panel shall be installed with existing Main LT Panelafter doing modification,alteration,cutting , painting inclusive all other materials or as per instruction s of Engineer -in Charge .This extention cubicals shall be complete in all respect to connect with existing MLTP. 2) The cost of modification ,altarnation in existing busbars,Cubicals with painting etc shall be inclusive in the rate of extention 1200A ACB panel.

Supplying and fixing 6 Amps to 32 Amps rating, 240 volts, SP MCB, "C"curve, 10 KA breaking capacity in the existing MCB DB complete with connections, testing and commissioning etc. as requiredcoplete all as specified and directed.

Supplying and fixing single pole, blanking plate in the existing MCB DB complete etc. as required.

Supplying and fixing 63Amps rating, 240 Volts, double pole, MCB isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required:

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess,complete with tinned copper bus bar, neutral bus bar, earth bar,din bar, interconnections, powder painted including earthing etc.as required. (But without MCB/RCCB/Isolator). 2 + 12 way / 14 way, Double door

Velji Ratna Sorathia Infra Pvt Ltd

Kumar Infratech and Construction Pvt Ltd

ANV CONSTRUCTION CO.